Very Urgent..How to create a report Using SQ01 and Sq02.

Hi Friends,
It's very urgent.pl help me in generating a report using SQ01 and SQ02.
Help is appreciated.
thanks In advance.
Regards,
Nanditha.

Check out these links...
http://www.insightcp.com/res_15.htm
http://www.ams.utoronto.ca/Assets/output/assets/adhoc_2990830.pdf.pdf
Also, do basic search in this forum...you will find a lot of threads related to this.
SKR

Similar Messages

How to create interactive report in SQ01

HAI EVERY ONE,
Can any one help me,
how to create interactive report using SQ01,SQ02,SQ03.
Plz explain me in details. I dont want simple report. I want to generate interactive report using SQ01. Is it possible how?
I will give u good points if it is useful.
Thanks and Regards,
V.Vamsi

Hai,
When u create simple report using sq01 it display basiclist,Rankedlist,statistics,output sequence.
When u will use this options. That why i am asking. Actually basic list means simple report.
What about rankedlist,Statistics and outputsequence. Plz explain these things.
Thanks and Regards,
V.Vamsi

How to create crystal reports using MSDE 2000?

Post Author: S_Muhilan
CA Forum: Deployment
Hi,
I am using Crystal report 8.5. My Database sqlserver 2000. I generated reports and are working fine.
Now I want to use MSDE 2000 instead of Sqlserver 2000 due to license factor.
My application is developed in VB 6. The all the parts of the application is working fine except the report.
All reports produced Database DLL error.
So I opened the report and try to verify the database. But it gives pdssql.dll not found. Database error.
After this error, I tried to create a new report and found that there is no option for MSDE 2000 database selection under more database.
I usually select Sql server 2000 database under More Database option of location wizard.
How to create crystal reports using MSDE 2000?
Is it due to crystal report 8.5 verison problem? I also have crystal report 11 licensed copy.
Please give me the good solution as early as possible
RegardsS. Muhilan

To use the inproc RAS SDK with CR.NET, you'd have to purchase either (1) Crystal Reports XI Release 2 Developer edition, and apply Service Pack 2 or above, or (2) Crystal Reports 2008 (not Crystal Reports Basic that comes with Visual Studio 2008).
Sincerely,
Ted Ueda

