VERY UREGENT:UPGRADATION FROM BW 3.0B TO SAP NETWEAVERS

HI ALL,
We are currently planning to Upgrade TO SAP Netweavers 2004 (BI).Our Current version is 3.0B.Now We are planning about the preupgrade Activities.As far as the upgrade plan is concerned ,Our client is currently only concerned about Technical upgrade and the rest about using the new technology will be planned later while we finish the technical upgrade.I have already gone through various Links in SDN .But ,I have certain Questions ,So i would like to have specific answers from you.Also ,I want to know about the sizing requirements.?
1.1 what space SAP says is required to do Minimize Downtime
1.2) cpu & memory
2) Add requirements such as GUI ---Netweaver GUI???
3)What is the minimum support pack level that should be applied before we upgrade to Sap Netweavers and what is the latest support pack level?
4) what are the plugins that need to be installed?
5) what is meant by database upgrade (Database & SAP Kernel upgrade) and system upgrade and what do we need to do?
6)What is Regression testing?
7)what is meant by SPAU list review?
8) what do u mean by Prepare Run and what are the activities that are done in this phase and what are Pre Prepare Phase Activities?
9)What is external IGS server with v3.0B?
Please take some time out and help me in this regard.Points will be assigned.This is very urgent for me.
I also want to know ,approximately ,what is the time taken to complete the technical upgrade?
Regards,
Samir

Hi Samir,
Refer these links
Below links for upgradation material for BI 7.0.
BI platform:
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/594e3c6bf4233fe10000000a114084/frameset.htm
performance optimization
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
analysis & repair environment
http://help.sap.com/saphelp_nw2004s/helpdata/en/92/1d733b73a8f706e10000000a11402f/frameset.htm
scheduler
http://help.sap.com/saphelp_nw2004s/helpdata/en/e1/b7463c32a3fe13e10000000a114084/frameset.htm
FI extraction
http://help.sap.com/saphelp_bw32/helpdata/en/af/16533bbb15b762e10000000a114084/frameset.htm
whats new in BI 7.0
http://help.sap.com/saphelp_nw04s/helpdata/en/57/a21f407b402402e10000000a1550b0/frameset.htm
System administration tasks
http://help.sap.com/saphelp_bw30b/helpdata/en/d1/e81c3b85e6e939e10000000a11402f/frameset.htm
process chains
http://help.sap.com/saphelp_nw70/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
WAD screen cam
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6dd54713-0c01-0010-8691-a3576b9a95d9
BI content installation
http://help.sap.com/saphelp_nw2004s/helpdata/en/c1/ea683cc5e8ca68e10000000a114084/frameset.htm
BI suite :Business Explorer
http://help.sap.com/saphelp_nw2004s/helpdata/en/5b/30d43b0527a17be10000000a114084/frameset.htm
BI 7.0 & EP 7.0 integration
Re: BI 7.0 and EP 7.0 Integration
DTP's
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fb8ed8481e1a61e10000000a422035/frameset.htm
Hope this helps
Regards
KArthik

Similar Messages

Upgrade from 2007A SP0 PL38 to 8.8 SP0 PL21

I want to upgrade from 2007A SP0 PL38 To 8.8 SP0 PL21
Is this the right package:
B18800_21-10003894.ZIP SAP Business One 8.8 Upgrade (SP00)
Does it have an upgrade wizard i.e...can I go directly from 2007A SP0 PL38 To 8.8 SP0 PL21 with this package?
Thanks

Hi Maeve..........
Yes this is the correct PL setup for SAP 8.8.
It will help you to upgrade from your existing PL to SAP 8.8 PL 21.
You can find Wizard setup up in this Folder........
Regards,
Rahul

I have windstream as an isp. Since your upgrade from 4.0, and their upgrade, my computer is very slow, drops, freezes and to be frank, a pain in the back side. It was better with 4.0. Can I go back?? I need help!

I currently have firefox 6.0, and the newer version of windstream email. When I open firefox and then go to windstream.net and attempt to log into my email account, the program goes into a loop cycle and it keeps returning to the log in page. I have contacted Windstream and they say it is not their fault, but they also said that they were having problems with other customers. I can get to the email via IE, My computer is a Dell 3200 Inspirion and is and was very fast, enough so for me, but when you have to wait 2 minutes for an email to open, . To be honest, it could be something or a program that has infected my computer, but I have run Norton anti virus and it see's nothing. Running some of the commerical virus program checker's, they identify problems, but this problem has only shown up since your upgrade from 4.0 and windstreams upgrade to a newer version of their email system....

