Very Urgent - Problem with Table MSEG

Hi All,
I wanted to add customer fields to MSEG Table. So I created a Structure ZISU with 4 fields and appended that to the table with Append Structure name ZExtensionin name.
Now when I deleted one field from the structure and wanted to activate it. But it should an SQL Error while activation.
So I mistakenly deleted the ZExtensionin from MSEG Table. It displayed that it is deleted but it is still visible in MSEG with the fields.
Due to this, both structure ZISU and table MSEG are been shown as "Partially Active".
What shall I do now to make everything fine ?
Its very urgent. Please help me....
Reward Points for Useful answers.
Thanks,
Harish

Hi Harish,
Goto SE14 and adjust the table and then activate your table. This should work.
Thanks.
<b>Plz reward points if helpful</b>

Similar Messages

Very urgent : Problem with field attributes in Datasource

Hi
I am getting a problem with field attributes in the datasource.
The issue came up after i modified the extract structure-i modified one field and
added one field to the structure.Now those two fields are not visible in BW.
When i checked with transaction rsa2, i could find that for those two fields , the
field attribute is <b>'A'</b> which is <b>'Field in OLTP and BW Hidden by SAP'</b>.
I tried to modify the field attribute to make it visible.Now the issue is that it is not getting reflected after transport in the Q system.What can be the issue.In the Q system its still the old value 'A' ,which makes the fields invisible.
Please let me know what can be the issue.
Regards
Leon

Hi,
did you change this attribute via RSA2?
you need to change your datasource via postprocessing (RSA6); then transport your DS to your Q source system.
Replicate your datasources in your BW.
Finally modifiy your Transfer Structure by editing your TRules ( tab Datasource/Tran structure), move your new fields from the right frame to the left frame)
Maintain your TRules
Activate
hope this helps...
Olivier.

Urgent problems with image viewing on my 20 inch Cinema display???

I have a very urgent problem concerning my Apple Cinema 20 inch Display and my SpyderPro2 on my Mac Pro Intel Dual Core Xeon 2x 2.66GHz.
I have been using the Spyder for some years now, but recently I have been having big problems with the results.
I have a major contract with a jewellery company in London, where I clean up digital photos. Images that I have lightened up to look great on my Cinema Display have been reported by my client to look pretty dark on their PC's in their offices.
Some of these images show lines and grubby patches??? To check this I opened files in Photoshop and moved the levels 'black' slider down quite some way, and did see evidence of what the client could see at their end? It seems that when I have used a faded eraser brush it leaves a light patch in between the shadows of the jewellery. This shouldn't be visible to the naked eye though?
I must point out that when I use the eyedropper tool on images, to read the amount of grey or colour in the white areas around the peices, I am shown values of 1,2 or 4 maximum in the CMYK values. 4 percent out of 100 is nothing and should not be visible to the naked eye?
How is it that my clients PC's can see dark shadows and where my eraser brush has rubbed out???
I have tried many re-calibrations and also tested all of my older calibrations dating back a few years. I have also tested the same faulty images on Intel iMac's, an eMac, and a few PC's. On the iMac's I can just about make out the artefacts that my client can see, but nothing that I would deem as unacceptable.
I am at a loss as to the fault, but It may be the Spyder2 Pro's inability to calibrate my Apple Cinema display properly? I may lose my contract which I cannot afford to do, and I simply have to find the cause ASAP.
I have my Mac's in my office apartment next to two bay windows. I have vertical blinds there. When calibrating I have always turned off all the lights and pulled the blinds right back so that only the light from the two large window doors is coming in.
For graphic design the calibrations seemed to be okay for quite some time, but recently it is getting harder to achieve good results with the Spyder? This could affect all of my workflow which is very serious. But I must stress that overall the Spyder results are not terrible. I can see good colours and dark levels and in general across all of my calibrated profiles, the jewellery looks acceptable on my Cinema Display?
I did say to my clients that they should calibrate their PC screen properly but their offices have many Screens and they all show the same artefacts (some much worse than others)? I know that PC Screens are darker than Mac's but a 4% grey should not be visible????
As these are a web company the images will be seen by PC users around the world and most of these will have no calibration on their screens. What can be done to prevent this and what is the cause of this? I can't possible please everyone, but as a creative professional I have to be 100% certain that my workflow is at its best.
I need urgent help to solve this or loose valuable business? I hope that you are able to help solve this mystery.
I have just purchased the new Spyder3 Pro which I hope will give perfect results but I have to find out what the cause of this is. If some of the fault lies with the client, I can charge these for all the testing and calibrating I have done.
Kind regards,
Jason Conway
ideo-sync - inspired design.