How to create a report using XML data source from Crystal Report Designer

Hi,
Iu2019m having Crystal Report Designer XI R2 SP4. Iu2019m trying to create a report using XML data source stored on disk. This is a customer order report and the xml is structured in such a way that it has an order details header part (master) and then it has several order lines (detail). One order line can have several order line characteristics (detail-detail). So what I need to know is now I can design this layout from the designer. If this was done using views I can do it with sub-reports but using xml data this seems to be different. Can you help me to design this layout? I have included the xml and xsd as well.
Thank you in advance.
Regards,
Chanaka
XML
<?xml version="1.0" encoding="UTF-8"?>
<CUSTOMER_ORDER_CONF_REP_REQUEST xmlns:xsi="http://www.w3.org/2001/XMLSchema" xmlns="urn:ifsworld-com:customer_order_conf_rep">
    <CUSTOMER_ORDER_CONF_REP>
        <ORDER_NO>D555809</ORDER_NO>
        <PRINTED_DATE>2009-03-26T08:52:54</PRINTED_DATE>
        <AUTHORIZE_NAME>Chanaka</AUTHORIZE_NAME>
        <CUSTOMER_NO>CU-1473-INV</CUSTOMER_NO>
        <CUST_NAME>Mr.Johan Matts</CUST_NAME>
        <SHIP_ADDR_1>93,Main Street</SHIP_ADDR_1>
        <SHIP_ADDR_2>Negambo Road</SHIP_ADDR_2>
        <SHIP_ADDR_3>Watthala</SHIP_ADDR_3>
        <SHIP_ADDR_4>SRI LANKA</SHIP_ADDR_4>
        <BILL_ADDR_1>93,Main Street</BILL_ADDR_1>
        <BILL_ADDR_2>Negambo Road</BILL_ADDR_2>
        <BILL_ADDR_3>Watthala</BILL_ADDR_3>
        <BILL_ADDR_4>SRI LANKA</BILL_ADDR_4>
        <CUSTOMER_PO_NO>112984638</CUSTOMER_PO_NO>
        <CUSTOMER_FAX>112984639</CUSTOMER_FAX>
        <CUSTOMER_EMAIL>abcbababab</CUSTOMER_EMAIL>
        <ORDER_LINES>
            <ORDER_LINE>
                <LINE_NO>1</LINE_NO>
                <CUSTOMER_PART_NO>NW-IP11</CUSTOMER_PART_NO>
                <CUSTOMER_PART_DESC>iPod</CUSTOMER_PART_DESC>
                <SALE_UNIT_PRICE>1200</SALE_UNIT_PRICE>
                <PRICE_TOTAL>1200</PRICE_TOTAL>
                <DISCOUNT>0</DISCOUNT>
                <PRICE_QTY>1</PRICE_QTY>
                <ORDER_LINE_CHARACTERSTICS>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID xsi:nil="1"/>
                        <CHARACTERISTIC_VALUE xsi:nil="1"/>
                    </CHARACTERISTIC_ITEM>
                </ORDER_LINE_CHARACTERSTICS>
            </ORDER_LINE>
            <ORDER_LINE>
                <LINE_NO>2</LINE_NO>
                <CUSTOMER_PART_NO>NW-IP24</CUSTOMER_PART_NO>
                <CUSTOMER_PART_DESC>XGA Projector</CUSTOMER_PART_DESC>
                <SALE_UNIT_PRICE>500</SALE_UNIT_PRICE>
                <PRICE_TOTAL>1500</PRICE_TOTAL>
                <DISCOUNT>0</DISCOUNT>
                <PRICE_QTY>3</PRICE_QTY>
                <ORDER_LINE_CHARACTERSTICS>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>Free Instalation</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                </ORDER_LINE_CHARACTERSTICS>
            </ORDER_LINE>
            <ORDER_LINE>
                <LINE_NO>3</LINE_NO>
                <CUSTOMER_PART_NO>NW-IP02</CUSTOMER_PART_NO>
                <CUSTOMER_PART_DESC>Sony DVD Player</CUSTOMER_PART_DESC>
                <SALE_UNIT_PRICE>1000</SALE_UNIT_PRICE>
                <PRICE_TOTAL>1000</PRICE_TOTAL>
                <DISCOUNT>0</DISCOUNT>
                <PRICE_QTY>1</PRICE_QTY>
                <ORDER_LINE_CHARACTERSTICS>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>Free 5 DVDs</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                </ORDER_LINE_CHARACTERSTICS>
            </ORDER_LINE>
            <ORDER_LINE>
                <LINE_NO>4</LINE_NO>
                <CUSTOMER_PART_NO>NW-IP99</CUSTOMER_PART_NO>
                <CUSTOMER_PART_DESC>Flatscreen TV</CUSTOMER_PART_DESC>
                <SALE_UNIT_PRICE>1500</SALE_UNIT_PRICE>
                <PRICE_TOTAL>1350</PRICE_TOTAL>
                <DISCOUNT>10</DISCOUNT>
                <PRICE_QTY>1</PRICE_QTY>
                <ORDER_LINE_CHARACTERSTICS>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>Free Delivery</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>2</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>1 year additional warranty</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                </ORDER_LINE_CHARACTERSTICS>
            </ORDER_LINE>
            <ORDER_LINE>
                <LINE_NO>5</LINE_NO>
                <CUSTOMER_PART_NO>NW-IP56</CUSTOMER_PART_NO>
                <CUSTOMER_PART_DESC>Sony MP3 Player</CUSTOMER_PART_DESC>
                <SALE_UNIT_PRICE>200</SALE_UNIT_PRICE>
                <PRICE_TOTAL>400</PRICE_TOTAL>
                <DISCOUNT>0</DISCOUNT>
                <PRICE_QTY>2</PRICE_QTY>
                <ORDER_LINE_CHARACTERSTICS>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>Free carry belt</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>2</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>Free promotional 4GB memory bar</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>3</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>No warranty on memory bar</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                </ORDER_LINE_CHARACTERSTICS>
            </ORDER_LINE>
        </ORDER_LINES>
    </CUSTOMER_ORDER_CONF_REP>
</CUSTOMER_ORDER_CONF_REP_REQUEST>
XSD
<?xml version="1.0" encoding="UTF-8"?>
<?report module="ORDER" package="CUSTOMER_ORDER_CONF_REP" ?>
<xs:schema targetNamespace="urn:ifsworld-com:customer_order_conf_rep" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="urn:ifsworld-com:customer_order_conf_rep" elementFormDefault="qualified" attributeFormDefault="unqualified">
<xs:element name="CUSTOMER_ORDER_CONF_REP_REQUEST">
<xs:complexType>
<xs:all minOccurs="1" maxOccurs="1">
<xs:element name="CUSTOMER_ORDER_CONF_REP">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="50">
<xs:element name="ORDER_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="PRINTED_DATE" type="xs:dateTime" nillable="true" minOccurs="0"/>
<xs:element name="AUTHORIZE_NAME" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_PO_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUST_NAME" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_1" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_2" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_3" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_4" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_1" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_2" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_3" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_4" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_FAX" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_EMAIL" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="ORDER_LINES" nillable="true" minOccurs="0">
<xs:complexType>
<xs:sequence minOccurs="0" maxOccurs="unbounded">
<xs:element name="ORDER_LINE">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="39">
<xs:element name="LINE_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SALE_UNIT_PRICE" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="PRICE_TOTAL" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="DISCOUNT" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="PRICE_QTY" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="CUSTOMER_PART_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="4000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_PART_DESC" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="4000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="ORDER_LINE_CHARACTERSTICS" nillable="true" minOccurs="0">
<xs:complexType>
<xs:sequence minOccurs="0" maxOccurs="unbounded">
<xs:element name="CHARACTERISTIC_ITEM">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="6">
<xs:element name="CHARACTERISTIC_ID" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CHARACTERISTIC_VALUE" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:all>
</xs:complexType>
</xs:element>
</xs:schema>