I currently have firefox 6.0, and the newer version of windstream email. When I open firefox and then go to windstream.net and attempt to log into my email account, the program goes into a loop cycle and it keeps returning to the log in page. I have contacted Windstream and they say it is not their fault, but they also said that they were having problems with other customers. I can get to the email via IE, My computer is a Dell 3200 Inspirion and is and was very fast, enough so for me, but when you have to wait 2 minutes for an email to open, . To be honest, it could be something or a program that has infected my computer, but I have run Norton anti virus and it see's nothing. Running some of the commerical virus program checker's, they identify problems, but this problem has only shown up since your upgrade from 4.0 and windstreams upgrade to a newer version of their email system....

I just upgraded from PS cs4 to cs6. All of my files open up viewing at .0625% - which is very irrita

I just upgraded from PS cs4 to cs6. All of my files open up viewing at .0625% - which is very irritating. How can I change this?

Are you on a Mac or PC? If the former, do you have the Application Frame visible?
Could you post a screenshot of how Photoshop CS6 looks when you first open an image and have it show at the tiny size?
Chances are you've made the main Photoshop window small, which is causing it to try to fit a newly opened image in too small a space.
I'm going to make a wild guess that you're on a Mac, and have dragged the bottom edge of the Photoshop window up instead of turning off the Application Frame, so as to be able to see your desktop.
-Noel

Windows 8.1 RDP crashes very frequently after upgrade from Windows 8

Hello,
I installed Windows 8.1 EE x64 as upgrade from Windows 8 EE x64 on my personal computer. After that RDP crashes very frequently.
Here is my errors from event viewer (I have Czech language so sorry for it)
Application Error (ID: 1000)
==================
General
Název chybující aplikace: mstsc.exe, verze: 6.3.9600.16384, časové razítko: 0x5215e2b5
Název chybujícího modulu: ntdll.dll, verze: 6.3.9600.16384, časové razítko: 0x5215f938
Kód výjimky: 0xc0000005
Posun chyby: 0x000000000002de46
ID chybujícího procesu: 0x1ef8
Čas spuštění chybující aplikace: 0x01ceb5de1d230682
Cesta k chybující aplikaci: C:\Windows\System32\mstsc.exe
Cesta k chybujícímu modulu: C:\WINDOWS\SYSTEM32\ntdll.dll
ID zprávy: 6e76e3a0-21d1-11e3-824d-005056c00008
Úplný název chybujícího balíčku:
ID aplikace související s chybujícím balíčkem:
Details
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-09-20T08:48:34.000000000Z" />
<EventRecordID>36478</EventRecordID>
<Channel>Application</Channel>
<Computer>JIRKA-PC.sandster.local</Computer>
<Security />
</System>
- <EventData>
<Data>mstsc.exe</Data>
<Data>6.3.9600.16384</Data>
<Data>5215e2b5</Data>
<Data>ntdll.dll</Data>
<Data>6.3.9600.16384</Data>
<Data>5215f938</Data>
<Data>c0000005</Data>
<Data>000000000002de46</Data>
<Data>1ef8</Data>
<Data>01ceb5de1d230682</Data>
<Data>C:\Windows\System32\mstsc.exe</Data>
<Data>C:\WINDOWS\SYSTEM32\ntdll.dll</Data>
<Data>6e76e3a0-21d1-11e3-824d-005056c00008</Data>
<Data />
<Data />
</EventData>
</Event>
Windows Error Reporting (ID: 1001)
=======================
General
Chybný blok 127057472, typ 4
Název události: APPCRASH
Reakce: Není k dispozici.
ID souboru CAB: 0
Podpis problému:
P1: mstsc.exe
P2: 6.3.9600.16384
P3: 5215e2b5
P4: ntdll.dll
P5: 6.3.9600.16384
P6: 5215f938
P7: c0000005
P8: 000000000002de46
P9:
P10:
Připojené soubory:
C:\Users\Jirka.SANDSTER\AppData\Local\Temp\WER3B11.tmp.WERInternalMetadata.xml
C:\Users\Jirka.SANDSTER\AppData\Local\Temp\WER440B.tmp.appcompat.txt
Tyto soubory mohou být k dispozici zde:
C:\Users\Jirka.SANDSTER\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_mstsc.exe_b612095447011e21536732396929f9b226636_4012f314_1494441a
Symbol analýzy:
Opětovné hledání řešení: 0
ID hlášení: 6e76e3a0-21d1-11e3-824d-005056c00008
Stav hlášení: 1
Zakódovaný interval: 9db086049b946847d22aeaa96b0e9f58
Details
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-09-20T08:48:37.000000000Z" />
<EventRecordID>36479</EventRecordID>
<Channel>Application</Channel>
<Computer>JIRKA-PC.sandster.local</Computer>
<Security />
</System>
- <EventData>
<Data>127057472</Data>
<Data>4</Data>
<Data>APPCRASH</Data>
<Data>Není k dispozici.</Data>
<Data>0</Data>
<Data>mstsc.exe</Data>
<Data>6.3.9600.16384</Data>
<Data>5215e2b5</Data>
<Data>ntdll.dll</Data>
<Data>6.3.9600.16384</Data>
<Data>5215f938</Data>
<Data>c0000005</Data>
<Data>000000000002de46</Data>
<Data />
<Data />
<Data>C:\Users\Jirka.SANDSTER\AppData\Local\Temp\WER3B11.tmp.WERInternalMetadata.xml C:\Users\Jirka.SANDSTER\AppData\Local\Temp\WER440B.tmp.appcompat.txt</Data>
<Data>C:\Users\Jirka.SANDSTER\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_mstsc.exe_b612095447011e21536732396929f9b226636_4012f314_1494441a</Data>
<Data />
<Data>0</Data>
<Data>6e76e3a0-21d1-11e3-824d-005056c00008</Data>
<Data>1</Data>
<Data>9db086049b946847d22aeaa96b0e9f58</Data>
</EventData>
</Event>
Could you help me please?
Thanks

