VERY VERY IMPORTANT iMOVIE QUESTION!

Hey! I really need your help!
So... I have been working on a project on iMovie for a few months now..
It all went well, til' when the Movie was about 20 minutes long... I couldn't play it in Full Screen, cause my Laptop always froze and i had to force quit iMovie... But it wasn't to big of a problem, because I could stil watch the movie, just not in Full Screen... But I got with it..
Now the movie is 45 minutes long and I have a big Problem!!! I CAN'T PLAY THE MOVIE AT ALL! iMovie freezes as soon as I click on this project.. All the other projects are fine... JUST THIS ONE! I really need this Movie... It's really important!!! WHAT DO I DO?!?!?
Please help me!   Thanks in advance!

I think it's pretty much been covered with everything. You have 2 options:
1) Buy a replacement battery once yours is dead.
2) Don't buy a replacement battery and work off the mains.
And if you find out your processor is too slow if you go with option 2, then switch to option 1. You may be strapped for cash now, but if you save pennies for the next five years, you'll cover it. Probably if you do get five years' life out of your battery, your Pro will be an old 'just in case' laptop by that point anyway.
You might want to research how you can make your battery life last longer as well. Like how charged up you should keep your notebook, whether or not to drain the battery completely and for how often etc. Can't remember the MBP's battery type off the top of my head.

Similar Messages

  • Very important Battery Question from a prospective Mac buyer...

    Hi, guys!
    I am thinking of purchasing a Macbook Pro and just read that the battery is sealed-in. I know that I am able to buy a replacement battery, but I would also like to find out if I can still use the Pro even after the battery is broken?
    I have no problems with only being able to use the Pro when plugged into an outlet, but is it possible? Can I still use it in Plugged Mode even if the battery is long gone? Or do I really need to have a working battery in order to be able to use it (plugged or not)?
    Im a bit strapped for cash so I just wanna make sure to cover all bases before making a purchase.
    Thanks!

    I think it's pretty much been covered with everything. You have 2 options:
    1) Buy a replacement battery once yours is dead.
    2) Don't buy a replacement battery and work off the mains.
    And if you find out your processor is too slow if you go with option 2, then switch to option 1. You may be strapped for cash now, but if you save pennies for the next five years, you'll cover it. Probably if you do get five years' life out of your battery, your Pro will be an old 'just in case' laptop by that point anyway.
    You might want to research how you can make your battery life last longer as well. Like how charged up you should keep your notebook, whether or not to drain the battery completely and for how often etc. Can't remember the MBP's battery type off the top of my head.

  • Very Important Raid Question

    PLEASE CAN SOME ONE TELL HOW TO GET MY RAID DRIVES BACK ON THE TRACK.
    MY MSI MAX2 845 RAID BORD IS BROKE, AND I WANT TO READ MY DRIVES AS SOON AS POSSIBLE. WITH WHAT? I CANNOT FIND/BUY ANOTHER BORD.
    HELP HELP HELP

    If they are striped and you can't connect them to the same type of Raid controller anymore then you are probably out of luck.  
    You must put the drives on the same connector as master/slave as they were before.
    How broke is the board?

  • A very important question for every After Effects user

    a very important question for every After Effects user, from product manager Steve Forde:
    http://adobe.ly/1exI6tI

    Tom Daigon Great idea everybody! Encourage Adobe to do ONLY ONE THING with AE for 2014. Since theres not a heck of a lot of development that can be done on the present foundation, they can really stretch the rental scheme out for many years.And once you get used to the concept, every year they will do ONE THING to placate you. So now they have you swallowing no "ownership" of software and limited development. 

  • A very important question about the HostSample-Help needed!

    Hi,
    I'm trying to build a plugin for EM 12c ( 12.1.0.2 ) which suppose to monitor jmx mbeans .
    I encountered during the README file which was packed with the EDK .
    1. In the section where I try to use Flash builder ( ver 4.6 - that's the only release I found .. ) I folowed the instructions if how to run the example ( HostSample/HostSystem ) . When I run the example ( I installed the sdk's of Flash and everything that was written there - no problem )
    in the web browser i got the login page , and put the parameters ( username, password ) as it said in the README - the same username/password as i log in to the EM console .Than I got an error saying " ... RPC fault string ..... Logging to management server ... URL:https.. host ( my host name ) : port ( my port number ) /em..."
    Does anyone has a clue about this ? What am i doing wrong or miss something ?
    It is very important and urgent to me . please help .

