Very Urgent Issue: Restricted Key Figure does not return any data

Hi all,
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Thanks
SAP BW

Hi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW

Similar Messages

Very Very Urgent Issue: Restricted Key Figure does not return any data

Hi all,
Please help me solving this urgent issue.
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Also in RSRT the SQl generated when these are included in RKF is not
correct.
I debugged and know they are getting populated. As when included in RKF
I can also see the values of customer exit variables from information
tab.
I also know that there is data in cube for those restrictions.
I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
Thanks
SAP BW
**Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any data

Hi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW

Payroll extractor 0HR_PY_1 do not return any data in RSA3 in full mode

Hi,
I have activated Payroll extractor 0HR_PY_1.
I use RSA3 to check the extractor.
It does not return any data(0 records) in full mode.
Do i need to do activate any other object, apart from the datasource?
Thanks in advance for your help.
Regards,
Suresh.

Hi Suresh,
HR extractors need additional authorizations. When the extractor is run, there would be a check if the user is authorized to extract data. Check SAP notes 672514 & 397208. Also find my previous post on this.
Re: Extractor 0HR_PY_1 does not return data to BW
Best Regards,
Murali.

Key figure does not exist

Hi APO Gurus ,
After SCM and Liive Cashe migration , when we run transaction /SAPAPO/SDP94 the following error message is appearing :
" Key figure does not exist " .
Does somebody has any Ideas ? any logical flow for resolution ?
Appreciate your help ,
Yoni

Hi Yoni,
Check on the following
1) Check whether the planning area is initialised after migration
2) Look for any pending transports during migration
3) Check any key figures maintained with calculation type N
4) Check sap note 1352371
5) In case if the error still exists, run report
/SAPAPO/PSTRUCONS
Regards
R. Senthil Mareeswaran.

The product key entered does not match any of the Windows images available for installation. Enter a different product key.

how do you manage to install windows 7 when the message on the screen is "The product key entered does not match any of the Windows images available for installation. Enter a different product key. "

That's a really helpful answer and not smug at all, thanks Carey.
I just downloaded a DVD image from my university's MSDN Academic Alliance program, named "Microsoft
Windows 7 with Service Pack 1 Debug/Checked Build 64-bit (English)", which I wanted to use to install over an existing 32-bit version. I thought the install screen was giving this weird unskippable error described in the OP before I even entered
a key because the 32-bit key I had used on the HDD was somehow interpreted to be used in an upgrade, but no. Even after I wiped the hard drive, this error persisted.
Guess I'll go Google some more on how to install my legit copy of Windows, because this self-serving shit sure isn't helping.
edit: IF YOU GOOGLED THIS AND ARE STILL LOOKING FOR YOUR ANSWER, CHECK HERE:
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/the-product-key-entered-does-not-match-any-of-the/47e6f575-5792-404b-9b7f-2065bdb91011

Corresponding table in the source system does not contain any data -URGENT

Hi Guru's,
I have already uploaded master data.
I have created infosource added infoObjects to it and activated it to create communication strucure.
M using RSA1OLD transaction.
and assigned datasource to infosource ie source system name and clicked ok.
save datasource to infosurce assigned msg displayed, clicked ok.
transfer rules r created, i have also created update rules and assigned infosource to it.
then created infopackage n added execel file name .csv
in datatargets tab selected data target as infocube. n then in schedule tab start data load immediately and clicked ok.
everything is fine upto schedule n in monitor it does not display any data.
what will be the problem??

i have also created update rules and assigned infosource to it.
then created infopackage n added execel file name .csv ??
Are you loading the data from flat file or R3? If you are loading it from R3, why are you giving the Flat file name?
In this case, check in RSA3 (R3 side), whther the datas source is getting the value.
In case you are loading a flat file, you need to create a flat file data source and assign to the infosource.
Thanks..
Shambhu

Managed System Configuration ! The table does not contain any data !

Hi,
In Sol Man Setup , Managed System Configuration, in phase 6 - Create Logical Componets -
There is no Product Version and Product Instance Available.
The message is : " The table does not contain any data "
How can correct this problem ?
Thanks

Hi,
while creating new Logical Component via SMSY , you need to specify Product first.
e.g. if you managed system is ERP 6.0 , select Product as SAP ERP
once you select Product , it automatically fetches information for product Version and Main Instance depending upon Product field input.
Please check and let us know if issue still persits.
Thanks,
Rupali

Product Revenue Bookings and Backlog Dashboard does not display any data

Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?

hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S

BI Publisher Word Template The report does not contain any data fields.