Hi Jiří,
looks like a bad Audio codec (bdmpega64.acm) causes the crash:
* Exception Analysis *
*** WARNING: Unable to verify timestamp for bdmpega64.acm
*** ERROR: Module load completed but symbols could not be loaded for bdmpega64.acm
APPLICATION_VERIFIER_HEAPS_CORRUPTED_HEAP_BLOCK_EXCEPTION_RAISED_FOR_PROBING (c)
Exception raised while verifying the heap block.
This situation happens if we really cannot determine any particular
type of corruption for the block. For instance you will get this if
during a heap free operation you pass an address that points to a
non-accessible memory area.
This can also happen for double free situations if we do not find the
block among full page heap blocks and we probe it as a light page heap block.
Arguments:
Arg1: 000000aa6c971000, Heap handle used in the call.
Arg2: 000000005d0b4440, Heap block involved in the operation.
Arg3: 0000000000000000, Size of the heap block.
Arg4: 00000000c0000005, Reserved.
FAULTING_IP:
verifier!VerifierStopMessage+28a
00007ffd`f922a43a cc int 3
EXCEPTION_RECORD: ffffffffffffffff -- (.exr 0xffffffffffffffff)
ExceptionAddress: 00007ffdf922a43a (verifier!VerifierStopMessage+0x000000000000028a)
ExceptionCode: 80000003 (Break instruction exception)
ExceptionFlags: 00000000
NumberParameters: 1
Parameter[0]: 0000000000000000
CONTEXT: 0000000000000000 -- (.cxr 0x0;r)
rax=000000aa5cfc0000 rbx=0000000000000000 rcx=000000aa5cfc0000
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=00007ffe08bc808a rsp=000000aa5e83cb08 rbp=000000aa5e83d950
r8=0000000000001000 r9=0000000000000000 r10=0000000000000040
r11=0000000000000286 r12=0000000000000000 r13=0000000000000000
r14=000000aa5cfb0000 r15=0000000000000000
iopl=0 nv up ei pl nz na pe cy
cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00000203
ntdll!NtWaitForMultipleObjects+0xa:
00007ffe`08bc808a c3 ret
DEFAULT_BUCKET_ID: STATUS_BREAKPOINT
PROCESS_NAME: mstsc.exe
ERROR_CODE: (NTSTATUS) 0x80000003 - {AUSNAHME} Haltepunkt Im Quellprogramm wurde ein Haltepunkt erreicht.
EXCEPTION_CODE: (HRESULT) 0x80000003 (2147483651) - Mindestens ein Argument ist ung ltig.
EXCEPTION_PARAMETER1: 0000000000000000
NTGLOBALFLAG: 2000100
APPLICATION_VERIFIER_FLAGS: 48004
APP: mstsc.exe
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
FAULTING_THREAD: 0000000000001630
PRIMARY_PROBLEM_CLASS: STATUS_BREAKPOINT
BUGCHECK_STR: APPLICATION_FAULT_STATUS_BREAKPOINT
LAST_CONTROL_TRANSFER: from 00007ffdf92292e4 to 00007ffdf922a43a
STACK_TEXT:
ntdll!NtWaitForMultipleObjects
ntdll!RtlReportExceptionEx
ntdll!RtlReportException
verifier!AVrfpVectoredExceptionHandler
ntdll!RtlpCallVectoredHandlers
ntdll!RtlDispatchException
ntdll!KiUserExceptionDispatch
verifier!VerifierStopMessage
verifier!AVrfpDphReportCorruptedBlock
verifier!AVrfpDphCheckNormalHeapBlock$filt$0
ntdll!_C_specific_handler
ntdll!RtlpExecuteHandlerForException
ntdll!RtlDispatchException
ntdll!KiUserExceptionDispatch
verifier!AVrfpDphFindBusyMemoryNoCheck
verifier!AVrfpDphFindBusyMemory
verifier!VerifierCheckPageHeapAllocation
verifier!AVrfpHeapFree
bdmpega64
0x0
0x0
0x0
IMAGE_NAME: bdmpega64.acm
FAILURE_BUCKET_ID: STATUS_BREAKPOINT_80000003_bdmpega64.acm!Unknown
Loaded symbol image file: bdmpega64.acm
Image path: C:\Windows\System32\bdmpega64.acm
Image name: bdmpega64.acm
Timestamp: Thu Aug 09 09:40:14 2012
From what I can see the file bdmpega64.acm belongs to a tool called http://www.bandicam.com
Update the tool to the latest version 1.9.0.397:
http://www.bandicam.com/downloads/
If this doesn't fix it, remove it or disable Audio in the RDP options.
"A programmer is just a tool which converts caffeine into code"

