Very Strange UDP Behaviour
I've been experiencing some very weird behaviour regarding UDP packets. I understand the nature of the problem but I am confused as to what could be causing it. I know that there are a lot of intelligent people on this board so I'm hoping someone might have an idea.
To start with my server receives duplicate packets A LOT. Basically my server is transmitting live voice audio but in order to penetrate picky NAT networks I have each of the clients send a UDP handshake (a single packet) to the server in order. If they don't receive an acknowledgement from the server in a certain amount of time they resend the packet. The server compares the packet with any that it had previously received and ensures that it is from a new location (that it is not a duplicate). Ok so one would think that there would be no problems right?
Well I discovered a real oddity upon shutting down the server, closing all of the ports and closing all of the clients, then restarting it 1 hour later with only 1 client connecting. When the server is waiting for a handshake from the 1 and only client it gets an extra packet leftover from the previous session that took place over 1 hour ago. It is from a client that had been closed down and had all of its sockets closed and hadn't sent a packet to this port in over 1 hour (this much I am sure of). The server doesn't know that it is a duplicate packet because it only has listings of previously received packet addresses from the time that it has been started up, and this is a packet that had somehow been leftover from a session from over 1 hour ago. Why would a leftover UDP packet be lingering around the network and get received so long after it was sent?
I appreciate any input you can give, even if they're just half formed thoughts. I'm really stumped on this one.
Without knowing the code, can't say for sure, but it sounds like the buffer was never cleared on your server.
Typically, a client does not send data over the network until a buffer is full - then it sends the entire buffer. The server typically won't read (input.isReady() should return false) until it's receieve buffer is full.
However, if you kill the server/client processes and restart them - it normally would clear out the buffers - as java does automatic GC pickup.
Try adding a gc() to the termination of the server, and also try making the clients flush() their output streams before closing the connection.
Let us know what happens.
Message was edited by:
watertownjordan
Similar Messages
-
Hello all,
ever since I've upgraded my system (pacman -Su) I get very strange behaviour from aMule.
I see nothing on all of the panels that list stuff (for example search results or even shared files) -- this is despite that aMule counts these items - it simply doesn't show them. (for example it says Shared Files(2))
I guess something messed up with the wxWidget that does the sortable list stuff component or something?
RotemWithout knowing the code, can't say for sure, but it sounds like the buffer was never cleared on your server.
Typically, a client does not send data over the network until a buffer is full - then it sends the entire buffer. The server typically won't read (input.isReady() should return false) until it's receieve buffer is full.
However, if you kill the server/client processes and restart them - it normally would clear out the buffers - as java does automatic GC pickup.
Try adding a gc() to the termination of the server, and also try making the clients flush() their output streams before closing the connection.
Let us know what happens.
Message was edited by:
watertownjordan -
Very strange itunes behaviour: please help!
OK. So I downloaded uniblue's 'speed up my PC' software which is highly unadvisable because quite apart from it having little noticeable effect, it appears to have really screwed up my itunes, albeit more in an annoying way than a disastrous way.
On attempting to open itunes I am presented with a small box (Windows Xp SP3 by the way.) which says "Importing 'iTunes Music Library.xml'..." This takes about 3-4 minutes. Then the box changes to "Organizing Files" and appears to scan through my music very quickly - about 5-10 seconds.
Then I get an error message reading: "The file 'iTunes Library.itl' does not appear to be a valid iTunes library file. iTunes has attempted to recover your itunes library and renamed this file to 'iTunes Library (Damaged).itl'
So I press 'OK' (the only option) and itunes opens, and begins "creating artwork thumbnails" and "Determining gapless playback information" each of which takes aprox. 5 minutes.
While this is going on another error message appears: "The itunes library file cannot be saved. An unknown error occurred (-1450)." Again 'OK' is the only option. This message sometimes appears multiple times.
At this point I closed down itunes, uninstalled it, defragged my hard drive, deleted the itunes file and replaced it with a backup I keep on my external hard drive, then reinstalled it.
Hallelujah! It worked fine again, opening without any problems, with all my playlist and playcount data safe. I thought I had solved my problem. However, after the third reboot itunes reverted to its old behaviour (starting from paragraph two) again. I have now been through this entire cycle about three times and am getting very fed up.
If anyone could explain to me why this is happening and how to fix it - I wouldn't be able to thankyou enough.Praise be to Lord above! I have fixed it! And because I'm a nice guy and wouldn't want anyone else to go through the same frustration - I'm going to tell you how...
It was a problem with the registry that was causing the issue and funny old thing - uniblue's 'Registry Booster' solved the issue. It's ironic that software from the same company was used to solve the problem I know...I had almost decided to uninstall all uniblue products, but decided to run one last scan with registry booster to see what happened....So just to sum up, this is how to solve the above issue:
1. Re-create/rebuild your library as detailed in this article: http://support.apple.com/kb/HT1451 or replace itunes folder with backup. Delete any corrupted/damaged files.
This alone should solve many issues but if you keep getting repeated corruption problems like I did then the problem seems to be within the REGISTRY.
2. To solve the registry error - I ran uniblue's 'Registry Booster' programme. I have no idea how to fix the registry manually. Sorry.
Message was edited by: andy525 -
Very strange cookie behaviour!
I have the following (standard) portalserver and gateway setup:
CLIENT -- IPLANET GW (gateway.domain.com) -- SAPPORTAL (sapportal.domain.com) / IPLANET PS (portalserver.domain.com)
When I load the url https://gateway.domain.com/http://sapportal.domain.com:1081/scripts/wgate/webgui/! the browser displays a basic html form.
Normal behaviour of this url - without - using the gateway is that two cookies are set:
Name: ~session
Domain: domain.com
Path: /scripts/wgate/webgui16d7229a/
Data: DEV:sapportal:0000.0186.cc6fc07f
Name: ~http_content_charset
Domain: sapportal.domain.com
Path: /scripts/wgate/webgui16d7229a/
Data: iso-8859-1
Through the gateway, cookie behaviour varies depending on chosen settings, but any which way.... fails to submit the form successfully (I get an error returned by the sapportal stating "No session available.. etc.").
The first cookie seems correct (exactly the same). These are my test results for the second cookie, with various settings:
SCENARIO A
HTTPD Proxy: OFF
Non Portal Cookie Management: ON
Result: When loading the form NO cookie is set from sapportal.domain.com, AFTER submit form IT DOES set a cookie, with the following data:
Name: %2Fscripts%2Fwgate%2Fwebgui47e0467c%2Fsapportal.domain.com_~http_content_charset
Domain: domain.com
Path: /
Data: iso-8859-1|sapportal.domain.com|/scripts/wgate/webgui47e0467c/|iplanet
SCENARIO B
HTTPD Proxy: OFF
Non Portal Cookie Management: OFF
Result: When loading the form IT DOES set a cookie by sapportal.domain.com, AFTER submit form NO cookie is set. When loading the form the following data is set:
Name: ~http_content_charset
Domain: domain.com
Path: /scripts/wgate/webgui47e04937/
Data: iso-8859-1
SCENARIO C
HTTPD Proxy: ON
Non Portal Cookie Management: OFF
Result: When loading the form IT DOES set a cookie by sapportal.domain.com, AFTER submit form NO cookie is set. When loading the form the following data data is set:
Name: ~http_content_charset
Domain: gateway.domain.com
Path: /scripts/wgate/webgui47e04937/
Data: iso-8859-1
SCENARIO D
HTTPD Proxy: ON
Non Portal Cookie Management: ON
Result: When loading the form NO cookie is set by sapportal.domain.com, AFTER submit form IT DOES set a cookie, with the following data:
Name: %2Fscripts%2Fwgate%2Fwebgui47e0467c%2Fportalserver.domain.com_~http_content_charset
Domain: domain.com
Path: /
Data: iso-8859-1|portalserver.domain.com|/scripts/wgate/webgui47e0467c/|iplanet
Ok, so this is a lot of information, but please bare with me. What I noticed is this:
1. Depending on chosesn settings, sometimes cookies are set upon loading of form (as they should be), sometimes afer submission of the form. Why??
2. As I need to forward cookies in the chain from sapportal to client (through gateway) it's desired to turn ON non portal server cookie management. But why does this setting result in the cookie begin set AFTER submission of the form as turning the setting OFF doesn't?
3. Turning the proxy on/off does not affect the behaviour mentioned in items 1 and 2, however: When proxy is turned OFF (scenario A), the host/domain is set correctly to sapportal.domain.com, as when the proxy is turned ON (scenario D) it states portalserver.domain.com. This is the name of my iplanet portalsever, which I got nothing to do with???? Why??
Note. Of all scenario's the cookie that looks like he's got what it takes, is scenario A. But this cookie is set AFTER submitting the form, when the original situation (no gateway) does it upon loading of the form.... :S
Does any of this makes sense? Am I missing something here?I haven't had any reply, but just to put things in a starker light:
Where's the bug?
** In the javax.servlet.http.Cookie.getValue() method? or*
** In Firefox?* -
Very strange JTextPane behaviour
Hi everybody,
it would be great if someone could help me. The problem I'm facing is the following: I have a small dialog with three tabs. On the third tab there is a JTextPane to receive messages from my program. These messages are posted there by means of an abstract class that only has static methods, sort of a System.out.println() thing, only for my GUI. On the first tab there are some buttons. I have used these to post some messages into the JTextPane.
Now this is what happens:
If I click a button (post a message), and then switch to the third tab everything works fine. If I do the same again, it still works, e.g.:
This is text..
This is text..
This is text..
But if I first click the button a few times and THEN switch to the third tab, then I get the following result:
This is text..This is text..This is text..
This is text..This is text..
This is text..
I have no idea at all. I have looked everywhere, but I can't find anything. Please help me.
Greetings, MitchThe StyledDocument cl*** does not support an append method, which is quite sad. Here it is ... declare it in your JTextPane subclass
public void appendDocument(String s,AttributeSet attr) {
StyledDocument d = (StyledDocument) getDocument();
try { d.insertString(d.getLength(),s,attr); }
catch (BadLocationException e) {} // will never happen
}Hope, this helps
greetings Marsian -
Very Strange iTunes Behaviour???!!!
Hi All
Wonder if anyone can shed some light on this. I have been a happy itunes/ipod user for many years until this week! iTunes, all of a sudden, now only imports my cd's at about x5 instead of the usual x16, while it imports the mouse pointer moves in a jerky fashion as though all the memory is being used and it also messes with my broadband net connection rendering it useless and I have to reboot my pc to get the net to work again!