One thing you might want to try adjusting is the gamma setting in Displays Preferences color calibration area. Macs typically are set at 1.8 but PCs will often use 2.2. That could account for the difference.

What could be the problem with table REGUH

Hi exprts
i developed a report . its wrking ok in developemt system
but in Quality system ,
the below query is taking more time.
in quality even i have taken slection criteria which is very less than devlopment selection.
please tell me the below query is performance wise not good or
is there any problem with table REGUH in quality system?
IF NOT ( t_bsak_aux[] IS INITIAL ).
    SELECT laufd laufi xvorl zbukr lifnr rwbtr kunnr empfg"
           vblnr ausfd rzawe
      FROM reguh
      INTO TABLE t_reguh
      FOR ALL ENTRIES IN t_bsak_aux
      WHERE laufd <> space
        AND laufi <> space
        AND zbukr = t_bsak_aux-bukrs
        AND lifnr = t_bsak_aux-lifnr
        AND vblnr = t_bsak_aux-augbl.
thanks in advance
regards
neeru

Hi,
Using SPACE against the keys (LAUFI, LAUFD - specifically LAUFD) will most likely return no results. LAUFD, being one of the keys and the date which the program is supposed to run (considering that this is settlement data - it has already run) - implies that this field will be populated. Putting " = SPACE" in your where clause is saying that you want to find records from the table where those fields are not populated. That is fine for LAUFI, considering it is the indicator for a proposal only. In my requirement, my client did not want to see proposals but only real payment runs - therefore, LAUFI = SPACE is correct.
The reason you are having poor performance while selecting form this table is because it is a cluster table like bseg. This thread explains a little bit of why cluster tables are a performance nightmare when trying to select - although it is about bseg, you will get the idea:
http://blogs.ittoolbox.com/sap/db2/archives/select-from-bsegrfblg-performance-problem-14247
I'm trying to find an alternative to get bank account information regarding payments - I will post a reply if I am lucky to find one!
Good luck

Very big problem with JSF about FORM and "id=" for HTML form's elements and

I have discovered a very big problem with JSF about FORM and "id=" for HTML form's elements and java instruction "request.getParameterNames()".
Suppose you have something like this, to render some datas form a Java Beans :
<h:dataTable value="#{TablesDb2Bean.myDataDb2ListSelection}" var="current" border="2" width="50%" cellpadding="2" cellspacing="2" style="text-align: center">
<h:column>
<f:facet name="header">
<h:outputText value="Name"/>
</f:facet>
<h:outputText id="nameTableDb2" value="#{current.db2_name_table}"/>
</h:column>
</h:dataTable>
Everything works fine...
Suppose you want to get the name/value pairs for id="nameTableDb2" and #{current.db2_name_table} to process them in a servlet. Here is the HTML generated :
<td><span <span class="attribute-name">id=<span class="attribute-value">"j_id_jsp_1715189495_22:0:nameTableDb2">my-table-db2-xxxxx</span></td>
You think you can use the java instructions :
Enumeration NamesParam = request.getParameterNames();
while (NomsParam.hasMoreElements()) {
String NameParam = (String) NamesParam.nextElement();
out.println("<h4>"++NameParam+ "+</h4>);
YOU ARE WRONG : request.getParameterNames() wants the syntax *name="nameTableDb2" but JSF must use id="nameTableDb2" for "<h:outputText"... So, you can't process datas in a FORM generated with JSF in a Servlet ! Perhaps I have made an error, but really, I wonder which ?
Edited by: ungars on Jul 18, 2010 12:43 AM
Edited by: ungars on Jul 18, 2010 12:45 AM

While I certainly appreciate ejb's helpful responses, this thread shows up a difference in perspective between how I read the forum and how others do. Author ejb is correct in advising you to stay inside JSF for form processing if form processing is what you want to do.
However, I detect another aspect to this post which reminds me of something Marc Andreesen once said when he was trying to get Netscape off the ground: "there's no such thing as bad HTML."
In this case, I interpret ungar's request as a new feature request. Can I phrase it like this?
"Wouldn't it be nice if I could render my nice form with JSF but, in certain cases, when I REALLY know what I'm doing" just post out to a separate servlet? I know that in this case I'll be missing out on all the nice validation, conversion, l10n, i18n, ajax, portlet and other features provided by JSF".
If this is the case, because it really misses the point of JSF, we don't allow it, but we do have an issue filed for it
https://javaserverfaces-spec-public.dev.java.net/issues/show_bug.cgi?id=127
If you can't wait for it to be fixed, you could decorate the FormRenderer to fix what you want.
I have an example in my JSF book that shows how to do this decoration. http://bit.ly/edburnsjsf2
Ed

