Very Urgent!!! Unable to install NW2004S - PI ; asking SOLMON key ?

Hi Experts!!
I am trying to install SAP NW2004S PI, I am struck in the middle. Its asking Solution manager Key. I provided the key but still its not accepting. Could anyone please let me know how to resolve this issue. If you have generated any SOLOMON key pls let me know.
Thanks and regards,
Sunil

Hai don't mention any time "hai expert" ok....
so your problem not installing properly first you check below steps
1.Are you given right hostname in C:\WINDOWS\system32\drivers\etc directory
2.check it is pinging or not and similarly check it sid
3.Are you generating the SOLMAN Key must and should mention the sid in caps and hostname is in what you are mention in etc directory
4.After these three steps you are unable to install sent me your SID and HOSTNAME i will generate the solman key
Remaind solman key is freely available from SAP market place.
If any quaries forward message.

Similar Messages

Very urgent need to install 9.2.0.5 on IBM pSeries!!

Hi All,
This is very urgent requirement for me that I need to install 9.2.0.5 on IBM pSeries AIX V5.3 LPAR configured with HACMP.Is there any precution need to make before installation? and what is "LPAR configured with HACMP".
I mean if you describe "LPAR configured with HACMP" the the task become simple.your advise is highly appriciated.
lot's of thatnks to you.

My reply to this post is a pure guess and is based on my experience on VMware tool.
LPAR is a tool which helps you put many OSes on a single Hardware, allowing to run all of them at the same time. Basically all the OSes will share the hardware resources.
This saves the hardware cost for the company and helping utilize the same hardware more effectively. Again, each OS will act as an independent machine (lets call it Virtual Machine), users can specifically connect to this virtual machine istead of connecting to the host machine.
In your case LPAR has one of the OS as AIX V5.3.
So, probably your task is to Install Oracle 9.2.0.5 on the OS AIX V5.3.
Hope it helps.

Very Urgent Unable to Launch Application using Web Start using JDK 1.4.2

Hi all
I am very serious issue i have ejb client swing application that uses
RMI to contact a session bean deployed in JBoss now i want the client app to be installed in the client machine using web start . Also i understand i require security permission to access network resources. so i have signed all the JAR files with same certificate created using self certificate avialiable in JDK by default also in the JNLP file in have included the following tag
<security>
<all-permissions/>
</security>
Now when I launch my application using Web start it gives an error that " Unsigned application is trying to access local resources"
I unable to understand what could be the problem . Please help me with the steps to be followed where in client should be able to RMI call to the server
Thanks in Advance
Naveen

You may have tried this already, but you might have to sign the jars via command line, outside any export process from your IDE.
$ jarsigner {filename}.jar {key from keystore}
I also had problems using webstart and RMI through an RCP
Ben

Unable to start IDC Content Service(Very Urgent)