I did a fresh install of itunes (latest version) no difference. I checked the cpu usage while the import is in progress - its about 50% used both cpu and RAM. My CD drive is set to DMA and my itunes library that I'm importing to is frequently emptied out to an external HD so the file on the internal HD is small.
The only thing I can think of that I have done recently is set up an itunes store account, but surely that will not cause all these problems?
Any clues would be appcreciated
thanks
LeeIs it a firmware issue then? I always find things like this puzzling as it was working well last week but this week it isn't????
yeah, although i'm wondering a wee bit more about video drivers at the moment, based on the mouse/display behavior.
i figure our PCs are pretty much gently altering on a daily basis ... what with security software updates, windows updates, and just general wear and tear. every now and then they slowly move past some threshhold, and the effects are reasonably dramatic, even though the change in the conditions has been slight and incremental.
but enough philosophical musings ... let's try and get her working a bit better.
perhaps before we go the drivers route, let's try some general maintenance and spring cleaning.
download fresh definitions and do some vigorous virus and spyware scans.
now do a disk cleanup, clear your temporary internet files (that's in your Internet options), and run your favorite disk checking utility. if you don't have one, try running a chkdsk:
How to perform disk error checking in Windows XP
now do a disk defrag and reboot.
try doing a reimport of one of the CDs you were getting the grumpy behavior with. does it behave a bit better, or is the import still sluggish, and the mouse still a bit wonky? -
Very strange display behaviour
We have a Java application which is working fine in at least
3 dozen windows machines (98/2000/XP). Today we installed it on
a particuklar machine (W2K) and all we could see was a blank frame.
When we dragged the frame, the components got painted. Every time
a dialog opens, the same happens. Nothing is painted until the frame
is dragged. There is nothing particular about the computer. It is your
regular pentium IV running W2K.
Anybody experienced this before??Hi,
we seem to have a similar problem with repainting or refreshing a swing app. It runs fine on some machines and takes around 2 minutes(!) on other machines to refresh the main window after loading and working on some files. It doesn't matter on these machines wether you click or drag or resize the window, it just takes time to refresh. I have tried to add a bunch of invalidate() validate repaint, disabled the acceleration of the video cards, nothing... when I look at the task manager, the cpu does nothing during this 2 minutes.
I am pulling my hair out and hope that the customer I have to see tomorrow has a 'compatible' PC. I am more than open to any suggestions...
David -
Hi,
I'm currently facing a very strange Oracle behaviour. First of all, here are the settings:
* 2 CPUs @ 1,6 GHz
* Raid-0 with 2 x 160 GB
* 3 GB RAM
* Windows 2000 Advanced Server
* Oracle Standard 9.2.0.7 using standard settings for the instance
On the machine there is only one db (containing one instance) running, nothing else (beside the OS). The instance has 1GB shared memory assigned and contains about 5 GB of data distributed in approx. 750 tables.
I'm trying to delete all non-master data from the instance via simple "delete <table> where id in (select id from some_table)" statements in a script. This works perfectly (approx. 2-3 million deleted records per hour), processor load is about 50%, the Windows system monitor shows few hundred kilobytes of data read/written per minute.
But this changes after maybe one hour running time. CPU load sinks to 4-5% and data transfer rate rises to approx. 2GB(!!) per minute. I tried to abort the deleting process and rebuild all indexes as well statistics of the schema affected, but without any improvements. The only thing working at the moment is commiting the transaction and shutting down/restarting the instance. Afterwards everything is working fine (without index/statistic rebuilding!), but only for the time period mentioned before.
Does anyone know what could be the source of this behaviour? Anyone got any hints what to change for a better performance? I already thought of bulk inserting the whole schema in a cloned schema without constraints, but 700 tables contain a lot of constraints and triggers, so a consistent insert would be a pain in the tush...
Thanks in advance!No, the disks are internal as is the raid controller. And strangely enough, not writing causes a high data rate, but reading! I assume that if the caches are too small the DB starts reading the indexes time and again, but 2 GB of index reading per minute??? No way, I say. Few hundred kilobytes or even a few megabytes makes sense in my opinion, but not the amount mentioned...
Truncating the tables would be a solution, but have you already tried to empty a 750 table schema with constraints and triggers implementing data inheritance? I have, and it didn't work, afterwards data consistency was not given any more...
I have already tried to delete the data in batches, each followed by a commit operation. But this brought the same result after a while, which was reading GBs of data per minute... -
Populate List from Database (Very Strange Behaviour)
Dear Fellows,
I have developed a from which has two lists One for Major (say) and Other for Minor (say), thesr minors are based on the value of Major.
Now I have developed this system on Windows XP Professional, Developer/2000 6i and Oracle 8i (release 8.1.7).
Major list is populated from database and it shows all major values now using 'when_list_change' trigger the minor list is populated from the database based on the value of major list. Interestingly enough it is working fine without any problem.
Now I have deployed the software to Windows 2000 Professional/Server (tried on both), Developer/2000 6i and Oracle 8.0.5, but strangly the lists are not working now. First list (major) is still working but the other dependent lists are not working.
Another strange thing is that it populate the second list for one particular value (only at times).
The logic is that I have used a program unit to which i am passing 'list element' and 'query' and call it for each list in the when-list-change trigge.
Now its a very strange behaviour, I don't know what to do?
Your cooperation will be highly appreciated.
regards.rolrollerx wrote:
Hi,
I have Nokia N8 (a great phone, btw) with Symbian Anna. I wanted to download the maps. But the PC Ovi Suite is just busy forever, without downloading anything (I used Performance Monitor to find out it was doing nothing for hours).
As I have unlimited data plan from my phone, I decided to try updating directly from the phone instead. It successfully downloaded the list of maps, but when I selected one of them
"No Wi-Fi network available. Please configure a WiFi access point in the phone Internet destination settings."
Why should I do that? I have a working connection on that phone (as evidenced by the successful download of the list of maps). So now, I am stuck. How can I download the maps?
Well, the suggestion is there. Use a router.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009 -
Very strange behaviour master-detail-detail please help
Very strange behaviour master-detail-detail please help
Hello,
I have a parent-child-grandchild report which show's some really strange behaviour.
The data template has 3 queries Q1, Q2 and Q3.
Q2 is bound to Q1 using a bind variable
Q3 is bound to Q2 using another bind variable
For a certain record in Q1 the output should be
2 records in Q2
and 1 record in Q3 for each record in Q2
Q1 record
Q2 record A
Q3 record AA
Q2 record B
Q3 record BC
The results conforms to the expected output.
For another record in Q1 the output should be
2 records in Q2
and 2 records in Q3 for each record in Q2
Q1 record
Q2 record A
Q3 record AA
Q3 record AB
Q2 record B
Q3 record BC
Q3 record BD
In stead of the expected output, the result shows
Q1 record
Q2 record A
Q3 record AA
Q3 record AB
Q2 record B
Q3 record AB
For another record in Q1 the output should be
5 records in Q2
and 2 records in Q3 for each record in Q2
Q1 record
Q2 record A
Q3 record AA
Q3 record AB
Q2 record B
Q3 record BC
Q3 record BD
Q2 record C
Q3 record CE
Q3 record CF
Q2 record D
Q3 record DG
Q3 record DH
Q2 record E
Q3 record EI
Q3 record EJ
In stead of the expected output, the result shows
Q1 record
Q2 record A
Q3 record AA
Q3 record AB
Q2 record B
Q3 record BC
Q3 record BD
Q2 record C
Q3 record CE
Q3 record CF
Q2 record D
Q3 record DG
Q3 record DH
Q2 record E
Q3 record DH
So for the last record of Q2 I don't get the appropriate records from Q3 when there are multiple records to be shown, but only the last record which belongs to the previous Q2
What is going on?
Please help me out...
Kind regards,
Jan-MarcelHi Tim,
Thanks for your reply. Below you will find the datatemplate on the scott/tiger schema.
Please help me out.
Kind regards,
Jan-Marcel
<dataTemplate name="scott" description="Template scott" dataSourceRef="otcy001" version="1.1">
<parameters>
<parameter name="p_deptno" dataType="number"/>
</parameters>
<dataQuery>
<sqlStatement name="Q1">
<![CDATA[
select empno mgr_empno
, ename mgr_name
, job mgr_job
, hiredate mgr_hiredate
, sal mgr_sal
, comm mgr_comm
from emp
where deptno = nvl(:p_deptno, deptno)
and mgr is null
]]>
</sqlStatement>
<sqlStatement name="Q2">
<![CDATA[
select empno mgr2_empno
, ename mgr2_name
, job mgr2_job
, hiredate mgr2_hiredate
, sal mgr2_sal
, comm mgr2_comm
, mgr mgr2_mgr
from emp
where mgr = :mgr_empno
]]>
</sqlStatement>
<sqlStatement name="Q3">
<![CDATA[
select empno emp_no
, ename emp_name
, job emp_job
, hiredate emp_hiredate
, sal emp_sal
, comm emp_comm
, mgr emp_mgr
from emp
where mgr = :mgr2_empno
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_mgr1" source="Q1">
<element name="q1_mgr_empno" value="mgr_empno"/>
<element name="q1_mgr_name" value="mgr_name"/>
<element name="q1_mgr_job" value="mgr_job"/>
<element name="q1_mgr_hiredate" value="mgr_hiredate"/>
<element name="q1_mgr_sal" value="mgr_sal"/>
<element name="q1_mgr_comm" value="mgr_comm"/>
<group name="G_mgr2" source="Q2">
<element name="q2_mgr_empno" value="mgr2_empno"/>
<element name="q2_mgr_name" value="mgr2_name"/>
<element name="q2_mgr_job" value="mgr2_job"/>
<element name="q2_mgr_hiredate" value="mgr2_hiredate"/>
<element name="q2_mgr_sal" value="mgr2_sal"/>
<element name="q2_mgr_comm" value="mgr2_comm"/>
<element name="q2_mgr2_mgr" value="mgr2_mgr"/>
<group name="G_emp" source="Q3">
<element name="q3_emp_empno" value="emp_empno"/>
<element name="q3_emp_name" value="emp_name"/>
<element name="q3_emp_job" value="emp_job"/>
<element name="q3_emp_hiredate" value="emp_hiredate"/>
<element name="q3_emp_sal" value="emp_sal"/>
<element name="q3_emp_comm" value="emp_comm"/>
<element name="q3_emp_mgr" value="emp_mgr"/>
</group>
</group>
</group>
</dataStructure>
</dataTemplate> -
FOR i IN (statement) LOOP - very strange behaviour
Hello, I'm experiencing very strange behaviour in my 9i Development Environment:
If I run this select from SQL Plus a I get six month with number of days:
select to_char(add_months(trunc(sysdate,'month'),rownum-1),'Month-YYYY') tmp_date, add_months(trunc(sysdate,'month'),rownum)-add_months(trunc(sysdate,'month'),rownum-1) colspan from dual a connect by level <=6
But if I try to cycle through it in PL/SQL I only get the first row.
