Very weird noise...

I was using photoshop on Windows with my MacBook Pro and all of a sudden I hear this noise that sounds like it's loading something. Most of you know that with a MacBook Pro that when loading takes place you can hear it in the centre / left side. Usually the only noise that is coming from the right is when you insert a CD. I have no CD's in my drive and I never heard this sound before. It just randomly started happening, never moved / bumped my MacBook, was just using photoshop.
The noise would get louder then it would slow down stop for 5 seconds, then go back up... and it's freaking annoying.
Should I System Restore or something? I have no idea what to do.

For some reason it's not letting me edit so I keep having to reply. Anyways, when it's not making the weird noise from the right side, it now makes this deep quiet noise in the centre, it sounds like an idle engine, literally. What is happening to my laptop all of a sudden!?

Similar Messages

  • MacPro Making VERY Weird Noises, Anyone Have any ideas?

    For the past few days I have been processing and editing a recent job. This weekend the MacPro began making some very irritating and strange noises.
    Here is what happens;
    I am sitting there editing when all of a sudden I hear one of the hard drives rev up, then it sounds like a small hammer is dropped onto a concrete surface and bounces twice, then I hear beep, beep from inside the MacPro.
    A few minutes latter; drive rev up, ping ping like a hammer bounce, then two beeps.
    This goes on and on every few minutes......it's friggen killing me.
    Anyone have an any ideas? Maybe a hard drive dying? Thing is, I never heard this before this weekend.

    Hard drives in the newer Macs are very quiet. Are you sure you are hearing a drive spin up and not a fan kicking in? It sounds to me the most likely culprit is a misbehaving fan. Make sure you have the latest SMC firmware installed on your Pro. Here is Apple's download site with info on the update:
    http://www.apple.com/support/downloads/macprosmcfirmwareupdate.html

  • Re: Weird noise coming through USB using Audio Mixer on Satellite C870-1EX

    Hello!
    So, my sister has Satellite C870-1EX and she's using new Audio Mixer with intergrated sound card that sends sound through USB cable to the computer (computer recognizes it as external sound card/device). This is the device: http://alesis.com/multimix8usbfx .
    Few weeks ago she started noticing a very weird noise, sort of high-pitched hissing noise, like very fast electronic beeping. Something similar to what good old internet modems did when they were connecting to the phone line, just not that loud and a bit faster.
    Firstly, obviously, we tested every single setting on the Audio Mixer.
    Then, we got new USB cable and swapped it.
    After that we also took down the whole equipment, checked all cables, untangle them if needed, swapped power source, checked different recording software, even tried some other USB recording devices etc etc.
    None of that helped. Drivers are all there as well.
    Here's the catch. I used the same equipment with same settings on my computer and ... no hissing noise at all. The thing is, any setting we tried, that hissing noise stays the same, nothing changes.
    Even if you pre-apply some sound FX that should either boost or reduce any kind of noise in the signal that is sent to the USB port of the computer, that hissing noise stays the same.
    What worries me is that something is wrong with the hardware of my sister's laptop.
    The noise does not appear if we use, for example, microphone that uses 3,5mm jack or laptop's built-in mic while recording stuff in the same recording session with same software and similar settings (considering some must be different due to different input).
    However, the noise appears if we use any external USB recording device on any of her ports.
    Windows on her laptop were reinstalled some time ago (now she's on Windows 7), but the problem appeared few weeks later.
    As I said before, drivers are all there and up-to-date as well.
    So, I'm hoping one of you will come up with a (simple) software sollution ... and hopefully we won't need to take her computer back to the shop.
    However, as far as it seems now, the latest is more likely to happen.
    Please, tell me I'm wrong :)
    Thanks!

    Hi
    A friend of mine has had an similar issue using an DJ Controller : Traktor Kontrol S4
    It was not a noise but he noticed some stutter and audio drop-outs.
    The problem was the background processes which were running while using the controller.
    In order to solve this it was needed to disable all possible devices in device manager like WLan, LAN, Bluetooth, etc
    Additionally he had to disable the Antivirus software and firewall which was running in the background.
    I dont know if it helps you but I think its worth a try
    One further idea: try to reduce the CPU performance. This can be done in Win 7 power management.
    How to handle the power managment features of Windows 7
    http://aps2.toshiba-tro.de/kb0/HTD12017W0001R01.htm
    The option Processor power management contain the option called Maximum processor state
    Here you can set it to 90%-80%

