VERY URGENT:Upgrade To Netweavers From 3.0B version
HI ALL,
We are currently planning to Upgrade TO SAP Netweavers 2004 (BI).Our Current version is 3.0B.Now We are planning about the preupgrade Activities.As far as the upgrade plan is concerned ,Our client is currently only concerned about Technical upgrade and the rest about using the new technology will be planned later while we finish the technical upgrade.I have already gone through various Links in SDN .But ,I have certain Questions ,So i would like to have specific answers from you.Also ,I want to know about the sizing requirements.?
1.1 what space SAP says is required to do Minimize Downtime
1.2) cpu & memory
2) Add requirements such as GUI ---Netweaver GUI???
3)What is the minimum support pack level that should be applied before we upgrade to Sap Netweavers and what is the latest support pack level?
4) what are the plugins that need to be installed?
5) what is meant by database upgrade (Database & SAP Kernel upgrade) and system upgrade and what do we need to do?
6)What is Regression testing?
7)what is meant by SPAU list review?
8) what do u mean by Prepare Run and what are the activities that are done in this phase and what are Pre Prepare Phase Activities?
9)What is external IGS server with v3.0B?
Please take some time out and help me in this regard.Points will be assigned.This is very urgent for me.
I also want to know ,approximately ,what is the time taken to complete the technical upgrade?
Regards,
Samir
can you give me personnel Mail Id..?
Hence i can send the document to you.
Regards
Saravanan.ar
Message was edited by:
Saravanan Raju
Similar Messages
-
What is the impact of upgrading jdbc drivers from 9.2 version to 10g driver
Hi,
My application is built on Oracle 9.2 with 9.2 version jdbc drivers.
To use Java objects mapping with Oracle object TYPES (for ex. STRUCT),
I had to go for 10g jdbc drivers. Otherwise, I am getting an error:
java.sql.SQLException: Non supported character set: oracle-character-set-178
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:210)
at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:829)
at oracle.sql.CharacterSetUnknown.failCharsetUnknown(CharacterSetFactory
Thin.java:150)
at oracle.sql.CharacterSetUnknown.convert(CharacterSetFactoryThin.java:1
14)
at oracle.sql.CHAR.<init>(CHAR.java:109)
at oracle.sql.CHAR.<init>(CHAR.java:133)
at oracle.jdbc.oracore.OracleTypeCHAR.toDatum(OracleTypeCHAR.java:143)
at oracle.sql.StructDescriptor.toOracleArray(StructDescriptor.java:385)
at oracle.sql.StructDescriptor.toArray(StructDescriptor.java:560)
at oracle.sql.STRUCT.<init>(STRUCT.java:95)
at oracle.sql.OracleSQLOutput.getSTRUCT(OracleSQLOutput.java:95)
at oracle.sql.STRUCT.toSTRUCT(STRUCT.java:328)
at oracle.jdbc.driver.OraclePreparedStatement.setObject(OraclePreparedSt
atement.java:2025)
at oracle.jdbc.driver.OraclePreparedStatement.setObject(OraclePreparedSt
atement.java:2148)
I would like to hear from you that, what is the impact on the existing application if I upgrade
jdbc drivers from 9.2 version to 10g version?
Please do mention all the impact.
VyshuJDBC 10g works just fine against 9.2 database. See the interopeability matrix on the JDBC portal http://www.oracle.com/technology/tech/java/sqlj_jdbc/index.html
Kuassi - blog http://db360.blogspot.com/ -
How do I Upgrade my iPad2 from Software Op Version 4.3.5 to IOS 6.0.
If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
This process will upgrade the iPad to 6.1.3 -
Very urgent : Deleting unwanted documents from billing due list.
Hi all BP Experts,
Issue : User is getting cancelled Sales documents in billing due list.
Ideally it should not come.
Now he wants to remove those documents from list.
Please note that documents are for order related billing.
My query is why the due list is showing the documents which are already been cancelled ?
Second how to remove those documents from list.
Please help soon .
Points will be rewarded.
Thanx n regds!Hi
I am just quoting the reply from 'Vikas Maurya's' issue from yesterday by 'Jhonny'. I presume your issues are related .Here was that reply
+++++++++++++
Hi Vikas,
OSS message 128947 is about items showing up in the due lists when they are not relevant. Try running the program RVV05IVB and see if that fixes it.