FOR i in (
select to_char(add_months(trunc(sysdate,'month'),rownum-1),'Month-YYYY') tmp_date, add_months(trunc(sysdate,'month'),rownum)-add_months(trunc(sysdate,'month'),rownum-1) colspan
from dual a
connect by level <=6 )
loop
-- print something out
end loop;
Any ideas why does this happen this way? If I use a query that does not contain CONNECT BY it works ok.Hi
Just change as given below:
FOR i in (
select * from (select to_char(add_months(trunc(sysdate,'month'),rownum-1),'Month-YYYY') tmp_date, add_months(trunc(sysdate,'month'),rownum)-add_months(trunc(sysdate,'month'),rownum-1) colspan
from dual a
connect by level <=6 ))
loop
-- print something out
end loop;
Regards
RK -
Very strange behaviour of RGBImageFilter class
Hi!
I found very strange behaviour of RGBImageFilter class and problem is
that I need to solve that problem :/ So, situation is next:
I decided to use filtering process for collecting information about
image. So, I extended my own class from RGBImageFilter and overwrite
filterRGB( ... ) method ( everything is absolutely the same as in
documentation ) and also added my own code for 'no matter what'.
This code changes some class variable and my idea was to read those
variables after filtering process end, but... Suddenly I realized that
those variables, many times changed while filtering were performed
( I checked it ) after filtering gave the same value as in constructor!
The only one clue and idea about what happened is that class instance
were cloned and then executed, but thats not a functionality I was
searching. :/ I made some example of that 'effect'.
Image file name goes in command line.
Please pay attention on -3 value on exit: Filtering works, count growing
( just uncomment setPixels() method to see it ) but, but...
import java.awt.*;
import java.awt.image.*;
import javax.swing.*;
class ToForum
public static void main( String[] args )
try
JFrame frame = new JFrame( "now i beleave in x-files!" );
frame.setDefaultCloseOperation( frame.DISPOSE_ON_CLOSE );
Toolkit kit = Toolkit.getDefaultToolkit();
Image origin = kit.getImage( args[0] );
RedBlueSwapFilter filter = new RedBlueSwapFilter();
Image filtered = frame.createImage( new FilteredImageSource( origin.getSource(), filter ) );
MediaTracker tracker = new MediaTracker( frame );
tracker.addImage( filtered, 1 );
tracker.waitForAll();
System.out.println( "AND WE GOT: "+filter.getCount()+" !!!" );
Container content = frame.getContentPane();
content.setLayout( new FlowLayout() );
JLabel label = new JLabel( new ImageIcon( filtered ) );
content.add( label );
frame.pack();
frame.setVisible( true );
catch( Exception ex )
System.out.println( "Exception in main():\n"+ex );
class RedBlueSwapFilter extends RGBImageFilter
private int count=-5;
public RedBlueSwapFilter()
count = -3;
canFilterIndexColorModel = true;
// uncommenting this function will show that filterRGB method IS calling !!!
// so, why then AFTER filtering count is still ( or again ??? ) equals to 0 ?
public void setPixels( int x, int y, int w, int h, ColorModel model, int pixels[], int off, int scansize )
System.out.println( "on entering in setPixels count="+count );
super.setPixels( x, y, w, h, model, pixels, off, scansize );
System.out.println( "on exiting from setPixels count="+count );
public int filterRGB( int x, int y, int rgb )
count++;
return ( (rgb&0xff00ff00) | ((rgb&0xff0000) >> 16) | ((rgb&0xff) << 16) );
public int getCount()
return count;Cliff, Hi. I'm curious because this can't work. I have no problem synching with the exchange - as long as i accept the message that the certificate of the exchange (which is not the certificate of the exchange but the certificate of dig @reighthandsideofmailadress) is not valid (expired, wrong common name etc).
-
Very strange boot/device behaviour- please help!
hello!
i was quite happy with my macbook pro, when it one day did not boot anymore. i just saw the black screen and no startup sound was heard. i tried several times to restart, but no result. i gave up for some hours and when i came back it worked again.
i thought it might have been the humidity as sunnier days came their way and my macbook worked without any problem.
however, one month later i´m confronted again with this boot issue. so after the mbp has been turned off, i have to wait 30 minutes in order to be able to restart. if not, it gets stuck with the black screen.
i went trough the troubleshooting tips (SMC reset, PRam reset) and even made an archive and install. unfortunately without any result.
to make things worse my audio stopped to work also. first it did not even show up the devices -" no input/output devices found", after the archive and install the devices were found, but still no sound (except the startupsound)...
...i really do not have any clue what might be the problem, but as i am currently far from home and far from any apple support center, i would very much appreciate every hint or solution.
tnx
dawandeh
macbook pro 2,33 GHz Mac OS X (10.4.9)hello again!
it's very strange indeed. my macbook was working without any problems again for 2 days. then i was playing music on itunes when the screen went black(please restart), i could hear some scratchy noises before. again i could not restart. after 30 attempts the computer booted and everything worked except the audio, it said "no output devices found". i noticed that after some hours of rest my computer returns to full funcionality. as i said, i have no means to bring my computer to an apple store. maybe someone can give me an indication of what might be wrong. here is the panic.log:
panic(cpu 0 caller 0x00136744): stack_alloc: kernelmemoryallocate
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x2cb63eb8 : 0x128d08 (0x3c9afc 0x2cb63edc 0x131de5 0x0)
0x2cb63ef8 : 0x136744 (0x3ca48c 0x2cb63f2c 0x4000 0x7fff)
0x2cb63f38 : 0x13b9a8 (0x491d8b0 0x1 0x4af85c 0x4b8070)
0x2cb63f68 : 0x13b9fb (0x13d8d5 0x0 0x5e 0x2cb63f8c)
0x2cb63f98 : 0x13d0b1 (0x13d8d5 0x0 0x5e 0x2cb63fbc)
0x2cb63fc8 : 0x19a77c (0x0 0x0 0x19d0b5 0x491e2dc) Backtrace terminated-invalid frame pointer 0x0
Kernel version:
Darwin Kernel Version 8.8.2: Thu Sep 28 20:43:26 PDT 2006; root:xnu-792.14.14.obj~1/RELEASE_I386
Model: MacBookPro2,2, BootROM MBP22.00A5.B01, 2 processors, Intel Core 2 Duo, 2.33 GHz, 2 GB
Graphics: ATI Radeon X1600, ATY,RadeonX1600, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
AirPort: AirPort Extreme, 1.0.27p3
Bluetooth: Version 1.7.11f14, 2 service, 0 devices, 1 incoming serial ports
Serial ATA Device: Hitachi HTS541616J9SA00, 149.05 GB
Parallel ATA Device: MATSHITADVD-R UJ-857D
USB Device: Built-in iSight, Micron, Up to 480 Mb/sec, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA
USB Device: Bluetooth HCI, Up to 12 Mb/sec, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., Up to 12 Mb/sec, 500 mA
tnx
dawandeh -
MacBook Pro - Battery behaving very strangely
I have noticed there are already many threads on this, couldn't decide which one to post in so am starting a new one.
I have a MBP 2.33 C2D 17" from late 2006. Last year I experienced the 'expanding battery' problem, my battery totally warped out of shape and was not working properly. After a fair bit of trouble with Apple France (who basically said, too bad, buy a new one), I eventually was able to go above their heads and get Apple to send me a free replacement. This seemed fair seeing as I had bought my MBP within the timeframe of an official battery recall published on the Apple site. The new battery worked absolutely fine, and is now still less than a year old.
Recently though, it has started to behave very strangely. I hadn't made any connection that it could be to do with having upgraded to Snow Leopard, but in retrospect, after reading many of the threads here, it does seem likely that this is the case.. I recently did a big upgrade from Tiger to SL on this very machine, and it has been since then that I've had very erratic battery behaviour.
My symptoms are similar to many I've read here: The remaining battery time (when not connected to AC) will jump from say 3 hours down to 15 mins very suddenly. Then sometimes it will jump back up again. Sometimes my battery health condition will say 'replace now', other times 'replace soon' or other times 'normal'. Also, sometimes the machine will just go to sleep with no warning, even when it had estimated more than an hour of battery time left.. upon reconnection to AC, suddenly it says 0%.
I have always been careful to power cycle the battery properly, to let it run down regularly. Also since noticing this problem, the first thing I tried to do was recalibrate.. But I've tried twice now with no success. I let the machine run right down till it went to sleep, then left it on overnight, waiting for the power LED to stop flashing on the front of the machine.. But it wouldn't stop flashing even after being left off overnight. I have yet to try an SMC reset, will do that next.
I realize my battery is not brand new, nor is my computer. However, this was a replacement battery I received less than a year ago. I'll put the battery stats below, but I'm not sure I believe them because I've been checking what is says a lot recently and sometimes it even shows a full charge capacity of a negative number! Something strange is going on here. I obviously don't expect full performance from a battery nearly a year old, but what it's doing here seems to be more than just a case of a battery getting old, especially having seen that many other users are having a similar set of symptoms after going to Snow Leopard.
Model Information:
Manufacturer: SMP
Device name: ASMB014
Pack Lot Code: 0002
PCB Lot Code: 0000
Firmware Version: 0110
Hardware Revision: 0500
Cell Revision: 0102
Charge Information:
Charge remaining (mAh): 2453
Fully charged: Yes
Charging: No
Full charge capacity (mAh): 2453
Health Information:
Cycle count: 396
Condition: Replace Now
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 12597
Any suggestions appreciated..
Cheers.I just got off a call with Apple support. The tech agreed that my symptoms were not normal, even for a battery with a cycle count over 300 like mine.. especially with the fact that the system profiler is showing bizarre info that makes no sense such as a full charge of a negative number. He said that basically the only thing I can try is to do an archive and reinstall of Snow Leopard, since it seems that the operating system is possibly corrupted. I don't think it's anything to do with the physics of the battery, it is more likely that the OS is not interacting properly with the battery, thus giving false and conflicting readings and information.. He seemed quite certain that it can't be a problem with Snow Leopard itself, seeing as all of the laptops in the Apple Support office were on SL and did not have this problem. So in his opinion, a corrupted OS was the most likely explanation. In any case, he said that batteries are only covered by a 90 day guarantee, so if it turns out that after a reinstall, my problem doesn't go away, then I'll have no choice but to buy a new battery because they won't cover it... This doesn't seem very fair to me because if it turns out that the OS has nothing to do with it, then it must be a faulty battery, because this kind of behaviour is certainly not what I'd call acceptable for a battery of less than a year old.
