Very weird behavior...

Hi,
I'm adding a line to the Sales Order Matrix by C# code.
Everything looks normal, the line is added and a focus on the ItemCode on the RowCount
Now if I type any item directly in SAP, it writes the item but it also write it on the previous line with it's description as if SAP did not know that Iadded a line by code and seems confused.
SAP 8.81 Pl09
I thought it was my code somewhere but I even did a small test which is stopping the code in VS after the code added the line and tried and the state of the grid is still confused as no code is running and when I type a new item at the last line it does the same thing, changing the line the code added with the code I enter directly in SAP
Here's explained differently.
1) I have 4 line in the Sales Order matrix.
2) An automatic code add a new line at the bottom by pressing a button
3) I then enter myself an item at the bottom but after TAB of this item SAP writes it also at the line that was added automatically
I don't get it. Maybe it's the way I add a line but I just set an itemcode in the cell by code as the last line is always ready for a new item. Is there something i don't understand ?

Hi Marc,
This is because SAP has a deliberate design change:
You can check :
Focus when setting value in system matrix
Re: Focus after Setting a Form Value within the Validate Event (>=8.8)
Regards

Similar Messages

Images Problem in Firefox -- very weird -- please help!

Hi all, I need your help here with ideas...
I have built a site that is 100% Flex, full size. It uses images in two different ways: Image controls and HTML text. Both are populated dynamiccally from XML resources.
In IE, these all work perfectly. But I get some very weird behavior in Firefox.
I have a list with a custom item renderer using Images. When the user clicks on the list, a pop-up Canvas is displayed with the same image and an Text area with htmlText in-line Images. In Firefox, these images do not populate -- neither the table nor inside the text -- but the text shows perfectly, even spaced around where the image would be.
But elsewhere in the application, I have an Image control populated the same way, except driven by a datagrid selection, and that one WORKS FINE. I also have other Text areas using htmlText, populated the same way, and the in-line Images work great there in Firefox.
What is going on???

I think I figured it out.
The slashes in the image paths went the wrong direction. \ in stead of /
Apparently, this is no problem for IE, but chokes Firefox. Keep an eye out.

Weird behavior by APD

Hi Guru's
I am observing very weird behavior in one of the process chain at APD step.APD step is getting failed due to lack of logs and due to this chain status is changed to failure in work-load automation screen.But without my intervention this step finishes successfully by getting logs after few minutes.Now we have to change chain status to success in WLA to run further dependent loads.Could anybody help me out in this aspect to avoid unnecessary change in its status and how it is picking up logs.
Thanks!!!
Kuldeep

Logs not found --> Could it be due to table space issue? Did you have a look at the parameters? Is there a short dump in ST22? Ideal solution would be to fix the logs not found issue. We can also think about work arounds to restart the process chain automatically after the APD finishes successfully. But may be you can work with your basis team to see if it is table space related issue.

Weird behavior in Classic or not?

It has been a long time since I've needed to use Classic (on 10.4.something) Today I needed to do something that could only be done in classic. I thought I saw some weird behavior so I tried a couple of other classic apps.    All started Classic just fine, brought up their document window and menu bar. But there was no classic desktop under the app's window and while the menu bar showed "finder" as an open application that could be switched to (the right-most menu item) but when I switched to it I got the OS X finder, not a OS 9 one.   Occasionally I can get what looks like a Finder menu bar, but that's on it are the Apple and Help and the app switcher.
Recently I've been playing with Sheepshaver on a Snow Leopard system, which brings up an honest-to-goodness OS 9 desktop.
Now, I am misremembering how Classic works (in effect, no desktop and no finder) or is something wrong. I checked all three of my systems running Tiger and they have the same behavior.   (A G4 -- that will still boot into OS 9, a powerbook G4, and a mac-mini.)
Ted Lee
Minnetonka, MN