VERY URGENT:Upgrade To Netweavers From 3.0B version

HI ALL,
We are currently planning to Upgrade TO SAP Netweavers 2004 (BI).Our Current version is 3.0B.Now We are planning about the preupgrade Activities.As far as the upgrade plan is concerned ,Our client is currently only concerned about Technical upgrade and the rest about using the new technology will be planned later while we finish the technical upgrade.I have already gone through various Links in SDN .But ,I have certain Questions ,So i would like to have specific answers from you.Also ,I want to know about the sizing requirements.?
1.1 what space SAP says is required to do Minimize Downtime
1.2) cpu & memory
2) Add requirements such as GUI ---Netweaver GUI???
3)What is the minimum support pack level that should be applied before we upgrade to Sap Netweavers and what is the latest support pack level?
4) what are the plugins that need to be installed?
5) what is meant by database upgrade (Database & SAP Kernel upgrade) and system upgrade and what do we need to do?
6)What is Regression testing?
7)what is meant by SPAU list review?
8) what do u mean by Prepare Run and what are the activities that are done in this phase and what are Pre Prepare Phase Activities?
9)What is external IGS server with v3.0B?
Please take some time out and help me in this regard.Points will be assigned.This is very urgent for me.
I also want to know ,approximately ,what is the time taken to complete the technical upgrade?
Regards,
Samir

can you give me personnel Mail Id..?
Hence i can send the document to you.
Regards
Saravanan.ar
Message was edited by:
Saravanan Raju

When my system upgrade from os x 10.9.4 to os x 10.10.1, the time of shot down in my system is very long rather than pervious os. my system is macbook pro 11.1

when my system upgrade from os x 10.9.4 to os x 10.10.1, the time of shot down in my system is very long rather than pervious os. my system is macbook pro 11.1.
please inform me about this problem

Jan 8 18:36:31 localhost kernel[0]: Previous shutdown cause: 5
Jan 8 18:37:06 Jashan-Mr-2.local shutdown[927]: reboot by apll:
Jan 8 18:37:06 Jashan-Mr-2.local shutdown[927]: SHUTDOWN_TIME: 1420729626 658562
Jan 8 18:39:44 localhost com.apple.xpc.launchd[1] (com.parallels.desktop.launchdaemon): Service has increased maximum shutdown time to 150 seconds. This will create a poor experience for the user.
Jan 8 18:39:45 localhost kernel[0]: Previous shutdown cause: 5
Jan 8 19:02:58 Jashan-Mr-2.local shutdown[1286]: halt by apll:
Jan 8 19:02:58 Jashan-Mr-2.local shutdown[1286]: SHUTDOWN_TIME: 1420731178 850680
Jan 8 19:02:58 Jashan-Mr-2 com.apple.xpc.launchd[1] (com.apple.xpc.launchd.domain.system): System reboot initiated by: shutdown.1286<-sessionlogoutd.1285<-launchd.1
Jan 8 19:13:09 Jashan-Mr-2 kernel[0]: Previous shutdown cause: 5
Jan 8 20:11:44 Jashan-Mr-2.local shutdown[1927]: halt by apll:
Jan 8 20:11:44 Jashan-Mr-2.local shutdown[1927]: SHUTDOWN_TIME: 1420735304 825738
Jan 8 20:11:44 Jashan-Mr-2 com.apple.xpc.launchd[1] (com.apple.xpc.launchd.domain.system): System reboot initiated by: shutdown.1927<-sessionlogoutd.1926<-launchd.1
Jan 9 12:06:41 localhost com.apple.xpc.launchd[1] (com.parallels.desktop.launchdaemon): Service has increased maximum shutdown time to 150 seconds. This will create a poor experience for the user.
Jan 9 12:06:41 Jashan-Mr-2 kernel[0]: Previous shutdown cause: 5
Jan 9 12:25:15 Jashan-Mr-2.local shutdown[1868]: halt by apll:
Jan 9 12:25:15 Jashan-Mr-2.local shutdown[1868]: SHUTDOWN_TIME: 1420793715 291375
Jan 9 12:25:15 Jashan-Mr-2 com.apple.xpc.launchd[1] (com.apple.xpc.launchd.domain.system): System reboot initiated by: shutdown.1868<-sessionlogoutd.1867<-launchd.1
Jan 9 12:28:47 localhost com.apple.xpc.launchd[1] (com.parallels.desktop.launchdaemon): Service has increased maximum shutdown time to 150 seconds. This will create a poor experience for the user.
Jan 9 12:28:48 Jashan-Mr-2 kernel[0]: Previous shutdown cause: 5