Hi Sourashree,
Thank you for the response and ideas you have given me so far. I can get the fetch the data from the data source without any problem. That is I do the following,
1.     New Report
2.     From Create New Connection-> XML
3.     Provide the u201CLocal XML Fileu201D and have u201CSpecify Schema Fileu201D checked -> Next
4.     Provide the u201CLocal Schema Fileu201D -> Finish
Then I can see the following under XML
+ CUSTOMER_ORDER_CONF_REP_REQUEST
        CUSTOMER_ORDER_CONF_REP_REQUEST
     CUSTOMER_ORDER_CONF_REP_REQUEST/CUSTOMER_ORDER_CONF_REP
     CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES
     CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE
     CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS
     CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS/CHARACTERSTIC_ITEM
And from here if I add the following three I can get all the fields I need to the report
     CUSTOMER_ORDER_CONF_REP_REQUEST/CUSTOMER_ORDER_CONF_REP
     CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE
     CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS/CHARACTERSTIC_ITEM
Then I come to the Linking section. Here I canu2019t link anything. There is a common field called u201CInternal_IDu201D but I canu2019t link using it. So I get a message when I click Next. From here I add all the fields.
For this point onwards only I need help. How do I group, add fields and design the layout so I can get an report output as follows.
Date
Order number                                   Authorized code
Customer No
Name
Phone
Fax email
Shipping address 1                              Billing Address 1
Shipping address 2                              Billing Address 2
Shipping address 3                              Billing Address 3
Shipping address 4                              Billing Address 4
Order Line 1 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026                      LINE_NO     CUSTOMER_PART_NO          CUSTOMER_PART_DESC     SALE_UNIT_PRICE     PRICE_QTY     DISCOUNT     PRICE_TOTAL
Characteristic details belonging to Order line 1       CHARACTERISTIC_ID 1 CHARACTERISTIC_VALUE1
                                       CHARACTERISTIC_ID 2 CHARACTERISTIC_VALUE2
                                       CHARACTERISTIC_ID 3 CHARACTERISTIC_VALUE3
Order Line 2 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 2
Order Line 3 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 3
Order Line 4 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 4
Order Line 5 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 5
How can I achieve this kind of a layout using the give xml and xsd? Should I use grouping if so how should I do the grouping?
I have included the full xml and xsd in the first mail I posted but I canu2019t see it now. I can include that again if you want.
Regards,
Chanaka

How to create a user using XML and specifying addional attributes that are objects

I'm trying to create a user using XML and specifying some attributes that are objects and not sure how to do it. How would I set the DirectoryUserAcl to Public?
Here's the xml file:
<?xml version = '1.0' standalone = 'yes'?>
<SimpleUser>
<UserName>mike2</UserName>
<Password>abc123</Password>
<AdminEnabled>false</AdminEnabled>
<HomeFolderRoot>/home</HomeFolderRoot>
<HasContentQuota>false</HasContentQuota>
<DirectoryUserAcl> ??? </DirectoryUserAcl>
<DefaultAclBundleAcl> ??? </DefaultAclBundleAcl>
<HomeFolderPolicyBundleAcl> ??? </HomeFolderPolicyBundleAcl>
</SimpleUser>

I figured out the answer:
<?xml version = '1.0' standalone = 'yes'?>
<SimpleUser>
<UserName>mike2</UserName>
<Password>abc123</Password>
<AdminEnabled>false</AdminEnabled>
<HomeFolderRoot>/home</HomeFolderRoot>
<HasContentQuota>false</HasContentQuota>
<DirectoryUserAcl classname="SystemAccessControlList" refType="name">Public</DirectoryUserAcl>
</SimpleUser>
null

How to creating pdf documents using c# and Adobe SDK

I downloaded Adobe SDK and go through the samples given in sdk. But i couldn't find any sample code how to create PDF file using C# code.
Please, help me with this.
Thanks.