OK, I found an article on rebuilding the desktop and it indicated that while there is a file for the OS9 desktop, in the classic environment it is invisible and can only be found through an alias that is created on the OS X desktop. I suspect I've deleted that alias since I didn't have any particular need for it.   The article tells you how to re-create the alias from the terminal. indeed there is a folder there and it is empty. No particular use for it -- if you select Desktop from an OS 9 app you get the OS X desktop.   I can also see why there's no real OS 9 finder -- anything you could have done from it you can do from the OS X finder -- except the "Apple Menu" and that's why that's under the classic icon on the right half of an OS X menu bar. There still is a "rebuild desktop" in the Classic prefs -- I assume that's so you get the right doc/app association in the classic environment, since I don't think OS X understands the classic creator/type info.
So sounds very much like I'm misremembering!
Ted Lee
Minnetonka, MN

Weird behavior in opening Aperture images in Photoshop

I have found a lot of really weird behavior when opening Aperture images in an external editor (in my case, Photoshop, so I'll use PS to refer to it):
1) If the master image is opened in PS, a new version is created when the file is opened, not saved. So quitting PS without saving leaves you with a new version of the file, regardless of whether you actually saved any changes or not.
2) If a version (not the master) is opened in PS, a new version is not created, either on open, or on save. So in other words, changes to that version in PS when saved overwrite that version, and the previous condition of that version is lost (with respect to versioning).
3) If multiple versions of the same image are opened simultaneously in PS, there doesn't seem to be a way to tell the difference between them in PS, except for visually (possibly meta-data, but I haven't checked that, nor would I want to be forced to). The file names of all versions are exactly the same.
I'm looking for feedback from anyone out there who can explain why this isn't completely quacky version control. I've been using version control almost my entire career (as a software programmer) and here's how I have seen almost invariably version control work:
1) New versions of files are always created upon commit, i.e. saving of the file, not on opening a file. (Do not confuse this with working copies, think about what is present in the repository).
2) Opening / editing any file version is never destructive. Any change to that file version that is saved (committed) results in a new version, not an overwrite to the same version.
Aperture's interface basically has combined what traditional version management has represented separately, that being the client and repository views of a project. They are showing all versions of a file simultaneously. This is fine, but I'm really not liking the fact that some changes create new versions, other changes overwrite versions, and one case, merely opening the file creates a new version, whether there are any changes saved or not. In addition, when working with multiple versions in the editor, the file name and/or interface doesn't give any indication of what version you are working with. Easy to say that's the fault of the external editor, but I disagree -- all external editors are going to work with filenames, so Aperture should produce a unique namespace for any file version so that any external tool will be able to distinguish (visually) one file from another.
Is this completely wacky version management, or is it just me?
Brad
Powerbook G4-1.33GHz-17" / Powermac G4-1.4GHz Mac OS X (10.4.2) PB: 1GB RAM, Radeon 9600-64MB / PM: 1.25GB RAM, Radeon 9000Pro-128MB

Hi Bradley,
Due to the way I personally use Photoshop, I want Aperture to behave as it does.
That's because, with Photoshop, I use layers extensively. Any edits I do (levels, curves, saturation, sharpening) I do on layers. I can delete the layers at any time (or select to show or hide them). Because of this, I actually WANT Aperture to behave the way it does. Once I've done a bunch of edits in Photoshop, if I select again to edit that file in the external editor, I want to work on that specific file (to add another layer, or change one). I don't want another duplicate. I tinkered with this over the weekend, and it worked very nicely for me.
Perhaps you work differently from within Photoshop? Do you ever use layers? If I were to have a bunch of Photoshop "versions," each with 5 layers, I'd have like 5 GB of "versions" for my original 8 MB RAW file, due to the size of PSD files. Yuck

TLF 2/2.1/3 Weird behavior with floating graphics?