Problem with table formatting

I'm having a lot of problems with tables not reflecting their formatting when I open them in a browser. I've tried opening in Safari, Firefox & Camino with the same results. For example, a row with the following html content has a much larger height & aligns the text to the top when opened in a browser:
<tr>
          <td height="15" colspan="3" valign="middle"><h6 align="center">Summer 2009</h6>
          </td>
        </tr>
If it matters, this is a row in a table nested in another table. Here's the code down to the row in question (all tags are closed properly in the remaining code):
<table width="600" border="2" align="center" cellpadding="0" cellspacing="0">
    <tr>
      <td align="center" valign="top"><img src="images/events.jpg" width="250" height="35"></td>
    </tr>
    <tr>
      <td align="left" valign="top">
      <table width="100%" border="0" align="center" cellpadding="1" cellspacing="0">
        <tr>
          <td height="15" colspan="3" valign="middle"><h6 align="center">Summer 2009</h6>
          </td>
        </tr>
I am using a style sheet for text. Here's the code for "h6" if that matters:
h6 {
font-family: Verdana, Geneva, Arial;
font-size: 14px;
font-weight: bold;
color: #660099;
Any ideas is appreciated. This is driving me nuts. Spacing and alignment sometimes work and sometimes don't work. Dreamweaver is supposed to make such things easier!
Kevin

Header tags are usually used round a bit of text, not parts of a table, and if you don't specify the margins on them, can force different amounts of space below in different browsers. Try making the bottom margin on h6 zero, and confine it to text within a cell.
Also, if you can upload your page somewhere and let us have the url it will be easier to troubleshoot.

Apple Banned me, because of a very weird problem with my "Factory Unlocked"

Hi Everybody! Im having a very weird problem with my unlocked iphone 4.
First of all, i would like to apologize because of my english, is not very good. My native language is Spanish.
Well.. Im from Mexico, and here we can buy the iphone Unlocked on the Apple Online Store.
Here's my problem. Apple has exchanged my iphone 3 times.
I returned the iphone the first time because the screen was totally yellowish, other than that everything was working great!, that was by the end of September.
On October 20th, i recieved my second iphone, and then a bigger problem started .
Before i continue, let me give you this information: here in Mexico we have basically 3 cell phone companies
1.- Telcel
2.- Movistar
3.- Unefon
OK, now on october 20th, i recieved my second iphone, and then procced to activate via itunes using my UNEFON sim card (microsim).
And every time i tried to activate it, only got this message onscreen:
http://i148.photobucket.com/albums/s2/jorgelomeli/Screenshot2010-10-29at24915PM. png
I though something was wrong with my brand new factory unlocked iphone 4.
I have 4 more simcards from my brothers (they all had iphone 4 too)
I tried telcel sim card, and i could activate my iphone. Then i insterted the Movistar microsim, and it worked too!! But then when i put the Unefon sim, the itunes logo inmediatly appears on the screen asking to activate on itunes, and when i tried that, the only response i got was the image above saying " The Simcard inserted on this iphone does not appear to be supported"
Weird thing here is, that, when i put my Unefon sim card on my brothers iphone 4, it worked great! on all of them, internet 3g, phone, wireless , evrything!
I called apple support, and they exchange the iphone for another one.
I recieved the third iphone on October 29. Last friday. and guess what? SAME PROBLEM! different serial number, same week production (week 42) but exactly the same message on itunes.
Very, very frustrated, i called apple again, and after 1 hour with thechnical support, they told me " We are sorry, but we can only offer you, your money back, NO MORE EXCHANGES FOR YOU"
I said why?... i dont want my money back! i want an UNLOCKED iphone!, but they refuse to give me another iphone.
When i asked techincal support, why my unefon sim card worked great on all three of my brothers iphone but not on mine, he just told me, "I really dont know, i guess they just got lucky" ****, this answer put all my trust i had on apple products for years, right on the garbage.
Since they refused to give me another iphone, i accepted my money back, and inmediatly after i finished the call, i asked my brother to buy me one more time an iphone 4 using his name, and his credit card. Now i have to wait until November 8-12 to recieve my new iphone, hoping this time i get a REAL UNLOCKED iphone, and not a partially unlocked iphone.
btw. i even went to Unefon costumer service and bought a new prepiad line, with a new microsim, just to be 100% sure that this problem is not because of the sim. And again didnt worked on my iphone, but it worked on any of my brothers iphone4.
Serial numbers of the 3 iphones:
79039C0U* (this one worked great with Unefon, only problem was yellow screen)
85042GR4*
81042FJB*
What do you suggest me? any info would be really aprecciated
FYI i also restore 4 times the last iphone and nothing seemed to work, i use 3 different computers, Macbook Pro, iMac, and an Hp with Windows 7, and the same message on all three computers.
Wierd thing also, one of my brothers bougth an iphone 4 this last week too, but he bought the 16Gb not the 32Gb. His iphone production week is 42 also! and when i put my Unefon sim in his iphone works great!
I dont know what else i can do, I just need to have faith that my new iphone coming this november will be real unlocked, but what if i'll recieve an iphone and then the same problem?? time for android? just kidding really guys, what can i do? anyone with similar problem like me? i dont wanna use Telcel or Movistar, i wanna use Unefon, and thats why i bought an Unlocked iphone
btw: jailbreak is not a solution for me, because i always like to use legal software on all my apple products, and because of the warranty.

