Very very urgent ( RG1 register )
Dear All,
My client was updating the rg1 register through the standard process, but the entries that were updated were wrong .
Now I want to revamp the register and delete all the entries in the J_1irg1 register and also the J_21bal register. and start the process frsh for this financial year.
My question is is it possible to do the same and if yes can you give me the detailed procedure.
you will be rewared with maximum points for your valuable answers.
deepak
hii,
go in SE16,put table-J_2IRG1BAL
execute then select entries and delete all
then for fresh entry,again go in SE16,then go in same table---click on table entry
then put carry forward balance and initial balance---save it.
then extract register by j2i5---then go in j2i6 for print
hope it will help you
DD
Similar Messages
-
HI Gurus
Their is any reports available like purchase register? In vendor register we have the following fields
1. Purchase material
2. ED
3. Service Tax
4. Vat
in one report or which report this fields will available.
To reconcil the vendors account we are facing this problem.
Anybody can help me in this issue,
Sure will assign points
Thanks
jayaDear ,
SAP standard purchase reg is not available
u have to develop it through ABAP
(i am sure vendor reg ur using it is also a ABAP dev check it out )
regards,
snb
Edited by: SNB on Feb 21, 2008 7:54 AM -
Very very urgent ( Revamp of rg1 register )
Dear all,
My client was updating the rg1 register, but the entries that were updated were wrong.
NOw i want rhe revamp the rg1 register, that is I wantto delete all the entries in J_1irg1 table , also i want to delete the entries from J_21irgbal and restart the process for this financial year totally fresh.
My question is is it possible to do the same. and if yes please give me the detailed procedure for doing it.
you will be rewarded with maximum points for your valuable answers.
deepak
Message was edited by:
deepak patilHi Prabudh
Check in J1ID whether against the respective material, you have maintained "Material and Chapter ID combination" with the Material Type "<b>F</b>"
Thanks
G. Lakshmipathi -
CAN ANY BODY EXPLAIN THESE QUESTIONS, VERY URGENT
WHAT IS THE USE OF CHAPTER ID, IN CHAPTER ID RATES WILL BE DETERMINES.
HOW MANY TAX CODES NEED CST, LST.
WHERE CAN I SEE EXCISE REGISTER
WHAT IS MEANT BY RG1 CAN ANY BODY EXPLAIN BRIEFLY, WHAT IS THE USE OF RG1
HOW DO I GET OPENING BALANCE FOR EVERY MONTH.
IN DEPOT SALES, IF CREATING EXCISE INVOICE A CERTIFICATED WILL ISSUE, IN A CERTIFICATE WHICH FIELDS WILL BE THERE.
WHAT IS MEANT BY JURISDICTION CODE & COUNTY CODE.
IN SD FACTORY SALES WHICH A/C ENTERIES GENERATED.
CAN ANY BODY EXPLAIN THESE FORMS, WHICH SITUATION THESE FORMS WE ARE USING. I NEED VERY URGENT.
a) A form
b) D form
c) C form
d) H form
e) DDP form
f) TR6 form
g) D3 form.
H) ARE.
I) ARE 1
j) ARE 2
IN DEPOT SALES PRICING PROCEDURE JFACT, WHICH CONDITION TYPES WILL COME,
IN FACTORY SALES PRICING PROCEDURE JFACT, WHICH CONDITION TYPES WILL COME
NOW WHAT IS THE VAT TAX.
what is the use of common distribution channel and common divisions
PLS FORWARD ANSWERS TO THIS MAIL ID.
i hope that definitely people will help
thanks every body.Dear vara prasad
You can take it for granted if you post so much questions in one thread like this, nobody will answer / clarify you.
So please make one thread per question.
Meanwhile, just I would like to clarify for few questions
1) The most important feature of chapter id is that based on this chapter id which you maintain in "Excise Tax Rate", all your excise tax rates will be flowing into your sale order / billing
2) If the rate of tax differs, then you need to maintain a separate tax code. For example, the LST / VAT in some state is 4%, and in some state it is 12%. So in this case, you need to maintain two tax codes
thanks
G. Lakshmipathi -
Excise Duty Value in Export Invoice - Very Urgent
Hi Gurus,
I have created a Export delivery & Billing Documents. I am trying to create Excise Invoice in which Excise Duty values are coming as "0". We are using TAXINN Procedure , ECC 6.0
Is there any specific note or any customization required for this ?