  • Weird noise coming through USB using Audio Mixer on Satellite C870-1EX

    Hello!
    So, my sister has Satellite C870-1EX and she's using new Audio Mixer with intergrated sound card that sends sound through USB cable to the computer (computer recognizes it as external sound card/device). This is the device: http://alesis.com/multimix8usbfx .
    Few weeks ago she started noticing a very weird noise (listen to the file attached bellow, I'm talking about that very annoying hissing noise). Firstly, obviously, we tested every single setting on the Audio Mixer. Then, we got new USB cable and swapped it. After that we also took down the whole equipment, checked all cables, untangle them if needed, swapped power source, checked different recording software etc etc. None of that helped. Here's the catch. I used the same equipment with same settings on my computer and ... no hissing noise at all. 
    Drivers are all there as well.
    What worries me is that something is wrong with the hardware of my sister's laptop. The noise does not appear if we use microphone that uses 3,5mm jack or laptop's built-in mic.
    Windows on her laptop were reinstalled some time ago (now she's on Windows 7), but the problem appeared few weeks later.
    So, I'm hoping one of you will come up with a (simple) software sollution ... and hopefully we won't need to take her computer back to the shop. However, as far as it seems now, the latest is more likely to happen. Please, tell me I'm wrong
    Thanks!
    Attachments:
    Track 1_002.zip ‏999 KB

    That doesn't appear to be a US model, and this is the forums for Toshiba USA. You may want to contact Toshiba in your region. If it's a European model, you could check the Toshiba Europe forums.
    - Peter

  • Color Laserjet Pro M277dw making weird noises when printing

    Hello Everyone, At my office we bought the Color Laserjet Pro M277dw printer last week, and since then everytime we print, the printer makes really weird noises. We checked inside but everything inside looks to be okay . Here you have the link with an audio I recorded with the sound it makes. Thank you very much and it would be great if you guys could help us to find a solution! Best, Lorena 

    Grinding can only mean physical damage to the printer.  You need to isolate the sound and replace the part to resolve the problem. The good news is that this is a new printer and will be covered by the warranty.  Contact HP directly and have them run you through the options.  It shouldnt cost you anything, but you do need to contact them directly.

  • Weird noises and voices when I make a call

    Hello. I use Skype all the time at work. I usually make international calls and sometimes receive calls. Now and then, when I make a call, I can hear some weird, very loud noises in my headphones. It's like bits and pieces of conversations mixed with crackling and bumping sounds. Meanwhile, I can also hear the phone ringing. The noises stop when the other party picks up. The problem is they are very loud and my ears hurt every time because I keep the volume pretty high so I can hear the clients answering (the volume of the conversation automatically depends on the country I call) . What could be the problem? It happens with different headsets, different computers and different internet connections.

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • USB Mic Problems - Static/Echo/Weird Noises

    When I am using my USB Mic (Tritton AX 720) is sometimes get static echos and weird noises. Its very sporadic it randomly comes and goes, I have tried a lot of combinations nothing works the static comes when it wants and leaves when it wants. Does anyone have any solutions?
    Thanks a lot!

    I'm having the exact same issue on two different Mac Pros with three different USB based headsets. It happens consistently with every single use, after about 45 minutes or so. In fact, almost 45 minutes on the dot.

  • IBook making weird noise - think it's the fan

    Hi, I've had this iBook for just over two years now, and lately it's been making a weird noise. Every so often something inside - I think it's the fan - will start making this sort of high whining whirring sound, then quiet down after a few minutes. It's not particularly tied to anything I'm doing, and will sometimes happen when I'm not doing anything. Also, I am using the computer on a normal desk, not in any situation which could lead to overheating, and the computer doesn't feel any hotter than usual.
    I think the problem is getting more frequent over the past few months. I originally had 10.2 and I installed 10.4 when it came out, but I think the noise had already happened once before then, so I can't directly blame that. The computer has been running a little slower since I installed, though, and the trackpad has stopped working a few times lately.
    Anyone have any suggestions what could be causing this, and is it just a nuisance or is it the first sign of the computer breaking down? If it needs repairing, where do I start? I'm very ignorant about hardware, so please try to explain simply! I do have a friend who can help me if at-home repairs are all that's needed, though.

    Esther,
    Have you ever done an Archive and Install of your OS? If so, you may have a Previous System folder on your hard drive taking up a lot of space. This can safely be deleted.
    Some folks delete files regularly, but forget to empty the trash. It isn't gone (and doesn't free up space) until you empty the trash.
    You may want to download Monolingual, which will allow you to remove unnecessary languages and foreign fonts. Most people recommend keeping around 5 gigs free to allow for smooth operating in Tiger.
    Try booting into Safe Mode. This will take awhile longer than a normal startup because it does a file check and repair of the hard disk.
    You will see your normal desktop. Once completely started up, restart normally, and go to Applications/Utilities/Disk Utility and repair permissions on the hard drive, as Barry has instructed above. (After repairing my hard drive via Safe Mode, I always repair permissions, even if I have done so recently.)
    Hope you are on your way to a happier, quieter hard drive.

