Very Urgent in installing your Evaluation CD
i hava evaluation CD Version 7.0 for weblogic platform.When i start server i got Licence Excetion pls help me immediately
Hi,
If this question is related to SQL then please post in SQL forum.
Otherwise provide more information how this sql is being used and do you want to tune the SQL or the way it fetches the information from DB and display in OAF.
Regards,
Sandeep M.
Similar Messages
-
Hi Friends,
what is the meaning of 'I' in IND Val field ,which comes with some wagetypes only, in Basic pay infotype.
If 'I' is there in the field it is not storing the value in a table so there is a problem with the calculations for some developments.
how to restrict that 'I' in basic infotype ?if we restrict that will there be any effect in the other areas?
very urgent..appreciate any help..Hi Nandita
'I' means indirect evaluation of the amount for the wage type. So, if you enter any value, then the amount limit will be computed from using IT0008 or IT0052 and checked with the value entered and 'I' will be removed. If you do not enter any value, then the amount for this wagetype will be computed by SAP function module.
You can check the table T511 and for Wage type where MODNA is not initial are indirect wage types.
Thanks
Navneet -
Very urgent plz installed 9ias but shows nothing
dear fellow i have installed 9ias on win2k adv server member server of a domain
when installing system has stoped after having 100% i restarted the system and it started again installtion and completed successfully but it did not do any thing when i start run form from the web it
says http 404 file not found error of iis please tell me what to do.
when i create sevice from isuite---> NETWORK ADMIN --> NET8 EASY AND CREATE A SERVICE AND TEST IT IT SAYS CONNECTED BUT WHEN USE SQL IT SAYS TNS COULD NOT RESLOVE SERVICE NAME ANY HELP
PLZ
forms config file says
[ACTION] Please configure the following virtual path with your web listener: /forms60java for
physical directory E:\Oracle\806\FORMS60\java.
[ACTION] Please configure the following virtual path with your web listener: /dev60html for
physical directory E:\Oracle\806\tools\web60\html.
[ACTION] Please configure the following virtual path with your web listener: /dev60cgi for
physical directory E:\Oracle\806\tools\web60\cgi.
[INFO] An internet shortcut to run a standard test form, or any form of your choice, has been
created for you in the Oracle Forms program group.
[ACTION] Please configure the following virtual path with your web listener: /jinitiator for
physical directory E:\Oracle\806\JINIT.
plz tell me where to find these variables so i can set them
thanx
at least tell me why jinit did not call why it gives me blank pageimran thanks for ur invaluable i help
i did what u told and see
Error: The requested URL was not found,
or cannot be served at this time.
Oracle Reports Server CGI - Unable to communicate with the Reports Server.
when i go to services and try to start service for report it gives me error
The oracle report server (rep60_<machine> service returned >service specific error 186
i have created a service throu start program isuite >net8easyconfig and tested that service come with success and then copied that tnsname to 806 net80 folder but in no vain any help Ms. Geeta Kapoor....
Yes, obviously you will get this "Error: The requested URL was not found, or cannot be served at this time" as the service is not ready to serve your request.
I never told you to create a TNS Name/service name ........ At the time of installation of the Application Server the Universal Installer creates a service name for Reports Server and stores it in the tnsnames.ora of the 9IAS ORACLE_HOME which is, for eg. c:\iasora\app\oracle\product\9ias\6iserver, but the actual $ORACLE_HOME is c:\iasora\app\oracle\product\9ias\ when you start the reports server it will look in the tnsnames.ora in c:\iasora\app\oracle\product\9ias\6iserver\network\admin folder, when it checks for the service name it will not find it and gives an error.
So for this purpose I asked you to copy the parameter in the Reports c:\iasora\app\oracle\product\9ias\6iserver\network\admin\tnsnames.ora and paste it in c:\iasora\app\oracle\product\9ias\network\admin\tnsnames.ora
Did you edit your $ORACLE_HOME/6iserver/conf/6iserver.conf and specified to process the reports by rwcgi60.
Regards,
Imran Hakeem -
Hi all
I want to fetch just twenty thousands records from table. My query take more time to fetch twenty thousands records. I post my working query, Could you correct the query for me. thanks in advance.