Anyway, I'll perhaps try the archive and install process on the weekend and see what happens. -
VERY strange lag on a Dell Optiplex 760
I thought it would be a good idea to keep a 16GB flash drive on my keychain that booted Arch so I could work on HW for college in a consistent OS! Everything is working great so far, but I ran into a very strange problem with a Dell Optiplex 760. During the normal Arch init process, everything loads great, except for when it gets to the udev stage where everything hangs. But here's the strange part of this scenario: the problems go away when I start typing random keys or move the mouse! If I don't do this, the system hangs completely from what I can tell. This happens at the console and with X.
The service tag for this machine is FDCQQJ1, and the dell.com driver area brings up this list of hardware and (windows) drivers for it.
Here's the #lspci -vv of the system:
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
Subsystem: Dell Device 027f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 33
Region 0: Memory at fe800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at ec90 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 41c1
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:03.0 Communication controller: Intel Corporation 4 Series Chipset HECI Controller (rev 03)
Subsystem: Dell Device 027f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at feda6000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
00:03.2 IDE interface: Intel Corporation 4 Series Chipset PT IDER Controller (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at fe80 [size=8]
Region 1: I/O ports at fe90 [size=4]
Region 2: I/O ports at fea0 [size=8]
Region 3: I/O ports at feb0 [size=4]
Region 4: I/O ports at fef0 [size=16]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
00:03.3 Serial controller: Intel Corporation 4 Series Chipset Serial KT Controller (rev 03) (prog-if 02 [16550])
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at ec98 [size=8]
Region 1: Memory at fe6d8000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel driver in use: serial
00:19.0 Ethernet controller: Intel Corporation 82567LM-3 Gigabit Network Connection (rev 02)
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 32
Region 0: Memory at fe6e0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fe6d9000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at ecc0 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 41d1
Capabilities: [e0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at ff20 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff00 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #6 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at fc00 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device 027f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at fe6da000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device: Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller (rev 02)
Subsystem: Dell Device 027f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe6dc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000feda8000
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fe500000-fe5fffff
Prefetchable memory behind bridge: 000000007e000000-000000007e1fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #5, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4189
Capabilities: [90] Subsystem: Dell Device 027f
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000feda8000
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fe400000-fe4fffff
Prefetchable memory behind bridge: 000000007e200000-000000007e3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #4, PowerLimit 10.000W; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4191
Capabilities: [90] Subsystem: Dell Device 027f
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=02 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000feda8000
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at ff80 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at ff60 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device 027f
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at ff980000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Dell Device 027f
00:1f.0 ISA bridge: Intel Corporation 82801JD (ICH10D) LPC Interface Controller (rev 02)
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel modules: iTCO_wdt
00:1f.2 IDE interface: Intel Corporation 82801JD/DO (ICH10 Family) 4-port SATA IDE Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fec0 [size=16]
Region 5: I/O ports at eca0 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.3 SMBus: Intel Corporation 82801JD/DO (ICH10 Family) SMBus Controller (rev 02)
Subsystem: Dell Device 027f
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe6db000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at ece0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 IDE interface: Intel Corporation 82801JD/DO (ICH10 Family) 2-port SATA IDE Controller (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Dell Device 027f
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at fe40 [size=8]
Region 1: I/O ports at fe50 [size=4]
Region 2: I/O ports at fe60 [size=8]
Region 3: I/O ports at fe70 [size=4]
Region 4: I/O ports at fed0 [size=16]
Region 5: I/O ports at ecb0 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ata_piix
Kernel modules: ata_piix
I have googled around a bit, and I've read about others (surprisingly) having the same issue, but I've found no answers to my avail yet.Here are the packages installed on my system, with versions (output of pacman -Qs):
local/a2ps 4.14-1
a2ps is an Any to PostScript filter
local/a52dec 0.7.4-4
liba52 is a free library for decoding ATSC A/52 streams.
local/acl 2.2.48-1 (base)
Library for filesystem ACL support
local/alsa-lib 1.0.22-1
An alternative implementation of Linux sound support
local/alsa-utils 1.0.22-2
An alternative implementation of Linux sound support
local/aspell 0.60.6-4
A spell checker designed to eventually replace Ispell
local/ati-dri 7.7-1
Mesa DRI drivers for AMD/ATI Radeon
local/atk 1.28.0-1
A library providing a set of interfaces for accessibility
local/attr 2.4.44-1 (base)
Extended attribute support library for ACL support
local/autoconf 2.65-1 (base-devel)
A GNU tool for automatically configuring source code
local/automake 1.11.1-1 (base-devel)
A GNU tool for automatically creating Makefiles
local/avahi 0.6.25-3
A multicast/unicast DNS-SD framework
local/b43-firmware 4.150.10.5-1
Firmware for Broadcom B43 wireless networking chips
local/b43-fwcutter 012-1
firmware extractor for the bcm43xx kernel module
local/bash 4.1.002-2 (base)
The GNU Bourne Again shell
local/beanshell 2.0b4-1
Small, free, embeddable, source level Java interpreter with object based
scripting language features written in Java
local/bin86 0.16.17-4 (base-devel)
A complete 8086 assembler and loader
local/binutils 2.20-3 (base)
A set of programs to assemble and manipulate binary and object files
local/bison 2.4.1-1 (base-devel)
The GNU general-purpose parser generator
local/bzip2 1.0.5-5 (base)
A high-quality data compression program
local/ca-certificates 20090814-2
Common CA certificates
local/ca-certificates-java 20090629-2
Common CA certificates (JKS keystore)
local/cabextract 1.2-2
A program to extract Microsoft cabinet (.CAB) files.
local/cairo 1.8.10-1
Cairo vector graphics library
local/cairomm 1.8.4-1
C++ bindings to Cairo vector graphics library
local/cdparanoia 10.2-2
Compact Disc Digital Audio extraction tool
local/cloog-ppl 0.15.7-1
Library that generates loops for scanning polyhedra
local/compositeproto 0.4.1-1
X11 Composite extension wire protocol
local/consolekit 0.4.1-2
A framework for defining and tracking users, login sessions, and seats
local/coreutils 8.4-1 (base)
The basic file, shell and text manipulation utilities of the GNU operating
system
local/cpio 2.10-1 (base)
A tool to copy files into or out of a cpio or tar archive
local/cracklib 2.8.13-2 (base)
Password Checking Library
local/cryptsetup 1.1.0-2 (base)
Userspace setup tool for transparent encryption of block devices using the
Linux 2.6 cryptoapi
local/curl 7.20.0-1
An URL retrival utility and library
local/cyrus-sasl-plugins 2.1.23-1
Cyrus Simple Authentication Service Layer (SASL) library
local/damageproto 1.2.0-1
X11 Damage extension wire protocol
local/dash 0.5.5.1-2 (base)
A POSIX compliant shell that aims to be as small as possible
local/db 4.8.26-1 (base)
The Berkeley DB embedded database system
local/dbus 1.2.20-1
Freedesktop.org message bus system
local/dbus-core 1.2.20-1
Freedesktop.org message bus system
local/dbus-glib 0.82-2
GLib bindings for DBUS
local/dcron 4.4-2 (base)
dillon's lightweight cron daemon
local/desktop-file-utils 0.15-1
Command line utilities for working with desktop entries
local/device-mapper 2.02.60-3 (base)
Device mapper userspace library and tools
local/dhcpcd 5.2.1-1 (base)
RFC2131 compliant DHCP client daemon
local/dialog 1.1_20100119-1 (base)
A tool to display dialog boxes from shell scripts
local/diffutils 2.9-1 (base)
Utility programs used for creating patch files
local/dmidecode 2.10-1
Desktop Management Interface table related utilities
local/dmxproto 2.3-1
X11 Distributed Multihead X extension wire protocol
local/dosfstools 3.0.9-1
DOS filesystem utilities
local/dri2proto 2.1-2
X11 DRI protocol
local/e2fsprogs 1.41.10-1 (base)
Ext2/3/4 filesystem utilities
local/ed 1.4-1 (base-devel)
A POSIX-compliant line editor
local/eggdbus 0.6-1
Experimental D-Bus bindings for GObject
local/eject 2.1.5-4
Eject is a program for ejecting removable media under software control
local/enca 1.13-1
Charset analyser and converter
local/enchant 1.5.0-3
A wrapper library for generic spell checking
local/eventlog 0.2.9-1
A new API to format and send structured log messages
local/exo 0.3.106-1 (xfce4)
Extensions to Xfce by os-cillation
local/expat 2.0.1-5
An XML Parser library written in C
local/faac 1.28-2
FAAC is an AAC audio encoder
local/faad2 2.7-1
ISO AAC audio decoder
local/fakeroot 1.14.4-2 (base-devel)
Gives a fake root environment, useful for building packages as a
non-privileged user
local/farsight2 0.0.17-1
Audio/Video conference software for Instant Messengers
local/ffmpeg 22511-1
Complete and free Internet live audio and video broadcasting solution for
Linux/Unix
local/file 5.04-2 (base)
File type identification utility
local/filesystem 2010.02-4 (base)
Base filesystem
local/findutils 4.4.2-1 (base)
GNU utilities to locate files
local/fixesproto 4.1.1-1
X11 Fixes extension wire protocol
local/flac 1.2.1-2
Free Lossless Audio Codec
local/flashplugin 10.0.45.2-1
Adobe Flash Player
local/flex 2.5.35-3 (base-devel)
A tool for generating text-scanning programs
local/fluidsynth 1.1.1-2
A real-time software synthesizer based on the SoundFont 2 specifications
local/fontcacheproto 0.1.3-1
X11 font cache extension wire protocol
local/fontconfig 2.8.0-1
A library for configuring and customizing font access
local/fontsproto 2.1.0-1
X11 font extension wire protocol
local/freeglut 2.6.0-1
Provides functionality for small OpenGL programs
local/freetype2 2.3.12-1
TrueType font rendering library
local/fribidi 0.19.2-1
A Free Implementation of the Unicode Bidirectional Algorithm
local/frozen-bubble 2.2.0-2
A game in which you throw colorful bubbles and build groups to destroy the
bubbles
local/fuse 2.8.3-1
A library that makes it possible to implement a filesystem in a userspace
program.
