( very urgent ) read data from bw to live cache

hi,
i am very mew to APO LIVE CACHE. i need to read the data from BW to LIVE CACHE for forecasting. i now the transaction lc10 and lc11. but the problem is i need to know where i have to give the BW cubes or BW information into LIVECACHE.
WOULD APPRECIATE UR HELP.
RGS,
SUGUNA.S

Try TCode/SAPAPO/TSCUBE or Program /SAPAPO/RTSINPUT_CUBE
Regards
Krishna Chaitanya.P

Similar Messages

Very very urgent. population data from database into dropdownbox

Hi,
i imported a model through ejbs
this is to create new entries into database ,
and my scenerio iso now i need to populate the values that i stored into database thro EJBS in a drop down box of wd application.
plz help me through code ,i am new to java webdynpro...
neede very urgently,
Thanx .
Arjun.G
Message was edited by:
arjun swamy

Hi,
Have a look at these threads
Dropdown by index in table - fetching values from database
Dropdown by index
Kind Regards,
Saravanan K

Very urgent: reterving data from table MKPF table

hi,
i am facing a problem in adding a code i.e. i am having a select statement which use to reterive data from MKPF but i am not able to fetch it as there,i had written code for the RSEG from where i get the Material Document No..
but now i have to take the value from the MKPF as well as it is the requierment of the code.
here is the following code which i am using right now is to reterive data from RSEG :-
SELECT BUKRS BELNR GJAHR AWKEY BUDAT XBLNR
AWTYP   FROM BKPF
INTO (ITBKPF-BUKRS,ITBKPF-BELNR,ITBKPF-GJAHR,
ITBKPF-AWKEY,ITBKPF-BUDAT,ITBKPF-XBLNR,ITBKPF-AWTYP)
WHERE AWTYP EQ 'MKPF' OR AWTYP EQ 'RMRP'.
**BEGIN OF TRY CODE FOR A MATERIAL DOCUMENT**
    ITDEMO-BELNR = ITBKPF-AWKEY(10).
    ITDEMO-GJAHR = ITBKPF-AWKEY+10(4).
    ITDEMO-XBLNR = ITBKPF-XBLNR.
    SELECT LFBNR FROM RSEG INTO
    (ITDEMO-LFBNR) WHERE
    BELNR EQ ITBKPF-AWKEY(10) AND
    GJAHR EQ ITBKPF-AWKEY+10(4) AND
    XBLNR EQ ITBKPF-XBLNR AND LFBNR > 0.
CHECK SY-SUBRC EQ 0 AND ITDEMO-LFBNR IN P_LFBNR.
**END OF TRY CODE FOR A MATERIAL DOCUMENT**
Edited by: abaper2008 on Jun 10, 2008 7:42 AM