Due to this ARE1 is also giving "0" values & subsequent "0" value in Bond Register.
Can anybody help me on this ? It is very urgent.
Thanks in advance
VikasHi Vikas,
Could you help yaar ...if you got solution for it ..I am facing same problem..We are going live very soon,
help of ur's could help me lot ..My mail id [email protected]
Thanks in advanec in for your help.
regards,
Vijay Khochare -
Very Urgent!!!Calling custom OAF vent reg page from JTT page gives error.
1. We have a need to customize Oracle Marketing Online Event registration page (Oracle standard JTT page: amsEventRegistrantsEntryMain.jsp - available via function AMS_EVENT_REG_ENTRY) .
2. We have created a new custom OAF page for the event registration and modified the function definition Web HTML property from "amsEventRegistrantsEntryMain.jsp" to "jtfcrmchrome.jsp?
page=/oracle/apps/xxamw/xxams/event/webui/XXAmsEventRegScheduleCrePG&akRegionApplicationId=540&jttoijappn=OKL" (tried also with OA.jsp call)
3. Now when we click on the Register link from the base (This Oracle standard Register link calls AMS_EVENT_REG_ENTRY and since AMS_EVENT_REG_ENTRY is modified we expect OAF page to render) page it throws "You have insufficient privileges for the current operation. Please contact your System Administrator." error. The function is not accessible.
4. Navigation: Oracle Marketing Super User -> Marketing Online -> Event -> Registration Stb menu -> Search for a "Event Schedule Name" -> Click Go -> Click on Register link (We expect our custom OAF page when register link is
clicked)
Please note this design was tested successfully in an instance but when we migrated this to a new instance it fails. We cannot compare two instances since the previous instance no longer exists. Seems some issue with JTT menu straucture since we are using Oracle standard JTT function. This is a very urgent issue and any quick help or pointer will be great.
Thanks/ SantanuHi,
R u still facing the issue?
If So can you please tell me:
Have u added your called function to the current user? That means by navigating to the responsibility you can access the same page directly, with out doing any transaction? If so then create your custom function with your required URL and attach to a menu ; then check if you are able to view that page from the menu navigation?If these thing is not working then I think you need to create a custom page that will extend the std region , that time hopefully it will work.
Please post your result/thought!!
Regards
Apurba K Saha -
Hello people,
I've been given at the last minute a project at school where I need to do some data acquisitions (tensions) with a DAQ NI USB-6218 and it has
been miserable ever since, I first tried the "easy" way with DAQ assistant to save a given number of samples per channel to a text file
in order to use it in matlab, well...it isn't working : every time in my text file I have a different number of samples, I used the "Write to spreadsheet" function within a while loop where I wired the path outputs to a shift register in order not to have it asking me the path all the time,
but I'm still not getting the X number of samples per channel as specified at the beginning.
So I've been using another method with the DAQmx where I get each individual waveform into a vector of samples, when I look for the size
of the vector it looks Ok, 100 in my case but the problems start when I try to have a text file where each column will represent a channel for
subsequent matlab treatment, what I'm doing doesn't seem to be working, it's really unbearable, please help me sort this mess out.
I'll add both VIs as attachment so it can help you help me, thank you.
Basically what I need is to acquire 15 tensions with a given number of samples per channel (the same for each channel) and then plot it in matlab.
Note the first VI has switches to "unblock" each channel but it doesn't seem to be working, please look at both VIs.
It's very urgent, I could fail my school year if I fail this project.
Thank you very much for your help.
Attachments:
Projet EM acquisition - Copie.zip 78 KB
projet autre version envoyer sur forum.zip 20 KBHi Thank you very much for your help, in the meantime, I've changed the project to (see attachment), now
it is at least writing the waveforms to the txt file, but again there is an another problem, it seems to be ignoring the
number of samples I specified per channel, it seems to be writing into the txt file for as long as I keep the VI running.
What is missing ? Also I'd like to have a clock for my samples, that is when I plot in matlab I do not just plot random numbers, but the
physical analogical inputs as a function of time, that is for instance the first line corresponds to time 0, line 2 to time 0,001
ect...How could I do that ? For the meantime I got only 5 channels, when I know what my mistake is, I'll expand it to 15 channels.
Please help me.