local/gamin 0.1.10-1
Gamin is a file and directory monitoring system defined to be a subset of
the FAM (File Alteration Monitor) system.
local/gawk 3.1.7-1 (base)
Gnu version of awk
local/gcc 4.4.3-1 (base-devel)
The GNU Compiler Collection
local/gcc-libs 4.4.3-1 (base)
Runtime libraries shipped by GCC for C and C++ languages
local/gconf 2.28.0-1
A configuration database system
local/gdbm 1.8.3-6 (base)
GNU database library
local/gdk-pixbuf 0.22.0-7
Image loading and manipulation library
local/gen-init-cpio 2.6.32-1 (base)
Program to compress initramfs images
local/gettext 0.17-3 (base)
GNU internationalization library
local/ghostscript 8.71-2
An interpreter for the PostScript language
local/giflib 4.1.6-3
A library for reading and writing gif images
local/git 1.7.0.2-1
the fast distributed version control system
local/gksu 2.0.2-2
A graphical frontend for su
local/glib 1.2.10-8
Common C routines used by Gtk+ and other libs
local/glib2 2.22.4-1
Common C routines used by GTK+ 2.4 and other libs
local/glibc 2.11.1-1 (base)
GNU C Library
local/glibmm 2.22.1-1
Glib-- (glibmm) is a C++ interface for glib
local/gmp 4.3.2-1
A free library for arbitrary precision arithmetic
local/gnome-icon-theme 2.28.0-1 (gnome)
Default icon theme for GNOME2
local/gnome-keyring 2.28.2-1
GNOME Password Management daemon
local/gnutls 2.8.5-1
A library which provides a secure layer over a reliable transport layer
local/google-chrome-dev 5.0.342.3-1
Google Chrome Developer preview channel for Linux
local/gparted 0.5.2-1
A Partition Magic clone, frontend to GNU Parted
local/gpm 1.20.6-5
A mouse server for the console and xterm
local/gqview 2.0.4-3
An image browser and viewer
local/grep 2.5.4-3 (base)
A string search utility
local/groff 1.20.1-4
GNU troff text-formatting system
local/grub 0.97-16 (base)
A GNU multiboot boot loader
local/gsfonts 8.11-5
Ghostscript standard Type1 fonts
local/gstreamer0.10 0.10.28-1
GStreamer Multimedia Framework
local/gstreamer0.10-base 0.10.28-1
GStreamer Multimedia Framework Base plugin libraries
local/gstreamer0.10-base-plugins 0.10.28-1 (gstreamer0.10-plugins)
GStreamer Multimedia Framework Base Plugins (gst-plugins-base)
local/gstreamer0.10-python 0.10.18-1
Python bindings for GStreamer 0.10
local/gtk 1.2.10-10
The GTK+ toolkit
local/gtk-aurora-engine 1.5.1-1
gtk-engine: latest member of the clearlooks family
local/gtk-xfce-engine 2.6.0-1 (xfce4)
A port of Xfce engine to GTK+-2.0
local/gtk2 2.18.7-1
The GTK+ Toolkit (v2)
local/gtkmm 2.18.2-1
C++ bindings for gtk2
local/gtkspell 2.0.16-1
GtkSpell provides word-processor-style highlighting and replacement of
misspelled words in a GtkTextView widget
local/gzip 1.4-1 (base)
GNU compression utility
local/hal 0.5.14-2
Hardware Abstraction Layer
local/hal-info 0.20091130-1
Hardware Abstraction Layer information files
local/hdparm 9.27-2 (base)
A shell utility for manipulating Linux IDE drive/driver parameters
local/heimdal 1.3.1-3
Implementation of Kerberos V5 libraries
local/hicolor-icon-theme 0.11-1
Freedesktop.org Hicolor icon theme
local/hsqldb-java 1.8.1.1-1
HSQLDB Java libraries
local/htop 0.8.3-1
Interactive process viewer
local/hunspell 1.2.8-2
Spell checker and morphological analyzer library and program
local/hyphen 2.4-1
library for high quality hyphenation and justification
local/icon-naming-utils 0.8.90-1
Maps the new names of icons for Tango to the legacy names used by the GNOME
and KDE desktops.
local/icu 4.2.1-1
International Components for Unicode library
local/ilmbase 1.0.1-1
IlmThread is a thread abstraction library for use with OpenEXR
local/imagemagick 6.6.0.0-1
An image viewing/manipulation program
local/imlib2 1.4.2-6
Library that does image file loading and saving as well as rendering,
manipulation, arbitrary polygon support
local/initscripts 2010.01-1 (base)
System initialization/bootup scripts
local/inputproto 2.0-1
X11 Input extension wire protocol
local/intel-dri 7.7-1
Mesa DRI drivers for Intel
local/iproute2 2.6.31-1
IP Routing Utilities
local/iptables 1.4.7-1
A Linux kernel packet control tool
local/iputils 20100214-2 (base)
IP Configuration Utilities (and Ping)
local/iso-codes 3.14-1
Lists of the country, language, and currency names
local/jack 0.116.2-1
A low-latency audio server
local/jasper 1.900.1-5
A software-based implementation of the codec specified in the emerging
JPEG-2000 Part-1 standard
local/jfsutils 1.1.14-1 (base)
JFS filesystem utilities
local/json-glib 0.10.0-1
JSON library built on GLib
local/kbd 1.15.1-1 (base)
Keytable files and keyboard utilities
local/kbproto 1.0.4-1
X11 XKB extension wire protocol
local/kernel26 2.6.32.10-1 (base)
The Linux Kernel and modules
local/kernel26-firmware 2.6.32.10-1 (base)
The included firmware files of the Linux Kernel
local/kernel26-headers 2.6.32.10-1
Header files and scripts for building modules for kernel26
local/ladspa 1.13-2
Linux Audio Developer's Simple Plugin API (LADSPA)
local/lame 3.98.3-1
An MP3 encoder and graphical frame analyzer
local/lcms 1.18-3
Lightweight color management development library/engine
local/less 436-1 (base)
A terminal based program for viewing text files
local/libarchive 2.8.3-1
library that can create and read several streaming archive formats
local/libass 0.9.9-1
A portable library for SSA/ASS subtitles rendering
local/libcap 2.19-1
POSIX 1003.1e capabilities
local/libcddb 1.3.2-1
Library that implements the different protocols (CDDBP, HTTP, SMTP) to
access data on a CDDB server (e.g. http://freedb.org).
local/libcdio 0.82-1
GNU Compact Disc Input and Control Library
local/libcroco 0.6.2-1
GNOME CSS2 parsing and manipulation toolkit
local/libcups 1.4.2-3
The CUPS Printing System - client libraries and headers
local/libdaemon 0.14-1
A lightweight C library which eases the writing of UNIX daemons
local/libdatrie 0.2.3-1
Libdatrie is an implementation of double-array structure for representing
trie, as proposed by Junichi Aoe.
local/libdca 0.0.5-2
Free library for decoding DTS Coherent Acoustics streams
local/libdmx 1.1.0-1
X11 Distributed Multihead extension library
local/libdrm 2.4.18-2
Userspace interface to kernel DRM services
local/libdvbpsi 0.1.6-3
MPEG TS and DVB PSI tables library (needed by vlc for streaming)
local/libdvdnav 4.1.3-2
The library for xine-dvdnav plugin.
local/libdvdread 4.1.3-1
libdvdread provides a simple foundation for reading DVD video disks
local/libebml 0.7.8-2
Extensible Binary Meta Language library
local/libevent 1.4.13-1
An event notification library
local/libexif 0.6.19-1
A library to parse an EXIF file and read the data from those tags
local/libfetch 2.30-1 (base)
URL based download library
local/libfontenc 1.0.5-1
X11 font encoding library
local/libgcrypt 1.4.5-1 (base)
a general purpose crypto library based on the code used
local/libgksu 2.0.12-1
gksu authorization library
local/libgl 7.7-1
Mesa 3-D graphics library and DRI software rasterizer
local/libglade 2.6.4-1
Allows you to load glade interface files in a program at runtime
local/libgpg-error 1.7-2 (base)
Support library for libgcrypt
local/libgraphite 2.3.1-1
SILGraphite - a "smart font" rendering engine - the libs and headers
local/libgsf 1.14.16-1
The GNOME Structured File Library is a utility library for reading and
writing structured file formats
local/libgssglue 0.1-2
exports a gssapi interface which calls other random gssapi libraries
local/libgtop 2.28.0-1
A library that read information about processes and the running system
local/libice 1.0.6-1
X11 Inter-Client Exchange library
local/libid3tag 0.15.1b-4
library for id3 tagging
local/libidl2 0.8.13-1
A front-end for CORBA 2.2 IDL and Netscape's XPIDL
local/libidn 1.16-1
Implementation of the Stringprep, Punycode and IDNA specifications
local/libjpeg 8.0.1-1
Library of JPEG support functions
local/libjpeg6 6b-9
Library of JPEG support functions
local/libldap 2.4.21-1
Lightweight Directory Access Protocol (LDAP) client libraries
local/libmad 0.15.1b-4
A high-quality MPEG audio decoder
local/libmatroska 0.8.1-2
Matroska library
local/libmikmod 3.1.12-3
A portable sound library
local/libmng 1.0.10-3
A collection of routines used to create and manipulate MNG format graphics
files
local/libmodplug 0.8.7-1
A MOD playing library
local/libmp4v2 1.9.1-1
MPEG-4 library
local/libmpcdec 1.2.6-2
Musepack decoding library
local/libmpeg2 0.5.1-1
libmpeg2 is a library for decoding MPEG-1 and MPEG-2 video streams.
local/libmspack 0.0.20060920alpha-1
local/libmtp 1.0.2-1
library implementation of the Media Transfer Protocol
local/libmysqlclient 5.1.45-1
MySQL client libraries
local/libnice 0.0.11-1
An implementation of the IETF's draft ICE (for p2p UDP data streams)
local/libnl 1.1-1
Library for applications dealing with netlink sockets
local/libnotify 0.4.5-1.1
Desktop notification library
local/libogg 1.1.4-1
Ogg bitstream and framing library
local/liboil 0.3.17-1
Library of simple functions that are optimized for various CPUs.