Query
select
b.Concatenated_account Account,
b.Account_description description,
SUM(case when(Bl.ACTUAL_FLAG='B') then
((NVL(Bl.PERIOD_NET_DR, 0)- NVL(Bl.PERIOD_NET_CR, 0)) + (NVL(Bl.PROJECT_TO_DATE_DR, 0)- NVL(Bl.PROJECT_TO_DATE_CR, 0)))end) "Budget_2011"
from
gl_balances Bl,
gl_code_combinations GCC,
psb_ws_line_balances_i b ,
gl_budget_versions bv,
gl_budgets_v gv
where
b.CODE_COMBINATION_ID=gcc.CODE_COMBINATION_ID and bl.CODE_COMBINATION_ID=gcc.CODE_COMBINATION_ID and
bl.budget_version_id =bv.BUDGET_VERSION_ID and gv.budget_version_id= bv.budget_version_id
and gv.latest_opened_year in (select latest_opened_year-3 from gl_budgets_v where latest_opened_year=:BUDGET_YEAR )
group by b.Concatenated_account ,b.Account_descriptionHi,
If this question is related to SQL then please post in SQL forum.
Otherwise provide more information how this sql is being used and do you want to tune the SQL or the way it fetches the information from DB and display in OAF.
Regards,
Sandeep M. -
Very urgent need to install 9.2.0.5 on IBM pSeries!!
Hi All,
This is very urgent requirement for me that I need to install 9.2.0.5 on IBM pSeries AIX V5.3 LPAR configured with HACMP.Is there any precution need to make before installation? and what is "LPAR configured with HACMP".
I mean if you describe "LPAR configured with HACMP" the the task become simple.your advise is highly appriciated.
lot's of thatnks to you.My reply to this post is a pure guess and is based on my experience on VMware tool.
LPAR is a tool which helps you put many OSes on a single Hardware, allowing to run all of them at the same time. Basically all the OSes will share the hardware resources.
This saves the hardware cost for the company and helping utilize the same hardware more effectively. Again, each OS will act as an independent machine (lets call it Virtual Machine), users can specifically connect to this virtual machine istead of connecting to the host machine.
In your case LPAR has one of the OS as AIX V5.3.
So, probably your task is to Install Oracle 9.2.0.5 on the OS AIX V5.3.
Hope it helps. -
Kernel panics, message saying "You need to restart your computer.Hold down the Power..." I am in the middle of HSC very URGENT please help!! Mac keeps needing to restart!!
I looked in console and its saying that it may be because of Sophos Anti-Virus, i deleted and uninstalled all traces of Sophos but looked in console and this is some of the lines coming up:
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.intercheck[6460]) posix_spawn("/Library/Sophos Anti-Virus/InterCheck.app/Contents/MacOS/InterCheck", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.autoupdate[6461]) posix_spawn("/Library/Sophos Anti-Virus/SophosAutoUpdate.app/Contents/MacOS/SophosAutoUpdate", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.notification[6462]) posix_spawn("/Library/Sophos Anti-Virus/SophosAntiVirus.app/Contents/MacOS/SophosAntiVirus", ...): No such file or directory
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck[6460]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate[6461]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification[6462]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:18.291 PM Safari: self <TabContentView: 0x7f8d5dd1aa50>
26/09/13 10:11:22.617 PM Safari: self <TabContentView: 0x7f8d5db7bb00>
26/09/13 10:11:27.866 PM Safari: self <TabContentView: 0x7f8d5c331a70>
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) posix_spawn("/Library/Sophos Anti-Virus/SophosUIServer.app/Contents/MacOS/SophosUIServer", ...): No such file or directory
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) Exited with code: 1
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver) Throttling respawn: Will start in 10 seconds"
Looked all over computer and cant find anything of Sophos please help very urgent!That was all that there was in the most recent one, how long do you think it could take to fix?
