Very Urgent - Lock table is full
Hi All,
I have a problem regarding locks. Whenever I tried to execute mass transaction, which will apply/modify locks on the documents I am getting a error message 'Document is blocked by System error'. And sometimes I am getting error message Lock table is full. I tried to delete all locks in the system from SM12 as well, but I could not resolve the problem. If anyone could help me that would be really great.
Best regards,
Venkat
Check this link:
http://help.sap.com/saphelp_nwmobile71/helpdata/en/f0/b57338788f4d72e10000009b38f8cf/content.htm
Regards,
Ravi kanth talagana
Similar Messages
-
Hi ; I want to delete unique record interms of lt_outlt-tabname eq 'SZTU' .
for example
date tabname
12022006 stzu
13022006 stzu
13022006 stzu
I want to delete 12022006 stzu record.
LOOP AT lt_outlt WHERE tabname EQ 'STZU'.
LOOP AT lt_outlt2 WHERE tabname EQ 'STZU'
AND udate EQ lt_outlt-udate
AND utime EQ lt_outlt-utime.
flag8 = 'X'.
ENDLOOP.
IF flag8 EQ 'X' .
DELETE lt_outlt.
CLEAR FLAG8.
ENDIF.
ENDLOOP.Hi,
Please try this.
LOOP AT lt_outlt WHERE tabname EQ 'STZU'.
READ TABLE lt_outlt2 WITH KEY tabname EQ 'STZU'
udate EQ lt_outlt-udate
utime EQ lt_outlt-utime.
IF SY-SUBRC = 0.
DELETE lt_outlt.
ELSE.
CONTINUE.
ENDIF.
ENDLOOP.
Regards,
Ferry Lianto -
Searching for the fields of a table(very very urgent)
Hi all,
i am in graet trouble now.i am searching for the fields like
1)country of origin where the finished good is created.
2) customer sales order number
3)customer sales order line number
i am writing a report for delivery order.in this report i have to refer customer PO & customer SO .
i mean, my company has a customer ( seagate) & seagate has a customer (let maxtor).initially maxtor will give a PO to seagate then seagate will raise a SO againest maxtor.
Then seagate will send PO number(of maxtor), PO line number,SO number(seagate), SO line number(seagate) to our company.
Then i have to write a report for sales order & delivery order.in these reports i have to refer seagate PO number & seagate SO number for reference.
i got PO number as vbkd-bstkd but not getting any field for reference Sales order.plz advice me on this. it is very very urgent.
ur idea is highly appreaciated.
Thank u very much.
Regards
pabitracheck out tables VBAK(sales order header), VBAP(sales items)
-
How to enable DFF for each line level on a Table Region - very very urgent
Hi,
I have a Master- Detail Page, Detail is Table region. I need to enable DFF (Context Based) for each line. If any one has done similar requirement please share how to do this. Its very very urgent.
It is a standard page.
Thanks,
Edited by: user8996062 on Jun 29, 2011 2:58 AMCan any one please help me on this it is very urgent.
Thanks, -
Its very urgent:How to insert data one table to another table
Hi all,
i am very new to oaf.
i have employee_number(per_all_people_f) lov is there.once select the employee number and click on the submit button
what ever select the employee number it ll move to new_operation_manager in custom table.
plz help me how to move.
its very urgent.
Thanks
Latha.
Edited by: Latha on Dec 21, 2011 9:33 PMHi Gyan,
Sorry, i will not repate.how to close the thread.
Gyan i have no knowledge on this issue.
plz help me.and where to mention,data is which table to insert.
plz send one sample code.
its very urgent gyan.
i wrote the am,co codes
in am:
public void NewoperationManagerLogic()
ManagerCustomTableVOImpl vo1=getManagerCustomTableVO1();----> here which vo take
OADBTransaction oadbt=getOADBTransaction();
if(!vo1.isPreparedForExecution())
vo1.executeQuery();
Row row=vo1.createRow();
vo1.insertRow(row);
in Co processrequest:
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.invokeMethod("NewoperationManagerLogic");
in co processform request:
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
if(pageContext.getParameter("Submit")!=null)
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.getOADBTransaction().commit();
throw new OAException("Records Saved Sucessfully",OAException.INFORMATION);
thanks
latha
Edited by: Latha on Dec 22, 2011 1:26 AM -
Very Urgent Table Column Design
Hi,
This is what i have done, I am having a table with 2 columns.One is Text view and the other is Link to Action. I set the Table row count as 10. Table design is standard and all columns design is standard. Now The first text view column appears blue in colour and the second Link to action appears in White. To make both to have same white colour i made the table as Read only now both columns appear as white. If the table have more than 10 records it works fine. But if it is less say 4 records then first four records are in white remaining are in light blue. I want to make every thing to appear same white or same blue color. How to do this .