hi,
i had deveoped a code for it,is correct or not?
DATA: BEGIN OF ITBKPF OCCURS 0,
      BUKRS LIKE BKPF-BUKRS,
      BELNR LIKE BKPF-BELNR,
      GJAHR LIKE BKPF-GJAHR,
      AWKEY LIKE BKPF-AWKEY,
      BUDAT LIKE BKPF-BUDAT,
      XBLNR LIKE BKPF-XBLNR,
      AWTYP LIKE BKPF-AWTYP,
      END OF ITBKPF.
DATA: BEGIN OF ITDEMO OCCURS 0,
      BELNR LIKE RSEG-BELNR,
      GJAHR LIKE RSEG-GJAHR,
      LFBNR LIKE RSEG-LFBNR,
      XBLNR LIKE RSEG-XBLNR,
      END OF ITDEMO.
*******TABLE MKPF - FOR MATERIAL DOCUMENT*********
DATA: BEGIN OF ITDEMO1 OCCURS 0,
      MBLNR LIKE MKPF-MBLNR,
      MJAHR LIKE MKPF-MJAHR,
      XBLNR LIKE MKPF-XBLNR,
      END OF ITDEMO1.
START-OF-SELECTION.
BKPF
    SELECT BUKRS BELNR GJAHR AWKEY BUDAT XBLNR AWTYP
    FROM BKPF
    INTO (ITBKPF-BUKRS,ITBKPF-BELNR,ITBKPF-GJAHR,         ITBKPF-AWKEY,ITBKPF-BUDAT,ITBKPF-XBLNR,ITBKPF-AWTYP)
    WHERE AWTYP EQ 'MKPF' OR AWTYP EQ 'RMRP'.
MKPF
*BEGIN OF TRY CODE FOR A MATERIAL DOCUMENT*
**begin- for bsis to be reterived**
IF ITBKPF-AWTYP EQ 'MKPF'.
    ITDEMO1-MBLNR = ITBKPF-AWKEY(10).
    ITDEMO1-MJAHR = ITBKPF-AWKEY+10(4).
    ITDEMO1-XBLNR = ITBKPF-XBLNR.
    SELECT SINGLE MBLNR FROM MKPF INTO (ITDEMO1-MBLNR)
    WHERE MBLNR EQ ITBKPF-AWKEY(10)
    AND MJAHR EQ ITBKPF-AWKEY+10(4) AND XBLNR > 0.
CHECK SY-SUBRC EQ 0 AND ITDEMO1-MBLNR IN P_LFBNR.
**end - for bsis to be reterived**
ELSE.
    ITDEMO-BELNR = ITBKPF-AWKEY(10).
    ITDEMO-GJAHR = ITBKPF-AWKEY+10(4).
    ITDEMO-XBLNR = ITBKPF-XBLNR.
    SELECT LFBNR FROM RSEG INTO
    (ITDEMO-LFBNR) WHERE
    BELNR EQ ITBKPF-AWKEY(10) AND
    GJAHR EQ ITBKPF-AWKEY+10(4) AND
    XBLNR EQ ITBKPF-XBLNR AND LFBNR > 0.
CHECK SY-SUBRC EQ 0 AND ITDEMO-LFBNR IN P_LFBNR.
END OF TRY CODE FOR A MATERIAL DOCUMENT**
APPEND ITDEMO1.
EXIT.
ENDSELECT.
ENDIF.
APPEND ITDEMO.
EXIT.
ENDSELECT.
APPEND ITBKPF.
ENDSELECT.
Edited by: abaper2008 on Jun 10, 2008 10:19 AM

Urgent help with simple BPEL process for reading data from database

Hello there,
I need help with BPEL project.
i have created a table Employee in Database.
I did create application, BPEL project and connection to the database properly using Database Adapter.
I need to read the records from the database and convert into xml fomat and it should to go approval for BPM worklist.
Can someone please describe me step by step what i need to do.
Thx,
Dps

I have created a table in Database with data like Empno,name,salary,comments.
I created Database Connection in jsp page and connecting to BPEL process.
It initiates the process and it goes automatically for approval.
Please refer the code once which i created.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<%@page import="java.util.Map" %>
<%@page import="com.oracle.bpel.client.Locator" %>
<%@page import="com.oracle.bpel.client.NormalizedMessage" %>
<%@page import="com.oracle.bpel.client.delivery.IDeliveryService" %>
<%@page import="javax.naming.Context" %>
<%@page import="java.util.Hashtable" %>
<%@page import="java.util.HashMap" %>
<%@ page import="java.sql.*"%>
<%@ page import= "jspprj.DBCon"%>
<html>
<head>
<title>Invoke CreditRatingService</title>
</head>
<body>
<%
DBCon dbcon=new DBCon();
Connection conn=dbcon.createConnection();
Statement st=null;
PreparedStatement pstmt=null;
Hashtable env= new Hashtable();
ResultSet rs = null;
Map payload =null;
try
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.evermind.server.rmi.RMIInitialContextFactory");
env.put(Context.PROVIDER_URL, "opmn:ormi://localhost:port:home/orabpel");//bpel server
env.put("java.naming.security.principal", "username");
env.put("java.naming.security.credentials", "password");//bpel console
Locator locator = new Locator("default","password",env);
IDeliveryService deliveryService =
(IDeliveryService)locator.lookupService(IDeliveryService.SERVICE_NAME );
// construct the normalized message and send to Oracle BPEL Process Manager
NormalizedMessage nm = new NormalizedMessage();
java.util.HashMap map = new HashMap();
st=conn.createStatement();
out.println("connected");
String query1="Select * from EMPLOYEE";
rs=st.executeQuery(query1);
/*reading Data From Database and converting into XML format
so that no need of going to BPEL console and entering the details.
while (rs.next()){
String xml1 = "<AsynchBPELProcess1ProcessRequest xmlns='http://xmlns.oracle.com/AsynchBPELProcess1'>"+
"<Empno>"+rs.getString(1)+"</Empno>"+
"<EmpName>"+rs.getString(2)+"</EmpName>"+
"<Salary>"+rs.getString(3)+"</Salary>"+
"<Comments>"+rs.getString(4)+"</Comments>"+
"</AsynchBPELProcess1ProcessRequest>";
out.println(xml1);
nm.addPart("payload", xml1 );
// EmployeeApprovalProcess is the BPEL process in which human task is implemented
deliveryService.post("EmployeeApprovalProcess", "initiate", nm);
// payload = res.getPayload();
out.println( "BPELProcess CreditRatingService executed! " );
// out.println( "Credit Rating is " + payload.get("payload") );
//Incase there is an exception while invoking the first server invoke the second server i.e lsgpas13.
catch(Exception ee) {
//("BPEL Server lsgpas14 invoking error.\n"+ee.toString());
%>
</body>
</html>
Its working fine.And i want it for Bulk approvals.please help me step by step procedure if any other way to implement this.

