Very weird and frustrating problem.

I have a 160gb classic and I went to plug it in earlier and nothing happens, it didn't show up in itunes. I clicked my computer and under devices with removable storage its there, but just called removable disk (F: )) and I click on it and nothing is in there!
And so I unplug and plug my iPod back in again, and on the ipod screen it says that it is connected, and before I get the chance to do anything (it still doesn't show up in itunes) It says that its ejecting! And then it acts asif it isn't plugged in - I get the menu on the ipod screen.
And then in itunes it says my ipod might be corrupt and that I should restore.(the ipod still acts asif its not plugged in/connected) And the picture of the ipod is white.
So I click restore, and then it says it couldnt be restored, an unkown error occurred!
I've tried reinstalling itunes, holding down menu and select and everything.
I don't know what is going on, but can anyone help me??
Thanks!
EDIT: Ok, I just got it working on my brothers pc and I restored it. Then I plugged it into my pc and it still connects then says its ejecting (iTunes still isn't picking it up either) I'm thinking it must be something wrong with my pc.
But someone please help, this is horribly frustrating.
Thanks

I would 1st return it for a 100% refund. Now purchase an identical unit. This keeps your options open at least for the next 14 days (depending on the stores return policy).
I bought an ipod classic 160gb and its cord was hypersensitive to slight movement. I plugged it in, it said "connecting" then it suddenly didn't connect and said "ejecting". I couldn't safely disconnect and had to just yank out the cord. This froze up the ipod and I had to reset it in order to get the ipod to fire back up (which I understand you've already tried).
This is why I say return it and rule out the possibility of it being bunk junk.

Similar Messages

Best buy, please help me on this! very disappointed and frustrated!!

Here is my complaint:
1.I have been saving for weeks trying to buy this flat screen TV: the price has been $299.99
http://www.bestbuy.com/site/westinghouse-48-class-48-diag--led-1080p-hdtv-black/6233067.p?id=1219198...
Then finally this Tuesday I went there to buy, I checked the online price, it jumped to $329.99. I do have a mover coupon which is good for 10% off a single item. So I used, but I will have been really happy if I could have used it when the price is $299.99 instead. This mover coupon said any single item with some exclusions and I believe this Westinghouse 48" is not in the exclusion list.
After I bought Tuesday, I checked the price online today, man, it went back to $299.99. Your price mathcing policy said if the price lowered within the return period, we could get the difference back. Then I went back to the Best Buy at Fairlawn, Ohio (Montrose) location where I bought my TV. But they refuse to return the difference saying I used that coupon.
But key issue here is not using the coupon. That coupon DOES NOT SAY anything about not using on a sale item at all!!!!!
If I return the TV today and they give me back that coupon, I would have been able to buy this one again at $299.99 AND using that coupon again! So It is very UNFAIR they are doing that.
Very disappointed and frustrated. Please help me to get this issue straightened out!! I follow all the rules, but that store clerk did not seem to understand that coupon is good for on sale items too and that TV is not on the exclusion list so they should follow the price matching promise and issue me the credit!!!!!!

here is the detail of this mover coupon:
http://www.bestbuy.com/site/regularcatpcmcat322300050002/movers-coupon/pcmcat322300050002.c?id=pcmca...
It does not have Westinghouse TV mentioned in the exclusion list and I donot believe it is a UMRP product!
Offer valid in store only.
Excludes Unilateral Minimum Resale Price (UMRP) products, gift cards, services (both in-store and in-home), Marketplace & special order items. Not valid on Best Buy.com. Not valid in Puerto Rico. No dealers. No copies. No cash back. No cash value. Limit 1 coupon per transaction. Limit 1 coupon per customer. Coupon required at time of purchase.
Products in the following categories are excluded from this offer:
Projectors, DSLR cameras, Compact System Cameras, lenses & flashes; subscription software services, digital music services; music & eReader download cards; Unlocked phones; contract mobile phones; and mobile broadband devices. Select premium: TVs from LG, Samsung, Sharp and Sony; Blu-ray players from LG, Samsung and Sony; home audio products from Samsung and Sony; Select Sony camcorders, digital cameras, NEX cameras; & headphones, set top boxes; Canon XA & XF series camcorders and G1X, S110, G16 cameras; Nikon Coolpix A & P530 cameras; Wacom tablets & stylus; Apple branded accessories for iPhone, iPad, audio and computing.
Products from the following brands are excluded from this offer: Bose®, Beats by Dr. Dre, Polk Audio, Denon, Boston Acoustics, Breville, Dyson, Go Pro, Leap, Philips; Electrolux. These brands and products available through Magnolia are excluded: Arcam, Bowers & Wilkins, JVC, Kaleidescope, Martin Logan, McIntosh, Oppo, Peachtree, Pioneer Elite, Rotel, Savant, Sennheiser, Sharp, Sonance, Sonus Faber, Universal Remote Control™ and special order merchandise. These brands and products available through Pacific Sales Kitchen & Bath are excluded: Bosch, Bertazzoni, Dacor, DCS, Fisher & Paykel, Jenn-Air, Lynx, Monogram, Sub-Zero, Thermador, U-line, Vent-A-hood, Viking, Wolf.