Hi guys,
I'm working on a chat application running on RED5 / AS3 and I'm struggling to get my client "UI" working perfectly.
My problem is related to the TL Framework, on every version available.
Basicly, I want to display a picture ( for user messages ) and icons ( for notifications ) on the left side of my lines, like this :
So, I'v been messing around with "float=start", "float=left" and such, but i'm always encountering weird behaviors whenever I scroll or resize my containerController. It's quite easy to reproduce with the following code :
public class Main extends Sprite
          private var controller:ContainerController;
          public function Main():void
                    if (stage) init();
                    else addEventListener(Event.ADDED_TO_STAGE, init);
          private function init(e:Event = null):void
                    stage.scaleMode = StageScaleMode.NO_SCALE;
                    stage.align = StageAlign.TOP_LEFT;
                    removeEventListener(Event.ADDED_TO_STAGE, init);
                    var holder:Sprite = new Sprite();
                    addChild( holder );
                    var tFlow:TextFlow = new TextFlow();
                    for ( var i:int = 0; i < 50; i++ )
                         tFlow.addChild( createLine() );
                    controller = new ContainerController( holder, 400, stage.stageHeight );
                    tFlow.flowComposer.addController( controller );
                    tFlow.flowComposer.updateAllControllers();
                    stage.addEventListener( Event.RESIZE, resizeController );
          private function resizeController( e:Event ):void
                    controller.setCompositionSize( 400, stage.stageHeight );
                    controller.textFlow.flowComposer.updateAllControllers();
          public function createLine( ):DivElement
                    var d:DivElement;
                    var p:ParagraphElement;
                    var im:InlineGraphicElement = new InlineGraphicElement();
                    im.source = new Bitmap( new BitmapData( 16, 16, true, 0x30FF0000 ) ); // 0x30 Alpha
                    im.float = "left";
                    d = new DivElement();
                    d.clearFloats = "both";
                    p = new ParagraphElement();
                    d.addChild( p );
                    p.addChild( im );
                    return d;
Basicly, I'm stacking 50 transparent "floating" elements. It works fine most of time, but if I randomly resize my Flash Player Window, I can get the first "invisible" element to overlap the last "visible" :
It seems to be happening right when the last "floating" element should disappear. Instead, it gets "over" the previous one. It happens upon container resize and scrolls. I'v encountered this issue on lastest 2, 2.1 and 3 TLF builds.
Beside the visual "bug", it also screws up my container.getContentBounds().height calls - which can make scrolling "trembling", as the height gets reajusted.
I'm running out of ideas about how to handle this. This bug appears whenever I use "floating" graphics and I can't think of any other way to display graphics on the left side of my chat-lines.
Maybe someone ran into this very problem and figured out a way to make it work?
Excuse my english, thanks in advance,
Lionel.

Thank you for your report. And I have found the root cause.
In BaseCompose.as
protected function composeFloat(elem:InlineGraphicElement, afterLine:Boolean):Boolean
if (!floatFits && (_curParcel.fitAny || _curParcel.fitsInHeight(totalDepth, int(logicalFloatHeight))) && (!_curLine || _curLine.absoluteStart == floatPosition || afterLine))
                floatFits = true;
The condition of if is true, only when the weird behavior happens. We need to discuss about how to fix it.

URGENT Please help with weird behavior of test suite

Hi All,
I have a composite involving three operations of two different services. The weird behavior comes by the time on which I run the test suite on the EM, if I try to emulate two different operation response from one service, by the time that the flow, tries to emulate the second one, I always receive this error:
part name="summary">
<summary>oracle.fabric.common.FabricException: javax.wsdl.WSDLException: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.</summary>
</part>
On the other hand if I emulate two responses of the same operation it works.
Does any one have any idea of how to deal with this kind of test? Which seems a very simple test.
Best regards,