TcpListener not working on Azure: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host

Hi Everybody,
i'm playing a little bit with Windows Azure and I'm blocked with a really simple issue (or maybe not).
I've created a Cloud Service containing one simple Worker Role. I've configured an EndPoint in the WorkerRole configuration, which allows Input connections via tcp on port 10100.
Here the ServiceDefinition.csdef file content:
<?xml version="1.0" encoding="utf-8"?>
<ServiceDefinition name="EmacCloudService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition" schemaVersion="2014-01.2.3">
<WorkerRole name="TcpListenerWorkerRole" vmsize="Small">
<Imports>
<Import moduleName="Diagnostics" />
<Import moduleName="RemoteAccess" />
<Import moduleName="RemoteForwarder" />
</Imports>
<Endpoints>
<InputEndpoint name="Endpoint1" protocol="tcp" port="10100" />
</Endpoints>
</WorkerRole>
</ServiceDefinition>
This WorkerRole is just creating a TcpListener object listening to the configured port (using the RoleEnvironment instance) and waits for an incoming connection. It receives a message and returns a hardcoded message (see code snippet below).
namespace TcpListenerWorkerRole
using System;
using System.Net;
using Microsoft.WindowsAzure.ServiceRuntime;
using System.Net.Sockets;
using System.Text;
using Roche.Emac.Infrastructure;
using System.IO;
using System.Threading.Tasks;
using Microsoft.WindowsAzure.Diagnostics;
using System.Linq;
public class WorkerRole : RoleEntryPoint
public override void Run()
// This is a sample worker implementation. Replace with your logic.
LoggingProvider.Logger.Info("TcpListenerWorkerRole entry point called");
TcpListener listener = null;
try
listener = new TcpListener(RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
LoggingProvider.Logger.Info(string.Format("TcpListener started at '{0}:{1}'", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Address, RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Port));
catch (SocketException ex)
LoggingProvider.Logger.Exception("Unexpected exception while creating the TcpListener", ex);
return;
while (true)
Task.Run(async () =>
TcpClient client = await listener.AcceptTcpClientAsync();
LoggingProvider.Logger.Info(string.Format("Client connected. Address='{0}'", client.Client.RemoteEndPoint.ToString()));
NetworkStream networkStream = client.GetStream();
StreamReader reader = new StreamReader(networkStream);
StreamWriter writer = new StreamWriter(networkStream);
writer.AutoFlush = true;
string input = string.Empty;
while (true)
try
char[] receivedChars = new char[client.ReceiveBufferSize];
LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
LoggingProvider.Logger.Info("This is what the host sent to you: " + input+". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
break;
catch (Exception ex)
LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
break;
}).Wait();
public override bool OnStart()
// Set the maximum number of concurrent connections
ServicePointManager.DefaultConnectionLimit = 12;
DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString");
RoleEnvironment.Changing += RoleEnvironment_Changing;
return base.OnStart();
private void RoleEnvironment_Changing(object sender, RoleEnvironmentChangingEventArgs e)
// If a configuration setting is changing
LoggingProvider.Logger.Info("RoleEnvironment is changing....");
if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))
// Set e.Cancel to true to restart this role instance
e.Cancel = true;
As you can see, nothing special is being done. I've used the RoleEnvironment.CurrentRoleInstance.InstanceEndpoints to retrieve the current IPEndpoint.
Running the Cloud Service in the Windows Azure Compute Emulator everything works fine, but when I deploy it in Azure, then I receive the following Exception:
2014-08-06 14:55:23,816 [Role Start Thread] INFO EMAC Log - TcpListenerWorkerRole entry point called
2014-08-06 14:55:24,145 [Role Start Thread] INFO EMAC Log - TcpListener started at '100.74.10.55:10100'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Client connected. Address='196.3.50.254:51934'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Buffer size: 65536
2014-08-06 15:06:45,491 [9] FATAL EMAC Log - Unexpected exception while Reading the request
System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
--- End of inner exception stack trace ---
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
at System.IO.StreamReader.ReadBuffer(Char[] userBuffer, Int32 userOffset, Int32 desiredChars, Boolean& readToUserBuffer)
at System.IO.StreamReader.Read(Char[] buffer, Int32 index, Int32 count)
at TcpListenerWorkerRole.WorkerRole.<>c__DisplayClass0.<<Run>b__2>d__0.MoveNext() in C:\Work\Own projects\EMAC\AzureCloudEmac\TcpListenerWorkerRole\WorkerRole.cs:line 60
I've already tried to configure an internal port in the ServiceDefinition.csdef file, but I get the same exception there.
As you can see, the client can connect to the service (the log shows the message: Client connected with the address) but when it tries to read the bytes from the stream, it throws the exception.
For me it seems like Azure is preventing the retrieval of the message. I've tried to disable the Firewall in the VM in Azure and the same continues happening.
I'm using Windows Azure SDK 2.3
Any help will be very very welcome!
Thanks in advance!
Javier
En caso de que la respuesta te sirva, porfavor, márcala como válida
Muchas gracias y suerte!
Javier Jiménez Roda
Blog: http://jimenezroda.wordpress.com