Mac suddenly very slow and other problems

Since a few days ago I've been experiencing the following problems:
+ VERY long startup time (more than four minutes vs. about a minute previously).
+ When starting an application, the system frequently hangs for a few seconds. (While it's hanging, sometimes the process is marked "doesn't react" in Activity Monitor).
+ Everything feels much slower and less responsive than it used to be and I'm frequently getting the spinning pinwheel.
+ Parallels doesn't start any more. After double-clicking the Parallels desktop icon, the icon jumps up and down in the dock for a little while and then just disappears.
The problem may or may not be related to the removal of my Bootcamp partition, which I did shortly before the problems started to occur. I don't remember if the problems started immediately after the removal of the Bootcamp partition but I think it's likely that there is a connection.
I did lots of things to find the cause and solve the problem, to no avail:
+ Made sure that after the Bootcamp removal the Mac HD is selected as the start volume.
+ Checked the HD using Disc Utility (no errors found)
+ Repaired permissions using Disc Utility
+ Created a new user account (problem persisted)
+ Cleared system caches
+ Ran various checks using Onyx (no problems found)
+ Deleted PRAM by starting up and pressing ALT-CMD-R-P
+ Checked for viruses (no viruses found)
+ Unplugged all USB devices
+ Reinstalled OS X ("archive and install")
None of this helped.
Observations:
+ I tried to start in safe mode but that made the startup procedure even slower, I was seeing the Apple logo and the grey spinning wheel for almost 10 minutes alone.
+ According to Activity Monitor there's always lots of free memory and CPU power.
I'm really clueless as to what else I could do other than wiping the HD and reinstalling everything from scratch or sending the machine back to Apple. Any ideas would be *very much appreciated*!

Hard to believe, the problem is back!
Everything worked just fine last night. This morning I turn the iMac on and the problems are back: Extremely long time to startup, application hangs, everything super slow.
Any ideas?
I restarted in verbose mode and took some pictures, in case that helps...
http://gallery.me.com/cjanz#100008

Very random and frustrating iPod problem

I've had my 80GB classic for 2 years, no problems. Yesterday, after uploading new music I noticed my iPod was completely empty. iTunes gave me no warning message so I thought it was just a random bug.
But now I cannot transfer any music to my iPod. Earlier today it asked me to run a disk check on my iPod to repair it, which I did, and have tried transferring music with no success. Everytime I connect my iPod it tells me it cannot be read and to restore it to factory settings. I do that, but at a random point in the transfer process, it will give me the "error 69" message and stop.
The weird thing is it does this with RANDOM songs. And it's not new songs I just downloaded. The most recent one was for a song I've had for the entire 2 years I've had my iPod! Another odd thing is that the transfer process is INCREDIBLY slow. I have 75GBs of music and it took me 3 hours to get halfway through... and then give me the error message and delete all my progress. Right now, I'm transferring one song a second when before it was at least 25 times as fast before it suddenly stopped working yesterday.
Anybody have any solutions? I've deleted the songs that keep popping up, but like I said, it's random songs, not recently downloaded songs only. I have successfully transfered music ONCE; I tried uploading one album as a test so I didn't waste my time uploading 75GB and it worked. But then I transfered the rest of my music and got the same **** error.
Is it the actual disk inside the iPod that's damaged?

