Very unstable wrt120n

I have a new wrt120N, it is only used in 2 story appartment and mostly i am like 2 meters away from the router.
But my internet stops working for 30 seconds and that every 1/2/3 hour. 
Me setup is currently a telfort zyxel router set to bridge and the linksys wrt120n set as router.
I tried the router/switch setup got the same results. I did set mtu to 1300, and some other settings I found on this forum.
Nothing worked, getting pretty tired of this router, my old router didn't had this kind of problems, I tried the same setup as my old router wich was also a linksys and it didn't worked.
Edit: I had it from the beginning I got this router, I upgraded to the latest firmware and that didn't do anything. (resetted reconfigured etc.)
Message Edited by Haas on 01-25-2010 12:48 PM
Message Edited by OnnagokorO on 01-25-2010 01:29 PM

What is the ip address you are getting from the modem...? Connect the computer directly to the modem..Go to command prompt and type ipconfig/all>>>hit enter..Now post all the information in your next post.
If the modem is in the bridge mode then,you need to do PPPoE settings on the router.

Similar Messages

  • My iPad 1 is now very unstable. Apps crash consistently, Mac Numbers/Pages etc incompatible with IOS 5.1 etc. There seems to be no backwards compatibility to iPad 1. Am I just supposed to throw it away? I have restored the iPOad and it has ample storage .

    My iPad 1 is very unstable. Many Apps simply crash after opening. There is ample storage available.I have restored the iPad twice now and still it is unstable.
    Is this a lack of backwards compatibility because no-one writes apps for IOS 51.1. and the original iPad anymore? not even Apple, as the documents and sheets I create on my Mac are incompatible with my iPad now.
    My naievete tells me that this is simply Apple expecting us to upgrade to later levels of hardware. If so, very disappointing for an Apple fan. Seems your App developer approvals (even your own apps) do no require compatibility with anything but IOS 6 or later.

    There are various things to make your iPad more stable. You can try deleting all apps from the multitasking bar; do a reset ie hold the power and home buttons simultaneously until the Apple logo appears; Settings > General > Reset all Settings.
    If you had the previous version of iPages (version 09) on your Mac before upgrading to Pages 5.2, your Mac should still have that version in Applications, which is still compatible with your version of Pages on your iPad.
    If you don't have that version, you can 'Export to Pages 09' which is still compatible with iOS 5.1.1.

  • Computer randomly shuts down/Very unstable since upgrade to yosemite

    Since upgrading to yosemite my computer has become very unstable.
    For anyone that can help with what may be causing this issue I would really
    appreciate it. As for "Adobe" being a possible cause, how can I determine
    which Adobe program and related files are the culprit?
    Thank you very much to anyone who offer's their support and help.
    EtreCheck version: 2.1.8 (121)
    Report generated February 10, 2015 at 12:59:00 PM MST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,1
        1 2.3 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 209
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 384 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 0:9:57
    Disk Information: ℹ️
        Hitachi HTS545032B9A302 disk0 : (320.07 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 318.84 GB (62.33 GB free)
                Core Storage: disk0s2 319.21 GB Online
        MATSHITADVD-R   UJ-8A8
    USB Information: ℹ️
        Apple Computer, Inc. IR Receiver
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Configuration files: ℹ️
        /etc/hosts - Count: 15
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Application Support/Roxio
        [not loaded]    com.roxio.TDIXController (1.7) [Click for support]
            /System/Library/Extensions
        [loaded]    com.manycamllc.driver.ManyCamDriver (0.0.9 - SDK 10.5) [Click for support]
        [not loaded]    com.paceap.kext.PACESupport (5.4) [Click for support]
        [not loaded]    com.paceap.kext.PACESupport2 (5.4) [Click for support]
        [loaded]    com.rim.driver.BlackBerryUSBDriverInt (0.0.74) [Click for support]
        [not loaded]    com.rim.driver.BlackBerryUSBDriverVSP (0.0.74) [Click for support]
        [not loaded]    com.symantec.kext.ips (1.3.1f6) [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [not loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
        [not loaded]    com.epson.eventmanager.agent.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [not loaded]    com.rim.BBAlbumArtCacher.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [failed]    com.parallels.mobile.kextloader.launchdaemon.plist [Click for support]
        [running]    com.rim.BBDaemon.plist [Click for support]
        [running]    com.smithmicro.schedulerdaemon.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [failed]    com.avast.home.userinit.plist [Click for support]
        [loaded]    com.divx.agent.postinstall.plist [Click for support]
        [not loaded]    com.facebook.videochat.[redacted].plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
        [not loaded]    com.smithmicro.cleaning.schedulermailer.plist [Click for support]
    User Login Items: ℹ️
        Google Chrome    Application Hidden (/Applications/Google Chrome.app)
        BlackBerry Device Manager    Application  (/Library/Application Support/BlackBerry/BlackBerry Device Manager.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        DivXBrowserPlugin: Version: 2.2 [Click for support]
        o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
        googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    Safari Extensions: ℹ️
        Open in Internet Explorer
        DivX Plus Web Player HTML5 <video>
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: ON
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 318.84 GB Disk used: 256.51 GB
        Destinations:
            Data [Network]
            Total size: 3.00 TB
            Total number of backups: 30
            Oldest backup: 2014-12-22 10:14:08 +0000
            Last backup: 2015-02-10 02:49:48 +0000
            Size of backup disk: Excellent
                Backup size 3.00 TB > (Disk size 318.84 GB X 3)
    Top Processes by CPU: ℹ️
             7%    WindowServer
             1%    Google Chrome
             0%    opendirectoryd
    Top Processes by Memory: ℹ️
        129 MB    Google Chrome
        103 MB    Safari
        90 MB    WindowServer
        73 MB    Spotlight
        64 MB    Finder
    Virtual Memory Information: ℹ️
        81 MB    Free RAM
        1.50 GB    Active RAM
        1.41 GB    Inactive RAM
        1.05 GB    Wired RAM
        1.66 GB    Page-ins
        21 MB    Page-outs
    Diagnostics Information: ℹ️
        Feb 10, 2015, 12:42:48 PM    Self test - passed
        Feb 9, 2015, 05:23:10 PM    /Library/Logs/DiagnosticReports/mdworker_2015-02-09-172310_[redacted].crash

