Very Very long ping time, only on arch, and preload doesn't work
Arch is the most amazing Linux system I have ever used. I get like a 30 second boot time from start to finish, i'm just wowed.
I am using arch64, and have only 2 problems!
1. I have like a 32ms ping, for any site, toooo big. I have a 3com NIC card which Is currently being used as eth1, and an nvidia network controller on my board eth0. The nvidia controller doesn't work right, so i am using the 3com, with a huge ping time
2. preload isn't working. I have 3gb of RAM, and AMAZINGLY only 400mb of RAM is being used, with 9 tabs in firefox open, compiz-fusion, gnome desktop. DAMN! I want more RAM being used, what is wrong with this?? (the problem is that things start up a little slow, so it must mean it is not staying in the RAM)
Please tell me what I can do to fix these problems!
EDIT: Could it have something to do with the groups I am in, or the preload.conf settings, or the rc.conf file?
Last edited by savagenator (2008-03-19 23:27:03)
I saw your latency thingy... though that aint so bad
PING fk-in-f147.google.com (209.85.129.147) 56(84) bytes of data.
64 bytes from fk-in-f147.google.com (209.85.129.147): icmp_seq=1 ttl=242 time=146 ms
Pinging from norway to... wherever that node is.
and compare that to a norwegian host
PING www.sau.no (194.63.248.23) 56(84) bytes of data.
64 bytes from web.domeneshop.no (194.63.248.23): icmp_seq=1 ttl=47 time=86.6 ms
all in all, you should not be so annoyed unless your used to sub 10 ms ofc.. but this is still very quick for a webhost, atleast i think so.
Similar Messages
-
Is anyone else having trouble with long ping times under Lion 10.7.3? I'm seeing pings of around 1000msec to standard sites. My Leopard notebook shows normal ping times around 35msec to the same sites, over the same network connection. I think this is new since I upgraded to 10.7.3.
Problem solved! I just installed 10.7.4 and suddenly the pings are 35 ms as they should be. Thanks for your input on this Linc, but we can now close this thread. It'll only be of interest to someone else who has identified the same problem but has not yet made the jump from 7.3 to 7.4. Cheers.
-
The only time the sound/speaker and mic don't work is when I answer or make a call
The only time the sound/speaker and mic don't work is when I answer or make a call. They both work fine for everything else. This has been going on for over a month. AT&T said it's Apple and Apple said it's AT&T. I've been around that cycle twice.
When I dial a call, I can see the status words on the screen but can't hear the ringing. If the person I'm calling answers, my screen will show the call was connected and the call timer will begin but I can't hear anything and they can't hear me. If one of us doesn't end the call, the timer keeps going and I'm being 'charged' for dead air. (Of course, one of us disconnects so mins/cost isn't an issue, I'm just adding the info in case it helps solve the problem.) If they don't answer, the call will go to their greeting but I can't hear it and wouldn't be able to leave a message anyway because my voice isn't going through. However, they will get a voice mail alert and see that I called but no message was recorded.
If some one tries to call me they will hear ringing but when I answer, they can't hear me and I can't hear them. If I don't answer, they will hear my greeting and can leave a message. I can retrieve and hear my voice mail. Trying speaker phone and headsets didn't change anything for calls out nor for calls in.
I have 4.3.3 and have synched, reset, rebooted, turned things on and off and off and on and took the SIM card out of the phone and out of it's tray and put it back in. I've done all that several times in just about every combination and order possible.
Hopefully the following will provide good clues: On only about three of the many attempts I've made to get it to work correctly that included taking out the SIM card, I could make and/or get one or two calls with no trouble but then the problem comes back. Also, when I swapped the SIM card with another iPhone4 on my plan, the other phone would work with my SIM card but my phone still would not work with the other SIM card. The last fact makes me think it is an Apple issue. I'll go to an Apple store (genius) this weekend. Will I be wasting my time and gas? Anybody have any experience with this problem?Let me try and address some of your questions. I'm only on a pc, so a few of these answers might be slightly different on a Mac, but not too different (such as control click rather than right click).