I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please help

Hi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks

File Screening Audit Report does not contain any data : report statistics is empty

Hi ,
I have enabled File screen audit and Record file screening activity in auditing database options in file server 2008.
I am getting details of file screen audit in Event log , But incident report file screen audit report does not contain any value.
Getting report for each incident of file screen audit , But it does not contain any data in report statistics.
Data available in scheduled report of file screen audit.. not available in incident report only..
Please assist...
Thanks,
Vasanth.M
Thanks, Vasanth.M.

Please note that, If the Record file screening activity in the auditing database check box is cleared, the File Screening Audit Reports will not contain any information. To configure file screen audit, I would refer you on this informative
technet library :
https://technet.microsoft.com/en-us/library/cc754540.aspx
Carlo

Search Item drop-down does not show any data for Advanced Search.

Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, Suresh

Hi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu

Xquery does not return any results on 10.2.0.4, does work on 10.2.0.5

I have a Xquery statement that works as expected on Oracle 10.2.0.5 but does not return any results on Oracle 10.2.0.4.
Is this the result of a badly written query? A bug in 10.2.0.4?
Is there a way to rewrite the query so that is does work on 10.2.0.4?
Testcode:
declare
   l_xml xmltype;
   -- Select layers with TileMatrixSet EPSG:28992
   cursor c_layer(p_xml xmltype) is
      select t.*
        from xmltable(xmlnamespaces(default 'http://www.opengis.net/wmts/1.0'
                                   ,'http://www.opengis.net/ows/1.1' as "ows"
                                    ,'http://schemas.opengis.net/gml' as "gml"
                                    ,'http://www.w3.org/1999/xlink' as "xlink"
                                    ,'http://www.w3.org/2001/XMLSchema-instance' as "xsi")
                      ,'for $d in //Layer[TileMatrixSetLink/TileMatrixSet="EPSG:28992"] return $d' passing
                      p_xml columns title varchar2(100) path 'ows:Title'
                      ,format varchar2(100) path 'Format'
                      ,style xmltype path 'Style') as t;
begin
   l_xml := xmltype.createxml('<?xml version="1.0" encoding="UTF-8"?>
<Capabilities xmlns="http://www.opengis.net/wmts/1.0"
xmlns:ows="http://www.opengis.net/ows/1.1"
xmlns:xlink="http://www.w3.org/1999/xlink"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:gml="http://www.opengis.net/gml" xsi:schemaLocation="http://www.opengis.net/wmts/1.0 http://schemas.opengis.net/wmts/1.0/wmtsGetCapabilities_response.xsd"
version="1.0.0">
<Contents>
<Layer>
    <ows:Title>brtachtergrondkaart</ows:Title>
    <ows:Identifier>brtachtergrondkaart</ows:Identifier>
    <Style isDefault="true">
      <ows:Identifier>_null</ows:Identifier>
    </Style>
    <Format>image/png8</Format>
    <TileMatrixSetLink>      <TileMatrixSet>EPSG:28992</TileMatrixSet>
    </TileMatrixSetLink> </Layer>
<Layer>
    <ows:Title>top10nl</ows:Title>
    <ows:Identifier>top10nl</ows:Identifier>
    <Style isDefault="true">
      <ows:Identifier>_null</ows:Identifier>
    </Style>
    <Format>image/png8</Format>
    <TileMatrixSetLink>      <TileMatrixSet>EPSG:28992</TileMatrixSet>
    </TileMatrixSetLink> </Layer>
<Layer>
    <ows:Title>bgt</ows:Title>
    <ows:Identifier>bgt</ows:Identifier>
    <Style isDefault="true">
      <ows:Identifier>_null</ows:Identifier>
    </Style>
    <Format>image/png8</Format>
    <TileMatrixSetLink>      <TileMatrixSet>EPSG:28992</TileMatrixSet>
    </TileMatrixSetLink> </Layer>
</Contents>
</Capabilities>');
   for r_layer in c_layer(l_xml)
   loop
      dbms_output.put_line(r_layer.title);
   end loop;
end;Result on 10.2.0.5:
brtachtergrondkaart
top10nl
bgt

This one's strange indeed.
I can reproduce on 10.2.0.4 and one of the following seems to fix it :
1) Specifying the column list in the SELECT, instead of t.* :
   -- Select layers with TileMatrixSet EPSG:28992
   cursor c_layer(p_xml xmltype) is
      select t.title, t.format, t.style
        from xmltable(or,
2) Using an extended FLWOR expression :
for $d in //Layer
where $d/TileMatrixSetLink/TileMatrixSet = "EPSG:28992"
return $dMaybe you've already noticed but the problem only occurs within a PL/SQL context.
The same query run from SQL is OK.