    To add a bit more detail. Before you run the application from FlashBuilder, open the same browser you will use to run/debug the application in FlashBuilder and install certificate.
    Firefox:
    . when the "This Connection is Untrusted" warning appears
    . expand the "I Understand the Risks" item
    . click the "Add Exception..." button
    . on the "Add Security Exception" dialog, ensure "Permanently store this exception" is checked
    . click "Confirm Security Exception" button
    IE:
    . when the "Certificate Error: Navigation Blocked" page appears, click "Continue to this website (not recommended)"
    . click on the "Certificate Error" icon in the browser address bar
    . in the "Untrusted Certificates" popup, click "View Certificates"
    . click on the "Certification Path" tab of the "Certificate" dialog
    . select the root certificate (certificate at the root of the tree)
    . click "View Certificate..." button
    . click "Install Certificate..." on the "Certificate" dialog that appears
    . click "Next" on the "Certificate Import Wizard"
    . select "Place all certificates in the following store" button and click "Browse..."
    . select "Trusted Root Certification Authorities" on the "Select Certificate Stores" dialog and click "OK"
    . click "Next" button, and then "Finish" button
    . click "Yes" on "Security Warning" dialog that appears
    The other alternative is to enable http access using "emctl secure unlock". This is not recommended for a production site.
    .

  • VERY IMPORTANT QUESTION

    hello , i have just had a very important personal voice conversation which is very important for me i would like very much to get this coversation in media file is it possible , please help me this is extremely important for me
    thank you , if you anyone can help me please contact me , this is really very important this was a conversation of my life and i would very much have it for myself and some other people
    please help me , thank you

    Unfortunately, Skype doesn't save calls and video calls. 
    CONTACT SKYPE CUSTOMER SERVICE   |  HOW TO RECORD SKYPE VIDEO CALLS  | HOW TO HANDLE SUPICIOUS CALLS AND MESSAGES   |  WINDOWS PROBLEMS TROUBLESHOOTING   |  SKYPE DOWNLOAD LINKS  
    MORE TIPS, TRICKS AND UPDATES AT
    skypefordummies.blogspot.com

  • GAP on credit control very important & tricky

    1.     Create a sales order with quantity 1
    2.     Order is blocked because of credit limit check.
    3.     Release sales order and delivery is created
    4.     Change order amount on VA02 for this sales order as 10.000
    Displays the following “warning” messages:
    Schedule line quantity is larger than target quantity
    Delivery of      1,000 has already been made for item 000010
    Skip these messages by pressing enter and save the order:
    5.     Go to VL02, change quantity as 10.000 and post good issue.
    This problem is very important and this means currently there is no risk control on our system.
    please provide the solution to have a control

    hello again, vipin.
    pardon my persistence, but i find this case very interesting.
    just now i tested rush order with credit block in our test system.  this is what i observed...
    1.  i made a rush order for 1 unit.  when i saved it, the order was blocked for credit and no delivery was created.
    2.  i released the order using VKM3, and the delivery was automatically created.
    3.  i went back to the order and increased the order quantity to 10.  i got the same messages you did.  but when i saved the order, it was again blocked for credit.
    4.  when i released it again, it did not automatically create a new delivery and this i had to do manually.
    the question is why did your rush order not get blocked again when you increased the quantity?  because if you followed standard settings it should.
    however, i guess my capacity is up to here only.  hope somebody else would come up with the real solution.
    anyway, my best wishes to you.
    regards.

  • My sony SD card got formatted recently with very important images. On top of it we recorded photos a

    my sony SD card got formatted recently with very important images. On top of it we recorded photos again. I am able to see iformation  like the size of the image along with blank thumbnails, but not the actual images. Please HELP.
    Regards
    Gunshe Ramchandani

    It may be possible to recover deleted pictures or data by using the Memory Card File Rescue 3D software at http://esupport.sony.com/US/perl/swu-download.pl?template=EN&mdl=&upd_id=7184&SMB=YES.
    Otherwise, the SD card may need to be sent to a professional data recovery service company, like Sony Media Services or DriveSavers Data Recovery. For more information and pricing, visit the Sony Media Services Web site at http://www.sonymediaservices.com/ or the DriveSavers Data Recovery Web site at http://www.drivesaversdatarecovery.com.
    If my post answers your question, please mark it as an “Accepted Solution.” This will allow users to find verified answers more quickly.

  • Why can I not use my Norton Toolbar... It is a very important item... If I can not run norton toolbar, then I do not want the new version of firefox.... How do I go back to my old version..

    Question
    Why can I not use my Norton Toolbar... It is a very important item... If I can not run norton toolbar, then I do not want the new version of firefox.... How do I go back to my old version..

    Norton has had over 5 months to work in their Firefox extensions, since the API's were locked for 4.0. Ask Norton why they pull this crap every time Mozilla releases a new version of Firefox. When Firefox 3.6 was released mid-January 2010, it took Norton until almost April to come up with a working version of their Firefox extensions.

  • I deleted an e-mail from my iCloud account from my iPhone and cleared the trash. I accidentally deleted an e-mail from my college containing a string of 3 e-mails which are very important. Is there anyway to retrieve the e-mail from the Apple server?