    A number of problems exist including the likelihood of system corruption as a result of using CleanMyMac.
    It is not reasonable to expect a Mac to operate normally after using CleanMyMac. Like many ill-conceived "cleaning" utilities, it is capable of corrupting a Mac to the point that erasing it completely is the only practicable means of recovery. CleanMyMac is not the only example; it is merely popular due to marketing strategies that are as effective as they are intrusive.
    There is no practicable way to reverse the effects of having used CleanMyMac2 other than to reinstall all affected files from backups or their original sources. Its developer's uninstallation instructions are ineffective despite their recent claims to the contrary. Only MacPaw, its developer, can know the reason for that, but I can think of two possibilities: either they are purposefully leaving components behind for reasons known only to them, or they simply don't know what they're doing. Neither one of those possibilities is particularly comforting for the user.
    Reinstalling OS X alone will have no effect on either removing CleanMyMac or reversing the damage it is capable of inflicting upon a system.
    Besides CleanMyMac2, garbage "cleaning" and "anti-virus" software exists, specifically "Avast", "Smith Micro", and "Symantec / Norton". Those products should not be installed on any Mac, because they convey no benefit and are only capable of creating or contributing to problems.
    In addition, that Mac's Hosts file appears to have been modified. Fixing a modified Hosts file requires specific instructions. Apple Support Communities contributor and EtreCheck author etresoft recently added a User Tip discussing that concern, and how to correct it: Fixing a hacked /etc/hosts file
    The recovery procedure that follows will obviate the need to correct all those separate problems and is likely to require the least amount of your time and interaction.
    Follow the applicable recovery procedure below:
    If you have a backup that you created prior to using CleanMyMac, now is the time to use it. For Time Machine, boot OS X Recovery, and at the Mac OS X Utilities screen, choose Restore from Time Machine Backup. Choose a date preceding the installation of CleanMyMac.
    If you do not have a backup that predates the use of CleanMyMac, create one now. To do that read Mac Basics: Time Machine backs up your Mac.
    The recovery procedure will require that you erase the Mac using OS X Recovery, and then create a new user whose contents will be empty. You will then be able to use Setup Assistant to migrate your essential documents including photos, music, work products and other essential files.
    When doing so, select only your previous User account and do not select "Applications", "Computer and Network Settings" or "Other files and folders". De-select those choices.
    Subsequent to using Setup Assistant, you will need to reinstall the essential software you may require, once again remembering to install software only from their original sources, and omitting all non-essential software.
    To erase and install Yosemite read: OS X Yosemite: Erase and reinstall OS X
    To migrate your essential documents read: OS X Yosemite: Transfer your info from a computer or storage device and follow the procedure under Transfer info from a Time Machine backup or other storage device.