Johnny
+++++++++++++
Hope this will help in the resolution.
Greetings -
Very urgent-moving ora9i db from win2k to win2003 server
hi
i need step by step solution to move oracle 9i database from win2k to win2003 server.
i thank u in advance who help me at right time.Steps:
1. install oracle software in windows 2003.
2. shutdown database 9i
3. copy all files in old database to windows 2003 server.
4. use "oradim" to create an instance
5. change some locations for datafiles/controlfiles/logfiles... if needed
6. startup your 9iDB in windows 2003. -
Can't upgrade to CC from CS6 Academic version
Currently I am using CS6, which I bought as an academic package in Japan.
And I'm trying to upgrade from CS6 to CC, using complete discount plan since I have CS6.
I tried to upgrade but the serial number wasn't recognized. Is it because mine is academic version?Fgweb what is the exact error message you are receiving? What Creative Cloud applications are you attempting to install? Do you have a Creative Cloud Membership?
-
Upgrading to CS3 from DW trial version
I downloaded the DW trial and when it was over, uninstalled
it and installed a full version of CS3 Web Premium that I had
purchased. When I try to open a CS3 app, I get the message that the
licensing has stopped working. I have followed instructions in 5
technotes and the CS3CleanScript readme. I have spent almost five
hours on the phone with tech support. I have been unable to use the
product at all. I saw a patch for Acrobat, but not for any of the
CS3 products that solve with this problem. I have moved or renamed
flexnet, the cache, and various other files. Help! Does anyone know
how I can get the product installed so I can get back to work?
Thanks!!!!Try the steps here:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401528&sliceId=1
I had the same issue and it had something to do with the
FLEXnet
licensing. I didn't know about it, but followed the
instructions listed
and all was fine in 5 minutes.
Good luck.
susieqzqz wrote:
>
> I downloaded the DW trial and when it was over,
uninstalled it and installed a
> full version of CS3 Web Premium that I had purchased.
When I try to open a CS3
> app, I get the message that the licensing has stopped
working. I have followed
> instructions in 5 technotes and the CS3CleanScript
readme. I have spent almost
> five hours on the phone with tech support. I have been
unable to use the
> product at all. I saw a patch for Acrobat, but not for
any of the CS3 products
> that solve with this problem. I have moved or renamed
flexnet, the cache, and
> various other files. Help! Does anyone know how I can
get the product
> installed so I can get back to work? Thanks!!!!
> -
VERY URGENT - Adobe forms with email problems
I THERE - I AM A ADOBE FORMCENTRAL CLIENT I HAVE MY PAYEMENTS ON DAY BUT FOR SOME REASON THE ADOBE STOP RESENDING TO MY EMAUIL ACOUNT AND TO MY CLIENTS EMAIL ACCOUNT THE SUMARY OF THE FORM THAT IS SUBMITED. THIS IS VERY URGENT THAT BE FIXED FROM YOU SIDE PLS LET ME KNOW WHAT IS HAPENING.
PLS FIX THIS URGENT AS I HAVE MY CLIENTS SCREEMING ON ME
PLS ANSWER TO
[email protected]Now is working
after 2 hours is working now. but this have never hapen before. now I am
woried with this ADOBE FORM system!!!! it can hapen and I never know.
br
henrique
2014-04-25 21:29 GMT+01:00 Josh_Corey <[email protected]>:
Re: VERY URGENT - Adobe forms with email problems
created by Josh_Corey <http://forums.adobe.com/people/Josh_Corey> in
FormsCentral - View the full discussion<http://forums.adobe.com/message/6331228#6331228 -
VERY UREGENT:UPGRADATION FROM BW 3.0B TO SAP NETWEAVERS
HI ALL,
We are currently planning to Upgrade TO SAP Netweavers 2004 (BI).Our Current version is 3.0B.Now We are planning about the preupgrade Activities.As far as the upgrade plan is concerned ,Our client is currently only concerned about Technical upgrade and the rest about using the new technology will be planned later while we finish the technical upgrade.I have already gone through various Links in SDN .But ,I have certain Questions ,So i would like to have specific answers from you.Also ,I want to know about the sizing requirements.?
1.1 what space SAP says is required to do Minimize Downtime
1.2) cpu & memory
2) Add requirements such as GUI ---Netweaver GUI???