*Check your iPod with Diagnostics Mode*
It's possible that your iPod's hard drive has started to fail. Take your iPod and place your right thumb on the centre SELECT button and your left on the top MENU button. Press down both thumbs for about 6 seconds until your iPod reboots. Immediately move your left thumb around to the rewind button |<< on the left and hold this down together with SELECT for a further 6 seconds. Your iPod should now switch into Diagnostic Boot mode. Press MENU for *Manual Test*, then select *IO > HardDrive > HDSMARTData* to reveal your stats. For comparison here are mine for my 2 year old 6th Generation Classic:
Retracts: 889
Reallocs: 12
Pending Sectors: 0
PowerOn Hours: 2202
Start/Stops: 894
Temp: Current 24c
Temp: Min 10c
Temp: Max 50c
Take a note of your results. When finished press *SELECT & MENU* for 6 seconds to reset the iPod again.
With modern disc drives sectors are no longer marked bad by a disc scan, if the SMART firmware detects a sector it has trouble accessing it will attempt to invisibly reallocate it to a spare area of the disc.
Note that I've only 12 remapped sectors and none pending. To help explain what the numbers mean here is an extract from the Wikipedia S.M.A.R.T. article:
*Reallocated Sectors Count*
Count of reallocated sectors. When the hard drive finds a read/write/verification error, it marks this sector as "reallocated" and transfers data to a special reserved area (spare area). This process is also known as remapping, and "reallocated" sectors are called remaps. This is why, on modern hard disks, "bad blocks" cannot be found while testing the surface – all bad blocks are hidden in reallocated sectors. However, as the number of reallocated sectors increases, the read/write speed tends to decrease. The raw value normally represents a count of the number of bad sectors that have been found and remapped. Thus, the higher the attribute value, the more sectors the drive has had to reallocate.
*Pending sector count*
Number of "unstable" sectors (waiting to be remapped, because of read errors). If an unstable sector is subsequently written or read successfully, this value is decreased and the sector is not remapped. Read errors on a sector will not remap the sector (since it might be readable later); instead, the drive firmware remembers that the sector needs to be remapped, and remaps it the next time it's written.
Large numbers of Reallocs or Pending Sectors would suggest your drive is failing and that you may need to repair or replace your iPod. Check your stats after another attempt to update your iPod. If the numbers increase that again points to hard drive failure. While it won't be good news at least you'll know it isn't some random software problem and you can decide what to do next.
<hr>
Assuming the diagnostics give the drive a clean bill of health it may still be worth checking the drive for logical file system errors.
*Check iPod hard-drive for errors*
Hold Select+Menu on the iPod for about 6 seconds until it resets, then hold Select+Play as soon as the Apple logo appears, again for about 6 seconds to put the machine in disk mode. Open iTunes and in the Sync tab of the preferences menu check *Disable automatic syncing of all iPhones & iPods*. Now connect your iPod to the computer, wait until it connects, then close iTunes. Browse *My Computer* and right-click on the drive for the iPod, click Properties, then click Tools. Under Error-checking, click *Check Now*. Under Check disk options, select *Scan for and attempt recovery of bad sectors* (Optional - takes ages but a good idea if you've reason to suspect physical damage). Click Start. Mac users should run *Disk Utility / Repair Disk* for the equivalent process. This should find and correct any errors in the logical & physical structures of your iPod's hard drive. Once these have been fixed you can reset the iPod (hold Menu+Select ) and should stand a better chance of a successful restore. It might also pay to check the status of the source drive containing your media, particularly if no errors were found on the iPod.
And if that still doesn't help try Erase your iPod - The Super Fix for most iPod Problems. Basically a low level format of the iPod’s hard drive to get around whatever problems are stopping iTunes from restoring it.
Once you've restored your iPod don't rush to dump all the data back exactly as it was before. I have found that lots of large or complex smart playlists can sometimes trigger constant reboots or dumping of the iPod's library. In addition, larger transfers can fail leaving data in an inconsistent state. Try this technique for populating the iPod in stages.
*Break up large transfers*
In iTunes select the menu item *File... New Smart Playlist*. Change the first drop-down box to Playlist, the next to is and the next to Music. Tick against *Limit to*, type in say 10, then change the drop-down to GB, and set the last drop-down to artist. When you click OK you can enter a name for the playlist, e.g. Transfer. Now sync this playlist to your iPod rather than your entire library. When the sync is complete modify the rule ( *File... Edit playlist* ) to increase the size by your chosen amount, then sync and repeat. You can experiment with different size increments, if it doesn't work just choose something a bit smaller until it works each time. Before long you should have all your music on your iPod. Once that's done you can move on to other media such as podcasts, videos, photos, playlists etc.
tt2