Hi,
My local system has Windows XP.I have installed Oracle 10g Express Edition,Apache,has jre1.6.0_03 and run the UCM installer.Both IDC Content Admin Service and IDC Content Service are set to start automatically during installation time."IDC Content Admin Service" is getting started automatically but "IDC Content Service" is not getting started.It is getting the following Error Message when we are starting IDC Content Service
Error 1064 : An exception occured in the service when handling the Control Request.
I have already installed Oracle Database 10g and D2k 10g also on my local system.
i am getting following error in the log file
Failed to initialize the server. Unable to initialize the system provider 'SystemDatabase'. Unable to create database connection for the database 'SystemDatabase' with connection string 'jdbc:oracle:thin:@localhost:1521:xe'. Please make sure that the connection string, user and password are correct. Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:xe
Unable to create database connection for the database 'SystemDatabase' with connection string 'jdbc:oracle:thin:@localhost:1521:xe'. Please make sure that the connection string, user and password are correct. Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:xe
java.sql.SQLException: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:xe [ Details ]
A fatal error has occurred. The stack trace below shows more information.
!csFailedToInitServer!csProviderUnableToInitialize,SystemDatabase!csJdbcUnableToCreateConnection,SystemDatabase,jdbc:oracle:thin:@localhost:1521:xe!$Listener refused the connection with the following error: ORA-12505\, TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: localhost:1521:xe !csJdbcUnableToCreateConnection,SystemDatabase,jdbc:oracle:thin:@localhost:1521:xe!$Listener refused the connection with the following error: ORA-12505\, TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: localhost:1521:xe !syExceptionType2,java.sql.SQLException,Listener refused the connection with the following error: ORA-12505\, TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: localhost:1521:xe 
intradoc.common.ServiceException: !csProviderUnableToInitialize,SystemDatabase!csJdbcUnableToCreateConnection,SystemDatabase,jdbc:oracle:thin:@localhost:1521:xe!$Listener refused the connection with the following error:
ORA-12505\, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:xe
 at intradoc.server.IdcSystemLoader.loadProviders(IdcSystemLoader.java:1949)
 at intradoc.server.IdcSystemLoader.initProviders(IdcSystemLoader.java:1729)
 at intradoc.server.IdcSystemLoader.finishInit(IdcSystemLoader.java:221)
 at intradoc.server.IdcSystemLoader.init(IdcSystemLoader.java:185)
 at intradoc.server.IdcServerManager.init(IdcServerManager.java:73)
 at IdcServerNT.init(IdcServerNT.java:86)
 at IdcServerNT.main(IdcServerNT.java:54)
Caused by: intradoc.data.DataException: !csJdbcUnableToCreateConnection,SystemDatabase,jdbc:oracle:thin:@localhost:1521:xe!$Listener refused the connection with the following error:
ORA-12505\, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:xe
 at intradoc.jdbc.JdbcConnectionUtils.getConnection(JdbcConnectionUtils.java:88)
 at intradoc.jdbc.JdbcWorkspace.init(JdbcWorkspace.java:97)
 at intradoc.provider.Provider.init(Provider.java:68)
 at intradoc.server.IdcSystemLoader.loadProviders(IdcSystemLoader.java:1937)
 ... 6 more
Caused by: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:xe
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:261)
 at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
 at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:441)
 at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
 at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
 at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
 at java.sql.DriverManager.getConnection(DriverManager.java:525)
 at java.sql.DriverManager.getConnection(DriverManager.java:171)
 at intradoc.jdbc.JdbcConnectionUtils.getConnection(JdbcConnectionUtils.java:70)
 ... 9 more
The Oracle Homes are different for both the Oracle.
If somebody have idea about this problem,please help me. This is very urgent.
Manoj Baghel
[email protected]

I think so..
Your Oracle Database doesn't connect to content server..
Maybe, you can edit the configuration of your UCM..
Please open the file at C:\oracle\ucm\server\config\config.cfg..
And then add the code :
NumConnection = 5;
CMIIW

I am unable to install itunes. I get the pop-up asking if I want to save or cancel the iTunes64 file. I click save... and then nothing happens. Help!

I am unable to install itunes. I get the pop-up asking if I want to save or cancel the iTunes64 file. I click save... and then nothing happens. Help!

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/quicktime/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Unable to Install Universal Wireless Keyboard with the CD that came with the Palm Tungsten E2 on my Windows Vista OS. Can some help? Would Appreciate it very much.

I recently bought a Palm Tungsten E2. I have been unable to install the Universal Wireless Keyboard software that came with the E2. Went online and downloaded the version 1.13 UWK and that would not install either. What did I do wrong?
Post relates to: Tungsten E2

For Vista that version will not let you install programs. Good news though is we have a version you can. Go here, http://www.palm.com/us/support/downloads/windesk62.html and install this on top of the version you already have. There is going to be a few changes on the desktop, there is no quick install, but the install tool.
Once you have that done just double click on keyboard and it will ask you your hotsync name and sync and your done.
Oh as a side note the check if this is your solution is only if the answer solves your original question.
Message back if you have more question or need more help
Post relates to: Palm Z22

I was unable to install adobe acrobat in trial version and it is asking for license agreement and then about serial. How can i resolve this problem?

i have downloaded adobe acrobat from adobe assistant and after the installation it is asking for serial number even though i opt for trial usage. how can i resolve this problem?

Maheedhararao if you are unable to install in trial mode then it is likely the trial period for that computer has expired. I would recommend evaluating the software on a different computer.

Unable to open CS5 program, ask to install Java Runtime?

Unable to open CS5 program, ask to install Java Runtime?