local/libpcap 1.0.0-1 (base)
A system-independent interface for user-level packet capture
local/libpciaccess 0.10.9-1
X11 PCI access library
local/libpng 1.4.1-1
A collection of routines used to create PNG format graphics files
local/libpng12 1.2.40-1
A collection of routines used to create PNG format graphics files
local/libproxy 0.2.3-1
A library that provides automatic proxy configuration management
local/libpurple 2.6.6-1
IM library extracted from Pidgin
local/librpcsecgss 0.19-2
Library for RPCSECGSS support
local/librsvg 2.26.0-2
SAX-based renderer for SVG files into a GdkPixbuf
local/libsasl 2.1.23-2
Cyrus Simple Authentication Service Layer (SASL) library
local/libsexy 0.1.11-2
Doing naughty things to good widgets.
local/libshout 2.2.2-3
Library for accessing a shoutcast/icecast server
local/libsigc++2.0 2.2.4.2-1
Libsigc++ implements a full callback system for use in widget libraries - V2
local/libsm 1.1.1-1
X11 Session Management library
local/libsndfile 1.0.21-1
A C library for reading and writing files containing sampled sound
local/libtasn1 2.4-1
The ASN.1 library used in GNUTLS
local/libthai 0.1.14-1
Thai language support routines
local/libtheora 1.1.1-1
An open video codec developed by the Xiph.org
local/libtiff 3.9.2-2
Library for manipulation of TIFF images
local/libtirpc 0.2.1-1
Transport Independent RPC library (SunRPC replacement)
local/libtool 2.2.6b-2 (base-devel)
A generic library support script
local/libusb 0.1.12-4 (base)
Library to enable user space application programs to communicate with USB
devices
local/libv4l 0.6.4-1
Userspace library for Video 4 Linux (1 and 2)
local/libvdpau 0.4-1
Nvidia VDPAU library
local/libvisual 0.4.0-2
Abstraction library that comes between applications and audio visualisation
plugins
local/libvorbis 1.2.3-1
Vorbis codec library
local/libwmf 0.2.8.4-7
A library for reading vector images in Microsoft's native Windows Metafile
Format (WMF).
local/libwnck 2.28.0-1
Window Navigator Construction Kit
local/libwpd 0.8.14-1
library for importing WordPerfect (tm) documents
local/libx11 1.3.3-1
X11 client-side library
local/libx86 1.1-2
Provides an lrmi interface that works on x86, am64 and alpha
local/libxau 1.0.5-1
X11 authorisation library
local/libxaw 1.0.7-1
X11 Athena Widget library
local/libxcb 1.5-1
X11 client-side library
local/libxcomposite 0.4.1-1
X11 Composite extension library
local/libxcursor 1.1.10-1
X cursor management library
local/libxdamage 1.1.2-1
X11 damaged region extension library
local/libxdmcp 1.0.3-1
X11 Display Manager Control Protocol library
local/libxext 1.1.1-1
X11 miscellaneous extensions library
local/libxfce4menu 4.6.1-1 (xfce4)
a freedesktop.org compliant menu implementation for Xfce
local/libxfce4util 4.6.1-1 (xfce4)
Basic utility non-GUI functions for Xfce
local/libxfcegui4 4.6.3-1 (xfce4)
Various gtk widgets for Xfce
local/libxfixes 4.0.4-1
X11 miscellaneous 'fixes' extension library
local/libxfont 1.4.1-1
X11 font rasterisation library
local/libxfontcache 1.0.5-1
X11 font cache library
local/libxft 2.1.14-1
FreeType-based font drawing library for X
local/libxi 1.3-2
X11 Input extension library
local/libxinerama 1.1-1
X11 Xinerama extension library
local/libxkbfile 1.0.6-1
X11 keyboard file manipulation library
local/libxklavier 4.0-1
High-level API for X Keyboard Extension
local/libxml2 2.7.6-2
XML parsing library, version 2
local/libxmu 1.0.5-1
X11 miscellaneous micro-utility library
local/libxpm 3.5.8-1
X11 pixmap library
local/libxrandr 1.3.0-1
X11 RandR extension library
local/libxrender 0.9.5-1
X Rendering Extension client library
local/libxres 1.0.4-1
X11 Resource extension library
local/libxslt 1.1.26-1
XML stylesheet transformation library
local/libxss 1.2.0-1
X11 Screen Saver extension library
local/libxt 1.0.7-1
X11 toolkit intrinsics library
local/libxtst 1.1.0-1
X11 Testing -- Resource extension library
local/libxv 1.0.5-1
X11 Video extension library
local/libxvmc 1.0.5-1
X11 Video Motion Compensation extension library
local/libxxf86dga 1.1.1-1
X11 Direct Graphics Access extension library
local/libxxf86misc 1.0.2-1
X11 XFree86 miscellaneous extension library
local/libxxf86vm 1.1.0-1
X11 XFree86 video mode extension library
local/licenses 2.5-1 (base)
The standard licenses distribution package
local/links 2.2-3
A text WWW browser, similar to Lynx
local/linux-api-headers 2.6.32.5-2 (base)
Kernel headers sanitized for use in userspace
local/linux-atm 2.5.0-1
Drivers and tools to support ATM networking under Linux.
local/logrotate 3.7.8-1 (base)
Rotates system logs automatically
local/lpsolve 5.5.0.15-1
a Mixed Integer Linear Programming (MILP) solver
local/lua 5.1.4-4
A powerful light-weight programming language designed for extending
applications.
local/lucene 2.9.2-1
A high-performance, full-featured text search engine library written
entirely in Java
local/lvm2 2.02.60-3 (base)
Logical Volume Manager 2 utilities
local/lzo2 2.03-1 (base)
Portable lossless data compression library written in ANSI C
local/m4 1.4.14-1 (base-devel)
m4 macro processor
local/mach64-dri 7.7-1
Mesa DRI drivers for ATI Mach64
local/madwifi 0.9.4.4100-2
Madwifi drivers for Atheros wireless chipsets. For stock arch 2.6 kernel
local/madwifi-utils 0.9.4.4096-1
Userspace tools of madwifi drivers for Atheros wireless chipsets.
local/mailx 8.1.1-7 (base)
A commandline utility for sending email
local/make 3.81-4 (base-devel)
GNU make utility to maintain groups of programs
local/man-db 2.5.7-1 (base)
A utility for reading man pages
local/man-pages 3.24-1 (base)
Linux man pages
local/mcpp 2.7.2-2
Matsui's CPP implementation precisely conformed to standards
local/mdadm 3.1.1-2 (base)
A tool for managing/monitoring Linux md device arrays, also known as
Software RAID
local/meliae-svg-icon-theme 1.2-1
Here you are version n. 1.1 of the new Meliae Icon Theme (all icons are in
SVG format).
local/mesa 7.7-1
Mesa 3-D graphics libraries and include files
local/mga-dri 7.7-1
Mesa DRI drivers for Matrox
local/mkinitcpio 0.6.3-1 (base)
Modular initramfs image creation utility
local/mkinitcpio-busybox 1.15.3-5
base initramfs tools
local/mlocate 0.22.3-1
Faster merging drop-in for slocate
local/mobile-broadband-provider-info 0.20100301-1
Network Management daemon
local/module-init-tools 3.11.1-2 (base)
utilities needed by Linux systems for managing loadable kernel modules
local/mousepad 0.2.16-2 (xfce4)
Simple Text Editor for Xfce4 (based on Gedit)
local/mozilla-common 1.4-1
Common Initialization Profile for Mozilla.org products
local/mpfr 2.4.2-1
multiple-precision floating-point library
local/ms-sys 2.1.4-2
A tool to write Win9x/2k/XP/2k3/Vista/7/2k8 master boot records (mbr) under
linux - RTM!
local/mtools 4.0.13-1
A collection of utilities to access MS-DOS disks
local/nano 2.2.3-1 (base)
Pico editor clone with enhancements
local/ncurses 5.7-2 (base)
System V Release 4.0 curses emulation library
local/ndiswrapper 1.56-1
Module for NDIS (Windows Network Drivers) drivers supplied by vendors. For
stock arch 2.6 kernel.
local/ndiswrapper-utils 1.56-1
Binaries for ndiswrapper module
local/neon 0.28.6-2
HTTP and WebDAV client library with a C interface
local/net-tools 1.60-14 (base)
Configuration tools for Linux networking
local/network-manager-applet 0.8-2
GNOME frontends to NetWorkmanager
local/networkmanager 0.8-1
Network Management daemon
local/nfs-utils 1.2.2-1
Support programs for Network File Systems
local/nfsidmap 0.23-3
Library to help mapping IDs, mainly for NFSv4
local/notification-daemon 0.4.0-4 (gnome)
Notification daemon for the desktop notifications framework
local/nspr 4.8.3-1
Netscape Portable Runtime
local/nss 3.12.4-2
Mozilla Network Security Services
local/ntfs-3g 2010.1.16-1
Stable read and write NTFS driver
local/ntfsprogs 2.0.0-4
NTFS filesystem utilities
local/opencore-amr 0.1.2-1
Open source implementation of the Adaptive Multi Rate (AMR) speech codec
local/openexr 1.6.1-1
openexr library for EXR images
local/openjdk6 6.b17_1.7.1-1
Free Java environment based on OpenJDK 6.0 with IcedTea6 replacing binary
plugs.
local/openntpd 3.9p1-10
Free, easy to use implementation of the Network Time Protocol.
local/openoffice-base 3.2.0-1
OpenOffice.org - a free multiplatform and multilingual office suite -
testing branch leeding to next stable release
local/openssh 5.3p1-4
A Secure SHell server/client
local/openssl 0.9.8m-2
The Open Source toolkit for Secure Sockets Layer and Transport Layer
Security
local/ophcrack 3.3.1-4
A free Windows password cracker based on rainbow tables
local/orage 4.6.1-1 (xfce4)
A simple calendar application with reminders for Xfce
local/orbit2 2.14.17-1
Thin/fast CORBA ORB
local/pacman 3.3.3-1 (base)
A library-based package manager with dependency support
local/pacman-color 3.3.3-1
Command-line frontend for libalpm aka pacman with color patch
local/pacman-mirrorlist 20100131-1 (base)
Arch Linux mirror list for use by pacman
local/pam 1.1.1-1 (base)
PAM (Pluggable Authentication Modules) library
local/pango 1.26.2-1
A library for layout and rendering of text
local/pangomm 2.26.0-1
C++ bindings for pango
local/parted 2.2-1
A program for creating, destroying, resizing, checking and copying
partitions
local/patch 2.6.1-1 (base-devel)
A utility to apply patch files to original sources
local/pciutils 3.1.7-1 (base)
PCI bus configuration space access library and tools
local/pcmciautils 016-1 (base)
Utilities for inserting and removing PCMCIA cards
local/pcre 8.01-1 (base)
A library that implements Perl 5-style regular expressions
local/perl 5.10.1-5 (base)
Practical Extraction and Report Language
local/perl-error 0.17016-1
Perl/CPAN Error module - Error/exception handling in an OO-ish way
local/perl-locale-gettext 1.05-5
Permits access from Perl to the gettext() family of functions.
