VERY URGENT!! How to Pass a "% " symbol from form to Report
Hi
I am using oracle 10g and passing a symbol "%" as a parameter to the report from a form. But it shows error as follows:
REP-52006: Failed to decode the specified URL PARAMETER1=%.
But it is working when it runs in the Report directly.
Then Why we can't pass the symbol "%" to the report from form.
Please reply me as soon as possible. IT IS VERY URGENT !!
Hi,
Try using a lexical parameter(&parm_1) for a string of values or a bind parameter(:parm_1) for a single value
Thanks,
Kimosabe
Similar Messages
-
How to pass record Group from Forms with DATA_PARAMETER to Reports Server
How to pass record Group from Forms with DATA_PARAMETER to Reports Server using RUN_REPORT_OBJECT?
When we use products on run time we are using data_parameter for passing record Groups to reports via run_product but now we have to use application server and reports server for same reports.
We met with <FRM-41214 Unable to run reports> for passing DATA_PARAMETER to reports server when used RUN_REPORTS_OBJECT.
How can we pass record Group from Forms with DATA_PARAMETER to Reports Server using RUN_REPORT_OBJECT?
Thanks,
ArifHi Mandeep,
Could you please tell me how can i pass data parameter from forms to report through run_product. -
Passing date parameter from forms to report
Hi,
I'm using forms and reports 6i.
I want to pass one date parameter from forms to reports.
Using
Add_Parameter(pl_id,'P_FROM_DATE',TEXT_PARAMETER,:FROM_DT);
giving me error REP-0091- Invalid value for parameter 'P_FROM_DATE'
This i think is because report expects date and here it is converted as varchar.
Please helpHi Divya,
Even I use this kind of statement
Add_Parameter(pl_id,'P_FROM_DATE',TEXT_PARAMETER,:FROM_DT);and works fine for me.
This i think is because report expects date and here it is converted as varchar
Correct.
Open the report in the builder and under Data Model -> User Parameters, Go to the Property Inspector of P_FROM_DATE. Under Parameter, set Datatype as Character instead of Date.
Hope this should work. and tell me if it works(coz it wokred for me). -
Very Urgent: how to define field symbols in class using se24 Points assured
hi all
I am new to abap oo programming. I am using se24 to build a class
where some methods have code which involves working with field sybmols but i am not able to figure out way for how to define field symbols in the attributes section.
I tried defining like : fld_sym type ref to dbtab-fld
but in the method implementation if i try to use it like assign fld to <fld_sym> there it says fld_sym is not defined as a field symbol.
So can anyone please guide me how to define field symbols in se24.
Also what should be the general steps while creating a class using se24.
Points assured
thanksHi
Global classes are like Global fun modules in which the Methods and code is already written and is mainly used for Reusability purpose.
Goto SE24 tcode and see the std global classes like
CL_ABAP_CHAR_UTILITIES
see the links
chk out the links below:
General Tutorial for OOPS
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
Have a look at these links for OO ABAP.
http://www.sapgenie.com/abap/OO/
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
SDN Series:
https://www.sdn.sap.com/irj/sdn/developerareas/abap?rid=/webcontent/uuid/35eaef9c-0b01-0010-dd8b-e3b0f9ed7ccb [original link is broken]
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf
Basic concepts of OOPS
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b6cae890-0201-0010-ef8b-f970a9c41d47
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1591ec90-0201-0010-3ba8-cdcd500b17cf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20display%20data%20in%20alv%20grid%20using%20object%20oriented%20programming.doc
http://www.henrikfrank.dk/abapuk.html
http://www.erpgenie.com/abap/OO/
Reward oints if useful,
Aleem. -
Very Urgent:How to view an object from different angles around 360degrees
Hello
My problem is that i want to view an object which is drawn on the canvas3d in the simpleuniverse from all angles...i mean around 360degrees.
Suppose i have a front view... and i wan to look at the view..at 30 degree ..
plz help me
this is urgent
regards
seemaThanks Titus76. Your technique works. But one more problem. I want to rotate my all the three axis through some specified angle. In other words I want to rotate my viewport. In previous case if I implement ur suggestion only my object rotates, but not axis'. Now I want to rotate my all 3 axis. So that when I rotate, all my three axis rotate. This way my objects should obviously rotate. How will I do that?
Regards -
hi
i need to create an XML with some values file from Oracle Forms 6.0 and then send this XML file To a URL to access the database,which in turn will send me XML file with new values.Can any body help me out as i don't have any ideas
Regards
SunilSunil,
and this must be using a URL and can't be handled by a database stored procedure ?