Kindly Help this is very Urgent
Rkhi rk.......
try this out.......
consider your are having 4 records but the line count is 10 in the table.
insert 6 empty records into the table.
it will work fine.
---regards,
alex b justin -
Its very urgent:how to insert data into database tables
Hi All,
I am very new to oaf.
I have one requirement data insert into database tables.
here createPG having data that data insert into one custom table.
but i dont know how to insert data into database tables.
i wrote the code in am,co as follows.
in am i wrote the code:
public void NewoperationManagerLogic()
ManagerCustomTableVOImpl vo1=getManagerCustomTableVO1();
OADBTransaction oadbt=getOADBTransaction();
if(!vo1.isPreparedForExecution())
vo1.executeQuery();
Row row=vo1.createRow();
vo1.insertRow(row);
in createPG processrequest co:
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.NewoperationManagerLogic();
process form request:
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
if(pageContext.getParameter("Submit")!=null)
ManagerInformationAMImpl am=(ManagerInformationAMImpl)pageContext.getApplicationModule(webBean);
am.getOADBTransaction().commit();
please help with an example(sample code).
its very urgent.
thanks in advance
Seshu
Edited by: its urgent on Dec 25, 2011 9:31 PMHi ,
1.)You must have to create a EO based on custom table and then VO based on this EO eventually to save the values in DB
2.) the row.setNewRowState(Row.STATUS_INITIALIZED); is used to set the the status of row as inialized ,this is must required.
3.) When u will create the VO based on EO the viewattributes will be created in VO which will be assigned to the fields to take care the db handling .
You must go thtough the lab excercise shipped with you Jdeveloper ,there is a example of Create Employee page ,that will solve your number of doubts.
Thanks
Pratap -
List of Obsolete Tables in ECC 6.0 - Very Urgent
We are planning to upgrade from 4.6c to ECC 6.0. Heard that there are many standard objects obsolete in ECC 6.0. Can anyone give me the List of Obsolete Tables and also the standard objects in ECC 6.0 with their updated tables and obejcts. This is required very urgently.
Dear,
You may have an overview wirth Solution Browser tool (at the solution point of view) in order to compare functionality between your current system and the ERP 2005.
at:
http://solutionbrowser.erp.sap.fmpmedia.com/
You can get the detailed release information from the following link.
http://service.sap.com/releasenotes.
A release note is a brief explanation of new features or changes to the system since the last software release. A release note typically describes a new function or an existing function that has been enhanced or changed.
I hope this helps.
Lucio Rodrigues
SAP Active Global Support -
Very Urgent : Reterival of AWKEY field from BKPF table
Hi,
I am making a report in which i have to make relation of 2 fields BKPF-AWKEY and MKPF-MBLNR . but the problem is i am not to reterive data from it as i have to make inner join among these fields so data can be reterived fmo these tables.
plz provide me some guidelines as it is really urgent to me and help will be deinfately rewarded.First and foremost, i would advice you not to use words like VERY URGENT in your subject. You might want to go through the following link to understand the basic rules of the forum:
[Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
For your requirement, below code might help you understand the logic in determining the link between BKPF and MKPF.
TYPES: BEGIN OF t_bkpf,
bukrs type bukrs,
belnr type belnr_d,
gjahr TYPE gjahr,
awtyp type awtyp,
awkey type awkey,
end of t_bkpf.
types: begin of t_mkpf,
mblnr type mblnr,
mjahr type mjahr,
end of t_mkpf.
data: i_bkpf type STANDARD TABLE OF t_bkpf,
i_mkpf type STANDARD TABLE OF t_mkpf.
data: wa_bkpf type t_bkpf,
wa_mkpf type t_mkpf.
PARAMETERS: p_bukrs type bukrs OBLIGATORY,
p_gjahr TYPE gjahr OBLIGATORY.
START-OF-SELECTION.