local/perl-xml-simple 2.18-2
Simple XML parser for perl
local/perlxml 2.36-2
XML::Parser - an XML parser module for perl
local/pidgin 2.6.6-1
Multi-protocol instant messaging client
local/pidgin-facebookchat 1.64-1
Facebook chat plugin for Pidgin and libpurple messengers.
local/pixman 0.16.6-1
Pixman library
local/pkgconfig 0.23-1 (base-devel)
A system for managing library compile/link flags
local/pkgtools 17-1
A collection of scripts for Arch Linux packages
local/pm-utils 1.2.6.1-4
Utilities and scripts for suspend and hibernate power management
local/polkit 0.96-2
Application development toolkit for controlling system-wide privileges
local/polkit-gnome 0.96-3
PolicyKit integration for the GNOME desktop
local/popt 1.15-1 (base)
A commandline option parser
local/postgresql-libs 8.4.2-4
Libraries for use with PostgreSQL
local/ppl 0.10.2-2
A modern library for convex polyhedra and other numerical abstractions.
local/ppp 2.4.5-1 (base)
A daemon which implements the PPP protocol for dial-up networking
local/preload 0.6.4-2
Makes applications run faster by prefetching binaries and shared objects
local/procinfo 19-3 (base)
Displays useful information from /proc
local/procps 3.2.8-1 (base)
Utilities for monitoring your system and processes on your system
local/psmisc 22.10-1 (base)
Miscellaneous procfs tools
local/psutils 1.17-2
A set of postscript utilities
local/pycairo 1.8.8-1
Python bindings for the cairo graphics library
local/pygobject 2.20.0-1
Python bindings for GObject
local/pygtk 2.16.0-2
Python bindings for the GTK widget set
local/python 2.6.5-1
A high-level scripting language
local/python-mpd 0.2.1-2
Python MPD client library
local/qt 4.6.2-1
A cross-platform application and UI framework
local/qwt 5.2.0-2
Qt Widgets for Technical Applications
local/r128-dri 7.7-1
Mesa DRI drivers for ATI Rage128
local/randrproto 1.3.1-1
X11 RandR extension wire protocol
local/raptor 1.4.21-1
A C library that parses RDF/XML/N-Triples into RDF triples
local/rasqal 0.9.19-1
a free C library that handles Resource Description Framework (RDF) query
syntaxes, query construction and query execution returning result bindings
local/readline 6.1.002-1
GNU readline library
local/recode 3.6-3
Converts files between various character sets and usages
local/recordproto 1.14-1
X11 Record extension wire protocol
local/redland 1.0.10-2
Library that provides a high-level interface to RDF data
local/reiserfsprogs 3.6.21-2 (base)
Reiserfs utilities
local/renderproto 0.11-1
X11 Render extension wire protocol
local/rp-pppoe 3.10-4 (base)
Roaring Penguin's Point-to-Point Protocol over Ethernet client
local/rpcbind 0.2.0-1
portmap replacement which supports RPC over various protocols
local/run-parts 3.2.2-1
run scripts or programs in a directory
local/savage-dri 7.7-1
Mesa DRI drivers for S3 Sraphics/VIA Savage
local/saxon 9.2.0.6-1
XSLT 2.0 / XPath 2.0 / XQuery 1.0 processor for Java - the open source Home
Edition
local/scrnsaverproto 1.2.0-1
X11 Screen Saver extension wire protocol
local/sdl 1.2.14-1
A library for portable low-level access to a video framebuffer, audio
output, mouse, and keyboard
local/sdl_gfx 2.0.20-1
SDL Graphic Primitives
local/sdl_image 1.2.10-2
A simple library to load images of various formats as SDL surfaces
local/sdl_mixer 1.2.11-2
A simple multi-channel audio mixer
local/sdl_net 1.2.7-3
A small sample cross-platform networking library
local/sdl_pango 0.1.2-2
Pango SDL binding
local/sdl_perl 2.2.6-3
A Perl wrapper for SDL
local/sdl_ttf 2.0.9-2
A library that allows you to use TrueType fonts in your SDL applications
local/sdparm 1.04-1 (base)
An utility similar to hdparm but for SCSI devices
local/sed 4.2.1-1 (base)
GNU stream editor
local/shadow 4.1.4.2-2 (base)
Shadow password file utilities
local/shared-mime-info 0.71-1
Freedesktop.org Shared MIME Info
local/silc-toolkit 1.1.10-1
Toolkit for Secure Internet Live Conferencing
local/sis-dri 7.7-1
Mesa DRI drivers for SiS
local/smbclient 3.5.1-1
Tools to access a server's filespace and printers via SMB
local/smpeg 0.4.4-5
SDL MPEG Player Library
local/sonata 1.6.2.1-1
Elegant GTK+ music client for MPD
local/speex 1.2rc1-1.1
A free codec for free speech
local/sqlite3 3.6.22-1
A C library that implements an SQL database engine
local/squeeze 0.2.3-2 (xfce4)
Squeeze is a modern and advanced archive manager for the Xfce Desktop
Environment.
local/startup-notification 0.10-1
Monitor and display application startup
local/sudo 1.7.2p5-1
Give certain users the ability to run some commands as root
local/sysfsutils 2.1.0-5 (base)
System Utilities Based on Sysfs
local/syslog-ng 3.0.4-3 (base)
Next-generation syslogd with advanced networking and filtering capabilities
local/sysvinit 2.86-5 (base)
Linux System V Init
local/taglib 1.6.1-1
library for reading and editing the meta-data of several popular audio
formats.
local/talloc 2.0.1-1
talloc is a hierarchical pool based memory allocator with destructors
local/tar 1.23-1 (base)
Utility used to store, backup, and transport files
local/tcp_wrappers 7.6-11 (base)
Monitors and Controls incoming TCP connections
local/tdb 1.2.1-1
A Trivia Database similar to GDBM but allows simultaneous commits
local/tdfx-dri 7.7-1
Mesa DRI drivers for 3dfx
local/terminal 0.4.4-1 (xfce4)
A modern terminal emulator primarly for the Xfce desktop environment
local/texinfo 4.13a-3 (base)
Utilities to work with and produce manuals, ASCII text, and on-line
documentation from a single source file
local/thunar 1.0.1-5 (xfce4)
new modern file manager for Xfce
local/ttf-dejavu 2.30-2
Font family based on the Bitstream Vera Fonts with a wider range of
characters
local/ttf-freefont 20090104-2
A set of free high-quality TrueType fonts covering the UCS character set
local/ttf-ms-fonts 2.0-2
Core TTF Fonts from Microsoft
local/ttf-vista-fonts 1-3
Microsoft Vista True Type Fonts
local/tzdata 2010e-1
Sources for time zone and daylight saving time data
local/udev 151-3 (base)
The userspace dev tools (udev)
local/unixodbc 2.2.14-2
ODBC is an open specification for providing application developers with a
predictable API with which to access Data Sources
local/unzip 6.0-5
Unpacks .zip archives such as those made by PKZIP
local/usbutils 0.86-2 (base)
USB Device Utilities
local/util-linux-ng 2.17.1-1 (base)
Miscellaneous system utilities for Linux
local/vbetool 1.1-1
vbetool uses lrmi in order to run code from the video BIOS
local/vi 050325-3 (base)
The original ex/vi text editor.
local/videoproto 2.3.0-1
X11 Video extension wire protocol
local/vigra 1.6.0-2
Computer vision library
local/vim 7.2.385-1
Vi Improved, a highly configurable, improved version of the vi text editor
local/virtualbox_bin 3.1.4-3
Powerful x86 virtualization (Personal Use Binaries Edition).
local/vlc 1.0.5-5
A multi-platform MPEG, VCD/DVD, and DivX player
local/vte 0.22.5-1
Virtual Terminal Emulator library
local/wget 1.12-1 (base)
A network utility to retrieve files from the Web
local/which 2.20-2 (base)
A utility to show the full path of commands
local/wine 1.1.41-1
A compatibility layer for running Windows programs
local/wireless_tools 29-3
Wireless Tools
local/wpa_supplicant 0.6.10-1 (base)
A utility providing key negotiation for WPA wireless networks
local/x264 20100312-1
free library for encoding H264/AVC video streams
local/xbitmaps 1.1.0-1
X.org Bitmap files
local/xcb-proto 1.6-1
XML-XCB protocol descriptions
local/xcb-util 0.3.6-1
Utility libraries for XC Binding
local/xchat 2.8.6-5
A GTK+ based IRC client
local/xcursor-themes 1.0.2-1
X.org Cursor themes
local/xcursor-vanilla-dmz-aa 0.4-5
Vanilla DMZ AA cursor theme
local/xdg-utils 1.0.2.20100303-1
Command line tools that assist applications with a variety of desktop
integration tasks.