First, when you buy something on your phone, be it apps or music, it's transferred from your phone to your Mac when you sync your phone. So those apps should now be in you iTunes library. ( IF for some reason you can't find them there, you should be able to download them again, either onto your phone or through iTunes. On your phone, go to the App Store > Updates and you'll see a "Purchased" link at the top of the page, you can view all purchased apps here and redownload them. In iTunes, you can go to Store > Check for available downloads. )
Whenever you plug your phone in, it should create a backup of everything you have on the phone. This is how, provided restoring your phone as a new device doesn't fix the issue (more on this later), you can put all of your music and apps onto the new phone. You can always plug your phone into your Mac and the first thing it should do when it syncs is create a backup. If you want to be sure, you can right click on your device in iTunes (on a pc) or I assume control click on a Mac and select "backup".
The genius will take care of the sim card and setting up your phone, however you will have to put all of your music and apps on it, unless you ask the genius, I've never bothered since I know how to do this.
You should have no problems restoring from a backup if they give you a new phone. However, it's probably safest to try and create a backup of your last phone backup before you restore it as a new device. I suggest you refer to http://support.apple.com/kb/ht1414 for more information about that.
I've had no problems with my new phone so far.
I'll try to keep checking this thread if you have any other questions or need more clarification.
Edit: I should say we never did figure out what exactly was wrong with my phone. The only thing I can think of was that it got a lot hotter than the phone it replaced, and also the phone I just got yesterday to replace the malfunctioning one. But otherwise they saw no problems with the hardware, but acknowledged it must have been the hardware since we tried everything else. Also I would go with a list of all the things you tried with this phone, for your own reference and the genius's, especially if you're not confident in your tech skills Showing the genius that you've tried: different sim cards, updating the software, restoring it from a backup, and now restoring it as a new device, should convince them that you've done everything you could, and the only other answer is hardware problem.
Also if you don't already have one, make a genius appointment ASAP. Most stores are very busy and their appointments fill up fast. I always suggest making an appointment as early as possible, hopefully before the retail store hours when they've only got techs there because they usually are less stressed and have a bit more time to spend with you. The easiest way to make an appointment is to download the Apple Store app. It detects the closest Apple store from you and makes it quite easy to schedule a genius.
Message was edited by: deddinty -
My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.
The Videos are showed up front 4 months, but now they are no longer to be seen. When you star a video first the hard drive starts, but then it stops and hangs up. I have to restart it, starting with the apple logo....Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
i bought an ipod in 2006 and used it only for a few days, and i lost it when it fell two times from my hand and it wasn`t working, help me regarding this.
REGARDS
RISHABH AULIYAApple - Support - iPod - Repair pricing - http://www.apple.com/support/ipod/service/prices/
ipod repair options - https://discussions.apple.com/thread/3900047 and https://discussions.apple.com/message/18867033
Service Answer Center - iPod - http://support.apple.com/kb/index?page=servicefaq&geo=US&product=ipod <-- enter correct country once on page. -
Downloaded latest version on my laptop. Doesn't syn but only do recognize my iPhone 5 of 2012. Uninstall and re install for few times and it doesn't work at all! Can't back up data anymore. Please advise.
Uninstall and re install for few times and it doesn't work at all!
Are you (currently) getting an error message when you try to launch iTunes? If so, what does it say? (Precise text, please.) -
Every time one of my email addresses doesn't work on my mail app, due to wrong password or whatever, it deletes all of the contacts form my phone. What can I do to stop this from happening?
I have tried deleting the account and it deletes all my contacts. I have verizon and even using back up assistant, it says the contacts are there but they aren't. The only way i can find a contact is if I start to type a name in and new text but once i sent the new text, the name disappears and it just shows the number. Siri nor the address book don't recognize any contacts at all.I cant find any reciept in my email or in my husbands email. I am going to attempt to call and speak to someone who can help me because this was not my fault except trying to be normal and update my phone!
-
I just downlouded the latest version of the Muse CC and it doesn't work well, it freezes all the time, in particular with the tools. Example the selection tool doesn't wor at all. Is there any solution for this problem?
Hi!
I restarted the computer, but the same issue happens again. When I move my mouse over some object or tool, it doesn’t come active at all (only some of the tools works) When I try to change “site properties”, I can’t choose tablet or phone mode or even I can’t select the checkboxes, only thing what I can do is change the numbers (high and width) . After all the main problem is that I can’t select some of the items or functions by mouse, but only by the keyboard. -
Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open
Installed iTunes on my laptop Windows 7 64 bit and I now have the following problems 1) iTunes volume won't adjust with the laptop volume control, only within iTunes, 2) playback doesn't work unless I click play twice and 3) the iTunes Store won't open
-
i pay for upgrading ifindyou and it doesn't work!!!! it clearly says that it tracks only your mobile in the lite version, after you ask the upgrade for all the mobile... can we call this a fraud????