Here is the second most recent:
Wed Sep 25 15:39:39 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81757965, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff81acc397fe, CR3: 0x000000001e2b5025, CR4: 0x00000000000606e0
RAX: 0x000000001d31a000, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff80b0dbb710, RBP: 0xffffff80b0dbb820, RSI: 0x0000000000000000, RDI: 0x0000000000000001
R8: 0x000000000000000a, R9: 0x0000000000000378, R10: 0x0000000000000128, R11: 0x0000000000000378
R12: 0xffffff800c626400, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff81acc39802
RFL: 0x0000000000010246, RIP: 0xffffff7f81757965, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff81acc397fe, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80b0dbb3c0 : 0xffffff8000220792
0xffffff80b0dbb440 : 0xffffff80002c4794
0xffffff80b0dbb5f0 : 0xffffff80002da55d
0xffffff80b0dbb610 : 0xffffff7f81757965
0xffffff80b0dbb820 : 0xffffff7f817667a0
0xffffff80b0dbb840 : 0xffffff7f8173a58e
0xffffff80b0dbb870 : 0xffffff7f8177fb6f
0xffffff80b0dbb8a0 : 0xffffff7f81779632
0xffffff80b0dbb8d0 : 0xffffff7f8177d7d5
0xffffff80b0dbb900 : 0xffffff7f8177c6db
0xffffff80b0dbb9e0 : 0xffffff7f817412b8
0xffffff80b0dbba10 : 0xffffff7f81778684
0xffffff80b0dbba30 : 0xffffff7f817449ce
0xffffff80b0dbbb60 : 0xffffff7f81741a4c
0xffffff80b0dbbbc0 : 0xffffff8000655f3e
0xffffff80b0dbbbe0 : 0xffffff800065681a
0xffffff80b0dbbc40 : 0xffffff8000656fbb
0xffffff80b0dbbd80 : 0xffffff80002a3f08
0xffffff80b0dbbe80 : 0xffffff8000223096
0xffffff80b0dbbeb0 : 0xffffff80002148a9
0xffffff80b0dbbf10 : 0xffffff800021bbd8
0xffffff80b0dbbf70 : 0xffffff80002aef10
0xffffff80b0dbbfb0 : 0xffffff80002daec3
Kernel Extensions in backtrace:
com.apple.driver.AppleIntelHD3000Graphics(7.3.2)[A2328231-E577-32FF-B20F-D08BDC FE9C51]@0xffffff7f81738000->0xffffff7f8179bfff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80d2e000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80cf5000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G63b
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 1866666823698
last loaded kext at 480357661446: com.apple.filesystems.smbfs 1.7.2 (addr 0xffffff7f80795000, size 241664)
last unloaded kext at 303348424187: com.apple.driver.AppleUSBUHCI 5.1.0 (addr 0xffffff7f80af7000, size 65536)
loaded kexts:
com.sophos.kext.sav 8.0.14
org.virtualbox.kext.VBoxNetAdp 4.2.16
org.virtualbox.kext.VBoxNetFlt 4.2.16
org.virtualbox.kext.VBoxUSB 4.2.16
org.virtualbox.kext.VBoxDrv 4.2.16
com.logmein.driver.LogMeInSoundDriver 1.0.2
com.Greatdy.driver.SystemAudioCapture 1.0.0
com.apple.filesystems.smbfs 1.7.2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AGPM 100.12.75
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleIntelHD3000Graphics 7.3.2
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AirPort.Brcm4331 561.7.22
com.apple.driver.AppleSDXC 1.2.2
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleIntelSNBGraphicsFB 7.3.2
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.kext.triggers 1.0
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4 -
At the very end of installing iTunes 11.1.1.11 a window appears: "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." Available choice is click "OK" then "Finish" and install has then failed.
Go to START > ALL PROGRAMS > Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you can't find ASU, go to Control Panel:
XP - Add n Remove Programs
Win7/Vista - Programs n Features
Highlight ASU, click change then Repair. -
I have installed an evaluation version of lightroom 5.6;64 bits on my windows 7 64 bits pc sp1. Tecnical capacities of my pc are ok. When I Try to run lightroom i read the following message :"lightroom exe. application failure 0x000007b" Thanks for your help. Pasc39
I did some googling and found alot of topics from you on this issue, to me it simply seems like on of the connectors is broken or loose.
-
Problem with the EP6 SP10 Patch 1 Post Install (VERY URGENT)
Hello,
My installation seems to be well done.
But when I try to do the first connection on the portal, I sign-in the system and it returns errors like :
"Portal Runtime error
An exception occurred while processing a request for :
iView : pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage
Component Name : com.sap.portal.pagebuilder.pageBuilder
The exception was logged. Inform your system administrator..