Anyway, your scenario can be achieved using teh Java Importer in Forms 6i and above. You woudl write a Java program that takes a String and loads it to an URL. It then checks the response URL for its content.
Frank -
How to pass parameters from Forms to Reports
dear all,
i'm running a report from a form using run_product(), now i want
to pass a parameter from a form to report, say i want to display
all the employees of deptno=10, so what parameter should i give
in run_product() and what modifications should i make in the
report???
thanks and regards
Tariq.Yeah,
You can pass parameters to from form to report using
Parameter list. E.g. You want to display all employees of Dept
10.
1. Create report with one user paramter say p_dept
2. Now Using Parameter list and Run Product you can call report,
see following procedure.
/* This Procedure passes department number as a paramter to
Report and displays Report.
Author - Mr. Adinath R. Kamode
Parameter - Deptname (p_dept)
PROCEDURE CALL_REPORT (V_DEPT IN NUMBER)
V_PLIST PARAMLIST; -
- Parameter List and Name
V_PLISTNAME VARCHAR2
(30) := 'RPTLIST';
BEGIN
-- Check existance of Parameter List
V_PLIST := GET_PARAMETER_LIST(V_PLISTNAME);
IF ID_NULL (V_PLIST) THEN
V_PLIST := CREATE_PARAMETER_LIST
(V_PLISTNAME);
IF ID_NULL (V_PLIST) THEN
MESSAGE('Error in
creating parameter list.');
MESSAGE('.');
RAISE
FORM_TRIGGER_FAILURE;
END IF;
-- Add parameter data , name must be same as in Report
ADD_PARAMETER(V_PLIST,'P_DEPT',TEXT_PARAMETER,TO_CHAR
(V_DEPT));
-- Don't display parameter Form
ADD_PARAMETER(V_PLIST,'PARAMFORM',TEXT_PARAMETER,'NO');
RUN_PRODUCT
(REPORTS,'DEPT.RDF',ASYNCHRONOUS,RUNTIME,FILESYSTEM,V_PLIST,NULL)
ELSE
DESTROY_PARAMETER_LIST(V_PLIST);
END IF;
END;
Adi -
Pass User Parameters between Forms and Reports...?
Hi,
I have been trying to pass user parameters from forms to reports using
RUN_REPORT_OBJECT. I am able to run the report from the form, but still don't know how to pass user_parameters. Does anyone know how to do this?
Thanks,
ABYou can use SET_REPORT_OBJECT_PROPERTY with the "REPORT_OTHER" parameter
The following example passes 3 parameters to the report:
SET_REPORT_OBJECT_PROPERTY(pt_report_object_id, REPORT_OTHER, 'paramform=no p_param_1='||pc_param_1||' p_param_2='||pc_param_2); -
How to pass an object from jsp to other jsp using SendRedirect
How to pass an object from one jsp to the other jsp using ssendRedirect with out using the session
I am having 2 jsps
x.jsp and y.jsp
From x.jsp using sendRedirect iam going to y.jsp
From x.jsp i have pass an object to the y.jsp
Is it possible without putting the object in session
Is it possible using EncodeUrl
Please help me Its UrgentIs it possible without putting the object in sessionAnything is possible. Would you accept that it is very difficult?
When you send a redirect, it tells the browser to send a new request for the target page. That means any request parameters/attributes are lost.
Is it possible using EncodeUrl response.encodeURL() puts the session id into a url if the browser does not support cookies. It is purely for retaining the session.
There are two ways that you can communicate across a sendRedirect.
1 - use the session
2 - pass a parameter in the url.
parameters are string based, so passing objects is almost out of the question.
Potentially you could serialize your object, encode it in base64 (so it is composed completely as characters) and pass it as a parameter to the other page, where you retrieve it, unencode it, and then load the serialized object.
Or you can just use the session. -
How to pass the data from a input table to RFC data service?
Hi,
I am doing a prototype with VC, I'm wondering how VC pass the data from a table view to a backend data service? For example, I have one RFC in the backend system with a tabel type importing parameter, now I want to pass all the data from an input table view to the RFC, I guess it's possible but I don't know how to do it.
I try to create some events between the input table and data service, but seems there is no a system event can export the whole table to the backend data service.
Thanks for your answer.Thanks for your answer, I tried the solution 2, I create "Submit" button, and ser the mapping scope to be "All data rows", it only works when I select at least one row, otherwise the data would not be passed.
Another question is I have serveral imported table parameter, for each table I have one "submit" event, I want these tables to be submitted at the same time, but if I click the submit button in one table toolbar, I can only submit the table data which has a submit button clicked, for other tables, the data is not passed, how can I achieve it?