  • Iphone 4 running 4.3.5 wifi very unstable/will not connect to network

    Hi all iPhone users. Im new to this so please bear with me. I have an iPhone 4 (had for about 1 month or so). I have recently updated to the new 4.3.5 software. Sice then, my wifi seems to be very very unstable. Im only about 10ft from my router and when I go to connect, I get an error saying 'unable to join network'. I previously had an iphone 3gs and that connected fine further away.
    When my iphone 4 does connect, the connection lasts about 10-15 secs and then it will not load any web pages although it shows its connected. I have tried all methods on previous threads but nothing seems to work. Ive also tried retting my router and changing the wifi channel to make the signal stronger but nothing seems to work.
    Ive seem some threads where people have 'put them in the freezer' but im not willing to do that as the phone is only a month old. Ive tried the network reset, the hard reset, re-installing itunes and trying the update again but it nothing seems to work.
    Any help or advise would be much appreciated.
    Thanks

    Hi folks,
    SOLVED
    iPhone 4 wasn't having any joy (and neither was my new 4s).
    Tried turning OFF the security on the router, connecting the iPhones (yep, they connected OK) then turning on the security (WPA2-PSK [AES]) and both iPhones still connected.
    So, it looks like this is the way to solve a non-connecting iPhone 4/4s with a Netgear WiFi router.
    Hope this helps others with the same problem.
    Regards
    RB

  • Premiere Pro CC 2014 Very Unstable

    My CC2014 is very unstable since I have updated my Adobe Creative Cloud Software from CC to CC 2014, and I've been an adobe user since 1999 and I switched from FCP to Premiere in 2012. Everything has been great until the last two upgrades. What is going on???
    My Premiere Pro has been very unstable. I can't keep it running for more than an hour before I receive the Premiere Pro has encountered a serious error and must shut down. I can't get anything done. I've gone from working 40 hours a week to 60 hours a week since I upgraded. This is extremely counter productive. Please HELP!!!!
    I am experiencing difficulty with Illustrator a lot too, but not as important just wondering if somehow related.
    System Info:
    Creative Cloud 2014 Updated September 2nd, 2014 - Everyday I use; PP, AE, AU, IL, PS, ID.
    Mac Pro Mid 2010
    32 GB Ram
    OS: 10.7.5
    Processor: 2 x 2.4 GHz Quad-Core Intel Xeon

    Hi chriscorrell,
    Thank you for posting on Adobe forums.
    Upgrading your OS might be a good idea because Premiere CC 2014's OS requirement is OS X 10.8.
    See here: System requirements | Adobe Premiere Pro
    Thanks,
    Rameez

  • Has anyone noticed that Messages (iChat) is very unstable on OS 10.8.3?

    I have a 27 inch iMac i5 with 4 GB of RAM. Since upgrading to OS 10.8.3, Messages (iChat) has become very unstable, freezing at least once or twice a day. This behavior is mainly associated with my sending iMessages to iPhone users. The problem is solved by force quitting and re-starting the app. The activity monitor shows the app to be consuming several hundred megabytes of memory when this happens, and the computer slows down considerably, but remains responsive. No other apps have become unstable.
    My internet searches are too poorly worded to be of use--searching for "messages" or "ichat" does not yield any results or even any discussion of this kind of unstability. Any thoughts?

    peteangus wrote:
    Thank you all, a reset all settings cleared up the problem, however I have now lost all my wi-fi passwords.
    If you reset all settings then your passwords for Wi-Fi will have been cleared. You will need to enter them again for each Wi-Fi network you connect to.

  • New Mac Book: very unstable on several apps???

    Hi all,
    I just bought my gf a brand new macbook, so she could change from a crappy toshiba with windows to osx.
    After a few weeks of running it, I have come to the conclusion that it is not working well at all!
    To start with, she works on large word files. I have installed both office for mac 2004 and the new 2008,. but both show very poor performance, and keep on crashing to desktop when using advanced functions. (how hard can word really be on a processor???)
    Then, Safari is also very unstable. When using about 5 tabs or more, it usually crashes as well, or starts hanging for ever. Also, when opening pdf files in safari, with the adobe plug-inn, it usually also hangs safari, very annoying!
    but then it came to me last night: All these problems must be leopard related.
    I run a G5 Quad myself, and upgraded to leopard, only to downgrade it the next day to tiger, since most of my apps were very unstable on leopard.
    So my question is, do you guys think my assessment is correct, and that the most likely solution to the problems I am having is a downgrade to tiger?
    I'm hoping to get some oppinions on this.
    Thanks in advance for any input.
    Cheers,