Exception id: 04:29_01/02/05_0003_7226250
See the details for the exception ID in the log file"
Is there one of you who can help me to solve my problem.
It is very urgent
Thanks in advance
Regards
HumbertHello,
The console logs contain no information bout my problem but I looked in the directory :
e:\usr\sap\DP1\DVEBMGS00\work and here is the contain of the file std_server0.out
PatchLevel 88028.313 December 22, 2004 20:48 GMT
> service DQE ================= ERROR =================
Feb 2, 2005 11:03:28 AM ...Thread.SingleThread.run().OutOfMemory [SAPEngine_System_Thread[impl:5]_63] Fatal:
Feb 2, 2005 11:03:28 AM ...Thread.SingleThread.run().OutOfMemory [SAPEngine_System_Thread[impl:5]_53] Fatal:
Feb 2, 2005 11:03:28 AM ...Thread.SingleThread.run().OutOfMemory [SAPEngine_System_Thread[impl:5]_50] Fatal:
Feb 2, 2005 11:03:30 AM ...Thread.SingleThread.run().OutOfMemory [SAPEngine_System_Thread[impl:5]_30] Fatal:
stdout/stderr redirect
node name : server0
pid : 1820
system name : DP1
system nr. : 00
started at : Wed Feb 02 11:03:37 2005
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude iaik/security/md/SHA a
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
SAP J2EE Engine Version 6.40 PatchLevel 88028.313 is starting...
Loading: LogManager ... 609 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 94 ms.
Loading: ThreadManager ... 15 ms.
Loading: IpVerificationManager ... 16 ms.
Loading: ClassLoaderManager ... 15 ms.
Loading: ClusterManager ... 250 ms.
Loading: LockingManager ... 63 ms.
Loading: ConfigurationManager ... 1031 ms.
Loading: LicensingManager ... 31 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (78 ms).
Service cross started. (125 ms).
Service file started. (125 ms).
Service timeout started. (125 ms).
Service memory started. (156 ms).
Service jmx_notification started. (203 ms).
Service trex.service started. (266 ms).
Service userstore started. (31 ms).
Service tcsecvsi~service started. (297 ms).
Service p4 started. (343 ms).
Service classpath_resolver started. (16 ms).
Service tcsecwssec~service started. (390 ms).
Service deploy started. (2656 ms).
Service apptracing started. (172 ms).
Service log_configurator started. (8031 ms).
Service locking started. (0 ms).
Service http started. (172 ms).
Service naming started. (297 ms).
Service failover started. (62 ms).
Service ts started. (109 ms).
Service appclient started. (140 ms).
Service javamail started. (156 ms).
Service licensing started. (16 ms).
Service jmsconnector started. (172 ms).
Service connector started. (234 ms).
Service configuration started. (16 ms).
Service webservices started. (578 ms).
Service dbpool started. (5343 ms).
Service com.sap.security.core.ume.service started. (2547 ms).
Service security started. (2203 ms).
Service classload started. (109 ms).
Service applocking started. (156 ms).
Service shell started. (344 ms).
Service tceCATTPingservice started. (47 ms).
Service telnet started. (78 ms).
Service keystore started. (516 ms).
Service ssl started. (16 ms).
Service webdynpro started. (172 ms).
Service tcsecsecurestorage~service started. (109 ms).
Service ejb started. (781 ms).
Service servlet_jsp started. (813 ms).
Service dsr started. (343 ms).
Service tcsecdestinations~service started. (141 ms).
Service rfcengine started. (109 ms).
Service jmx started. (829 ms).
Service pmi started. (203 ms).
Service prtbridge started. (688 ms).
Service basicadmin started. (703 ms).
Service adminadapter started. (93 ms).
Service sld started. (1234 ms).
Service monitor started. (672 ms).
Service com.sap.portal.prt.sapj2ee started. (109 ms).
Excluding compile: iaik.security.md.SHA::a
Service jms_provider started. (2954 ms).
service DQE ================= ERROR =================
Service tc.monitoring.logviewer started. (4266 ms).
ServiceManager started for 26532 ms.
Framework started for 28844 ms.
SAP J2EE Engine Version 6.40 PatchLevel 88028.313 is running!