Hi thanks for your response, in detail my problem is as follows:
1- I have a simple composite with two services and three invokes, all of the operations are two ways operations. Here´s the BPEL (Service1 Demandas, operation Actualizar; Service 2 Aviso, operations buscar, actualizar):
<scope name="SINAUT_Aviso_SRV_Demandas_Actualizar">
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:pattern patternName="bpelx:automated"/>
<bpelx:analysis>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:50 AM</bpelx:property>
<bpelx:property name="BusinessId">Scope_151babe7-bc1e-11df-3ca0-0015c5fce8ce</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<sequence>
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:analysis>
<bpelx:property name="BusinessId">Sequence_151babe7-bc1e-11df-3ca0-0015c5fce8ce</bpelx:property>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:50 AM</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<assign name="Assign_1">
<copy>
<from variable="inputVariable"
query="/client:process/client:input/idDemada"
part="payload"/>
<to variable="Invoke_2_actualizar_InputVariable"
part="payload" query="/payload/demanda/idDemanda"/>
</copy>
<copy>
<from variable="inputVariable"
query="/client:process/client:input/estadoDemanda/codigo"
part="payload"/>
<to variable="Invoke_2_actualizar_InputVariable"
part="payload"
query="/payload/demanda/estadoDemanda/codigo"/>
</copy>
</assign>
<invoke name="Invoke_2"
inputVariable="Invoke_2_actualizar_InputVariable"
outputVariable="Invoke_2_actualizar_OutputVariable"
partnerLink="SRV_Demandas"
portType="ns2:SINAUT_Aviso_SRV_Demandas"
operation="actualizar"/>
</sequence>
</scope>
<scope name="SINAUT_Aviso_SRV_Avisos_Actualizar">
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:pattern patternName="bpelx:automated"/>
<bpelx:analysis>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:57 AM</bpelx:property>
<bpelx:property name="BusinessId">Scope_c235386b-bc1f-11df-3ca0-0015c5fce8ce</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<sequence>
<bpelx:annotation xmlns:bpelx="http://schemas.oracle.com/bpel/extension">
<bpelx:analysis>
<bpelx:property name="BusinessId">Sequence_c235386b-bc1f-11df-3ca0-0015c5fce8ce</bpelx:property>
<bpelx:property name="LastUpdateDate">9/10/10 9:35:57 AM</bpelx:property>
</bpelx:analysis>
</bpelx:annotation>
<assign name="Assign_2">
<copy>
<from variable="inputVariable"
query="/client:process/client:input/ReferenciaPly"
part="payload"/>
<to variable="Invoke_1_actualizar_InputVariable"
part="payload" query="/payload/aviso/referenciaPlyAviso"/>
</copy>
<copy>
<from variable="inputVariable"
query="/client:process/client:input/estadoAviso/codigo"
part="payload"/>
<to variable="Invoke_1_actualizar_InputVariable"
part="payload" query="/payload/aviso/estadoAviso/codigo"/>
</copy>
</assign>
<invoke name="Invoke_1"
inputVariable="Invoke_1_buscar_InputVariable_1"
outputVariable="Invoke_1_buscar_OutputVariable_1"
partnerLink="SRV_Aviso"
portType="ns1:SINAUT_Aviso_SRV_Avisos"
operation="buscar"/>
<assign name="Assign_4">
<copy>
<from expression="'12345'"/>
<to variable="Invoke_3_actualizar_InputVariable"
part="payload" query="/payload/aviso/referenciaPlyAviso"/>
</copy>
</assign>
<invoke name="Invoke_3"
inputVariable="Invoke_3_actualizar_InputVariable"
outputVariable="Invoke_3_actualizar_OutputVariable_1"
partnerLink="SRV_Aviso"
portType="ns1:SINAUT_Aviso_SRV_Avisos"
operation="actualizar"/>
</sequence>
</scope>
2- My test suite is as follows:
<wireActions wireSource="SINAUT_Aviso_PR_DemandasActualizar_TO_BE_/SRV_Demandas" operation="actualizar">
<emulate duration="PT0S">
<message>
<part partName="payload">
<content>
<payload xmlns=""/>
</content>
</part>
</message>
</emulate>
</wireActions>
<wireActions wireSource="SINAUT_Aviso_PR_DemandasActualizar_TO_BE_/SRV_Aviso" operation="buscar">
<emulate duration="PT0S">
<message>
<part partName="payload">
<filePath>prueba_busqueda.xml</filePath>
</part>
</message>
</emulate>
</wireActions>
<wireActions wireSource="SINAUT_Aviso_PR_DemandasActualizar_TO_BE_/SRV_Aviso" operation="actualizar">
<emulate duration="PT0S">
<message>
<part partName="payload">
<filePath>prueba_actualizar.xml</filePath>
</part>
</message>
</emulate>
</wireActions>
3- When the test suite executes the second operation of the second service it throws this exception:
<bpelFault><faultType>0</faultType><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>oracle.fabric.common.FabricException: javax.wsdl.WSDLException: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.: WSDLException: faultCode=OTHER_ERROR: Error writing stream: java.io.IOException: Can only write attribute within a tag.</summary></part><part name="detail"><detail>Can only write attribute within a tag.</detail></part></remoteFault></bpelFault>
4- if I change the second operation with the first one(buscar), it doesn't throws any exception.
5- If this is a limitation , how can I test a composite that involves n operations of the same service?
Kind regards and thanks for all of your support