hi Javier,
I changed your code like this:
private AutoResetEvent connectionWaitHandle = new AutoResetEvent(false);
public override void Run()
TcpListener listener = null;
try
listener = new TcpListener(
RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
catch (SocketException se)
return;
while (true)
IAsyncResult result = listener.BeginAcceptTcpClient(HandleAsyncConnection, listener);
connectionWaitHandle.WaitOne();
The HandleAsync method is your "While (true)" code:
private void HandleAsyncConnection(IAsyncResult result)
TcpListener listener = (TcpListener)result.AsyncState;
TcpClient client = listener.EndAcceptTcpClient(result);
connectionWaitHandle.Set();
NetworkStream netStream = client.GetStream();
StreamReader reader = new StreamReader(netStream);
StreamWriter writer = new StreamWriter(netStream);
writer.AutoFlush = true;
string input = string.Empty;
try
char[] receivedChars = new char[client.ReceiveBufferSize];
// LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
// LoggingProvider.Logger.Info("This is what the host sent to you: " + input + ". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
// LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
catch (Exception ex)
//LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
Please try it. For this error message, I suggest you could refer to this thread (http://stackoverflow.com/questions/6173763/using-windows-azure-to-use-as-a-tcp-server
) and this post (http://stackoverflow.com/a/5420788).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to Read Data from a table (horizontal axsis) in an existing report

Hi to all,
I've a question. I must read the data in a table of an existing report. I develope with BO XI 3.0
I don't know how to reach the table in my report from SDK.
this is my code:
reports = document.getReports();
rep = reports.getItem(0);
the report has the title and a table horizontal axsis.
I must read the column name(header column) of the table and all rows for retrieving values.
Thank u in advance for your attention.

hi ChinMay,
thank u for your answer.
I would like to ask u if Ireport refers crystal reports, while i mean to read data from a webi report.
I've tried in many manners to read this data and i've read the SDK, but i'm unable to reach the table of my report for reading its rows. i'm able to export in XML format, i'm able to get reportelement , block, but in the java's example of SDK its not present how to obtain the reportbody and subsequently the section or directly a table. the example that i've seen show that if u create a new report u can create the reportbody, the section, the table and others. But don't show how to obtain this from an existing report.
Probably i don't understand very well all the SDK structure and i think that is possbile to read a table(with horizantal axis) in a report without section only passing by the ReportBody.
I know that u don't have so time to spent for things that are in the SDK, but if it's possible to have ten rows of sample about this question i'll be very happy.
If it's not possibile, thank u very much for your interesting and disponbility and i'll try again and again and again to solve this.
Matteo

Error in Reading data from a xml file in ESB

Hi,
i created a inbound file adapter service which reads data from a xml file and passes it to the routing service and from there updates to the database.....
(everything created in jdeveloper)
But i am getting error....it is not getting updated to the database...when i check the database(select * from table) its showing one row selected but i couldnt find the data....
Transformation mapping also i did...
i think may be some error in reading the data from the xml file but not so sure.....
please reply to this mail as soon as possible its very urgent