PatchLevel 88028.313 December 22, 2004 20:48 GMT
> service DQE ================= ERROR =================
Regards
Humbert -
my friend shared a video with me on icloud photo sharing and then she deleted it from her camera roll, how do I save it???(very urgent)
DVDs are encoded into MPEG2, which iMovie cannot edit. So you need to convert the DVD back to something else. For highest quality, I recommend that you convert the DVD to Apple Intermediate Codec. There is a free tool called MPEG Streamclip that will do this. You will also need to install the Apple QuickTIme MPEG2 Playback Component.
Here are the details.
1) Download and install the Apple MPEG2 QuickTime Component ($20) - available online from Apple.
2) Download and install MPEG Streamclip from Squared 5 (free).
3) Start MPEG Streamclip
4) Insert your DVD into your Mac. If DVD Player or Front Row starts automatically quit those.
5) Open a Finder window. Navigate to your DVD to the Video_TS folder.
6) Drag the .VOB files from the Video_TS folder and drop then into MPEG Streamclip.
7) If MPEG Streamclip offers to fix timecode breaks, say yes.
8) Use FILE/EXPORT TO QUICKTIME to convert the files to Apple Intermediate Codec (or h.264 if you prefer)
9a) Optional: You can deinterlace your footage in this step, if you like
9b) optional: If you know the date and or time of the footage, name your file
clip-yyyy-mm-dd hh;mm;ss
(let mpeg streamclip provide the extension). This will provide metadata that iMovie will use to put the event in the right year and month.
9c) Optional: If you don't want to make one huge clip out of your DVD, you can make smaller clips by using MPEG Streamclip. Move the cursor to the "in" point of the clip, and press i. Move the cursor to the "Out" point of the clip, and press o. Then do steps 8 through 10 and repeat until you have done this for all clips you want.
10) Save the resulting file in a place where you can find it, like your Desktop.
11) Open iMovie.
12) In iMovie, choose FILE/IMPORT/From File and choose the file you saved in steps 8, 9, 10.
13) iMovie will generate thumbnails and you can edit. -
Unable to start IDC Content Service(Very Urgent)
Hi,
My local system has Windows XP.I have installed Oracle 10g Express Edition,Apache,has jre1.6.0_03 and run the UCM installer.Both IDC Content Admin Service and IDC Content Service are set to start automatically during installation time."IDC Content Admin Service" is getting started automatically but "IDC Content Service" is not getting started.It is getting the following Error Message when we are starting IDC Content Service
Error 1064 : An exception occured in the service when handling the Control Request.
I have already installed Oracle Database 10g and D2k 10g also on my local system.
i am getting following error in the log file
Failed to initialize the server. Unable to initialize the system provider 'SystemDatabase'. Unable to create database connection for the database 'SystemDatabase' with connection string 'jdbc:oracle:thin:@localhost:1521:xe'. Please make sure that the connection string, user and password are correct. Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:xe
Unable to create database connection for the database 'SystemDatabase' with connection string 'jdbc:oracle:thin:@localhost:1521:xe'. Please make sure that the connection string, user and password are correct. Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:xe
java.sql.SQLException: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:xe [ Details ]
A fatal error has occurred. The stack trace below shows more information.