Thanks. -
How to pass multiple values from workbook to planning function ?
Hi,
I have created Planning function in Modeler and it has one parameter(Variable represents = Multiple single values).
When executing the planning function by create planning seq. in the web template : I see value of variable store data like ...
A.) input one value -> V1
B.) input three values -> V1;V2;V3
This function execute completely in web.
However, I want to use the planning function in workbook(Excel).
The value of variable can't input V1;V2;V3... I don't know how to pass multiple values from workbook to parameter(Multiple single values type) in planning function ?
thank you.Hi,
Please see the attached how to document (page no 16).
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be">how to</a>
Hope this was helpful
thanks -
Regarding how to pass the data from web dynpro to workflow
hi gurus,
how to pass the data from web dynpro to workflow.
Regards
vijayCheck this [thread|SAP_WAPI_START_WORKFLOW;
-
How to pass the data from web dynpro to workflow.
hi gurus,
how to pass the data from web dynpro to workflow.
Regards
vijayHi
you can use function module
data ls_input_container TYPE swr_cont.
data lt_input_container TYPE TABLE OF swr_cont.
CALL FUNCTION 'SAP_WAPI_START_WORKFLOW'
EXPORTING
task = ptask
IMPORTING
return_code = lv_return_code
new_status = lv_new_status
TABLES
input_container = pinput_container
message_lines = lt_message_lines
message_struct = lt_message_struct.
where you pass the data in imnternal table "pinput_container" as
ls_input_container-element = 'KUNNR'.
ls_input_container-value = ls_skna1-kunnr ."wd_this->lv_kunnr.
APPEND ls_input_container TO lt_input_container .
ls_input_container-element = 'CLUSER'.
ls_input_container-value = lv_cluser.
APPEND ls_input_container TO lt_input_container .
ls_input_container-element = 'BUKRS'.
ls_input_container-value = lv_bukrs. " youe value as per requirement.
APPEND ls_input_container TO lt_input_container .
ls_input_container-element = 'VKORG'.
ls_input_container-value = ls_sknvv-vkorg. " youe value as per requirement
APPEND ls_input_container TO lt_input_container .
ls_input_container-element = 'VTWEG'.
ls_input_container-value = ls_sknvv-vtweg. "youe value as per requirement.
APPEND ls_input_container TO lt_input_container .
ls_input_container-element = 'SPART'.
ls_input_container-value = ls_sknvv-spart. "youe value as per requirement.
APPEND ls_input_container TO lt_input_container .
*Also Forgot to mention where ptask is your workflow ID *
Regards,
Arvind
Edited by: Arvind Patel on May 14, 2010 7:38 AM -
HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?
HI,
HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?
thanks,
samba.By selection screen, what do you mean? There is no selection screen in WDA as there was in classic dynpro. Do you mean you are using the Select-Options reusable component? Are you wanting to call a standard transaction via ITS - SAPGUI for HTML? Please provide more details to your question.
-
How to pass the data from wa_itab to fieldcatlog?
how to pass the data from wa_itab to fieldcatlog?
Your question doesn't appear to be Web Dynpro ABAP related. Please only post questions in this forum if they are directly Web Dynpro ABAP related. There are several other more general ABAP related forums.
Maybe you are looking for
-
Envio e Recebimento de Notificação de WorkFlow Guided Procedure no Portal
Bom Dia Alguem poderia m ajudar a solucionar um problema Tenho um cenário de WorkFlow de Guided Procedure no portal Erro: O user escolhido não consegue receber o e-mail (notificação) Segue abaixo a descrição do Cenário: Clicar em: Gestão de Inovação
-
Help!!!!! I need to get iphoto lib off of hd which is running really slowly, and clicks rather more loudly than usual, how do i do this, im even on my iphone asking this! Computer also runs inly marginally faster in safe boot mode! Could the apple st
-
Report gives stock in unit of issue
Hi, Mb52 gives stock in basic unit of measure . Is any other report where i want stock in unit of issue with list of material. Regards, Rajendra D. Sawant
-
How can I make iCloud Drive sync?
Hi everyone, I would very much like to use iCloud Drive but I can't get it to sync reliably. Last night I deleted 34 presentations from my iCloud Keynote folder on my MacBook Pro. This morning I booted up my iMac and the files were still there after
-
Re-use Hyper V VM built in Windows Server 2008 R2 host in a new Windows Server 2012 host
Hi Forum members, I was assigned a Windows Server 2008 R2 host machine with Hyper-V which I used to build many VM's for testing. This host machine now is going to be replaced with a new Windows Server 2012 host machine. Is it possible for me to con