Attachments:
acquisition 5 voies.zip 61 KB -
Error while opening a module. plz help me, very urgent.
when i try to open a module, the following error message appears on my screen.
" no j2ee component found in d:\krisp\programs\servlets".
i've installed bea in c: drive and my servlet program is in d: drive.
plz help me, it's very urgent.Can you provide some more information? What were you doing when this happened?
Can you post the entire error message?
-- Rob
WLS Blog http://dev2dev.bea.com/blog/rwoollen/ -
Need help, MMC tree got deleted, very urgent.
Hi,
My sap MMC tree, got deleted in the server. I have been trying to restore since 2 days and couldnt succeed, please help me.
1) i have uncared the sapmmc.sar from Kernal\NT\I386\MMC\sapmmc.sar file
2) i got about 7 files, in which there is one sapmmc file i have tried to double click it, n check but no go.
3) i also tried to run the Sapstartsrv.exe file and fill in up the values in pop up window. & filled up the following values :-
SID: DEV
NR: 00
StartProfile: (entire start profile path given)
user: devadm
passwd; (given)
- but it says "the account name is invalid or does not exist or the password is invalid for account name specified"/
- no go in both the cases.
Please need help very urgent.
Regards,
Satish.siva,
I am getting same error since 2 days
SID: DEV
NR: 00
Start Profile: (entire start profile path)
User: <hostname>/devadm
passwd: ****
Error:
cannot install service
create service failed:421
The account name is invalid or doesnot exist, or the passwd is invalid for the account name specified.
Edited by: satish c on Jun 4, 2008 11:12 AM -
How to write code for this logic in a routine, very urgent --help me
hi all,
i want to apply this logic into one subroutin ZABC.
here i m giving my logic ,can any body help me in coding for this, this is very urgent, i hv to submit on wednesday.
4.1 Read the company code number BSEG-BUKRS from document line item.
4.2 Fetch PRDHA from MARA into GV_PRDHA where MATNR = BSEG-MATNR.
4.3 Fetch Business area (GSBER) from ZFIBU into GV_GSBER where (PRDHA = GV_PRDHA and BUKRS = BSEG-BUKRS) OR (PRDHA = GV_PRDHA and BUKRS = SPACE).
4.4 If business area match is found, go to step 3.9. Else continue.
4.5 If BKPF-BLART IN set ZVS_POSDT OR BKPF-XBLNR starts with I0*, execute steps below. Else, go to Step 3.6.
i. MOVE: BSEG-BKURS TO work area field WA_ZFIBUE-BUKRS,
BSEG-MATNR TO work area field WA_ZFIBUE-MATNR,
GV_PRDHA TO work area field WA_ZFIBUE-PRDHA,
BSEG-HKONT TO work area field WA_ZFIBUE-HKONT,
BSEG-GSBER TO work area field WA_ZFIBUE-GSBER,
BSEG-PSWBT TO work area field WA_ZFIBUE-PSWBT,
BKPF-BUDAT TO work area field WA_ZFIBUE-BUDAT,
SY-DATUM TO work area field WA_ZFIBUE-CREDATE,
SY-UZEIT TO work area field WA_ZFIBUE-CRETIME,
Fetch running serial number (WA_ZFIBUE-SERIALNO) from ZFICO. This number will be stored in ZFICO with PARAMTYPE = "BPM030307", SUBTYPE = "ZFIBUE" and KEY1 = "SERIALNO". The actual serial number will be stored in the field VALUE1.
i. Insert WA_ZFIBUE INTO ZFIBUE.
ii. Send email notification to the user (if it is not already sent to user on the same posting date).
Use function module SO_NEW_DOCUMENT_ATT_SEND_API1 to send mail.
Fetch email address and date of last email from ZFICO. These values will be stored in ZFICO with PARAMTYPE = "BPM030307", SUBTYPE = "EMAIL" and KEY1 = "<USERNAME>". The email address will be stored in the field VALUE1 and posting date in VALUE2. Once mail is sent, VALUE2 is updated with latest posting date (BKPF-BUDAT).
iii. Increment the running serial number and update ZFICO with new serial number.
a. GV_ SERIALNO = WA_ZFIBUE-SERIALNO + 1
b. Update ZFICO Set value1 = GV_SERIALNO
Where PARAMTYPE = "BPM030307" AND
SUBTYPE = "ZFIBUE" AND
KEY1 = "SERIALNO".
iv Move VDFT to BSEG-GSBER.
v. Exit routine.