Very slow encoding after upgrade from 5.03 to 5.5 with MXO2 mini

Hi all.
After upgrading from CS5.03 to 5.5 my encoding now takes 5 times as long. A 2 minute HD Video file would take 2 minutes, and still does on the PC I haven't upgraded (identical almost) but now with CS5.5 it takes almost 11 minutes.
Some explanation....
I create HD MJPEG files on a PC with Blackmagic Decklink.
I transfer these files to an HPz800 which used to run CS5.03 with Matrox Utils 5.1.1.37 and an MXO2 Mini with Max. (Nvidia Quadro fx4800 and 12GB of RAM)
On a Blackmagic timeline HD 1080i MJPEG with filters of Auto Color, Fast Color Corrector and Gamma correction a 2 minute timeline would encode in 2 minutes give or take a couple of seconds.
Now with CS5.5 and Mtx 5.5 an identical file takes 11 minutes to encode to Microsoft avi - Matrox 1920 x 1080i - 25fps.
If I remove the filters (which I need to be able to use) it will come down to 2 minutes as it used to be.....so it seems to be the filters are now slowing things down when they never used to. I have never rendered before exporting. Ever. So this time I tried rendering first and it brought the 11 minutes down to 7 minutes but when taking into account the 4 minutes rendering time I am no better off.
I have updated CS5.5 to CS 5.5.1 and MTX Utils to 5.5 and then 5.5.1 and it makes no difference. Still 11 minutes to decode 2 minutes with three filters, which is exactly what I have always been doing but now it doesn't work....
Can anybody help? or make a suggestion as to why using filters in 5.5 now multiplies the encode time by 5 when it never used to. Everything else bar Matrox Utils on this machine is as it was before the upgrade to 5.5 and as I say my older machine is still 5.03 it can do it all in 2 minutes even with the filters intact.
So have I really spent a small fortune upgrading to make my output 5 times slower. Not happy......

To go further, every single encode that I have done is slower than it was before with CS5.01 or 5.03.
This is odd because going from Blackmagic to any other codec doesn't necessarily need the Matrox box or Matrox utils
Blackmagic HD or SD to
Matrox HD
QT HD MP4
QT SD DV25
DV AVI SD
Mpeg2 - DVD
Every single encode is slow by 2x to 6x.
Why should Blackmagic HD to QT MOV MP4 take twice as long as it used to...... having said that The speeds I am seeing now are what it was like before I attached the box in the first place, whether a Matrox codec was involved or not.... It is acting like a blocked funnel. when it used to be a lovely wide and clear funnel.
Anyway Matrox have reproduced the problem and are investigating, so hopefully there will be an answer soon....

Is it really possible to upgrade from a Treo 650 to a Treo 750?