My iPod Touch was acting very weird, and now the sleep button is unresponsive

Just yesterday morning, my iPod didn't turn on.
When I tried to turn it on, it didn't turn on, so I went to itunes to try to restore it. I downloaded the 700MB update, and left for school, leaving the iPod at home. I came back to find the screen turned on, however, it was acting very very strange. At first, I thought the battery was dead, even though I fully charged it the day before. First when I'm using it, the screen blacks out, flashes, and it constantly asks me to slide to power off, when I didn't press anything. Did a hard reset, and an update/restore, but it didn't fix the problem.
Afterwards, I noticed that the strange behavior stopped. Everything was functional again, except this time, the sleep button no longer works. I press the power button, and nothing happened. I can't even do a hard reset. I can't turn it off. The button isn't stuck though.
I don't know what's going on, but I need my sleep button, because if anything happens to this iPod, I won't be able to reset it. I restored it twice, and the issue was not resolved.
If anyone knows how to fix it, please tell me. I really need the sleep button. Just keep in mind that the sleep button is unresponsive, and I won't be able to do a reset.
If not, can you recommend me an ipod app that can put your ipod to sleep instead of using the button?

Unfortunately, I don't think it solved the problem. I believed the new iPod thing solved the weird behavior problem, but after that the button stopped working.
Do you know how to contact Genius? Because I don't think I can find a store in my area, when I tried to.

VERY weird OVM networking problem

First, this may have nothing to do with OVM, but the problem I'm seeing is happening on all FIVE of my VM servers. I can't even guess what's going on. Maybe you have seen this and solved it, or maybe you can suggest what I can do to debug this.
Here are the details:
I have a 3-node cluster, built from brand new IBM x3650 M4 servers. I have a 2-node cluster, built from old retired IBM xSeries servers that used to be VMWare ESX servers. My office is on another subnet from the data center network that contains all 5 servers. I see the following symptoms occasionally and randomly (I see it at least once a day, and can make it happen multiple times a day if I keep trying):
1. When I SSH to one of these boxes, sometimes the session will freeze. At other times, the session will work perfectly, but after exiting the SSH session, any subsequent attempt to ping or connect via TCP from my desktop to that server will absolutely fail. That is, ping, traceroute, and ssh (and presumably, everything) failes.
2. If I don't try to communicate with that server for several minutes (maybe 5 to 10 minutes, I'm not sure), and then try to ping or SSH to the box, it works again!
3. However, if after, say, exiting SSH, and finding that I can't ping the server, if I keep pinging (from Windows, I say "ping -t -w 5000 vmserver") the pings will fail FOREVER. I have left it pinging for 24 hours, and it would never answer a ping. But then if I stop the pinging, wait ten minutes, and ping again, it works. I swear.
4. During the time that I am unable to ping one of VM servers from my desktop, if I try to ping that same server from another desktop machine in my office, connected to the SAME little 4-port switch, it works perfectly.
5. This is ever more weird: During the time that my desktop 1 cannot ping server1, say, I can go go desktop 2 (right beside desktop 1), open an SSH session to server1, and from there, I can ping desktop1. I swear.
Why would I think this is an Oracle VM problem, you ask? Well, I wouldn't, except that I have other servers in that data center, that run ESX, and AIX, and Windows, and I've tried like hell to make one of them exhibit one of these symptoms, and I cannot do it.
If you have any ideas about what the heck is going on, I'd appreciate hearing them.