    I deleted an e-mail from my iCloud account from my iPhone and cleared the trash. I accidentally deleted an e-mail from my college containing a string of 3 e-mails which are very important. Is there anyway to retrieve the e-mail from the Apple server?

    My question is similar:  I deleted email folders in my mail app on iPhone 4 and it deleted the folders on all my other devices--literally THOUSANDS of emails!  I went to iCloud to recover them and can't find them.  HELP PLEASE!

  • !!Audigy Owners and Creative Customers *VERY IMPORTANT

    Anyone who is an Australian and a customer of Creative should pay attention to the upcoming APC magazine (April edition),Australia's largest selling computer and tech magazine, specifically the Watchdog section. A letter regarding the Audigy, its driver package and the ongoing "EEPROM Bug" which affected hundreds, if not thousands of Creative customers has been submitted to the editors. They have agreed to publish it. Creative have been asked to respond to the letter in time for publication. Keep an eye out. This should be interesting.
    hah.

    > Has anybody else been contacted by SAP regarding a "Very Important Notification about Security and Your SAP System"
    A forum search on ' 1298160", one of the note numbers, reveals the answer to your question.
    Please always use the search first.

  • Exclusive queue regarding very important message

    Hi guru!!
    I have one question regarding very important message in exclusive queue for async.
    i wanted to find a way which is using exclusive queue for it and then let it use only this queue. anyone does know?
    my scenario client java proxy to inbound abap proxy.  should be used by exclusive queue for it during sending to receiving, any another message should not use this queue included xi and ecc queue.
    can anyone explain me?
    thanks & regards;
    venjamin

    Hi Venjamin,
    U may use one queue with ABAP Proxy or a BPM scenario.
    This can be done using: Configure Filter for Queue Prioritization in transaction sxmb_adm.
    Refer the following
    /people/sap.user72/blog/2005/12/12/how-to-prioritize-messages-in-xi
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/59e837d3-0201-0010-c096-dc1869733413
    Similar problem here
    Specific queue for one Scenario.
    Regards,
    Prateek

  • I have numbers on my ipad and after the latest update I can't open a spreadsheet in it, a very important spreadsheet. I have rebooted a number of times but this does not seem to have fixed it can someone advise what I can do??

    I have an ipad and have just downloaded the lastest update, now I have a very very important spreadsheet that will not open!!!! other spreadsheets open fine but for some just this one will not open. I have rebooted the ipad and tried re-syncing but to no avail, can anyone HELP?????

    I had the same problem. I created an iCloud account and backed up my iPad to iCloud. I then went to www.iCloud.com, signed-in and then I was able to download my spread sheet data. At least I have my data.

  • HT204053 Me and my daughter had been using the same apple id, she was triyng to change it now all of my iphone contact are gone, what can i do ti get it back , this is very important to me.

    Me and my daughter had been using the same apple id, she was triyng to change it, now all of my iphone contact are gone, what can i do ti get it back , this is very important to me.

    Your contacts are helpd on the server, so if you sign out from your iCloud account and sign into another one they will disappear. If you sign back into the original account they will reappear.

  • How can I view my pictures that were backed up to iTunes? I no longer have an apple product but need to view the pictures for very important reasons.

    How can I view my pictures that were backed up to iTunes? I no longer have an apple product but need to view the pictures for very important reasons.

    If you mean backed up as part of an iPhone backup in iTunes?  If so, you would have to use 3rd party software to extract them from the backup, such as iPhone Backup Extractor.

Maybe you are looking for

  • Firefox will only open once

    I can run Firefox once per profile & then it won't start again. I have to make a new profile to get it to open again. Alternatively, I can start Safe Mode and then exit after the prompt with the options to enter Safe Mode. After that I can start Fire

  • Compiling many still images into a movie

    Hi, I have about 2,000 still frames, all PNG files, that I wish to compile into a movie. They are a bit of a weird size (1049x870px) so iStopMotion doesn't work. iMovie 8 is beyond useless for this since it downsizes them, works in a different frame

  • Open pdf file on ribbon button click in mscrm 2011

    Hi, I want to open pdf file from button placed on Accont entity ribbon. Through HTML i tried below code and it worked fine <html> <body> <a href="file://C:\Users\asinha\Documents\UML.pdf">Link to a pdf</a> </body> </html> But i am not able to use the

  • Automatic confirmation of activity hrs in COR6

    In COR6, once qty of Goods Received is confirmed, we are required to confirm actual hrs taken to complete each operation for a Works Order.  Some workcentres / resources always use std hours, and operators have to manuallly confirm std hours each tim

  • Has anyone experienced Photoshop causing noisy images?

    Everytime I start Photoshop CS6 dark images become clouded with white dots much like snow.  The noise covers the images, but shows up best on dark areas and images.  This has been happening over the last week, but I just realized in the last 24 hours