See if Java Runtime is available from Software Update, install it, then try launching CS5 again.

Unable to install software, it stopped almost at end and even didn´t asked for connecting USB.

product name: HP Photosmart all-in-one B010a
operation system: windows 7 64-bit
I was unable to install product, it didn´t asked me connect usb, and stopped almost at the end. I tried solve the problem with HP installation error - windows 7. I installed updates and so on, but in middle of new installing it wrote fatal error.

Hi b ,
Thanks for your response.
There were no accounts in my local security settings so I added SERVICE;Ron and it recognised them both .
To update , I decided to reboot and try the install one more time and Quicktime and itunes installed successfully , ipod appeared to but when I connect my nano I get an error message that the software didn't install correctly . I uninstalled it and reinstalled , ran ipod updater but it's still the same . When I plug in my nano itunes doesn't recognise it and I keep getting a message on my taskbar telling me that this device will run better in a USB 2.0 port but that's what I'm using !!?? . Any ideas ? .
T.I.A. Ron

URGENT!! Unable to install files to my Palm, Zire 72

Dear Sir/Madam,
I used Windows XP before. There is nothing special problem happened before. However, now I change to use Windows Vista in a new computer. I could not install anything into my Zire 72 no matter a prc or pdb files. The custom setting has shown that both Quick Install and Install are active. After synchronization, there is nothing happened to the installation issue. It even did not show any message of "installation fail" or "unable to install". Please advise how could I fix the issue. Thank you!
Regards,
John Chan
Post relates to: Zire 72

Hi, and welcome to the Palm Support Community.
There are several "stickied" threads in the upper section of this board which you should read...here, and here.
First, if your Vista computer is a 64-bit machine, you cannot sync with your USB cable because there are no USB drivers for 64-bit systems. You would have to use Infrared or Bluetooth to sync.
Next, you need to use Palm Desktop 6.2.2. You can find Windows Vista information and links to Palm Desktop at the firstthread I have linked above.
Third, you need to install PalmHotsyncSetup which you will find by going to the second thread I have linked above.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Problem with the EP6 SP10 Patch 1 Post Install (VERY URGENT)

Hello,
My installation seems to be well done.
But when I try to do the first connection on the portal, I sign-in the system and it returns errors like :
"Portal Runtime error
An exception occurred while processing a request for :
iView : pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage
Component Name : com.sap.portal.pagebuilder.pageBuilder
The exception was logged. Inform your system administrator..
Exception id: 04:29_01/02/05_0003_7226250
See the details for the exception ID in the log file"
Is there one of you who can help me to solve my problem.
It is very urgent
Thanks in advance
Regards
Humbert