!csFailedToInitServer!csProviderUnableToInitialize,SystemDatabase!csJdbcUnableToCreateConnection,SystemDatabase,jdbc:oracle:thin:@localhost:1521:xe!$Listener refused the connection with the following error:<br>ORA-12505\, TNS:listener does not currently know of SID given in connect descriptor<br>The Connection descriptor used by the client was:<br>localhost:1521:xe<br>!csJdbcUnableToCreateConnection,SystemDatabase,jdbc:oracle:thin:@localhost:1521:xe!$Listener refused the connection with the following error:<br>ORA-12505\, TNS:listener does not currently know of SID given in connect descriptor<br>The Connection descriptor used by the client was:<br>localhost:1521:xe<br>!syExceptionType2,java.sql.SQLException,Listener refused the connection with the following error:<br>ORA-12505\, TNS:listener does not currently know of SID given in connect descriptor<br>The Connection descriptor used by the client was:<br>localhost:1521:xe<br>
intradoc.common.ServiceException: !csProviderUnableToInitialize,SystemDatabase!csJdbcUnableToCreateConnection,SystemDatabase,jdbc:oracle:thin:@localhost:1521:xe!$Listener refused the connection with the following error:
ORA-12505\, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:xe
at intradoc.server.IdcSystemLoader.loadProviders(IdcSystemLoader.java:1949)
at intradoc.server.IdcSystemLoader.initProviders(IdcSystemLoader.java:1729)
at intradoc.server.IdcSystemLoader.finishInit(IdcSystemLoader.java:221)
at intradoc.server.IdcSystemLoader.init(IdcSystemLoader.java:185)
at intradoc.server.IdcServerManager.init(IdcServerManager.java:73)
at IdcServerNT.init(IdcServerNT.java:86)
at IdcServerNT.main(IdcServerNT.java:54)
Caused by: intradoc.data.DataException: !csJdbcUnableToCreateConnection,SystemDatabase,jdbc:oracle:thin:@localhost:1521:xe!$Listener refused the connection with the following error:
ORA-12505\, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:xe
at intradoc.jdbc.JdbcConnectionUtils.getConnection(JdbcConnectionUtils.java:88)
at intradoc.jdbc.JdbcWorkspace.init(JdbcWorkspace.java:97)
at intradoc.provider.Provider.init(Provider.java:68)
at intradoc.server.IdcSystemLoader.loadProviders(IdcSystemLoader.java:1937)
... 6 more
Caused by: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:xe
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:261)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:441)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at intradoc.jdbc.JdbcConnectionUtils.getConnection(JdbcConnectionUtils.java:70)
... 9 more
The Oracle Homes are different for both the Oracle.
If somebody have idea about this problem,please help me. This is very urgent.
Manoj Baghel
[email protected]I think so..
Your Oracle Database doesn't connect to content server..
Maybe, you can edit the configuration of your UCM..
Please open the file at C:\oracle\ucm\server\config\config.cfg..
And then add the code :
NumConnection = 5;
CMIIW -
Very Urgent Help needed - Arabic support in Forms6i& reports6i
Hi,
Its a very very very urgent requirement.
How to Provide the arabic support in forms .
I am working on Windows Xp operating system.
1. How to Configure the Windows XP Operating system to provide arabic support?
In Design time i want to use English and during runtime i should be able to toggle beteen English and Arabic for Entering the data.Arabic data should be captured in seperate fields.
1. How to configure the oracle 8i/9i databases to provide both arabic(Saudi Arabia) and english? what characterset i need to
choose for saudi arabic?
2.How to install forms & Reports with arabic support?
3.How to dispaly the data in both english and arabic in forms and reports during runtime?
I will be really greatful if u are able to provide me that help and my advanced thanks to ur help.This very
very urgent.
Regds,
B.Prasad
[email protected]Badma,
1. How to Configure the Windows XP Operating system to
provide arabic support?Please go to "Regional and Language Options" from the Control Panel. In the "Standards and formats" group of the "Regional Opitons" tab, select "Arabic (Saudi Arabia)". In the "Language for non-Unicode programs" group of the "Advanced" tab, select "Arabic (Saudi Arabia)", then restart Windows. If "Arabic (Saudi Arabia)" is not listed, then please go to the "Langauges" tab and make sure the "Install files for complex script and right-to-left languages (including Thai)" in the "Supplemental language support" group is checked.
1. How to configure the oracle 8i/9i databases to provide
both arabic and english? what characterset i need to
choose for saudi arabic?If you're not planning to support other languages than Arabic and English (7-bit), AR8MSWIN1256 should work for you. If you're planning to support other languages in the future, I would recommend you to create your database in UTF8 (Forms/Reports 6i doesn't work with AL32UTF8 database). Please note Arabic characters are represented in 2 bytes in UTF8 while they are 1 byte in AR8MSWIN1256.
2.How to install forms & Reports with arabic support?If you need Arabic translation, then please select Arabic when you're asked the language(s) to install. Otherwise, notmal Forms/Reports installation should work for you.
3.How to dispaly the data in both english and arabic in
forms and reports?Set your NLS_LANG to ARABIC_SAUDI ARABIA.AR8MSWIN1256.
Hope this helps.
Regards,
- Makoto -
Please help me in creating and scheduling jobs. Its very urgent.