Doesn't sound like a VM problem to me. Sounds like you either have a spanning tree loop or you've got a lot of packet collisions causing issues.
I don't know how much you know about networking but a spanning tree loop is when you have multiple paths connected to the same physical network without using load balancing or multipathing. You can have multiple connections between physical networks but it must be configured properly or you'll have one link come up and the other go into blocking mode. you'll never know which one it might be. That is.... if the links have the same cost. Thus you get a "loop". If the ports are "floping". You'll have times when its up and times when its down. Your network admin should be able to see if the spanning tree is constantly be rewritten. That is a sure sign you have a network loop.
You said you have a 4 port switch? If that switch is set on a port that's set to do "portfast" then the switching fabric will never learn what's behind that switch. You just can't plug a switch into a network and expect it to work. Again, I don't know what you know about networking so don't take it the wrong way.
Packet collisons happen when you have a link between equipment where one side negotiates to a different speed than another. Say one side is 100 half duplex while the other end is 1000G Full duplex. You get massive amounts of collision and it will only get worse the more traffic you try to pass. Again. You mentioned a 4 port switch. You should never assume that switches will ever negotiate at the same speed on each end of the connection. Cisco has historically recommended that inter switch links be hard code to avoid 'negotiation" issues. Its not a big a difference in 1 gb siwtchiing and 10 gb switch but if you have a 100 mb 4 port switch hooked into a 1gb link..... that might be your problem. Just some thoughts.
IF you really were having a VM issues. The cluster heartbeat would be causing the VM servers to constantly reboot. So I don't think its on you servers. Probabily between you and the servers.

Very weird green blinking problem!!!!!!!

hi! i had my shuffle a few days ago.my prolem is this...
my pc is AMD AthlonXp 2600+ ecs kt-600 usb 2.0 but when i connect my ishuffle it only blinks green... checked and even reinstalled my os but nothing... iknow that theres no problem with my usb coz iam currently using 1 msi bluetooth, webcam, usb cardreader, IR, and usb wifi... i also tried removing all my usb comps with a fresh OS but still no luck.
THE weird thing is i have also an old PC amd756 athlon700 usb1.1 out of curiosity i plugged my shuffle and BOOM!!!!! it is detected the only error is "usb hi-speed connected" can you guys give me a possible explanation for this??? i think i have tried everything but nothing seems to be working for my current pc... thnx....

Hi,
I recommend connect the iPod shuffle to another computer and try to Restore it with the latest iPod updater http://www.apple.com/support/downloads/ipodupdater20051012.html
http://docs.info.apple.com/article.html?artnum=300701 ==== Restoring iPod shuffle
USB 2.0 is only required for charging the iPod shuffle it should work when connected to a USB 1.1
Also check the Battery Status
http://docs.info.apple.com/article.html?artnum=300553
If the issue is not resolved then send the iPod shuffle for service at
http://depot.info.apple.com/ipodshuffle/

Very weird dialogue box problem

I have been running a 24" IMAC since summer without any problems. We use an older MAC for a server in our office. A couple of days abo my save as and open dialogue boxes developed this weird problem. When I double click on a folder on our server the other folders and files within that folder appear under the original, as if you had turned one of those arrows around only there are no arrows. This is only happening on one hard drive but all programs. It is also only affecting the IMAC other (laptop and G5 etc.) are working fine.
I reintalled OS tiger yesterday but it did not solve the problem and now several of my other programs won't work. I can reinstall them as well but I still need to solve this problem.
I was wondering if deleting preference files would help. I am afraid to try this because I don't know much about it and don't want to make the situation worse.
Any help would be appreciated.

I have been running a 24" IMAC since summer without any problems. We use an older MAC for a server in our office. A couple of days abo my save as and open dialogue boxes developed this weird problem. When I double click on a folder on our server the other folders and files within that folder appear under the original, as if you had turned one of those arrows around only there are no arrows. This is only happening on one hard drive but all programs. It is also only affecting the IMAC other (laptop and G5 etc.) are working fine.
I reintalled OS tiger yesterday but it did not solve the problem and now several of my other programs won't work. I can reinstall them as well but I still need to solve this problem.
I was wondering if deleting preference files would help. I am afraid to try this because I don't know much about it and don't want to make the situation worse.
Any help would be appreciated.