SELECT bukrs belnr gjahr awtyp awkey
into table i_bkpf
from bkpf
UP TO 20 ROWS
where bukrs = p_bukrs
and gjahr = p_gjahr
and awtyp = 'MKPF'.
IF NOT i_bkpf[] is INITIAL.
select mblnr mjahr from mkpf into table i_mkpf
for ALL ENTRIES IN i_bkpf
where mblnr = i_bkpf-awkey(10).
* and mjahr = i_bkpf-awkey+10(4).
ENDIF.
LOOP AT i_bkpf into wa_bkpf.
READ TABLE i_mkpf into wa_mkpf
with key mblnr = wa_bkpf-awkey(10)
mjahr = wa_bkpf-awkey+10(4).
IF sy-subrc eq 0.
write:/ 'Accounting Document:', 23 wa_bkpf-belnr,
35 'Material Document:', 55 wa_mkpf-mblnr.
ENDIF.
ENDLOOP. -
Splitter operator doesnt use multi table inserts in OWB...very very urgent
Hi,
I am using OWB 9i to carry out tranformations. I want to copy the same seuence numbers to the two target tables.
Scenario:
I have a source table source_table, which is connected to a splitter and the splitter is used to dump the records in two target tables namely target1_table and target2_table. I have a sequence which is also an input to the splitter, so that I can have the same sequence number in the the two output groups of he splitter. I then map the sequence number from the two output groups to the two target tables expecting to have the same sequence number in the target tables. But when I see the generated code it creates two procedures and effectively inserts sequencing numbers in the target tables which are not consistent. Please help me so that I have the same sequencing numbers in the target tables which are consistent.
Well the above example works in row based operating mode but not in set based mode. Please give me a valid explanation.
OWB pdf says that splitter uses multi table inserts for multiple targets. After seeing the generated code for set based operations I dont agree to this.
Its very urgent.
thanks a lot in advance.
-SharatHi Mark,
You got me wrong, let me explain you the problem again.
RDBMS oracle 9.2.0.4
OWB 9.2.0.2.8
I have three tables T1,T2 and T3.
T1 is the source table and the remaining two tables T2 and T3 are target tables.
Following are the contents of table T1 -
SQl>select * from T1;
DEPTNAME LOCATIO?N
COMP PUNE
MECH BOMBAY
ELEC A.P
Now I want to populate the two destination tables T2 and T3 with the records in T1.
For this I am using splitter operator in OWB which is suppose to generate multi table inserts, but unfortunately its not doing so when I generate the SQL. There si no "insert all" command in the sql it generates.
What I want is, when I populate T2 and T3 I use a sequence generator and I want the same sequences for T2 and T3 eg.
SQl>select * from T2;
NEXT_VAL DEPTNAME LOCATIO?N
1 COMP PUNE
2 MECH BOMBAY
3 ELEC A.P
SQl>select * from T3;
NEXT_VAL DEPTNAME LOCATIO?N
1 COMP PUNE
2 MECH BOMBAY
3 ELEC A.P
I am able to achieve this when I set the operating mode to ROW BASED. I am not geting the same result when I set the operating mode to SET BASED.
Help me....
-Sharat -
Can anybody send me CRM tables and their relationship? It is very urgent.
Can anybody send me CRM tables and their relationship? It is very urgent.
and all the function modules availble in CRM.
Jayalakshminarayana KilaruHello Vikas,
Can you please send CRM tables to [email protected]
thanks in advance -
Stale Date Error in Advance Table...Its Very Urgent
Hi All,
I am getting stale data in Advance Table Regions. I am having to buttons, if I selected button1 it shows one advance table region (with show All and Hide All options) it is showing correct data in the details view.
If I select button2 and new advance table will be shown (with show All and Hide All options) and here if I select show all then I am getting stale data. For both advance tables I am using same two VO's (HeaderVO & DetailVO) but the Viewlinks are different.
For your reference below is the error.
Cause:
The number of displayed records, 8, exceeds the actual number of records, 1, in view object NetAppsProjCreationAM.ProjectLinesVO1_ProjectErrorVL_ProjectLinesVO. Some of the displayed records may have been deleted.
Please any one of you guys help me out in this issue, this is very urgent!!
Thanks in Advance.Then it should work, can you check by putting debugging messages that your VO query is fetching rows properly?Also make sure that all transient columns attributes in VO wizard are not marked selected in query!