Hello,
The console logs contain no information bout my problem but I looked in the directory :
e:\usr\sap\DP1\DVEBMGS00\work and here is the contain of the file std_server0.out
PatchLevel 88028.313 December 22, 2004 20:48 GMT
> service DQE ================= ERROR =================
Feb 2, 2005 11:03:28 AM ...Thread.SingleThread.run().OutOfMemory [SAPEngine_System_Thread[impl:5]_63] Fatal:
Feb 2, 2005 11:03:28 AM ...Thread.SingleThread.run().OutOfMemory [SAPEngine_System_Thread[impl:5]_53] Fatal:
Feb 2, 2005 11:03:28 AM ...Thread.SingleThread.run().OutOfMemory [SAPEngine_System_Thread[impl:5]_50] Fatal:
Feb 2, 2005 11:03:30 AM ...Thread.SingleThread.run().OutOfMemory [SAPEngine_System_Thread[impl:5]_30] Fatal:
stdout/stderr redirect
node name   : server0
pid         : 1820
system name : DP1
system nr. : 00
started at : Wed Feb 02 11:03:37 2005
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude iaik/security/md/SHA a
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
SAP J2EE Engine Version 6.40   PatchLevel 88028.313 is starting...
Loading: LogManager ... 609 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 94 ms.
Loading: ThreadManager ... 15 ms.
Loading: IpVerificationManager ... 16 ms.
Loading: ClassLoaderManager ... 15 ms.
Loading: ClusterManager ... 250 ms.
Loading: LockingManager ... 63 ms.
Loading: ConfigurationManager ... 1031 ms.
Loading: LicensingManager ... 31 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (78 ms).
Service cross started. (125 ms).
Service file started. (125 ms).
Service timeout started. (125 ms).
Service memory started. (156 ms).
Service jmx_notification started. (203 ms).
Service trex.service started. (266 ms).
Service userstore started. (31 ms).
Service tcsecvsi~service started. (297 ms).
Service p4 started. (343 ms).
Service classpath_resolver started. (16 ms).
Service tcsecwssec~service started. (390 ms).
Service deploy started. (2656 ms).
Service apptracing started. (172 ms).
Service log_configurator started. (8031 ms).
Service locking started. (0 ms).
Service http started. (172 ms).
Service naming started. (297 ms).
Service failover started. (62 ms).
Service ts started. (109 ms).
Service appclient started. (140 ms).
Service javamail started. (156 ms).
Service licensing started. (16 ms).
Service jmsconnector started. (172 ms).
Service connector started. (234 ms).
Service configuration started. (16 ms).
Service webservices started. (578 ms).
Service dbpool started. (5343 ms).
Service com.sap.security.core.ume.service started. (2547 ms).
Service security started. (2203 ms).
Service classload started. (109 ms).
Service applocking started. (156 ms).
Service shell started. (344 ms).
Service tceCATTPingservice started. (47 ms).
Service telnet started. (78 ms).
Service keystore started. (516 ms).
Service ssl started. (16 ms).
Service webdynpro started. (172 ms).
Service tcsecsecurestorage~service started. (109 ms).
Service ejb started. (781 ms).
Service servlet_jsp started. (813 ms).
Service dsr started. (343 ms).
Service tcsecdestinations~service started. (141 ms).
Service rfcengine started. (109 ms).
Service jmx started. (829 ms).
Service pmi started. (203 ms).
Service prtbridge started. (688 ms).
Service basicadmin started. (703 ms).
Service adminadapter started. (93 ms).
Service sld started. (1234 ms).
Service monitor started. (672 ms).
Service com.sap.portal.prt.sapj2ee started. (109 ms).
Excluding compile: iaik.security.md.SHA::a
Service jms_provider started. (2954 ms).
service DQE ================= ERROR =================
Service tc.monitoring.logviewer started. (4266 ms).
ServiceManager started for 26532 ms.
Framework started for 28844 ms.
SAP J2EE Engine Version 6.40   PatchLevel 88028.313 is running!
PatchLevel 88028.313 December 22, 2004 20:48 GMT
> service DQE ================= ERROR =================
Regards
Humbert

Unable to install Windows 8 in Boot Camp because of MBR

I just this weekend reformatted my MacBook Pro (Mid 2010, 15", 2.4 gHz i5) and so I had to reinstall Windows 8 with Boot Camp. I had it working fine before, although the lack of drivers made it absolutely terrible (Has Apple released any drivers for it yet?) but the installation went without a hitch. When I tried to install Windows 8 this time though, it did not work at all. On the OS X side, everything went as expected, and when I went to Windows installation everything worked until I had to select a partition. I feel like at this point I should point out that I have removed the optical drive from my Mac and have the Optibay in my optical drive bay and have a 128 GB SSD as my main drive and a 512 GB SSD in the optical drive slot, which was where my Bootcamp partition was, around 250 GB. I was installing Windows 8 using an external enclosure for my Superdrive with the Retail Windows 8 DVD full version. Anyways, when I went to select the partition, it said that it was unable to install because
"Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed GPT disks."
I have heard many conflicting resolutions to the problem, I have heard that I need to remove the other drive and install the optical drive and I have heard that this works very well, and many other things, I just want to find the correct solution to this. Thank you! And I hope I provided you with enough information!

I have a cd drive with a bootable windows 7 disc and I already downloaded the drivers needed to a pendrive on MS-DOS Format.
However this devil things asks me for a windows 8 disc.
Many many thanks if someone knows how to do it.