    Just to build on what hyphen has said:
    Don't use earlier OS than came with the computer:
    http://docs.info.apple.com/article.html?artnum=25784
    Additionally, read about About "Downgrade" installations
    +"You should not reinstall an earlier version of the same software over a later version. These "downgrade" installs may seem to work, but Apple does not test nor recommend downgrade installations in most cases. Some installers prevent downgrade installations. If you need to reinstall an earlier version of Mac OS X, erase your disk first or choose the erase option in the Mac OS X Installer. Be sure to reinstall any software updates after reinstalling the operating system."+
    -mj
    [email protected]

  • Bridge CS5 Very Unstable when Previewing SWF files - fixes pending?

    Bridge CS5 is very unstable when an SWF file is playing back in the Preview panel.
    I only have to switch to another window, and Bridge bombs out.
    Is this a known issue? Is a fix pending?
    Thanks
    Richard
    I'm on XP Pro SP3.

    That's a very "Curt" response!
    The graphics driver is the latest available for my graphics card - a NVidia Go 7900GS.
    Thanks
    Richard

  • At work we have many who travel with train alot, where the internet is very unstable at best. And  they have trouble getting their e-mails. So the question is if there is a way to increase the mail cache in iOS 7, to lower the dependence of internet.

    At work we have many who travel with train alot, where the internet is very unstable at best. And  they have trouble getting their e-mails.
    So the question is if there is a way to increase the mail cache in iOS 7, to lower the dependency of a very poor internet connection.

    I don't think so. Unless it's in the settings, there's not much that can be done.
    are they using wifi on the train? If so, maybe switching to cellular. There are devices like the Mifi, which is a battery operated portable wifi hotspot that they can connect their device to.
    If the wifi on the train is solid, I know I've had issues using certain hotspots. For example, my yahoo mail simply will not pull down via the mail app if I'm on some AT&T hot spots. But if I go in via safari then it works. So if the signal is good, maybe using a different way can help.
    Or maybe looking for a mail interface that isn't apple's. There are others in the app store that may have better function or more control.

  • H57M-ED65 - system very unstable

    Hi All, I have just built a new system and am finding it very unstable, I thought i'd see if anyone has any thoughts on what the problem might be
    H57M-ED65 mainboard
    Intel i5 650 CPU
    on-board graphics
    geil DDR3 RAM
    coolermaster 600 W PSU
    So I'm finding the system is very unstable, I get frequent random resets. by reset's I mean that the system power's off (as if the reset button has been pressed), the fan's spin down, then a moment later start up again and the system post's. I dont see any pattern to this (ie it doesn't always happen when i'm doing CPU intensive work or memory/ IO intensive work.)  At least once it's corrupted the BIOS settings in the process of going down.
    I dont think this is a heat problem - the CPU temp is fairly stable under a high workload (prime95 running) - approx 40deg c +- a few degrees. I have had prime95 run for several hours ok without a reset and then had it reset when idle doing nothing.
    The bios version is as shipped - v1.1 - i'm a little reluctant to re-flash when the systems so unstable, I'm not too keen on the idea of it resetting part way through flashing.
    I should probably add that i'm not overclocking anything. 
    I have had the system reset on me when tweaking the fan speeds in the MSI control panel software - though that could be a co-incidence ...
    So any ideas ? Anything worth trying  / or RMA the board ?

     Sounds like the same problem I had with my H55 with original BIOS and RAM compatibility. BIOS updates include memory compatibility so it's recommended you update BIOS for that reason. I had an H57M-ED but it came with BIOS 1.3 and didn't have that problem. That being said I prefer the Crucial RAM you see in my signature for the H55/H57 MB's.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16820148262
     Wise decision not trying to flash BIOS yet. Do like Jack said before anything else but I would recommend returning RAM and exchange for Crucial.

  • Safari very unstable

    Since I have done the 3.0 update, Safari on my iPod Touch 1st generation has become very unstable (it crashes more than 2 times in 1 minute) so I wanted to know if some other people had also this problem and how to resolve it...