I am not a very happy customer at the moment, but any help would be greatly appreciated. I upgraded from my old Palm Tungsten to a Zire, then to a Cingular Treo 650, combining three devices into one. I have since discovered that the Treo 650 seems to have a faulty transmission mode, as I can rarely be clearly understood by whomever I call. Am on the second (or third, I have lost track) and continue to have the same problem. I get five bars of reception but can't be understood on the other end. A bit of a problem when one is trying to call 911. Am constantly told I am "breaking up". The repair shop says it "Can't duplicate the problem". OK, then I do not want to give up all the info I have stored in the fool thing, and the 750 seems to have a different system, so I thought I would try that. All the stuff I could find seemed to indicate it wouldn't be a problem to upgrade. When the 750 arrived, I tried to install the software from the CD on my Windows XP computer. No dice. Setup encounters an error and closes. Can't even look at the files, because setup tries to run any time I access the CD. From any drive. Gave it to my girlfiend to check on her computer, and the CD seemed to run fine. Other CDs work just fine on my computer. Must be some kind of conflict, but what? Tried calling the AT&T number that suggested they could help with setup, and was first connected to the business center, they routed me to the laptop center, who routed me to the network center, who said they would have to bring in the Palm customer service and connected me to a Mac guy that dumped me back to a menu that took me to someone for whom English is a second language with whom I was trying to communicate over a very poor satellite connection. They made no sense anyway. telling me first that I couldn't have two desktops running (wrong, my girlfriend has my old Zire and the CD worked fine) and then insisting that the serial number on my device had to start with a P, when it clearly does not have any alpha characters in it. Gave up on that route of assistance. Managed to get the new ActiveSync installed from my girlfriends computer over the network. Great. Now let's get my 650 synced with Outlook (which I have not used at home) and see if we can move on. Nope. First I have to update Outlook 2000 from the old Win98 to my current XP. Find the old CD, and square that away. OK, now sync to Outlook. Nope. The sync program gives an error, saying it will only sync with Outlook 98, 2000, and XP(2002). Good grief. I have Outlook 2000, and the software apparently does not recognize it. If the Palm doesn't work, there is no reason for me to keep this phone, and I am very close to returning it and abandoning the Palm entirely when I upgrade to something that works, although I dread re-entering all that information.
Post relates to: Treo 750 (AT&T)
This question was solved.
View Solution.

Thanks for the feedback. Today I installed an Enterprise version of Office 2007 I purchased a while back, but had not yet installed. Microsoft presented a few challenges, but they were quickly resolved. I then downloaded the appropriate conduit from Palm, and synced the 650 with the handheld overwriting the computer. Then used Active Destop to sync the 750. Satisfied I had moved as much info as possible, I called AT&T and had them move the phone number to the new Treo.
Bonus! When the guy at AT&T called me on the new phone to verify it, he said it sounded better than my landline.
Sorry for the streaming paragraph. When it is late I tend to write like I think.
Dave
Post relates to: Treo 750 (AT&T)

Does anyone know how to upgrade from 4.1 to 4.3 ios?

After being tricked by the fast talking smoothy helper at Apple store in London to buy a micky mouse ipodtouch (fourth generation) two years ago I am stuck at ios 4.1 and find that all the useful applications need 4.3 or more. So I went to the trouble of letting the macbook stay open all night to load yet another micky mouse version of itunes so that I can upload the more recent version of ios and now (since I don't want to continually have a lot of rubbish on the ipod I disabled the automatic sync "feature") I can only go round in circles whereby the only real possibility left is to turn on the autosync feature. I have had messages like "your ipod will be completely erased if you proceed" and "do you wish to fiddle another few days with this nasty system, then click on continue" and so on.
Does anyone know how to upgrade from 4.1 to 4.3 ios?
That would be great (maybe) because otherwise I will toss this children's waste product on the floor and set up my HD camera to show how easy it is to smash the brightly lit screen into pieces and relieve myself of trash which Apple sell to unsuspecting gullible humans who believe that they are not being tricked by such a nice company who produce shiny colourful gadgets which only work for a month or two before becoming 100% obsolete.
Great to hear from those who have wasted many months of their lives and discovered how to trick the system into doing a simple update operation!
I am insulted by the tricks that fool many and that apple pretend are "necessary".
Germany 2014 01 11 16 19 27