Weird behavior when switching from windows to mac

I encountered a very strange behavior that I thought all of you should be aware of, and maybe one of you has an answer for me.
Let me begin by saying I have a MacBook Pro with a 24GB windows partition.
I was working in windows and I restarted to go into mac. The typical mac login window then appeared and I typed in my password as usual. Once my desktop, menu bar, and dock came up, the dock and menu bar disappeared almost immediately, and then it would go back to the mac login window. It would repeatedly do this no matter how many times I logged in.
By the way, it might be important to add that I only had about 12-15% battery remaining.
Anybody know what's happening here?
If not, maybe I should notify apple?
Thanks a lot
p.s. I didn't know if this was a problem with MacBook Pro or boot camp, so I posted it in both forums. So don't get all upset about that like some of you sometimes do.

OK now I plugged in and switched back to mac and it is working properly...
I think this is a weird problem...

Wireless keyboard weird behavior (useless)

Hello.
Today I cleaned up my wireless keyboard with a tissue and a little of alcohol but after I cleaned the keyboard starts to have a weird behavior: The keys are not working, other keys are like stuck and depressed and other just does not respond.
The keyboard is useless like that.
I will let it dry well until tomorrow to see if it works. The batteries are new.
Any help will be very useful.
Thank you.

If alcohol got inside the keyboard you may have ruined it however only time will tell. If it does going forward it's OK to use isopropyl alcohol however put it on a rag or cotton ball and use that to rub the keyboard clean.
Roger

Visibility weird behavior after -Syu

Hello
I have been using visibility with openbox on my Arch 64 system for a long time and have been very pleased with both. I just did a full system update yesterday and have been experiencing a weird behavior on visibility ever since.
Usually when I clicked on an application on a different desktop than mine I was transported to that desktop and the application was focused.
Since the system update , whenever I click on an application on a different desktop, that application is moved to my current desktop. Meaning that if I actually clicked on every app running on every other desktop, they would all be moved to my current desktop. Weird and impractical if you ask me.
I am suspecting it has something to do with an upgrade on openbox ? I checked whether some new option/setting was installed on the config file but didn't notice anything.
Anyone else experiencing the same effect ?

Maybe one can easily change the visibility code to do it right ?
Problem is, i have NO knowlege about how this stuff works. Plus, i dont now c++
But i browsed through the code and found a file called 'window.cc' with this code:
bool Window::activate(void) {
255 Server * server = Server::instance();
256 XEvent event;
257 long mask = SubstructureRedirectMask | SubstructureNotifyMask;
258
259 event.xclient.type = ClientMessage;
260 event.xclient.serial = 0;
261 event.xclient.send_event = True;
262 event.xclient.display = server->display;
263 event.xclient.window = drawable;
264 event.xclient.message_type = server->net_active_window_atom;
265
266 event.xclient.format = 32;
267 event.xclient.data.l[0] = 2;
268 event.xclient.data.l[1] = 0;
269 event.xclient.data.l[2] = 0;
270 event.xclient.data.l[3] = 0;
271 event.xclient.data.l[4] = 0;
272
273 if (XSendEvent(server->display, server->root_window, False, mask, &event)) {
274 return true;
275 }
276 return false;
277 }
and in 'server.cc' i found this:
28 // set up atoms
29 net_active_window_atom = XInternAtom(display, "_NET_ACTIVE_WINDOW", False);
So what i think is, one need to change the 'Window::activate(void) ' function to first switch desktop and then activate the window.
Maybe this is total nonsense ... i dont know
Haench