RDBMS: Oracle 9.2.0.4
OS: win2k
OWB Client: 9.2.0.2.8
OWB Repository: 9.2.0.2.0
Hi,
I have created a "process workflow" using OWB and deployed it successfully. Now, I would like to schedule this process. I have installed management server and tried to schedule it but all in vain. I am not able to understand anything. I have read "oracle administrator pdf" and couldnt understand anything. Please dont advise me to read any notes or pdf's because I have tried a lot and was not able to figure out the configuration.
I have a target database named "TARGET". I would like to schedule the workflow process I have created. I am not able to understand preferred credentials and how to execute the XML script generated by the "process workflow". Please help me coz its very urgent.
-AdityaWhy dont you try this? I found it after few tries,
In the create job dialog box
under General
for Override Node Preferred Credentials for entire job
username and password should be the NT or Unix
login where your Runtime database Server reside.
under Parameter
for Override preferred credentials
username and password should be of your runtime
repository user
Regards,
Shree -
Okay, here's my three cents worth,
Are you using Forte "Keep Alive" settings? If yes, you may simply have a
time-out.
While a partition is waiting for a reply from a database, it blocks and
won't respond
to anything, including pings to check if it's still alive. So, if the query
takes longer to
complete than the time-out period of the communication manager, then you
will
loose the connection to the partition.
-----Original Message-----
From: Aberdour George [SMTP:george.aberdourdet.nsw.edu.au]
Sent: Sunday, February 13, 2000 11:39 AM
To: 'Babu Raj'; kamranaminyahoo.com
Subject: RE: (forte-users) Hi All....very urgent...Forte doesn't
handle La rge array properly
Hi,
This sounds almost identical to a problem we have experienced.
If it is the same problem it is because you have compiled a back-end
load-balanced partition, but NOT the router that manages it.
With such a configuration, attempts to send greater than a few thousand
rows
will fail - and it doesn't seem to matter what you set -fm to.
You don't see the problem running distributed from your workspace because
everything is interpreted.
So just compile the router and try again.
Hope this helps.
George Aberdour
(George.Aberdourdet.nsw.edu.au)
-----Original Message-----
From: Babu Raj [mailto:ibcsmartboyyahoo.com]
Sent: Saturday, 12 February 2000 7:24
To: kamranaminyahoo.com
Subject: (forte-users) Hi All....very urgent...Forte doesn't handle
Large array properly
Hi All,
Have anyone experienced problem of retrieving
more than 1500 records from the database table, into
the object.
I use dynamic SQL statement, and populating Array
object from the DBDataSet. When it runs from my
workspace distributed, it works fine. But, when I make
deployment, and install on the test bed, I face
Network connection failure from the client machine. It
looks like, server read the data from the Database,
and while packaging it, to send it across to the
client, server seems to run out ouf memory or couldn't
maintain the connection with the client. I tried to
set -fm flag on that partition, and separately setting
FORTE_GC_SPECIAL too, but still no luck.
we have increased, the rollback segment size on
Oracle too, but still no luck.
Appreciate, your suggestions, if you can,
Thank you,
Babu
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.comOkay, here's my three cents worth,
Are you using Forte "Keep Alive" settings? If yes, you may simply have a
time-out.
While a partition is waiting for a reply from a database, it blocks and
won't respond
to anything, including pings to check if it's still alive. So, if the query
takes longer to
complete than the time-out period of the communication manager, then you
will
loose the connection to the partition.
-----Original Message-----
From: Aberdour George [SMTP:george.aberdourdet.nsw.edu.au]
Sent: Sunday, February 13, 2000 11:39 AM
To: 'Babu Raj'; kamranaminyahoo.com
Subject: RE: (forte-users) Hi All....very urgent...Forte doesn't
handle La rge array properly
Hi,
This sounds almost identical to a problem we have experienced.
If it is the same problem it is because you have compiled a back-end
load-balanced partition, but NOT the router that manages it.
With such a configuration, attempts to send greater than a few thousand
rows
will fail - and it doesn't seem to matter what you set -fm to.
You don't see the problem running distributed from your workspace because
everything is interpreted.
So just compile the router and try again.
Hope this helps.
George Aberdour
(George.Aberdourdet.nsw.edu.au)
-----Original Message-----
From: Babu Raj [mailto:ibcsmartboyyahoo.com]
Sent: Saturday, 12 February 2000 7:24
To: kamranaminyahoo.com
Subject: (forte-users) Hi All....very urgent...Forte doesn't handle
Large array properly
Hi All,
Have anyone experienced problem of retrieving
more than 1500 records from the database table, into
the object.