local/xextproto 7.1.1-1
X11 various extension wire protocol
local/xf86-input-evdev 2.3.2-1 (xorg-input-drivers)
X.org evdev input driver
local/xf86-input-synaptics 1.2.1-1 (xorg-input-drivers)
synaptics driver for notebook touchpads
local/xf86-video-apm 1.2.2-2 (xorg-video-drivers)
X.org Alliance ProMotion video driver
local/xf86-video-ark 0.7.2-1 (xorg-video-drivers)
X.org ark video driver
local/xf86-video-ati 6.12.4-3 (xorg-video-drivers)
X.org ati video driver
local/xf86-video-chips 1.2.2-2 (xorg-video-drivers)
X.org Chips and Technologies video driver
local/xf86-video-cirrus 1.3.2-2 (xorg-video-drivers)
X.org Cirrus Logic video driver
local/xf86-video-dummy 0.3.2-2 (xorg-video-drivers)
X.org dummy video driver
local/xf86-video-fbdev 0.4.1-2 (xorg-video-drivers)
X.org framebuffer video driver
local/xf86-video-geode 2.11.6-1 (xorg-video-drivers)
X.org AMD/Geode LX & NX video driver
local/xf86-video-glint 1.2.4-2 (xorg-video-drivers)
X.org GLINT/Permedia video driver
local/xf86-video-i128 1.3.3-2 (xorg-video-drivers)
X.org Number 9 I128 video driver
local/xf86-video-i740 1.3.2-2 (xorg-video-drivers)
X.org Intel i740 video driver
local/xf86-video-intel 2.10.0-1 (xorg-video-drivers)
X.org Intel i810/i830/i915/945G/G965+ video drivers
local/xf86-video-mach64 6.8.2-2 (xorg-video-drivers)
X.org mach64 video driver
local/xf86-video-mga 1.4.11-2 (xorg-video-drivers)
X.org mga video driver
local/xf86-video-neomagic 1.2.4-3 (xorg-video-drivers)
X.org neomagic video driver
local/xf86-video-nv 2.1.17-1 (xorg-video-drivers)
X.org nv video driver
local/xf86-video-r128 6.8.1-2 (xorg-video-drivers)
X.org ati Rage128 video driver
local/xf86-video-radeonhd 1.3.0-1 (xorg-video-drivers)
Experimental Radeon HD video driver for r500 and r600 ATI cards
local/xf86-video-rendition 4.2.3-1 (xorg-video-drivers)
X.org Rendition video driver
local/xf86-video-s3 0.6.3-1 (xorg-video-drivers)
X.org S3 video driver
local/xf86-video-s3virge 1.10.3-1 (xorg-video-drivers)
X.org S3 Virge video driver
local/xf86-video-savage 2.3.1-2 (xorg-video-drivers)
X.org savage video driver
local/xf86-video-siliconmotion 1.7.3-2 (xorg-video-drivers)
X.org siliconmotion video driver
local/xf86-video-sis 0.10.2-3 (xorg-video-drivers)
X.org SiS video driver
local/xf86-video-sisusb 0.9.3-1 (xorg-video-drivers)
X.org SiS USB video driver
local/xf86-video-tdfx 1.4.3-2 (xorg-video-drivers)
X.org tdfx video driver
local/xf86-video-trident 1.3.3-3 (xorg-video-drivers)
X.org Trident video driver
local/xf86-video-tseng 1.2.3-1 (xorg-video-drivers)
X.org tseng video driver
local/xf86-video-v4l 0.2.0-4 (xorg-video-drivers)
X.org v4l video driver
local/xf86-video-vesa 2.2.1-1 (xorg xorg-video-drivers)
X.org vesa video driver
local/xf86-video-vmware 10.16.9-1 (xorg-video-drivers)
X.org vmware video driver
local/xf86-video-voodoo 1.2.3-1 (xorg-video-drivers)
X.org 3dfx Voodoo1/Voodoo2 2D video driver
local/xf86dgaproto 2.1-1
X11 Direct Graphics Access extension wire protocol
local/xf86miscproto 0.9.3-1
X11 XFree86-Miscellaneous extension wire protocol
local/xf86vidmodeproto 2.3-1
X11 Video Mode extension wire protocol
local/xfce-utils 4.6.1-2 (xfce4)
Utilities for Xfce
local/xfce4-appfinder 4.6.1-2 (xfce4)
Xfce application finder
local/xfce4-battery-plugin 0.5.1-2 (xfce4-goodies)
A battery monitor plugin for the Xfce panel
local/xfce4-diskperf-plugin 2.1.0-5 (xfce4-goodies)
Plugin for the Xfce4 panel displaying instant disk/partition performance
local/xfce4-icon-theme 4.4.3-1 (xfce4)
A set of icon themes for the Xfce window manager
local/xfce4-mixer 4.6.1-1 (xfce4)
The volume control plugin for the Xfce panel
local/xfce4-panel 4.6.3-1 (xfce4)
Panel for the Xfce desktop environment
local/xfce4-session 4.6.1-1 (xfce4)
A session manager for Xfce
local/xfce4-settings 4.6.4-1 (xfce4)
Settings manager for xfce
local/xfconf 4.6.1-3 (xfce4)
xfconf.. thingie
local/xfdesktop 4.6.1-1 (xfce4)
A desktop manager for Xfce
local/xfprint 4.6.1-2 (xfce4)
A print dialog and a printer manager for Xfce
local/xfsprogs 3.1.1-1 (base)
XFS filesystem utilities
local/xfwm4 4.6.1-1 (xfce4)
Xfce window manager, compatible with Gnome, Gnome2, KDE2, and KDE3
local/xfwm4-themes 4.6.0-1 (xfce4)
A set of additionnal themes for the Xfce window manager
local/xineramaproto 1.2-1
X11 Xinerama extension wire protocol
local/xkeyboard-config 1.8-1
X keyboard configuration files
local/xorg-apps 7.5-3
Various X.Org applications
local/xorg-docs 1.5-1 (xorg)
X.org documentations
local/xorg-font-utils 7.5-2
X.Org font utilities
local/xorg-fonts-100dpi 1.0.1-3 (xorg)
X.org 100dpi fonts
local/xorg-fonts-75dpi 1.0.1-3 (xorg)
X.org 75dpi fonts
local/xorg-fonts-alias 1.0.2-1
X.org font alias files
local/xorg-fonts-encodings 1.0.3-1
X.org font encoding files
local/xorg-fonts-misc 1.0.1-1
X.org misc fonts
local/xorg-res-utils 1.0.3-3 (xorg)
X.Org X11 resource utilities
local/xorg-server 1.7.5.902-1 (xorg)
X.Org X servers
local/xorg-server-utils 7.5-3 (xorg)
X.Org utilities required by xorg-server
local/xorg-twm 1.0.4-3 (xorg)
Tab Window Manager for the X Window System
local/xorg-utils 7.6-1 (xorg)
Collection of client utilities used to query the X server
local/xorg-xauth 1.0.4-1
X.Org authorization settings program
local/xorg-xinit 1.2.0-1 (xorg)
X.Org initialisation program
local/xorg-xkb-utils 7.5-2
X.org keyboard utilities
local/xproto 7.0.16-1
X11 core wire protocol and auxiliary headers
local/xsel 1.2.0-1
XSel is a command-line program for getting and setting the contents of the X
selection
local/xterm 255-1 (xorg)
X Terminal Emulator
local/xvidcore 1.2.2-1
XviD is an open source MPEG-4 video codec
local/xz-utils 4.999.9beta-2
utils for managing LZMA and XZ compressed files
local/yaourt-git 20100319-1
A pacman wrapper with extended features and AUR support
local/zd1211-firmware 1.4-3
Firmware for the in-kernel26 zd1211rw wireless driver
local/zlib 1.2.4-1
Compression library implementing the deflate compression method found in
gzip and PKZIP
local/zvbi 0.2.33-2
VBI capture and decoding library
Output of lsmod
Module Size Used by
nls_cp437 4513 1
vfat 8348 1
fat 43888 1 vfat
ipv6 237596 22
snd_hda_codec_analog 51443 1
i915 267595 2
drm_kms_helper 21971 1 i915
i2c_i801 7122 0
drm 126556 3 i915,drm_kms_helper
i2c_algo_bit 4219 1 i915
ndiswrapper 172796 0
usbhid 33579 0
hid 61085 1 usbhid
i2c_core 15369 4 i915,i2c_i801,drm,i2c_algo_bit
iTCO_wdt 7577 0
ppdev 4882 0
lp 6616 0
video 14871 1 i915
e1000e 112803 0
ide_pci_generic 2008 0
button 3638 1 i915
iTCO_vendor_support 1453 1 iTCO_wdt
output 1404 1 video
ide_core 76951 1 ide_pci_generic
intel_agp 23225 1
agpgart 23331 2 drm,intel_agp
processor 26526 2
dcdbas 4440 0
thermal 9326 0
sg 21079 0
psmouse 56309 0
serio_raw 3620 0
snd_seq_dummy 1099 0
snd_seq_oss 25304 0
snd_seq_midi_event 4452 1 snd_seq_oss
snd_seq 42628 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 4313 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_hda_intel 18985 0
snd_pcm_oss 33693 0
snd_mixer_oss 14810 1 snd_pcm_oss
snd_hda_codec 56728 2 snd_hda_codec_analog,snd_hda_intel
parport_pc 27680 1
snd_hwdep 5102 1 snd_hda_codec
snd_pcm 57351 3 snd_hda_intel,snd_pcm_oss,snd_hda_codec
parport 26575 3 ppdev,lp,parport_pc
snd_timer 16117 2 snd_seq,snd_pcm
pcspkr 1347 0
evdev 6970 8
snd 43847 11 snd_hda_codec_analog,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 5007 1 snd
snd_page_alloc 5841 2 snd_hda_intel,snd_pcm
loop 11399 0
rtc_cmos 7504 0
rtc_core 12011 1 rtc_cmos
rtc_lib 1450 1 rtc_core
ext2 56463 1
mbcache 4278 1 ext2
sr_mod 13161 0
cdrom 31625 1 sr_mod
sd_mod 24101 3
usb_storage 34006 2
pata_acpi 2264 0
ata_generic 2235 0
ata_piix 17725 0
uhci_hcd 19156 0
libata 135579 3 pata_acpi,ata_generic,ata_piix
scsi_mod 78933 5 sg,sr_mod,sd_mod,usb_storage,libata
ehci_hcd 31594 0
usbcore 118921 6 ndiswrapper,usbhid,usb_storage,uhci_hcd,ehci_hcd
Maybe you are looking for
-
Please help me decode frequent kernel panic crashes on my macbook pro, I have not been able to diagnose the real cause, I am pasting my last panic report below, any help will be highly appreciated... Interval Since Last Panic Report: 24790 sec Panic
-
Record inserting twice on insert button trigger
hi developers, I am designing a simple form whilch contains the datablock in tabluar form and showing the data from the table to which the data block is connected... i have an button INSERT ....when clicking the insert button the record should be ins
-
Replacing BC with SAP XI-URGENT
Hi Experts , I have a query related to a case in which we want to replace SAP BC with SAPXI. The client is going for an upgradation from SAP R/3 4.6 c to ECC 6.0 and they have architecture like 4.6c--- BC-SAP Adapter--- Customized Adapters(Third part
-
I have a 16G Thrive. Of that there is about 10G for my use. A check of the file manager tells me I'm using over 9G of that space. But when I add up what I think I'm using it only totals about 6G for my pictures, movies and a few other small files tha
-
HT1848 My rented movie is nowhere to be found on my itouch.
I moved my rented movie from my itunes account to my iPod touch. Itunes tranferred the file and it showed up on the device in the itunes menu bar. But when I go to the iTouch, the movie is nowhere to be found. I have done this numerous times, but