--Mukul -
Very Urgent - Problem with Table MSEG
Hi All,
I wanted to add customer fields to MSEG Table. So I created a Structure ZISU with 4 fields and appended that to the table with Append Structure name ZExtensionin name.
Now when I deleted one field from the structure and wanted to activate it. But it should an SQL Error while activation.
So I mistakenly deleted the ZExtensionin from MSEG Table. It displayed that it is deleted but it is still visible in MSEG with the fields.
Due to this, both structure ZISU and table MSEG are been shown as "Partially Active".
What shall I do now to make everything fine ?
Its very urgent. Please help me....
Reward Points for Useful answers.
Thanks,
HarishHi Harish,
Goto SE14 and adjust the table and then activate your table. This should work.
Thanks.
<b>Plz reward points if helpful</b> -
Impact on upgradation with tables TTAXI & TTXY Very urgent
Kindly can any one let me know the Impact on upgradation with tables TTAXI & TTXY Very urgent.
Thanking you in advance
Regards
VeenaHi,
The problem is that you controls are not beeing freed. You have not passed the lifetime parameter a value when you create the container and text editor. This will set the lifetime to lifetime_imode which means the control will remain active either until the internal session (your transaction) ends or you explicitly call the free method for each control.
Add the lifetime parameter to the call and set the lifetime to cl_gui_control=>lifetime_dynpro.
From
De Wildt -
Fields for table-----very very urgent
Hi all,
my company is following BAPI instead of IDOC for it's EDI immplementation.so i am writing a report for 856 signal(shipment notice).the procedure is like this.
after shipment creation,i will download all the PO,SO & shipment data to a text file(edi format).then we will transfer this file to 3rd party EDI software.then that software will send that signal or file to our customer.
i need some datas to download. but i am not getting those fields.you can find these fields in the 856 document of EDI.those field descriptions are like
1)packaging code
2)SCAC code
3)shipment method of payment
4)waybill number
5)duns number
6)entity identification code for customer
7)measurement reference code for packing item (pallet)
8)measurement qualifier for packing item like pallet
9)title transfer date & title transfer time
it is very very urgent.plz suggest.helpful answers will be rewarded.
any suggestion will be highly appreaciated.
Regards
pabitra<b> ALV_GRID_DISPLAY, how to ovewrite subtotal obtained by ALV sort</b>
I want to overwrite the subtotal value in column C (Currently 60 ) which i got using standard ALV sort.
Example: using ALV_LIST_DISPLAY function module & sort functionality:
Column-A____Column-B_____Column-C____Column-D
K1____________2_____________10__________20
K1____________2_____________20__________40
K1____________3_____________30__________90
subtotal:________7____________60_________150
Note : Each row in Column C is calculated as D/B.
I would like to extend the calculation in subtotals also.
But subtotals give me the sum of values in C.
In column C,I want 150/7 (subtotal of D / subtotal of B)
I.E., Column C = 150 / 7 = 21.42.
Any inputs regarding my problem would be much appreciated.
Thanks in advance !!
Maybe you are looking for
-
Adobe X Standard Crashes Randomly while Scanning
Good Morning, I am an IT company for a local Accounting firm and they use Adobe to scan small and large documents for archival and sorting reasons. We recently upgraded their machines to Windows 7 x64 and they are having issues with adobe crashing ra
-
Cannot read screen for near last installation step, just dots to click, no instructions
My installation screens just have circles to clik on, no explanation as to what the dots are for...and a blank to fill in as to location, but no clue as to if it wants e-mail, po address, etc....so can't finish installation "next" till it's filled..
-
I downloaded Photoshop Elements 10 on to my new computer but smudge tool missing
I downloaded Photoshop Elements 10 on to my new computer but smudge tool is now missing. How do I get it?
-
AP Invoice Onhold account missing
Hi Experts, I am facing issue in posting AP Invoice, when i copied all the data from GRN and try to add the AP invoice,system give me error ON HOLD account is missing, what is the meaning of this error? i have verified all the GL settings, everything
-
HELP!!! can't install flash player. getting error code TN_19166
can anyone help me with this? i keep trying to install flah player and i keep getting an error code of TN_19166. i googled it and i looks like maybe a windows registry error? does anyone know how to fix this? PLEASE HELP!!!!