4.6 Fetch MTART into GV_MTART from MARA where MATNR = BSEG-MATNR.
4.7 If SY-BATCH = INITIAL AND GV_MTART <> ROH, issue the error message - Maintain the mapping of product hierarchy <PRDHA> from article <MATNR> for <BUKRS>. Else, go to step 3.8.
4.8 If SY-BATCH <> INITIAL AND GV_MTART <> ROH, issue the error message - Maintain product hierarchy on article master. Go to step 3.10.
4.9 Move GV_GSBER TO BSEG-GSBER.
4.10 Exit Routine
plz give me reply asap --this is very urgent
thanks in advance
swathiHi Swathi,
If it's very very urgent then you better get on with it, don't waste time on the web. Chop chop. -
Update Routine ... Help me Please--VERY URGENT
Hi All ,
I Moving data from Cube to ODS . Let me explain abt the records in the cube .
There are 6 key figures in the cube as well as dimensions, UNIQKEY TRANSACTION is One Dimension and ARTICLE is another dimension which is having an Navigational attribute called CORE ELEMENT.
I am showing the data with those two dimension and the key figures which are to be used in the routine.
Charc----
Key Figures
UNIQKEY-ARTICLE-Coreelement--
billqty
in base unit
A00N----1006330--1--
10.5
A00M -
1006320----2--
2.5
A00P-----1006330--1--
10.5
A00P-----1006320--2--
2.5
A00Q-----1006320--2--
2.5
A00Q-----1006340--3--
10.5
Now Lets see what the core element numbers mean,
core element 1 means -- fuel .
Core elemnet other 1 -- food .
I need to move these data into ODS Which will have an extra field called No of items in the transaction --ITEMS.For this i need to write a routine .
The Logic is ...
1.if Materail is of type 1(Means if the core element - 1)
I need to Populate the No of items in tnx = 1 .--ITEMS.
2.If Material is of type(Means if the core element)2or 3 I need to populate the billing quantity to the no of transcations.--ITEMS
3. If the Uniqkey tanscation contains two line items as suppose that you have 20 litres of fuel and 2 cans of coke, then No of Items in the transaction should be 3 and Billing Quantity in BUoM 22
billing quantity in BUoM = 20 litres for the first line item and 2 for the second line item...
then as the first line item is fuel, field No OF Items in the Transcation should be 1 (replacing the 20) + 2 = 3
so the final result in the ODS should be billing quantity in BUoM = 22 and The Items in the Transcation= 3
So the ODS Data should look like this.
UNIQKEY--billqty--
ITEMS
in base unit
A00N--10.5--
1
A00M--2.5--
2.5
A00P--13--
3.5
A00Q--13--
12.5
NOTE : IN the ODS only the UNIQKEY IS THE KEY FIELD and the rest are DATA FIELDS.
I Posted this one before also. But didnt get proper responses.
I am Pasting the piece of code which I have written . This code will work for the first two records in the cube , But it is failing for the UNIQKEY Transcation having Line items.
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: /BI0/PMATERIAL.
DATA: TITEMS LIKE /BIC/AZPOCODS00-/BIC/ZTITEMS,
CORE_ELEMENT like /BI0/PMATERIAL-RPA_WGH1.
$$ end of global - insert your declaration only before this line -
FORM compute_data_field
TABLES MONITOR STRUCTURE RSMONITOR "user defined monitoring
USING COMM_STRUCTURE LIKE /BIC/CS8ZPOCTUS04
RECORD_NO LIKE SY-TABIX
RECORD_ALL LIKE SY-TABIX
SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING RESULT LIKE /BIC/AZPOCODS00-/BIC/ZTITEMS
RETURNCODE LIKE SY-SUBRC "Do not use!
ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line -
fill the internal table "MONITOR", to make monitor entries
check not COMM_STRUCTURE-material is initial.
select SINGLE RPA_WGH1
INTO CORE_ELEMENT
from /BI0/PMATERIAL
where
material = COMM_STRUCTURE-material
and OBJVERS <>'D'.
IF CORE_ELEMENT EQ '1'.
TITEMS = '1'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = titems
IMPORTING
OUTPUT = titems
ELSE.