Very weird signal strength problem

Hello everybody, I have a rather unique problem with a linksys range expander. I have successfully set one up at my home and am presently trying to set one up for a friend. I set everything up in every possible way I knew how (I had a lot of experience after trying to set up my own)and I believe the range expander is set up correctly however in Wireless connection status it is still showing the signal as very low. BUT if I click view wireless networks, it shows the network as having excellent signal strength! I know that distance is not an issue as the adapter and range expander in my house is set up at more than twice the distance of my friends and it still receives excellent signal. Thus I'm inclined to think that something else is causing this problem, since I also have tried moving the range expander in case something was blocking it, to no effect. I'm wondering if anyone else has had this problem and if anyone has any ideas for a fix? Thanks!

If the Range Extender is showing two blue lights & from the wired computer you are able to ping 192.168.1.240........ we can assume that range extender is working fine ......
Let me know on wireless computer which utility you are using?
Message Edited by oook on 11-14-2007 04:31 PM

IPod not syncing, very strange and different problem compared to others

I have an 80 GB iPod Classic, when i plug it in to sync with my computer. The computer makes the noise showing that the computer recognizes a USB port being used, however iTunes immediately freezes up while the iPod sits in limbo on its screen saying Connected while showing the Sync sign. While the iTunes is frozen, nothing happens and it does not change until I unplug the iPod. It doesn't matter how long I leave it for. When i unplug the iPod the device menu finally shows in iTunes however it doesn't do any good because the iPod is no longer plugged in. Instead it shows the DEVICE menu in the background with an error message saying either "The iPod "Customer's iPod" cannot be found. The required file cannot be found" or that with a (-53) error message at the end. I have tried many different things including system restore and still does not work. I have tried different ports, different cords. I really don't know what I can do from this point. I have installed and uninstalled iTunes 8.1.

Use the SHIFT-Launch iTunes method to get iTunes waiting for a library. Stick the iPod in disk mode and connect to the computer. Browse *My Computer* and right-click on the drive for the iPod, click Properties, then click Tools. Under Error-checking, click *Check Now*. Under Check disk options, select *Scan for and attempt recovery of bad sectors* (Optional - takes ages but a good idea if you've reason to suspect physical damage). Click Start. Mac users should run *Disk Utility / Repair Disk* for the equivalent process. This should find and correct any errors in the logical & physical structures of your iPod's hard drive which may be causing the problem. When the process is complete disconnect the iPod and then reset it (hold Menu+Select ). Cancel the waiting iTunes dialog and then try to connect in the normal way.
If that still doesn't work you could try Erase your iPod - The Super Fix for most iPod Problems. Basically a low level format of the iPod’s hard drive to get around whatever problems are stopping iTunes from working with it.
Have you tried connecting the iPod to another computer to see if the issues is focused on the iPod or iTunes?
tt2

A extremely weird and crazy problems trying to install Quicktime

For the last couple of hours I've tried every angle to try to fix this problem. Now the crazyiest part of this is not only can I not install Quicktime but I can't even download a file that has "quicktime" in the name. If I try to download any version of Quicktime that has "Quicktime"(all of them) in the name, it finishes and I try to open it, and I get a msg "(filename) doesn't exist. It may have been renamed, moved or deleted...". So the only way I can download the installers is if I change the name to something random, I get the error msg even if I rename the file "QU".
The main issue is when I try to install Quicktime, with Itunes or Standalone I get a runtime error "This application has requested to terminate in a ununsual way" I have searched the forum and have tried every fix, from Regedits to virus scans you name it. I went to oldversions.com and I couldn't even download version 3.
The other crazy part is that after i get the runtime error message and hit "ok" Quicktime completely disappears from my computer. On some of the older versions I don't get a error msg, it installs, I hit "finish" then I try to go where I installed it to and every single time it disappears, i've tried to install it on the Desktop, external harddrives, etc. but its never their. I'm usually able to fix problems like this but this one is just unbelievable so I more then appeciate any help I can get with this, thanks.

Pasucal:
The behavior you are seing suggests a virus or system corruption of some kind. The best way to get back up and running may be to perform a repair installation of Windows. There are steps for performing a repair installation of Windows XP on the Microsoft support site here. There are several other sites on the web that have more information about Windows repair installs. Here is one you might want to review.
Keep in mind that repairing Windows will not remove malicious programs from your computer. After the repair, you will need to update and run a full scan with known-good anti-virus software.