Hi,
"A day after the name change became official my built in skydrive app stopped working"
Did you point that SkyDrive changed to OneDrive?
Did you move your OneDrive to another location or change its name?
Please login OneDrive with web-based to check if you could access it successfully.
Please refer to the following article to try the troubleshooter and check the service status:
SkyDrive: FAQ
http://windows.microsoft.com/en-in/windows-8/skydrive-app-faq
Karen Hu
TechNet Community Support -
After change to Mavericks my Mac become too slow e I can't use it because stays asking passwords for "talagent" and "messages agent" as icloud keys. I got changed the icloud password many times and still doesn't work. I can't open any program.
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access. -
after a long in "stop" period, the internet connection (ethernet) doesn't work. before updating to mountain lion this problem didn't exist.
Gave up on the GUI. This script derived from http://blog.netnerds.net/2012/07/os-x-how-to-setup-nat-on-lion-and-mountain-lion / seems to work for me:
gwdev=en0 # This is my WiFi connection (has Internet connection)
targetdev=en1 # This is the USB to Ethernet adapter (to give Internet connection)
/sbin/ifconfig $targetdev down
/sbin/ifconfig bridge0 create
/sbin/ifconfig bridge0 up
/sbin/ifconfig bridge0 addm $gwdev
/sbin/ifconfig bridge0 $HOST_ADDR
/sbin/route add default -interface bridge0 -ifscope bridge0 -cloning
/usr/sbin/sysctl -w net.inet.ip.forwarding=1
/sbin/ipfw add 100 divert natd ip from any to any via $gwdev
/usr/sbin/natd -interface $gwdev -use_sockets -same_ports -unregistered_only -dynamic -clamp_mss -enable_natportmap -natportmap_interface $targetdev -
My imsg is not working with only one person and her imsg is working perfectly fine with her friends
My imsg is not working with only one person and her imsg is working perfectly fine with her friends
See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
From Apple:
MacBook Air (Mid 2013): FaceTime HD Camera might not work after OS X 10.8.5 update
Yes, a fix is coming soon. -
I have a IPOD classic late 2009 160gb ... Only my play/pause buttons doesn't work ? Do I need to replace the click wheel ?
May try DIY due to cost
Just wondering if anyone's had this fixed how much it costs
Or if it's another problem before I order partsI have found the solution for myself for the above. I use a specific scripting program which is accessed by Control A. To pause it, you need to use Control B. not sure if this would work for any other application but it resolves my dilemma after hours of trying!
-
AirPort Time Capsule. Read everything and tried everything. Can't get a guest network to work. Switched from bridge mode and still doesn't work. Anyone able to set up a guest network?
I had a bright house cable modem that also had built-in wi-fi.
Don't mean to be picky here, but if the "modem" had built in Wi-Fi, it was not a modem. It was a modem/router, also known as a gateway type of device.
A device like this combines the functions of a separate modem and separate router in one package. Turning off the wireless on a device like this does not make a it modem.....it is still a modem/router or gateway with the WiFi turned off.
I think that if I have them replace the current "complicated" modem with a "simple" one I should be able to get the guest network up and running.
That would be correct. Hopefully, they offer this type of option for their customers.
Maybe you are looking for
-
Booting into recovery mode and Web service in 10.7 server
I have two servers: Server A is running 10.6 server and server B is running 10.7 server. Both are on the same LAN at a data center. My questions are as follows: 1 - is there a way to restart server B into recovery mode remotely? (and not using a KVM)
-
I am unable to build a distribution kit because the builder appears to have saved a path to the NI Variable Engine which is not valid. I appear to have the NI Variable Engine installed. There are NI Variable Engine 2.5.0 .xml files loaded in on m
-
Problem: When two different web applications are running and one person inserts a record, the other person doesn't see the record unless they reload the application. How do I permit one user to enter information and on the next action of the second u
-
Update the field in the database table
hi i have a field zbarcode BCS|0600015004500|127 i have to update only in middle portion i.e material no, i.e 0600015004500. please let me know how to do this logic
-
What is the best format/codec to save a video edited in FCP7 for a DVD??
I am trying to make a DVD from a video I've edited in FCP7. I am not using the correct codec and, I think, making the file too big. The details of my set up are in these two screen shots. This has happend in the past but I do not know what it is I am