3)What is the minimum support pack level that should be applied before we upgrade to Sap Netweavers and what is the latest support pack level?
4) what are the plugins that need to be installed?
5) what is meant by database upgrade (Database & SAP Kernel upgrade) and system upgrade and what do we need to do?
6)What is Regression testing?
7)what is meant by SPAU list review?
8) what do u mean by Prepare Run and what are the activities that are done in this phase and what are Pre Prepare Phase Activities?
9)What is external IGS server with v3.0B?
Please take some time out and help me in this regard.Points will be assigned.This is very urgent for me.
I also want to know ,approximately ,what is the time taken to complete the technical upgrade?
Regards,
SamirHi Samir,
Refer these links
Below links for upgradation material for BI 7.0.
BI platform:
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/594e3c6bf4233fe10000000a114084/frameset.htm
performance optimization
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
analysis & repair environment
http://help.sap.com/saphelp_nw2004s/helpdata/en/92/1d733b73a8f706e10000000a11402f/frameset.htm
scheduler
http://help.sap.com/saphelp_nw2004s/helpdata/en/e1/b7463c32a3fe13e10000000a114084/frameset.htm
FI extraction
http://help.sap.com/saphelp_bw32/helpdata/en/af/16533bbb15b762e10000000a114084/frameset.htm
whats new in BI 7.0
http://help.sap.com/saphelp_nw04s/helpdata/en/57/a21f407b402402e10000000a1550b0/frameset.htm
System administration tasks
http://help.sap.com/saphelp_bw30b/helpdata/en/d1/e81c3b85e6e939e10000000a11402f/frameset.htm
process chains
http://help.sap.com/saphelp_nw70/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
WAD screen cam
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6dd54713-0c01-0010-8691-a3576b9a95d9
BI content installation
http://help.sap.com/saphelp_nw2004s/helpdata/en/c1/ea683cc5e8ca68e10000000a114084/frameset.htm
BI suite :Business Explorer
http://help.sap.com/saphelp_nw2004s/helpdata/en/5b/30d43b0527a17be10000000a114084/frameset.htm
BI 7.0 & EP 7.0 integration
Re: BI 7.0 and EP 7.0 Integration
DTP's
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fb8ed8481e1a61e10000000a422035/frameset.htm
Hope this helps
Regards
KArthik -
Impact on upgradation with tables TTAXI & TTXY Very urgent
Kindly can any one let me know the Impact on upgradation with tables TTAXI & TTXY Very urgent.
Thanking you in advance
Regards
VeenaHi,
The problem is that you controls are not beeing freed. You have not passed the lifetime parameter a value when you create the container and text editor. This will set the lifetime to lifetime_imode which means the control will remain active either until the internal session (your transaction) ends or you explicitly call the free method for each control.
Add the lifetime parameter to the call and set the lifetime to cl_gui_control=>lifetime_dynpro.
From
De Wildt -
VERY URGENT!! How to Pass a "% " symbol from form to Report
Hi
I am using oracle 10g and passing a symbol "%" as a parameter to the report from a form. But it shows error as follows:
REP-52006: Failed to decode the specified URL PARAMETER1=%.
But it is working when it runs in the Report directly.
Then Why we can't pass the symbol "%" to the report from form.
Please reply me as soon as possible. IT IS VERY URGENT !!Hi,
Try using a lexical parameter(&parm_1) for a string of values or a bind parameter(:parm_1) for a single value
Thanks,
Kimosabe -
Very Urgent: Deleting Batch from STO and Goos Issue reversal Using BAPI
Hi,
I want to delete outbound delivery for particular shipment number and this should be done using BAPI or a FM not using the tcode VL02N.
I wld be very grateful
Please List out the BAPI 's or FM that can be used for to perform these listed , with using Tcodes:
1) REVERSE BILLING DOCUMENT(VF11)
2) GOODS ISSUe REVERSAL (VL09N)
3) REMOVE DELIVERY FROM SHIPMENT (VT02N)
4) DELETING DELIVERY(VL02N)
5) REMOVE BATCH FROM STO (ME22N)
Its very urgent..