TITEMS = COMM_STRUCTURE-BILL_QTY.
ENDIF.
result value of the routine
RESULT = TITEMS..
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -
PLease give me ideas on how to acheive this . As I am not Aware of ABAP very well.. PLease try to give me the code. I hope one of you may got the same requirement before.
Its very urgent and I need to deliver it today itself.
Thanks in advance , you can mail me to [email protected]. If anybody intersted to discuss this Issue they can reach at +91 9845922955.Hi ,
While I am moving the data from cube to ods . I need to create the update rules with cube -- 8cube . WHen i am doing this the billqty is a key figure in cube so that is not a problem but the ITEMS is not there in the cube ,SO for that I need to write a routine to populate that one.
Its strange but the user what to analyse with the UNIQKEY transaction. And these objects will be added as navigational attributes to the Characteristic. as it acts as another dimension.
He wants to laod these from ODS to Master data -Characteristic.
to say for each transcation hpw many items are getting sold.
Message was edited by: Nagarjuna Reddy
ONce again thanks for the qucik replies
Message was edited by: Nagarjuna Reddy -
UPDATE ROUTINE --- CUBE --- ODS Very Very URGENT
Hi Collegues/Friends ,
First I need to thank for the intiators of this site , as I came to know that for many
problems we will get different best solutions ... Hoping the same I am posting a question
which is very very very urgent as the client is running after me for this .
My Requirement is as Follows. ..
I Moving the data from Cube to ODS . While i need to write a routine for an extra field in
ODS based on Billing Quantity in Base Unit of Measure . The Key Field in the ODS Is UNIQKEY
Transaction and It is a Characterstic in the Cube and we have MAterial as another
Characteristic and core element as navigational attribute .
In the Cube for every UNIQKEY transaction- there are more than One line items.
My data fields in the ODS are Billing Quantity in Base Unit of MEasure and and EXTRA FIELD
: No of Items in Transaction . But the thing is that I have only Billing Quantity in Base
Unit of Measure in cube as a key figure
BAsing on the UNIQKEY transcation and Billing Quantity In Base Unit Of Measure I need to
populate the No of Items in Transaction... For this i need to write a routine .
Let suppose say that for the Materials the core elements are as follows
Material Core element
10 1 -- fuel -- In liters
20 2 -- Cigar - in PAck
30 3 -- Coke - in Cans
Now Lets see how the records are there in InfoCUbe
Uniqkey / Material / Core element /Billin Quantiy
A / 10 / 1 / 22
B / 30 / 3 / 2
C / 10 / 1 / 15
C / 30 / 3 / 2
D / 20 / 2 / 10
D / 30 / 3 / 2
And IN the ODS -- I need to Populate the No OF items in Transaction.
the Logic behind this as follows .
1.if Materail is of type 1(Mean if the core element - 1)
I need to Populate the No of items in tnx = 1
2.If Material id of type 2 or 3 I need to populate the billing quantity to the no of
transcations.
3. If the Uniqkey tanscation contains two line items as suppose that you have 20 litres of
fuel and 2 cans of coke, then No of Items in the transaction should be 3 and Billing
Quantity in BUoM 22
billing quantity in BUoM = 20 litres for the first line item and 2 for the second line
item...
then as the first line item is fuel, field No OF Items in the Transcation should be 1
(replacing the 20) + 2 = 3
so the final result in the ODS should be billing quantity in BUoM = 22 and The Items in the
Transcation = 3
For this I have Written a Rouinte like this for that field
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: /BI0/PMATERIAL.
DATA: TITEMS LIKE /BIC/AZPOCODS00-/BIC/ZTITEMS,
CORE_ELEMENT like /BI0/PMATERIAL-RPA_WGH1.
$$ end of global - insert your declaration only before this line -
FORM compute_data_field
TABLES MONITOR STRUCTURE RSMONITOR "user defined monitoring
USING COMM_STRUCTURE LIKE /BIC/CS8ZPOCTUS04
RECORD_NO LIKE SY-TABIX
RECORD_ALL LIKE SY-TABIX
SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING RESULT LIKE /BIC/AZPOCODS00-/BIC/ZTITEMS
RETURNCODE LIKE SY-SUBRC "Do not use!
ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line -
fill the internal table "MONITOR", to make monitor entries
check not COMM_STRUCTURE-material is initial.
select SINGLE RPA_WGH1
INTO CORE_ELEMENT
from /BI0/PMATERIAL
where
material = COMM_STRUCTURE-material
and OBJVERS <>'D'.
IF CORE_ELEMENT EQ '1'.
TITEMS = '1'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = titems
IMPORTING
OUTPUT = titems
ELSE.
TITEMS = COMM_STRUCTURE-BILL_QTY.
ENDIF.
result value of the routine
RESULT = TITEMS..
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -
Does it satisfy all the conditions ?? mentioned above if . As far As i know as the only key
field in the transcation it will satisfy the first two conditions .
I want to know or If possioble anybody pls take some pain for me to send the code or any
Ideas for satisfying all the conditions.
Hope I will get immediate replies....
Mail me to [email protected]Reddy,
Please do not post in all sections ... makes it hard to follow up on posts..
Arun -
Open items for purchase order its very urgent
hi
my requirement is to write extract program for purchase order(me21) to extract only open items.
please provide sample code its very urgent.
thanks in advance.
points will be rewarded.
thanks
hari prasad reddycheck the below report :
REPORT ZMM_OPEN_PO_REPORT no standard page heading
line-size 255
message-id zwave.
======================================================================
Program Name : ZMM_OPEN_PO_REPORT *
Description : This report displays all Open PO Items and output *
would be PO Number,Material number and so on *
Author : Seshu *
Date : 01/24/2007 *
MODIFICATION HISTORY *
DATE | AUTHOR | CHANGE # | DESCRIPTION OF MODIFICATION *
--|||--
01/24/07| Seshu | DEVK921979 | Initial *
D A T A D E C L A R A T I O N P A R T ***
type-pools
type-pools : slis.
Tables
tables : ekko, " Purchase order Header
ekpo, " Purchase order Item
marc. " Material with Plant data
Internal table for output.
data : begin of i_output occurs 0,
ebeln like ekko-ebeln,
matnr like ekpo-matnr,
end of i_output.
ALV Data declaration.
data : v_repid like sy-repid.
ALV Function Module Variables
DATA: gs_layout type slis_layout_alv,
g_exit_caused_by_caller,
gs_exit_caused_by_user type slis_exit_by_user.
DATA: gt_fieldcat type slis_t_fieldcat_alv,
gs_print type slis_print_alv,
gt_events type slis_t_event,
gt_list_top_of_page type slis_t_listheader,
g_status_set type slis_formname value 'PF_STATUS_SET',
g_user_command type slis_formname value 'USER_COMMAND',
g_top_of_page type slis_formname value 'TOP_OF_PAGE',
g_top_of_list type slis_formname value 'TOP_OF_LIST',
g_end_of_list type slis_formname value 'END_OF_LIST',
g_variant LIKE disvariant,
g_save(1) TYPE c,
g_tabname_header TYPE slis_tabname,
g_tabname_item TYPE slis_tabname,
g_exit(1) TYPE c,
gx_variant LIKE disvariant.
data : gr_layout_bck type slis_layout_alv.
Ranges
ranges r_eindt for eket-eindt.
initialization.
v_repid = sy-repid.
start-of-selection.
Get the data from EKKO ,EKPO and MARC Table
perform get_data_tables.
end-of-selection.
display the data in the form of ALV
perform display_data.
*& Form get_data_tables
Get the data from EKKO,EKPO and MARC Table
FORM get_data_tables.
clear : i_output.
refresh : i_output.
fill the dates in ranges
r_eindt-low = sy-datum - 7.
r_eindt-high = sy-datum + 14.
r_eindt-option = 'BT'.
r_eindt-sign = 'I'.
append r_eindt.
Get the data from EKKO,EKPO and EKET Tables
select aebeln bmatnr into table i_output
from ekko as a inner join
ekpo as b on aebeln = bebeln
inner join marc as c on cmatnr = bmatnr
inner join mara as d on dmatnr = bmatnr
inner join eket as e on eebeln = aebeln
and eebelp = bebelp
where c~beskz = 'E'
and c~werks = '1000'
and d~mtart = 'FERT'
and b~loekz = space
and b~elikz = space
and e~eindt in r_eindt.
if sy-subrc ne 0.
message e000(zwave) with 'No open purchase order found'.
endif.
ENDFORM. " get_data_tables
*& Form display_data
text
FORM display_data.