Michael R wrote:
The target table will be created when you execute the interface, if you set the option on the flow tab as instructed in step #6 of the "Setting up ODI Constraint on CLIENT Datastore" Section.
Option Value
CREATE_TARG_TABLE trueHi Michel,
This was not my required answer.I am sorry that I was unable to clarify my question.Actually
+This project executed successfully with some warning.Target Table is automatically created in database and also populated with data.But when I right-click Target Datastore(in >Mapping Tab of the Interface), and then select Data to View Data that needs to be inserted in the target table.I get some error like this:-...+This above line is the result of my project my problem is
when I right-click Target Datastore(in Mapping Tab of the Interface), and then select Data to View Data that already inserted in the target table.Is not shown by the view data operation.
I meant to say I am facing this error
At the10(1010 written) step of
Creating a New ODI Interface to Perform XML File to RDBMS Table Transformation
wehre it says
Open the Interface tab. Select Mapping tab, right-click Target Datastore - CLIENT, and then select Data. View Data inserted in the target table. Close Data Editor. Close the tabs...
In my case when I use my sqldeveloper I can see data successfully inserted in my target table and also in error table (data that can't satisfy the constraint) .But I was unable to check this by following the above mentioned 10 th step and got this error.
Thanks

SQL Server 2012 64 bit - reading data from dbf (DBase 3/4/5 or VFoxPro) - solution and examples

It took me quite a while to find a solution that will enable me to read dbf files from 64 bit SQL server, so i decided to create this guide for all of you guys searching for an answer.
Download and install Access Database Engine 64 bit : http://www.microsoft.com/en-us/download/details.aspx?id=13255
Creating Linked server for me is the most elegant solution
To create a Linked Server modify following sql statement with your data and execute it:
EXEC master.dbo.sp_addlinkedserver
@server = N'DBFServer',
@srvproduct=N'',
@provider=N'Microsoft.ACE.OLEDB.12.0',
@datasrc=N'D:\DBF\',
@provstr=N'dBASE IV'
You can read data directly without linked server, but i find this less elegant
To read data directly modify following sql statement with your data and execute it:
Use KTCDB
GO
sp_configure 'show advanced options', 1
reconfigure
GO
sp_configure 'Ad Hoc Distributed Queries', 1
reconfigure
GO
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.12.0' , N'AllowInProcess' , 1;
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.12.0' , N'DynamicParameters' , 1;
SELECT * FROM OPENROWSET('Microsoft.ACE.OLEDB.12.0',
'dBASE IV;Database=D:\DBF\;',
'SELECT * FROM ODMRAD')
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.12.0' , N'AllowInProcess' , 0;
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.12.0' , N'DynamicParameters' , 0;
GO
sp_configure 'Ad Hoc Distributed Queries', 0
reconfigure
GO
sp_configure 'show advanced options', 0
reconfigure
GO
I hope this will help you guys avoid frustration and wasting lots of time.

Visakh, i believe you are mixing terms 'reading' and 'importing', as with solution i proposed you can consume 'live' data without the need to
import it on every change.
To clarify : Data in DBF's can change at any point in time, and with my solution whenever you try to read data from either linked server or directly, you will always have most recent data, contrary to the import methods where you are cloning data and actually
could run into many problems synchronizing original and cloned data.
Ok..I understand that
Based on your data volatility you can configure an automated job for executing SSIS package to extract latest of data from dbase. But again it wont be "in real time". There will be slight delay depending on frequency you choose for job.
I was suggesting it more from a datawarehousing perspective whether data refresh happens only after predefined period (daily,6hrs etc)
If requirement is to get realtime data when you desire then definitely linked server would be the way to go.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Read data from E$ table and insert into staging table

Hi all,
I am a new to ODI. I want your help in understanding how to read data from an "E$" table and insert into a staging table.
Scenario:
Two columns in a flat file, employee id and employee name, needs to be loaded into a datastore EMP+. A check constraint is added to allow data with employee names in upper case only to be loaded into the datastore. Check control is set to flow and static. Right click on the datastore, select control and then check. The rows that have violated the check constraint are kept in E$_EMP+ table.
Problem:
Issue is that I want to read the data from the E$_EMP+ table and transform the employee name into uppercase and move the corrected data from E$_EMP+ into EMP+. Please advise me on how to automatically handle "soft" exceptions in ODI.
Thank you

Hi Himanshu,
I have tried the approach you suggested already. That works. However, the scenario I described was very basic. Based on the error logged into the E$_EMP table, I will have to design the interface to apply more business logic before the data is actually merged into the target table.
Before the business logic is applied, I need to read each row from the E$EMP table first and I do not know how to read from E$EMP table.