    It is not a Wifi or what else problem it is a application problem (Safari lag THEN crashes after) and yes I restored from a backup and it is not a network problem because before i update my iTouch, I did nort gad this problem....
    And I just wanted to know if I backup as new iPod, will I loose all my songs from my iTuneslibrary and else or will I keep them and then I just have to synchronise my iPod and get my songs and apps and else back?

  • My book marks library is very unstable; they become scrambed, multiply and some are lost - solutiuon?

    My book marks library is very unstable; they become scrambed, multiply and some are lost - solutiuon?

    First of all backup your Firefox profile, or at the very least the profile file ''places.sqlite'' and the bookmarks backup folder.Put the files somewhere safe outside the Firefox paths, the Windows Desktop is suitable.
    * [[Back up and restore information in Firefox profiles]]
    Now try to repair the bookmarks database using this add-on
    * https://addons.mozilla.org/en-US/firefox/addon/places-maintenance/
    If that fails try to recreate the database by deleting the original file and allowing Firefox to restore it from a backup
    * see [[Can't add, change or save bookmarks - How to fix#w_create-a-new-bookmarks-file]]_create-a-new-bookmarks-file

  • I find Safari is very unstable on iPad!

    Are other people finding iPad is very unstable when using Safari?

    No, but then again the problem didn't seem to exist before iOS 5.x. Look in the many other existing threads on this issue for suggestions/fixes.

  • Very unstable book created with the DPS

    We have created a book of some 450 pages.
    The fact is that is very very unstable with the ipad (content viewer)
    Anyone know if stability is improved when the App is created or is it similar?
    The book holds few seconds from a time is closed, it is totally useless.
    We have a presentation within a few days with the client, we are desperate,
    because it is a project we've worked for months ... and now not much.
    Someone is just like us?
    There is a possible solution?
    Someone can give us any help or hint?
    THANKS

    Hello again,
    Within a script-enabled Web content based on jQuery.
    Basically it is a system of Sliders, namely RoyalSlider can be found in codecanyon.net.
    This module allows slide pictures with your finger.
    Now we're re-creating the entire book with the system moving images offered by the DPS.
    But the user experience will be much poorer.
    Thanks for everything

  • Gvim very unstable

    Hi all,
    My GVim (installed from the Arch repos) has recently become very unstable, easily segfaulting every couple of minutes.
    I do use a fairly large number of plugins (see below) and I could try disactivating them one at a time to see if one of them is the culprit but I'd rather not go though that route, so has anyone had this kind of problem before?
    Thanks in advance.
    Bundle 'AnsiEsc.vim'
    Bundle 'calendar.vim'
    Bundle 'Color-Sampler-Pack'
    Bundle 'colorsupport.vim'
    Bundle 'easytags.vim'
    Bundle 'echofunc.vim'
    Bundle 'sjl/gundo.vim'
    Bundle 'Indent-Guides'
    Bundle 'indentpython.vim'
    Bundle 'LargeFile'
    Bundle 'LaTeX-Box'
    Bundle 'number-marks'
    Bundle 'matchit.zip'
    Bundle 'MatlabFilesEdition'
    Bundle 'mlint.vim--Ibbotson'
    Bundle 'mru.vim'
    Bundle 'perl.vim'
    Bundle 'Python-Syntax-Folding'
    Bundle 'quickfixsigns'
    Bundle 'recover.vim'
    Bundle 'repeat.vim'
    Bundle 'Screen-vim---gnu-screentmux'
    Bundle 'sherlock.vim'
    Bundle 'snipMate'
    Bundle 'spacehi.vim'
    Bundle 'surround.vim'
    Bundle 'SuperTab-continued.'
    Bundle 'tabpagecolorscheme'
    Bundle 'Tagbar'
    Bundle 'tex.vim--Tanzler'
    Bundle 'The-NERD-Commenter'
    Bundle 'The-NERD-tree'
    Bundle 'VimClojure'
    Bundle 'vim-ipython'
    Bundle 'VimOutliner'
    Bundle 'vimoutliner-colorscheme-fix'
    Bundle 'gmarik/vundle'
    Bundle 'othree/xml.vim'
    Bundle 'YankRing.vim

    Actually vim crashes in the same fashion...  I'm using emacs with evil mode right now as a backup but I'm far from having reached my previous level of customization, and that sucks :-)
    My computer works fine other than that, so I don't think it's a hardware issue.
    On the other hand, I noticed that when this instability started, I would get "deadly signal segv caught" printed to my terminal after the crash, but now sometimes I don't even get that line anymore.

Maybe you are looking for