Fill the Fiedlcat
PERFORM fieldcat_init using gt_fieldcat[].
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = v_repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = g_user_command
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = gr_layout_bck
IT_FIELDCAT = gt_fieldcat[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = g_save
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IT_EXCEPT_QINFO =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = i_output
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " display_data
*& Form fieldcat_init
text
-->P_GT_FIELDCAT[] text
FORM fieldcat_init USING e01_lt_fieldcat type slis_t_fieldcat_alv.
DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
Purchase order number
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'EBELN'.
LS_FIELDCAT-ref_fieldname = 'EBELN'.
LS_FIELDCAT-ref_tabname = 'EKKO'.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Purchase Order'.
ls_fieldcat-seltext_M = 'Purchase Order'.
ls_fieldcat-seltext_S = 'Purchase Order'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
Material #
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'MATNR'.
LS_FIELDCAT-ref_fieldname = 'MATNR'.
LS_FIELDCAT-ref_tabname = 'EKPO'.
LS_FIELDCAT-TABNAME = 'I_OUTPUT'.
ls_fieldcat-seltext_L = 'Material'.
ls_fieldcat-seltext_M = 'Material'.
ls_fieldcat-seltext_S = 'Material'.
APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
ENDFORM. " fieldcat_init -
Communication b/w SAP and VB .exe file - Very urgent.
hi,
I am currently in a project implementing SAP for a cement manufacturing company. Here we have a VB .exe file which takes parameters and return values. now we need to connect this to application to SAP R/3 to pass data to that application and access the data from that .exe file.
Note: we don't have any source code for that vb .exe file its a third party software.
Its an very urgent one....
please guide me how to do it with all steps.
Any material please pass to [email protected]
Thanks in advance.form grosswt .
refresh itab3.
clear itab3.
Executing VB EXE file to get the weight from weigh bridge
call function 'WS_EXECUTE'
exporting
DOCUMENT = ' '
CD = ' '
COMMANDLINE = ' '
inform = 'X'
cd = 'C:\SAPWEI'
program = 'C:\sapwei\MyVB.exe'
STAT = ' '
WINID = ' '
OSMAC_SCRIPT = ' '
OSMAC_CREATOR = ' '
WIN16_EXT = ' '
EXEC_RC = ' '
IMPORTING
RBUFF =
EXCEPTIONS
FRONTEND_ERROR = 1
NO_BATCH = 2
PROG_NOT_FOUND = 3
ILLEGAL_OPTION = 4
GUI_REFUSE_EXECUTE = 5
OTHERS = 6
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Fetching Value from VB text file
call function 'WS_UPLOAD'
exporting
CODEPAGE = ' '
filename = 'C:\sapwei\w1.txt'
FILETYPE = 'ASC'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
tables
data_tab = itab3
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
loop at itab3.
v1 = itab3-num.
pgrwt = v1.
endloop.
message 'Save Gross Weight' type 'S'.
endform. " grosswt -
Manula Clearing of GR/IR a/cs -- very urgent
HI peers
How to do manual clearing of GR/IR a/cs. Plz explain me in detail how to do it. Also let me know the T.Code to clear it. Very Urgent.
Regards
RajaramHi,
U will clearning of GR/IR account to use t.code f.13. if you clearning same account for grouping u use t.code f.19
then will solve your problem
regards
cvsreddy
Maybe you are looking for
-
Hi, Is it possible to display a pie chart using BSP.The piechart want to viewable in internet (URL) Can anyone help me with step by step procedure.
-
can i re-download a movie without being charged again
-
How do I save files from iPad to Dropbox without connecting to computer?
I understand how to move files from iPad to a computer using email or ITunes. I would like to be able to save a word processing file directly from my iPad wirelessly to my Dropbox folder. I have tried several apps without success, including Pages Cop
-
Fit on screen all dashboard page reports
Hi all! I'm starting in OBIEE 11g, so I need your help! Our issue is that we need "resize" all reports that are in Dashboard's pages as "fit on screen" mode. Now, for example, we have 4 analysis in a Dashboard's page but it page has scrolls. So we ne
-
Mirror display 4S for Windows 7
Hello, i bought iPhone 4S some month ago, but cant set up display mirroring on my big monitor screen (i mean my PC with windows 7 x64). Is it possible to play for example GTA or something else on iPhone but with image on PC screen?