Illaass, your help is amazing - miles better than anyone working in this part of the world who is paid - and you do this for free - because, like me, you LOVE to help people!
BUT, as I said above -
1. There is nothing "mobile" under Application Support. For whatever reason.
2. Devious - that Apple has set up iPod to not show in Finder - a red herring and sign that corruption is visible.
I will try iFunBox next and it sounds like they provide this for the more serious users but use a trivial name to excuse further strangeness.
After
There are purchased items on the iPod that have not been transferred to your iTunes library. You should transfer these items to your iTunes library before updating the iPod. Are you sure you want to continue?
I get
Updating to iOS 6.1.5 will backup and restore the apps, media, contacts, notes, and settings on your iPod touch.
Please do not interrupt the update, which may take an hour or longer to complete.
Cancel          Update
And then I wait for hours to arrive at the above mentioned
Backing up iPod   \\\\\\\\\\\\\\\\\\\\\\\\\ Stop
and then as above
An error occurred while backing up this iPod (0xE8000084). Would you like to continue to update this iPod?
Continuing will result in the loss of all contents on this iPod.
Cancel                Continue
and so we are back to where we always land - the user is left in the Apple designed sabotage situation which annoyed me so much initially.
"Most users will give up at this point, loose all the data or buy yet another disposable from Apple. Less than 3% will work their way to this site and 90% of the 3% will leave the iPod to gather dust in the hope that someone will help later. In all, Apple gains, since people blame themselves for "mistakes" which Apple programmed to throw out users who do not take the 100% Apple path. But Illaass and myself still play the game of "trying to fix" something which Apple don't allow." was the comment which I was going to write but decided against it, adding no value to the conversation other than explaining one reality which we all hoped could be wrong but which I thought to have a very high chance of being closer to the truth.
Apologies for my doubts towards the integrity of the creators.
2014 01 13 12 11 58 17
Recheck: Under Application Support "mobilesync" folder has appeared (MobileMeSyncClient has also appeared [while again trying to update iPod] with zero size) - Good news, a Backup file is there, but it is only 3GB while my iPod has 32GB and is close to full (800MB free space).
Latest at
2014 01 13 12 09 22
The iPod could not be restored. An unknown error occurred (9).
More Infomation    OK
So it looks like I may have lost all the important pictures documenting various items all around Europe for the last two years - luckily I moved a year ago from the iPod toy camera to a Panasonic real camera with SD card which can be read on any computer. Hence important items lost may only be older than one year rather than the most recent items.
Glad I have changed to Panasonic since they don't try to screw you when you don't use their system.
I will now check the "more information" rather than just click on "OK" since I am of the 3% who "don't accept cr*p".
For full information I quote that the iPod now shows a screen with a USB ikon, an upward arrow and an iTunes ikon (all micky mouse language which reduces transparant, clear and technical discussion and thus covers the trail of "where things went wrong").
The iPod is still attached to the computer but the above MMTALK may mean that the iPod should be attached via USB to the mac. I record much of this activity on Video to be able to later prove EXACTLY what occurred, rather than having to rely on screenshots and opinions. We are after all dealing with important items which may later be required to be shown in court, as evidence against fraudsters.
The "More Information" link leads to
Resolve iOS update and restore errors in iTunes
which I have already seen before.
I clicked on OK and a help screen (unnamed as ever because no one like myself demanded that the help screens be named for later discussion) arrived:
You can help Apple improve its products a
while copying this into this message the computer began to start up Final Cut Pro and this was cancelled, then iTunes came up with a message:
iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes.
ok
And I presume the earlier message about helping Apple is gone because I keep getting interrupted by this message called
iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes.
ok
it has appeared now at least six times interferring with anything else I do. Each time I try to write, this message appears and blocks, but only when I write. I tried to do a carriage return and the message appeared taking the carriage return as acceptance of the OK in the
iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes.
ok
Message. But since I have not removed the USB and keep returning to this message I am able to write for a few seconds (now 30 seconds or more) and the message remains on the screen but not blocking this conversation. It appears to be random but in fact as you can later see from the video, it is not reappearing each periodic number of seconds but as I reach a new comment.
I will try to close iTunes so that this can be stopped (I clicked on OK and it appeared another few times, each time I clicked on ok and now it has left me in peace to write here although iTunes is still not yet closed).
Difficult to log down all the strange behaviour but I think you can get the gist of what is going on.
2014 01 12 12 49 27
Should I remove the iPod and stop iTunes? I have a nasty feeling turning to indifference since I have video footage which will verify all the above in a court of law if later required. The truth must always win over any devious attempts at forcing people to do things they don't want to ;-)
2014 01 13 13 03 48

Issues faced in MDM 7.1 SP07 upgrade from SP05

Dear Experts,
We have a requirement to upgrade the SAP MDM 7.1 SP05 to SP07.
For this Could you all please list out the various issues, which could be faced in doing this upgrade and what could be the Possible Solutions for these issues.
And if anyone has done the upgrade from SAP MDM 7.1 SP05 to SP07, then Please share you experience for the same related to the issues faced and any other relevan tinformation which could be helpful.
Thanks in advance for the valuable inputs.
Regards
Gaurav Kumar Sharma

Read this SAP Note - Note 1487853 - SAP NetWeaver MDM 7.1 SP07 Release
or refer the link
http://help.sap.com/saphelp_mdm71/helpdata/en/4d/885f32b97d14aee10000000a42189c/content.htm
Similaryly read for SP06 fixes at - http://help.sap.com/saphelp_mdm71/helpdata/en/be/e0048b426b4c20957078b61ec71e46/content.htm
These links gives you an idea of what all changes are going to come into your new system. So unless you upgrade to SP07 i.e. the latest version and test it in DEV/Sandbox environment you should not plan to move ahead in Production. This is always recommended but there is very less chance that the already working solution will not work as expected after the upgrade.
Thanks,
Shambhu.