Thank you in advance....1) REVERSE BILLING DOCUMENT(VF11)
BAPI_BILLINGDOC_CANCEL
2) GOODS ISSUe REVERSAL (VL09N)
BAPI_GOODSMVT_CANCEL
3) REMOVE DELIVERY FROM SHIPMENT (VT02N)
BAPI_SHIPMENT_CHANGE
4) DELETING DELIVERY(VL02N)
5) REMOVE BATCH FROM STO (ME22N)
BAPI_PO_CHANGE -
my friend shared a video with me on icloud photo sharing and then she deleted it from her camera roll, how do I save it???(very urgent)
DVDs are encoded into MPEG2, which iMovie cannot edit. So you need to convert the DVD back to something else. For highest quality, I recommend that you convert the DVD to Apple Intermediate Codec. There is a free tool called MPEG Streamclip that will do this. You will also need to install the Apple QuickTIme MPEG2 Playback Component.
Here are the details.
1) Download and install the Apple MPEG2 QuickTime Component ($20) - available online from Apple.
2) Download and install MPEG Streamclip from Squared 5 (free).
3) Start MPEG Streamclip
4) Insert your DVD into your Mac. If DVD Player or Front Row starts automatically quit those.
5) Open a Finder window. Navigate to your DVD to the Video_TS folder.
6) Drag the .VOB files from the Video_TS folder and drop then into MPEG Streamclip.
7) If MPEG Streamclip offers to fix timecode breaks, say yes.
8) Use FILE/EXPORT TO QUICKTIME to convert the files to Apple Intermediate Codec (or h.264 if you prefer)
9a) Optional: You can deinterlace your footage in this step, if you like
9b) optional: If you know the date and or time of the footage, name your file
clip-yyyy-mm-dd hh;mm;ss
(let mpeg streamclip provide the extension). This will provide metadata that iMovie will use to put the event in the right year and month.
9c) Optional: If you don't want to make one huge clip out of your DVD, you can make smaller clips by using MPEG Streamclip. Move the cursor to the "in" point of the clip, and press i. Move the cursor to the "Out" point of the clip, and press o. Then do steps 8 through 10 and repeat until you have done this for all clips you want.
10) Save the resulting file in a place where you can find it, like your Desktop.
11) Open iMovie.
12) In iMovie, choose FILE/IMPORT/From File and choose the file you saved in steps 8, 9, 10.
13) iMovie will generate thumbnails and you can edit. -
my friend shared a video with me on icloud photo sharing and then she deleted it from her camera roll, how do I save it???(very urgent)
Welcome to the Apple Community Diane.
I find that shared video can be troublesome, a few haven't appeared to work as you describe but have done when I've looked at a later date. Hopefully they will work if you give them a bit longer. perhaps it would be a good idea if you make sure they are working before deleting them from the camera roll. -
Copy Master Datas in FICo from 1 Company Code to Another --- Very Urgent
Hi Peers
I want to copy all the FI & CO master Data like G/L a/cs , Vendor Master, Customer Master, Cost Centers, Cost Elements, Commitment Items, Funds Center & Assets from one company code to another company code. Both the company codes will have same Chart of accounts. Is there any t.Code by which i can just extend these masters to my company code. Plz help. its very Urgent.
Expecting a reply ASAP.
Regards
RajaramHi
In customization, Assign Chart of A/cs to company code there u will get the path for copying one company code to another company GL Masters.
And also the CCtrs u already assign to the first company code. Once u copy the data for one company to another automatically it will copy to another company code.
Hope this is useful to u.
Shammi
Maybe you are looking for
-
My MacBook Pro cannot connect to WiFi
Hi guys. I have a MacBook Pro 15" which I got about two years ago. I'm using OS Lion 10.7. I didn't had any problems for two years but about a month ago our wifi had a little damage. So we bought another one, the same model. First none of the de
-
Imovie/Final Cut project compatibility
Can you open Imovie digitized movie clips/bin in Final Cut Pro. I hope so because, I've digitized a ton of media into Imovie, which I'm going to end up editing on Final Cut Suite.
-
How do I control the Quicktime Export settings for a project
I want to make a printed photo album in iPhoto for my parents Diamond Wedding Anniversary and so have set up a project with the appropriate template. I now want to create a preview quicktime movie of the book so far in order to send it to my brother
-
Syncing ITunes with My documents music folder....?
Was just wondering if its possible to sync ITune with the music folder on my computer as it gets annoying having to add new music manually, especially as Windows media player does this automatically without causing duplicates...
-
Hi, how can I configure in Apple Mail on OS X the mailbox folders for drafts, sent and deleted as in Mail on iOS?