For desktop-based solutions, look at the Adobe Acrobat SDK which enables development around Acrobat itself. Or if you wish a stand-alone solution (for either desktop or server), we offer the Adobe PDFLibrary, which is the same technology used by all of Adobe's applications.
For the server, we have our LiveCycle products including LC Generator.
Leonard

How to create crystal reports using servlets/jsp

plase any body help me how to create and interact with crystal reports using java

To use the inproc RAS SDK with CR.NET, you'd have to purchase either (1) Crystal Reports XI Release 2 Developer edition, and apply Service Pack 2 or above, or (2) Crystal Reports 2008 (not Crystal Reports Basic that comes with Visual Studio 2008).
Sincerely,
Ted Ueda

How to create an InputSelect using ADF and JSP

I looking for some docs/instructions on creating "an InputSelect using ADF with JSP".
Thanks,
BG...

Ok here are the Steps
1) Open the JSP editor for the page in Question.
2) In the Data Control palette select the item that you want to become the poplist and change the "Drop As" poplist to "Single Select List"
3) Drag the field into the page. You'll get an empty poplist which implements the <html:select> and <html:optionsCollection> tags.
4) With the JSP editor still open click on the "UI Model" sub-tab in the Structure pane
5) Select the field you've just dragged in - then right click to get the context menu and choose "edit"
6) Change the List Binding Mode poplist to "LOV Mode"
You're then taken into a couple of screens where you can select the Source VO for the poplist, and the destination dataset, along with the thing you want for the Label and the Value.

How to create store procedure using cursor, and looping condition with exce

Hi,
I am new in pl/sql development , please help me for follwoing
1. I have select query by joining few tables which returns lets say 100 records.
2. I want to insert records into another table(lets say table name is tbl_sale).
3. If first record is inserted into tbl_sale,and for next record if value is same as first then update into tbl_sale else
insert new row
4. I want to achieve this using store procedure.
Please help me how to do looping,how to use cursor and all other necessary thing to achieve this.

DECLARE
   b   NUMBER;
BEGIN
   UPDATE tbl_sale
      SET a = b
    WHERE a = 1;
   IF SQL%ROWCOUNT = 0
   THEN
      INSERT INTO tbl_sale
                  (a
           VALUES (b
   END IF;
END;note : handle exceptions where ever needed
Regards,
friend
Edited by: most wanted!!!! on Mar 18, 2013 12:06 AM

Urgent:HOW TO CREATE A PROGRAMME WITH MENUS AND MENUITEMS IN AWT?

hi am new to java..............and i know very less about java
can anyone help me by sending the code for creating menu with file,edit ,view and menuitems as open,save,exit.
and also plss help me how to get a filedialog box in the same programme when i click the open in filemenu.
in AWT.....................plsss urgent

sangi wrote:
hi am new to java..............and i know very less about javaredundant and barely intelligible
can anyone help me by sending the code for creating menu with file,edit ,view and menuitems as open,save,exit.have you tried a Swing demo? aside from the fact that this code has likely been written and published hundreds of times on the web, a simple tutorial would have shown you how to do this.
and also plss help me how to get a filedialog box in the same programme when i click the open in filemenu.
in AWTslow down, one thing at a time
go do the tutorials first
.....................plsss urgentstating your task is urgent is offensive here
learn how to communicate lest you get flamed
good luck

Create PDF reports using ADF

Hi All
I'm buliding a web application using JDeveloper and want to create some pdf reports to end users. Any one knows how to create pdf reports using JDeveloper
Thank You
Padma Kumara

Here you are:
Developeing Reports in ADF
NA
http://nickaiva.blogspot.com

How to create SSRS repot using MDX

Hello,
Can any body let me know how to create SSRS reports using MDX query

Hi Sanjay_S,
Take a look into
Build SSRS Report using MDX
Aftab Ansari

How to create a queue using CVP with ICM script(Comprehensive mode)