I use dynamic SQL statement, and populating Array
object from the DBDataSet. When it runs from my
workspace distributed, it works fine. But, when I make
deployment, and install on the test bed, I face
Network connection failure from the client machine. It
looks like, server read the data from the Database,
and while packaging it, to send it across to the
client, server seems to run out ouf memory or couldn't
maintain the connection with the client. I tried to
set -fm flag on that partition, and separately setting
FORTE_GC_SPECIAL too, but still no luck.
we have increased, the rollback segment size on
Oracle too, but still no luck.
Appreciate, your suggestions, if you can,
Thank you,
Babu
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com -
ORA-04062 - very urgent, please help
Error "ORA-04062: timestamp of package "SYS.DBMS_SNAPSHOT_UTL" has been changed" appears while refreshing materialized view with DBMS_MVIEW.REFRESH, the configuration is described below, please, any suggestions what cause the problem?
I have the master database:
db_master
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
and replica database:
db_replica
Oracle Database 10g Release 10.2.0.3.0 - 64bit Production
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
the master and replica databases are installed at different hosts
At db_master:
1. I create table TEST
CREATE TABLE TEST (ID NUMBER PRIMARY KEY);
2.Then create materialized view log on TEST
CREATE MATERIALIZED VIEW LOG ON TEST;
At db_replica:
1. create dblink MASTER to db_master
2. create materialized view
CREATE MATERIALIZED VIEW MV_TEST REFRESH FAST AS SELECT * FROM TEST@MASTER
At db_master:
1.Insert some test values to TEST
INSERT INTO TEST VALUES (1);
INSERT INTO TEST VALUES (2);
INSERT INTO TEST VALUES (3);
COMMIT;
At db_replica:
1. call in job (every 10 sec) DBMS_MVIEW.REFRESH(‘MV_TEST’), or manually:
begin
DBMS_MVIEW.REFRESH('MV_TEST');
end;
sometimes (not at every call the below error callstack appears)
17:07:22 ORA-04062: timestamp of package "SYS.DBMS_SNAPSHOT_UTL" has been changed
17:07:22 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2254
17:07:22 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2460
17:07:22 ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2429
17:07:22 ORA-06512: at line 4
Please, help me solve this problem, what cause ORA-04062?Zjawka,
This forum doesn't consist of paid support personell.
Labeling your request as 'very urgent' must be considered rude.
If you would have looked up the error at all in the online documentation,
you would have got:
ORA-04062: %s of string has been changed
Cause: Attempt to execute a stored procedure to serve an RPC stub which specifies a timestamp or signature that is different from the current timestamp/signature of the procedure.
Action: Recompile the caller in order to pick up the new timestamp.
No why do you do take the trouble to dump all in this junk in a volunteer forum, and you can't be bothered to look up the error message?
Sybrand Bakker
Senior Oracle DBA
Maybe you are looking for
-
Cheque format for manual check assignment document
Friends, I have made a manual cheque assignment for a payment document(through F-53) through FCH5. I have alloted a non-sequencial check lot for the document. Now i want to see the cheque format. How it is possible. I have tried in FBZ5. But i am
-
HT202157 What does it mean by "reorder icons on the second page"?
I'd love to reorder the icons on my AppleTV (3rd Gen) but can't figure out if that's possible. Thoughts? The latest software update says "reorder icons on the second page" but I can't figure out what it means by "second page" or how to get it to wor
-
PDF Viewer Full Screen Nokia N8?
Hello, I was wondering is it possible to view a PDF full screen in landscape mode on the nokia n8 rather than only seeing the pdf aswell as the zoom/scroll tool bar on the right hand side and the options and so on on the bottom. The reason why I a
-
Casting conversion in JLS3 draft
Seems to be missing a post-boxing widening reference conversion:class C { Object o1 = (Comparable<Float>)1.0f; // ok Object o2 = (java.io.Serializable)false; // ok }Please ignore the Objects on the left-hand-sides - they are there only to give th
-
I want to display a repeating frame only when a certain action takes place, like cliking on a link / button. It has be to hidden if the user again cliks on it. There used to be a Button interface in reports which would solve my purpose, but i found t