Very weird report server problem

Hello gurus,
I'm currently facing werid problem.My report server status is UP and running.But I try to access the showjobs url, the page shows *500 internal server error* or cannot bind to report server errors.
I have enabled traces and actually found out that report sever engines are actually running,picking up reports,creating DB connections,formatting pages and dumping into cache folder,like everything normal.All traces show no error or abnormality.
rwdiag command also shows my report sever exists.
I can't understand how is this possible.Please guide me..
I think the problem is with the rwservlet?I'm sure rwclient and rwrun would run successfully as well..
anyone..
Edited by: anandk on Jan 9, 2011 1:00 PM
Edited by: anandk on Jan 10, 2011 10:55 AM

Hi there
Just would like to know if you have change some file configuration like httpd.conf,rwservlet.conf or ias.porperties?
Actually you report server is running file but this is host naming issues.
Provide me what you did so i can help.
Thanks

Here's a weird and wonderful problem that would mean so much if somebody could help!

Ipod: 5th Generation Video (Classic)
The Problem: Essentially what I am trying to do is recover photos off my Mum's old Ipod. She imported these photos onto the Ipod directly from her camera at the time (2006) so they were never saved on any computer. There are about 500 photos of a family holiday. It means so much to me to get these off now because my Dad passed away earlier this year and I want to surprise my Mum with these photos which we haven't properly been able to see for about 8 years now.
The Ipod does turn on, I am able to see the photos, but here's the issue: when I connect the Ipod to my computer, whether in normal mode or disk mode, Itunes freezes, the internet cuts out, and (if in disk mode) when the Ipod shows in 'My Computer' as a removable disk in F: drive, I cannot gain access into it - the window just freezes. Essentially, the whole computer jams up, but is instantly fine again as soon as I disconnect. I am therefore unable to remove these photos off the Ipod.
This is pretty much my last resort. I cannot even tell you how grateful me, my brother and mum would be if anyone was able to help me fix this problem.
I will try and answer any questions fully and speedily
Many thanks in advance

Thanks for the reply Curt,
I have tried both suggestions and it does appear to be part my computer and part the Ipod's problem. I tried switching and plugging into another computer (Macbook Pro) and although the internet did not cut out, Itunes still froze/refused to start up and although the Ipod was found in the USB tree, it wasn't showing up in Finder. This appears to be the common theme - the computers are finding the Ipod, but not being able to fully connect with it

Very weird 64 bit problem

Initially I was running 2.4 in 64 bit mode on my Mac. Everything worked perfectly for a week or so. Then today, after messing about in the Web Module, I am not able to type in text fields. No characters appear even though if I'm outside of LR the keyboard is working perfectly. It recognises arrows presses and if I select text and hit a key it deletes the text but doesn't replace it with the letter I pressed.
If I then go into 32 bit mode it works with no problems. I've tried rebooting the machine but no matter what I do if I go into 64 bit mode I can no longer type text in the fields.
Any suggestions pls?

Sorry I can't be of any help, but I also have similar problems. I also have the mouse scroll preference problem, applications which were removed from the dock which reappear, sidebar items which won't go away or can't be set to appear(Finder Preferences check boxes), and desktop background settings which won't hold. These are actually not on my account, but for other users on the same computer. Removing preference files from ~/Library doesn't seem to fix it as it comes back.
I thought it might me related to Parental controls, but I'm not sure yet.

Really weird and annoying problem

When I double click on a waveform (I forget the name of that small window that comes up), and play back just that one audio object in that window, it acts like it has a really extreme gate on it, only letting through very loud sounds, while the rest is just quiet. This is extremely annoying because I want to edit certain parts, and I can't find out what I need to select because I can't hear anything. Suggestions?

(I forget the name of that small window that comes up)
Sample Editor
does it sounds like it's double the speed from the original?distorted?
is it an apple loop the audio you trying to open in the sample editor?
powerbook G4 Mac OS X (10.4.6) Logic Pro 7.2, FW410 m-audio

Very weird and frustrating problem.

Similar Messages

Maybe you are looking for