My iPod Touch was acting very weird, and now the sleep button is unresponsive

Just yesterday morning, my iPod didn't turn on.
When I tried to turn it on, it didn't turn on, so I went to itunes to try to restore it. I downloaded the 700MB update, and left for school, leaving the iPod at home. I came back to find the screen turned on, however, it was acting very very strange. At first, I thought the battery was dead, even though I fully charged it the day before. First when I'm using it, the screen blacks out, flashes, and it constantly asks me to slide to power off, when I didn't press anything. Did a hard reset, and an update/restore, but it didn't fix the problem.
Afterwards, I noticed that the strange behavior stopped. Everything was functional again, except this time, the sleep button no longer works. I press the power button, and nothing happened. I can't even do a hard reset. I can't turn it off. The button isn't stuck though.
I don't know what's going on, but I need my sleep button, because if anything happens to this iPod, I won't be able to reset it. I restored it twice, and the issue was not resolved.
If anyone knows how to fix it, please tell me. I really need the sleep button. Just keep in mind that the sleep button is unresponsive, and I won't be able to do a reset.
If not, can you recommend me an ipod app that can put your ipod to sleep instead of using the button?

Unfortunately, I don't think it solved the problem. I believed the new iPod thing solved the weird behavior problem, but after that the button stopped working.
Do you know how to contact Genius? Because I don't think I can find a store in my area, when I tried to.

Apple Banned me, because of a very weird problem with my "Factory Unlocked"

Hi Everybody! Im having a very weird problem with my unlocked iphone 4.
First of all, i would like to apologize because of my english, is not very good. My native language is Spanish.
Well.. Im from Mexico, and here we can buy the iphone Unlocked on the Apple Online Store.
Here's my problem. Apple has exchanged my iphone 3 times.
I returned the iphone the first time because the screen was totally yellowish, other than that everything was working great!, that was by the end of September.
On October 20th, i recieved my second iphone, and then a bigger problem started .
Before i continue, let me give you this information: here in Mexico we have basically 3 cell phone companies
1.- Telcel
2.- Movistar
3.- Unefon
OK, now on october 20th, i recieved my second iphone, and then procced to activate via itunes using my UNEFON sim card (microsim).
And every time i tried to activate it, only got this message onscreen:
http://i148.photobucket.com/albums/s2/jorgelomeli/Screenshot2010-10-29at24915PM. png
I though something was wrong with my brand new factory unlocked iphone 4.
I have 4 more simcards from my brothers (they all had iphone 4 too)
I tried telcel sim card, and i could activate my iphone. Then i insterted the Movistar microsim, and it worked too!! But then when i put the Unefon sim, the itunes logo inmediatly appears on the screen asking to activate on itunes, and when i tried that, the only response i got was the image above saying " The Simcard inserted on this iphone does not appear to be supported"
Weird thing here is, that, when i put my Unefon sim card on my brothers iphone 4, it worked great! on all of them, internet 3g, phone, wireless , evrything!
I called apple support, and they exchange the iphone for another one.
I recieved the third iphone on October 29. Last friday. and guess what? SAME PROBLEM! different serial number, same week production (week 42) but exactly the same message on itunes.
Very, very frustrated, i called apple again, and after 1 hour with thechnical support, they told me " We are sorry, but we can only offer you, your money back, NO MORE EXCHANGES FOR YOU"
I said why?... i dont want my money back! i want an UNLOCKED iphone!, but they refuse to give me another iphone.
When i asked techincal support, why my unefon sim card worked great on all three of my brothers iphone but not on mine, he just told me, "I really dont know, i guess they just got lucky" ****, this answer put all my trust i had on apple products for years, right on the garbage.
Since they refused to give me another iphone, i accepted my money back, and inmediatly after i finished the call, i asked my brother to buy me one more time an iphone 4 using his name, and his credit card. Now i have to wait until November 8-12 to recieve my new iphone, hoping this time i get a REAL UNLOCKED iphone, and not a partially unlocked iphone.
btw. i even went to Unefon costumer service and bought a new prepiad line, with a new microsim, just to be 100% sure that this problem is not because of the sim. And again didnt worked on my iphone, but it worked on any of my brothers iphone4.
Serial numbers of the 3 iphones:
79039C0U* (this one worked great with Unefon, only problem was yellow screen)
85042GR4*
81042FJB*
What do you suggest me? any info would be really aprecciated
FYI i also restore 4 times the last iphone and nothing seemed to work, i use 3 different computers, Macbook Pro, iMac, and an Hp with Windows 7, and the same message on all three computers.
Wierd thing also, one of my brothers bougth an iphone 4 this last week too, but he bought the 16Gb not the 32Gb. His iphone production week is 42 also! and when i put my Unefon sim in his iphone works great!
I dont know what else i can do, I just need to have faith that my new iphone coming this november will be real unlocked, but what if i'll recieve an iphone and then the same problem?? time for android? just kidding really guys, what can i do? anyone with similar problem like me? i dont wanna use Telcel or Movistar, i wanna use Unefon, and thats why i bought an Unlocked iphone
btw: jailbreak is not a solution for me, because i always like to use legal software on all my apple products, and because of the warranty.