How to Create a record if vo.executequery does not return any rows

I would like to update a single record on adf form. However if the record does not exist would like to create a row and save it in the table.
The user does not want to add a "create" button on the screen. Hence would need to add the create code if vo.execute does not return any rows...
How to add this and where to add?

you can have a TF router for for exists and does not exist and based on that execute transient VO and other VO.
Add a method call activity like below to create a row in transient VO
public Row createRow()
ViewObjectImpl tVO = (ViewObjectImpl)getTVO();
tVO.executeEmptyRowSet();
Row newRow = tVO.createRow();
tVO.setCurrentRow(newRow);
tVO.insertRow(newRow);
return newRow;
}

Ibots not returning any data

Hi,
I have some ibots that I scheduled to run on a daily basis and which were working perfectly.
Suddenly the same ibots, they run but the content of the attachment says "The specified criteria did not return any data".
I checked the log files and could not see any relavant error.
If I go back in the report that I am sending through the ibot, it runs without any problem.
I tried to send it in different formats and run as different users, but the results are still the same!
Any idea what else I could check?
Type: Warning
Severity: 50
Time: Wed May 15 14:10:19 2013
File: project/webodbcaccess/odbcconnectionimpl.cpp Line: 199
Properties: RptPath-/shared/MICROS/giuliano/cube_build_verification;SID-btilnnapkfo2omg91a71b9m6n2;bindID-1;connID-31;ThreadID-4640;statementID-364;RSP-o:go~r:report
Location:
     saw.odbc.statement.fetch
     saw.subsystem.portal.pdf
     saw.delivers.rpc.getDeviceContent
     saw.rpc.server.responder
     saw.rpc.server
     saw.rpc.server.handleConnection
     saw.rpc.server.dispatch
     saw.threadPool
     saw.threads
SQLFetchScroll returned code SQL_NO_DATA_FOUND

Thanks it solved the issue.
But One more thing Now I have placed the parameters in the where clause of the query
Query-
select field1,field2,field3,field4,field5,job_name,candidate_name,interview_date from etc.ethr_irc_int_details
where field1 is not null
and job_name = :1
and candidate_name = :2
and interview_date = :3
in the VO I am executing
public void iniQuery(String S1, String S2,String S3)
System.out.println("insdie ini query of the VO");
System.out.println("S1 "+S1);
System.out.println("S2 "+S2);
System.out.println("S3 "+S3);
this.setWhereClauseParams(null);
this.setWhereClauseParam(0,S1);
this.setWhereClauseParam(1,S2);
this.setWhereClauseParam(2,S2);
executeQuery();
and in AM
ETHRIntDetailsVOImpl IDVO = (ETHRIntDetailsVOImpl)this.getETHRIntDetailsVO();
// IDVO.executeQuery();
// OAViewObject IDVO = (OAViewObject)findViewObject("ETHRIntDetailsVO");
IDVO.iniQuery(S1,S2,S3);
Row row = IDVO.first();
again I am not getting any data in the row??
Any idea if I am doing any thing wrong..
Please help urgently.
Thanks
Ashish

Binocular search for Cost Center is not returning any data

Hi Gurus,
When clicking on the SRM-Shooping Cart-Cost Assignment- Account Assignment Overview- Cost center Binocular search icon, it is not returning any data. However, when drilling down in the Account Assignment Overview, you will see another Binocular search icon for Cost Center which is working fine.
Any idea of how you troubleshoot it.
Thanks in advace for your help.
HA

Not sure about the cost assignment drill down, but after we applied SP13 to SRM server 550 the binoculars for cost center stopped working. the following note corrected this.
Note 1259735 - Search help of generic account does not work
If it has never worked, then probably need to setup a RFC dialog user for the F4 search help, Multiple threads on here around the dialog user for F4 with details on configuration and use.
JF

Very Urgent Issue: Restricted Key Figure does not return any data

Similar Messages

Maybe you are looking for