According to http://support.apple.com/kb/HT1937, there are two official carriers in Mexico (Movistar and Telcel) and neither carrier offers an unlocked phone.

Problem with tables -- need help!

I am having problems with table formatting, when using
Preformatted text. The tables look fine in the WYSIWYG editor, but
have lots of extra space above and below the text when looking at
the output files.
I will attach the code from one of the HTML files from my
project, so you can see what I'm talking about.
Thanks.

Well, if you're talking about the single-celled table with
the line:
<p class=Preformatted>[assembly:
Ace.AceAssembly]</p>
</pre>
... you can eliminate the <P> tags. that will give you
one line less. Otherwise, your remaining space is the result of the
<PRE> tag. It, like the <XMP> tag, gives it one line of
space beneath as well.
Your alternative beyond that would be to, when needed, wrap
up the script in Javascript. That line, for instance, wouldn't need
it.

URGENT Problem with Greek Character from an Oracle database

Hello, I am having a serious and urgent problem with the character settings of an oracle database (8.1.7). The database is sitting in a solaris unix server and when we run the env command we have the following in the NLS_LANG parameter: AMERICAN_AMERICA.WE8ISO8859P1 (I do not know if this is helpful). When I retrieve data from oracle database (through a VB.NET 2005 program)to a dataset I use a special font in order to see the greek characters (HELLASARIAL). But when I am trying to save these data to a TXT file the greek characters are like Chinese to us. I tried several encodings (System.Text.Encoding.GetEncoding(869)) but without success. Can someone tell me how to convert the oracle greek characters during the selection or during the saving to the TXT file?
Please respond as fast as you can.
Thanks in advance

Here is the answer of the microsoft:
I have the information that you have a VB.Net 2005 application connected to an Oracle database 8.1.7.4 hosted on a UNIX server.
This database has the CharacterSet WE8ISO8859P1.
When retrieving Greek characters from this database in the application, you cannot see them.
Could you please send me a screenshot of these characters in the .Net application?
Are they displayed as gibberish, or as inverted questions marks (?)?
I already had similar cases with Hebrew characters hosted on an Oracle database.
These characters were displayed as questions marks on the client side.
This is due to the fact that System.Data.OracleClient is using the Server CharacterSet to display the characters.
If your Greek characters are not stored in the WE8ISO8859P1 characterset, then they won’t display correctly on the client-side.
This is different from OLEDB where you could interact on client side by modifying the NLS_LANG parameter in the registry HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOME0.
The client NLS_LANG and the server CharacterSet had to match in order to correctly display the data, and avoid SQL*NET conversion.
So there are two solutions to your case:
- The first one is to create a new database using the P8 characterset. The Oracle .Net managed provider will so be able to use it and display the characters correctly.
- The second one is to use the OLEDB.Net managed provider, and then use OLEDB for Oracle provider. OLEDB will take care of the client NLS_LANG registry parameter.
Would it be possible to test your application against an Oracle database with WE8ISO8859P8 characterset?
Would it be possible to test it with the OLEDB .Net managed provider, and after checking the NLS_LANG client registry parameter?

Very Urgent - Problem in showing JPopupMenu using 1.4 plugin

Hello ,
I have a very different problem with JPopupMenu. I have developed a new PopupMenu extending the MetalComboPopup used by the MetalComboBoxUI. I have registered with the JPopupMenu for the callback methods popupMenuWillBecomeVisible && Invisible(). I have an applet which instantiates (3 instances) my JComboBox. When I run the applet using the JDK1.4 plugin, when I click the second JComboBox, the first and the second JComboBox's popups appear at the same time. I am unable to suppress the popup (i.e Only one popup should appear at a time).
Can anybody help me out in this issue.
If you have a solution you can email to me -> [email protected] /
[email protected]
Thankx in advance,
SS

Did you try changing the driver then?
Please use Oracle's thin driver instead of the oci driver.
There are many advantages of using the type 4 driver. the first and foremost being that it does not require oracle client side software on your machine. Therefore no enteries to be made in tnsnames.ora
The thin driver is available in a jar called classes112.zip the class which implements the thin driver is oracle.jdbc.driver.OracleDriver
the connection string is
jdbc:oracle:thin:@<machine name>:1521:<sid>
please try out with the thin driver and let me know.
regards,
Abhishek.