Upgrade from 11i to r12 application servers with Discoverer 10g

Hello, one and all.
I have recently upgraded from 11i to r12 Oracle financial application server, after much patching and testing we finally came to the Discoverer application server.
Most workbooks open fine, however it seems that some of them (about 3%) reference columns that no longer exist in r12, for example, SET_Of_BOOKS_ID has become LEDGER_ID in r12 on the gl.gl_je_lines table.
This causes any workbook that references that business area to return an error 'Database Error - ORA-00904: " O974567"."SET_OF_BOOKS_ID": invalid identifier.
Well and good; I think that that's caused by the EUL not being refreshed after the upgrade, so I go to the Discoverer administrator and refresh the general ledger Business area. This unfortunately renames several objects inside the business area, including SET_OF_BOOKS_ID to LEDGER_ID, so instead of that error, we now get several 'Missing item or condition' errors until the workbook will not open at all with an 'Item dependency "" not found in the EUL.' error. This i assume is because the workbooks still reference the old items.
I'm guessing that several Business areas and objects therein have been renamed since nearly none of the workbooks will open now. I have restored the EUL from a backup (imported all the *.eex files) however I was wondering if anyone had faced this issue.
I apologize as I have very little understanding of Discoverer and this might be a simple fix, but I'm at this point willing to try anything for help.
Thanks!

user8612301 wrote:
Hi Srini
Srini,
To understand your above reply,
You say that
1) If they are based on 11i Discoverer EUL and Folders then export EUL And WorkBooks and Import them
into R12 Discoverer Environment..Refresh the EUL..So ORACLE will take care of the changes like 11i SOB vs R12 Ledegrs??Pl open a SR with Support on what to do with seeded EUL as part of this upgrade - I suspect you will need to import the R12 EUL as part of this upgrade.
>
2) If they are Custom SQL reports from 11i then just RECREATE them from SCRATCH..Correct - after you verify that they are changed to reflect the R12 data model
>
Am I right?
thanks
kp
Edited by: user8612301 on Apr 20, 2011 8:57 AMSrini

After Upgrade from 11.1.1.3 to 11.1.2.2 Essbase Application Not Shown in Calculation Manager

I have upgraded from EPM 11.1.1.3 to 11.1.2.2 and now want to import Business Rules to Calculation Manager for use with Essbase.
However I cannot see my Essbase Application in Calculation Manager; (only the provided sample applications are shown in the hierarchy)
How do I check my configuration? How does Calculation Manager connect to Essbase and find my app?
I haven't knowingly altered Essbase server/port details during the upgrade as I opted not to re-host.

Yes the EAS schema was upgraded by the configurator.
I ran upgrade_ps2.sh (unix) without changing any configuration just to see what it does and (after I had to manually create the directory structure for the log file) it created an HBRrules.xml file successfully fo the first time under EPMData/planning (The missing log file directory structure may have been why the configurator didn't create the HBrrules.xml file at the first attempt during the Planning upgrade)
Anyway not entirely sure where upgrade_ps2.sh got its rules information but the file it created was very similar to the HBR file exported from EAS prior to starting the upgrade.
I attempted a 'migrate' again with Calculation Manager but still get the "No objects were found in the document for importing", i.e. kind of back to square one.
I really need to understand what is Calc Managers problem?
Q .What server should the upgrade_ps2.sh be run on? Planning or Shared Services? (I did it in on both)
Q. How can I get Calc Manager to tell me more with logging or tracing somehow?
Any other suggestions gratefully received
Many Thanks

Interview questions on upgrades from 4.7 to ECC

Hi,
Can any one please post some potential areas/questions that will be asked for upgrade projects from 4.7 to ECC6.0
Points will be awarded.
Thanks

Hi Frank,
this is good question, why because sap upgrades from 4.6b to ecc 6.0 is very risky.
take one example , in 4.5b , me21n application having 620 screen where as in ecc 6.0 having 9000 screen . that time we will take care of it.
check the obsolete function modules , 4.5b , having ws_upload, ws_download.... use cl_gui_frontend_services , under these having differnt type of methods.
once you change the code in ecc , go to tranx : SLIN check the error where it is exact.

Help! I recently upgraded from Leopard (10.5.8) to Snow Leopard (10.6.8) and now my iTunes won't open!

So I upgraded from Leopard to Snow Leopard. And at first, never received the option to like, carry stuff over from a back up. So I went to the Apple Store and they fixed that, and it looked like everything was fine and dandy and my content was there. I get home, and try to open iTunes and now am receiving this message: The file “iTunes Library.itl” cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?
I click yes, but there are no updates/downloads of iTunes available, so nothing happens, it just says no updates at this time. I am very nervous about losing my library as I've collected a lot of songs and meticulously organized them over the past five years. How can I get iTunes to open? And without doing anything to lose my library? Please help, I'm super stressed and freaking out.

Download iTunes from Apple's web site and install it. Don't use Software Update.

VERY UREGENT:UPGRADATION FROM BW 3.0B TO SAP NETWEAVERS

Similar Messages

Maybe you are looking for