Reading data from another clients network connection

I would like anyone who know to direct me to some resources for how one could write code that can read data from a port without "binding" to it. In other words, I have an application running on windows talking to a server. I want to monitor that conversation with a separate java application. This is a simple sort of a firewall.
Is there a java api available, or a part of a package that can do this? So far, I have only seen information on binding to a port, which prevents the client from running at the same time as my java application.
Thanks very much in advance.

The simplest way to implement this is to create a proxy. The client connects to your proxy and your proxy connects and forward all data. Montioring this is then trivial.
You could snoop the network, but I don't know and easy way to this in Java. Perhaps google has something.

Reading data from dynamically from different file.

Is there any function moudle or class to read data from a file in application layer, whoes structure is changing dynamically.
Urgent....... Can any one help me out in this......
Thanks in advance....
Thanks,
feroz.

Hi Feroz,
Do u mean that structure of the file on the application server is changing dynamically.
The following is the FM to read data from a file on Application Server.
OPEN DATASET FNAME FOR INPUT in text mode encoding default.
LOOP AT TAB INTO WA.
READ DATASET FNAME INTO WA.
IF SY-SUBRC 0.
EXIT.
ENDIF.
WRITE: / WA-COLUMN1, WA-COLUMN2.
ENDLOOP.
This is the FM to search the file on Application Server.
F4_DXFILENAME_TOPRECURSION
Regards,
Sai
Edited by: Sai Krishna Kowluri on Jul 15, 2008 9:45 AM

Extractor for payroll reads data from cluster PCL2?

Hello all,
This is the line from help.sap in payroll extractor.
"The extractor for payroll results reads data from payroll cluster PCL2, not from standard tables."
Can someone explain to me what do we have to understand from that, and where in R/3 do we have to go and check for data.
Thanks in advance.

Anytime some of last information does not upload in delta to BW from payroll because payroll has a process to close it had to be executed (or something like that (sorry, i haven't enough funcional HR knoledge), it happened to me anytime).
But, surely the user that you are using for extraction has no enought rights or authorizations.
Look at these notes
397208 **** very important!!!
672514
964569
329961
585682

Gurus..need help in reading data from virtual infocube

Gurus,
I have to read data from an virtual infocube...I am trying to use FM RSDRI_INFOPROV_READ to read data but it doesn't work..
I am doing exactly what has been done in the demo program RSDRi_INFOPROV_READ_DEMO...
Please help me...its really URGENT...
Thanks
sam

Check out this thread....
must be helpful
Re: Read data from 0BWTC_C02 via ABAP

Read data from picture

i would liek to read data from a picture in form of numbers,
the picture is of a light spot so the numbers are high in the centre where the spot is concentrated,
what i would like to do is get a gradient in x and y of the max point , and then plot this gradiant in an intensity graph for both x vs mm and y vs mm.
any tips?

Hi,
I believe that the gradient at any given point will be a vector of the gradient in each dimension so i would have thought that you could use the standard differential VIs and find the gradient a row at a time in the x and then the y direction. Is this what you are after? Im afraid that my matricies maths isn't coming back to me very well so I'm not sure if there is a function to do it with these a but none of them jumped out at me.
Regards,
James Mc
========
CLA and cRIO Fanatic
wiresmithtech.com/blog

Read data from cluster tables

Hi,
I met a problem.
How to read data from cluster tables using:
b2-key-pernr = 20.
b2-key-pabrj = 2006.
b2-key-pabrp = 09.
b2-key-cltyp = '1'.
import saldo from database pcl2(b2) id b2-key.
the problem is that the sy-subrc is always 4, could anyone help me?
thank you very much!

Hi,
Import and export to database is used in two programs and not in the same program.
ZPROGRAM1.
tables : indx.
Data : SALDO type i,
indxkey LIKE indx-srtfd VALUE 'ZAB1'.
indx-aedat = sy-datum.
indx-usera = sy-uname.
indx-pgmid = sy-repid.
EXPORT SALDO TO DATABASE indx(zc) ID indxkey.
In another program,
ZPROGRAM2.
tables : indx.
Data : SALDO type i,
indxkey LIKE indx-srtfd VALUE 'ZAB1'.
indx-aedat = sy-datum.
indx-usera = sy-uname.
indx-pgmid = sy-repid.
IMPORT SALDO FROM DATABASE indx(zc) ID indxkey.
Best regards,
Prashant

( very urgent ) read data from bw to live cache

Similar Messages

Maybe you are looking for