Unable to install windows 7 and fedora in a dual boot even with windows 8 and fedora also

Unable to install fedora in dual boot please help me to install, is my system supports windows 7 or not with fedora or windows 8.1 with fedora please help me i need very urgent installation of fedora

Hi @siddu007 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP 15-r262tu Notebook and issues with Dual booting Fedora. Here is the support site for Linux for troubleshooting.
Here is a link to Microsoft on your Downgrade Rights. Some features will not be available in a different OS.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Very Urgent Help needed - Arabic support in Forms6i& reports6i

Hi,
Its a very very very urgent requirement.
How to Provide the arabic support in forms .
I am working on Windows Xp operating system.
1. How to Configure the Windows XP Operating system to provide arabic support?
In Design time i want to use English and during runtime i should be able to toggle beteen English and Arabic for Entering the data.Arabic data should be captured in seperate fields.
1. How to configure the oracle 8i/9i databases to provide both arabic(Saudi Arabia) and english? what characterset i need to
choose for saudi arabic?
2.How to install forms & Reports with arabic support?
3.How to dispaly the data in both english and arabic in forms and reports during runtime?
I will be really greatful if u are able to provide me that help and my advanced thanks to ur help.This very
very urgent.
Regds,
B.Prasad
[email protected]

Badma,
1. How to Configure the Windows XP Operating system to
provide arabic support?Please go to "Regional and Language Options" from the Control Panel. In the "Standards and formats" group of the "Regional Opitons" tab, select "Arabic (Saudi Arabia)". In the "Language for non-Unicode programs" group of the "Advanced" tab, select "Arabic (Saudi Arabia)", then restart Windows. If "Arabic (Saudi Arabia)" is not listed, then please go to the "Langauges" tab and make sure the "Install files for complex script and right-to-left languages (including Thai)" in the "Supplemental language support" group is checked.
1. How to configure the oracle 8i/9i databases to provide
both arabic and english? what characterset i need to
choose for saudi arabic?If you're not planning to support other languages than Arabic and English (7-bit), AR8MSWIN1256 should work for you. If you're planning to support other languages in the future, I would recommend you to create your database in UTF8 (Forms/Reports 6i doesn't work with AL32UTF8 database). Please note Arabic characters are represented in 2 bytes in UTF8 while they are 1 byte in AR8MSWIN1256.
2.How to install forms & Reports with arabic support?If you need Arabic translation, then please select Arabic when you're asked the language(s) to install. Otherwise, notmal Forms/Reports installation should work for you.
3.How to dispaly the data in both english and arabic in
forms and reports?Set your NLS_LANG to ARABIC_SAUDI ARABIA.AR8MSWIN1256.
Hope this helps.
Regards,
- Makoto

Unable to instal VOX USB 2.0 drivers in WINDOWS XP Prof. SP2

Hi,
I am unable to instal drivers in Windows XP Prof. SP2 for VOX USB 2.0. When I instal drivers from manufacturer's CD, instalation tells me, that it cannot instal some update for XP SP1. But I have SP2, so it should be OK. Then, after computer restart, I connected VOX and windows could not recognize it and asked me for drivers. I tried to instal drivers manually from the cd, but windows always tells me, that it cannot find driver on CD. I tried to download latest drivers from MSI website, but I had the same problem with it. What should I do? I am unable to use the TV tuner
Could anybody write me exact procedure how to instal it, please please!
Thank You very much.
(I have tried to instal it on another computer with Windows XP Prof. SP2 and it did not work also. The same problem.)

Yes, my system has USB 2.0. It is P4 2.4GHz Northwood, motherboard: MSI 648 Max, 1GB of DDRAM (333MHz), MSI GeForce 4 MX 460, SoundBlaster Live! player 1024, pci card with aditional USB 2.0 ports (NEC chipset), SIS 900 pci NIC, 2x WesternDigital Caviar 1200JB, pci IDE controller SiliconImage 0680a (harddisks are not connected as RAID), DVD-ROM Pioneer, DVD burner LG GSA-4163B.
I have tried to connect VOX directly to USB port on motherboard and also to NEC USB pci card, but it did not work anyway.
I have disconnected all USB devices from the computer, except the mouse.
Windows is updated from MS Windowsupdate website. I use Windows XP SP2 firewall and Microsoft Antispyware beta and antivirus software (I have tried to turn them off during the TV VOX installation, but it did not help).
And I also use power supply for TV VOX.

Very Urgent!!! Unable to install NW2004S - PI ; asking SOLMON key ?

Similar Messages

Maybe you are looking for