Hello Guys,
I would like to know how can I configure a queue in a comprehensive mode using micro-app at CVP + ICM environment. I work with UCCE at least 2 years, so I know how to create a queue using UCCX and/or IPIVR (I do a queue application using UCCX Editor and at ICM I use the Run external Script component), but at CVP I don't know how to create a application at Call Studio and how to call this application at ICM Script Editor to run this queue if there aren't agents available.
Can someone help me to understand how can I do that?
I attached the ICM Script using micro-app. This script runs ok, I call to a Route pattern and CVP route request ICM, so ICM run the script, but if there are no agents available the call drops, so I would like to know how can I create a queue to hold the call and to come back to a available agent.
Regards,
Eric Zapparoli
Unified Communications
Wittel

Out of the check mark in the queue to skill group node you go to another run external script node, then you loop into that over and over again until the call is answered.
david

How to create a crystal Report using C# and SQL Server

Hi, im new in creating crystal report using SQL Server, and im making a project.. and could someone help me how to connect your .sdf (SQL Server File) from the bin to your crystal report? thanks a lot.. i followed some instructions like this one (https://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?referrer=http://social.msdn.microsoft.com/Forums/vstudio/en-US/48c0dd48-5b23-49da-8601-878f8406125e/how-to-create-a-crystal-report-using-sql-server-visual-c?forum=csharpgeneral)
but i got an error on the adding of server name and database portion.. thanks a lot in advance

Hello,
Crystal Reports are supported on
http://scn.sap.com/community/crystal-reports.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

How to create custom report plugin using child region report metadata

Hi,
I want to ask for help on how to create custom report plugin using child region report metadata. My idea is to create a child region, a classic report and set the condition to never.
Then i will query the child report metadata from apex view and use it to create a custom report like using jquery jq-grid. Any idea how i can create a process that will use the child report
metadata? I dont know how i can create a process just like how apex work, how apex render report, coz i want it to be control using the standard apex report attribute. This plugin will
render according to the child report attribute.
Is there anybody here had ever done this?

Hi Nicolette,
Thanks for the reply. I know where to find the metadata, just asking for idea on how the rendering process will be.
Start from determining column heading, column order until finish rendering the report. The same way how apex
render the classic report.
Previously this imy my rendering process:
FUNCTION GETCOLUMN(P_REGION IN APEX_PLUGIN.T_REGION,
                     P_PLUGIN IN APEX_PLUGIN.T_PLUGIN,
                     P_VALUE IN VARCHAR2) RETURN SYS.DBMS_SQL.DESC_TAB2 IS
    VSQLHANDLER     APEX_PLUGIN_UTIL.T_SQL_HANDLER;
    VCOLCOUNT       NUMBER;
    VCOLNAMES       VARCHAR2(2000);
    VAJAXIDENTIFIER VARCHAR2(100);
    VPAGESIZE       TYPEATTR := P_REGION.ATTRIBUTE_04;
    VJSCODE         VARCHAR2(32767);
BEGIN
    VSQLHANDLER := APEX_PLUGIN_UTIL.GET_SQL_HANDLER(P_SQL_STATEMENT => 'select * from s_emp',
                                                    P_MIN_COLUMNS    => 1,
                                                    P_MAX_COLUMNS    => 999,
                                                    P_COMPONENT_NAME => P_REGION.ID);
    VCOLCOUNT := VSQLHANDLER.COLUMN_LIST.COUNT();
    FOR I IN 1 .. VCOLCOUNT LOOP
      VCOLNAMES := VCOLNAMES || '{name: "' ||
                   UPPER(VSQLHANDLER.COLUMN_LIST(I).COL_NAME) || '",';
    END LOOP;
    APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
    RETURN VSQLHANDLER.COLUMN_LIST;
EXCEPTION
    WHEN OTHERS THEN
      APEX_PLUGIN_UTIL.FREE_SQL_HANDLER(VSQLHANDLER);
      RAISE;
END GETCOLUMN;
So this is how i get the header for my report plugin. The same method is use to get the value / data for each column. This process is work. So now
i want to extend my plugin so that i will use all attributes from the child report to render my plugin. So the column header, column order, all will depend
on the child report. And the column display condition is set, it will also check the condition before render the column. Sounds like i want to reinvent
the normal apex rendering process but this is what i want to achieve.
I need help to find the correct logic for my render process. Don't want too much for starting, just want to render the plugin correctly, same with child report,
same columns alias, column ordering and column conditional display.
Thanks,
akulala

Very Urgent..How to create a report Using SQ01 and Sq02.

Similar Messages

Maybe you are looking for