Problem with table MBEWH

Hello SAP experts , im having a little problem with table MBEWH because the data i whant to extract isnt the correct one, i saw that this table stores all the prices for the materials and it groups them by year and by month but when i check to see what was the price for a specific material the price i had on that time periord inst the same as the one on the system, also i manage my material with baches and when i check to see if that batch was in that period of time it isnt so im really confused as to how the system saves the historical data on this table, thank you in advanced.
kind regards

read OSS note 193554 , it explains everything

Problem with Table control lines

Hi Friends,
This is the problem with table control lines:
I have screen with table control and I would like change the table control lines dynamicaly.
Exp:
In my PBO the Internal table which I am using to loop the TC is havig 7 records and its displayed with 7 records, now I have added one more record into my ITAB and now ITAB is having 8 records, when I am looping this ITAB with TC its taking the TC lines 7 only.
here is the code:
Initial values in gt_scr400 = 8
Initial values in tc_scr400 = 8
Now added one more recor into gt_scr400 , now gt_scr400 = 9.
LOOP AT   gt_scr400
       INTO wa_scr400
       WITH CONTROL tc_scr400
       CURSOR tc_scr400-current_line.
ENDLOOP.
I have used this logic :
DESCRIBE TABLE gt_scr400 LINES g_rec_300 .
tc_scr300-lines = g_rec_300.
but its not modifying the lines in my table control.
How to change the TC lines based on ITAB total records.
Thanks,
Sridhar

there is a field in TableViewName-xxx
don't remember the exact field name for (total no of records)
you can check it in debug. when you add records in Internal table, u need to modify this field which is set at the first time when table control is populated.

Problem with table paging [PDK for NET]

Hi All,
I have a problem with table paging in PDK for .NET (ver 2).
The Table has 14 visible rows.
The lead selection is set to "SINGLE"
When the user selects a row I can use
Table1.SelectedKeys(0) Mod Table1.VisibleRowCount
in order to get the info of the selected row.
If I will page using the "Prev/Next" page of the Table UI element it will also work.
However, when I press "Prev/Next" item and then select a row it chooses the wrong row.
(See picture: http://img509.imageshack.us/img509/3882/table5tq.jpg)
What can I do in order to solve the problem?
Thanks,
Omri

Hi Omri,
how are you doing ?
The SAPTable is similar to a DataGrid control and need to be bound to the datasource on every postback
a good idea is to keep the dataset available in the page or on the server ( so that you dont need to keep making expensive fetch operations
The selected row is affected by the recordset (dataset) and needs additional programming
A work around for the selected row issue is to save it in a server side hidden variable (or anything that will persist) and read and set the value in the page / next button handler
with respect,
amit

Bex analyzer - internal error problem with table c_t_variable

HI All,
When ever I try to refresh a query in Bex-Analyzer ,Iam getting "internal error problem with table c_t_variable".
Please advise
Edited by: Aparna Duvvuri on Jan 13, 2010 10:53 AM

Hi Aparna,
try to open the query in RSRT and debug the query.the error is due to some customer exit variable so try to debug the code for the variable and rectify it.
Thanks,
Ashok

Error "DATABASE PROBLEMS WITH TABLE MC11VA0HDRSETUP"

Hi Friends,
I got the following message when am trying to delete the setup tables.
" Error DATABASE PROBLEMS WITH TABLE MC11VA0HDRSETUP"
Am trying to delete the setup tables for application '11', but it gives me the above error. I have gone throug similar threads but it did not solve my issue.
Please can anyone provide a solution.
system detials:
R/3 release    - 4.6c
PI                 - 2004_1_46c
SAP_BW      - 30B
PI_BASIS     - 2003_1_620
Any information will be appreciated
Thanks,
VBR

Hi Kishor,
Thanks for your reply.
I have gone through that SAP Note 456102 and it was not of much help for our issue because we are ahead of PI that is mentioned in the note.
Can you send your email id so that i can forward the error screenshots.
Regards,
VBR

Very Urgent - Problem with Table MSEG

Similar Messages

Maybe you are looking for