According to http://support.apple.com/kb/HT1937, there are two official carriers in Mexico (Movistar and Telcel) and neither carrier offers an unlocked phone.

Weird behavior in master-detail

Dear Forum,
I need to implement an application but I still have a halting error.
I have this strange problem and I'll try to explain.
I have this masterscreen with search functionality. When I do a search, I get a result. When I now enter the details screen of the second row of the search result and I change the fields on the details screen and do a commit, I get the message that the changes were made successfully, but I see the primary key jump to the value of the primary key from the details of the first row of the search results on the masterscreen.
And when I look at the details of the first row, the changes were made in this details, and NOT in the details in which I needed to make the changes.
And now more weird... I can only reproduce the problem in Internet Explorer and whatever I try, it works correct in Firefox.
So the functionality should work as supposed, as it wouldn't work in Firefox.
Has anyone encountered this problem before or does anyone has a solution or tip to get to the solution?
Your help is much appreciated.
Arjen

Steven,
When I tried to create the logs you requested, I ran up to a different problem, also affecting this behavior. When I repaired this, still the weird behavior took place in Internet Explorer. And in Firefox the problem was solved. So I tried to disable the cache in Internet Explorer. This solved the problem there as well..
So this behavior doesn't happen anymore with the cache disabled, thus solved this problem.
Thanks for the effort anyway.
Arjen

Weird behavior in UCCX 7.0.1 SR05

Hi team,
I've got a weird behavior in a UCCX 7.01 SR05 installation.
All incomming calls which go to an agent who is set "ready" set the agent to state "not ready" and go to queue...
This behavior also occurs with standard script icd.aef.
Had anybody has same behavior in an UCCX 7 installation? Or can anybody help me? I checked my configuration twise and couldn't find
any issue.
Thanks a lot,
Tobias

I've seen this happen before because of a CUCM configuration issue. Check whether the CUCM Calling Search Space for the UCCX CTI ports can call the partition of the agent's extension. My guess is that the call attempts to connect but CUCM will not allow it to go through. UCCX then marks the agent as "Not Ready" and drops the call back in queue.

Duplicated text in TO, CC, BCC lines (very weird...)

I'm using Mail 3.1 on 10.5.1 and it was fine for weeks, but now... not so much. I'm not even sure what to look for to solve my own problem, so I'm hoping to get some help. So here's what happens when I type anything into any of these fields. Let's say I'm emailing "Joshua", and to help illustrate the issue I'll put each keystroke on a new line:
j = j
o = jjo
s = jjojos
h = jjojosjosh
u = jjojosjoshjoshu
a = jjojosjoshjoshujoshua
If I press any of the arrow keys, delete or tab it will just iterate the last "letter". That is to say:
keystrokes j,o,s,[delete],[delete],[delete] = jjojosjosjosjos
As you can see, this is pretty inconvenient... A coworker told me he had a similar issue with iChat, so I have hope there's a fix out there! I've since switched to Thunderbird, but boy, that is one miserable app...
Thanks.
p.s. I also sometimes experienced beach balls when downloading new mail and then full on crashes every time, but uninstalling GrowlMail (seems to have) fixed that.

do you have/use, by any chance plug ins or also input managers - such as grammar or spell check. These are known to cause some issues in Leopard and may in be incompatible. If you do I would advise you get rid of them and see if that solves your problem.
also you could log in as another user and try if you can duplicate that weird behavior, if not, then your issue may definitely be user specific.
Let me know what you find.
hope this helps

Very weird behavior...

Similar Messages

Maybe you are looking for