  • X300 - fan/hdd making weird noise

    FYI notebook is <= 6 months old.
    Couple of days ago, I had my x300 on for few days without any downtime, did system upgrade (kernel changes included [debian lenny]) in the meantime. Then out of nowhere, this very loud weird breaks out, few years ago I heard pretty much the same noise, I didn't shut down my notebook, and result was ... my hdd died. 
    So I shut down my x300, let it "relax" for few hours. Few hours later, noise is much softer and quiter, since I thought it could even be made to changes to kernel, I tried with few other distros, but nothing really changed it. Now I first thought it was my fan that was making this weird noise, but now I'm almost 100% positive it's my hdd. Since x300 would remain completely silent until I saw it booted my root partition and hdd started working, then I would hear the noise as well. 
     I keep shutting it down now, if it's not shut down it's on suspend or hibernate, I'm really scared to leave it up all night. I tried going through this forum, Google of course and etc ... but nothing really solved my problem. Right now noise is completely ... you can barely hear it, but let's say I have bat ears so I can hear it all the time. 
    It goes away, but then few minutes after computer has been on it comes back, since I gave it its time to "rest" it's been quite quiet, the reason I don't send it to Lenovo support is because of my recent incident: http://forums.lenovo.com/lnv/board/message?board.id=X_Series_Thinkpads&thread.id=6612 
    and I pretty much just got it from them, so if I really don't want to go through whole thing agian.
    Any thoughts, ideas, please do let me know.
    Message Edited by AbsintheSyringe on 01-25-2009 05:47 PM

    I recommend you try to remove the battery and boot it if the noise is still there or not.
    SDD might not have any noise from my experiences.
    You're so hard to vertiy where the noise comes from , because the material of x300 is so easily passing the sound everywhere.
    Most common problems are came from the fan, the cpu (can not be solven), the battery(common issue)
    BTW, the x300 is supposed to be loud....i own one, I have the same problem, just use tpfancontrol and kick the noise out

  • Weird noise after locking

    My phone is making this strange noise when I lock it, it starts off slowly and then speeds to a fluid buzzing, and it sounds very close to the noise a cicada makes. It is VERY loud.
    It only started doing it today, and only when I lock my phone. Turning the lock tone off also turns off the buzzing, but I'm worried that something is still wrong with my phone! I don't have very many applications, I recently updated Facebook but that's it.
    If anyone else has this problem, PLEASE let me know!

    I got my new iPhone 4 on the day of the release here in Canada (July 30, 2010). I knew about the antenna problem but I was willing to put on a bumper case to resolve that issue. Anyway, several days after I got the phone, I experienced this very loud weird noise coming out of the speaker every time I either unlocked the phone or locked the phone. Yesterday I experienced the same issue, but this time I decided to record this noise on the Voice Memos application and guess what; as soon as I pressed the record button or the stop button, that same noise was being emitted.
    The problems seem to be piling up and that could explain the shortage of phones here in Canada; perhaps they are resolving manufacture issues. I am ready to take this phone back because it seems like an unfinished product.
    <Edited by Host>

  • Weird noise when starting up Macbook Pro

    Hi there,
    When i start up my MBP, I hear a weird noise that wasn't there before. It sounds like a CD changer changing CD's. I checked and there is no CD in the CD drive. I don't know if it is an HD problem or the CD drive problem. I ran a hardware test and there were no problems found. Here is a video of the noise:
    http://www.youtube.com/watch?v=wqKbdVHzsNc
    Please give any advice you can. It is making me worried so please let me know. I will take it to the Apple store if this is an issue. But it might have always been there, I just never paid attention to it.

    seannlim wrote:
    The rep said it was normal? Apple support said it wasn't so hopefully they will swap it for a Hitachi. Hitachi drives don't make that noise right?
    I will pass that to eliaz for his input as he had a new MBP also, but from history Hitachi is quieter.
    Sound issue aside. What is really important to look out for is that all these drives are slot loading and dust will come into the drive opening very easy. Typical case is that you will loose dual layer dvd burning capability and get bad burns. Solution is to invest in a cleaning disc. If that does not work then it's an exchange of the drive that is needed.

  • IMac Mid 2007 Hard Drive Making weird noise

    My 20 Inch Aluminum iMac from mid 2007 started to make some weird noises today when I turned it on. Not the usual noises but a mix between a creeking noise and a scratching noise. I have a program called smart reporter and my hard drive is not failing, but it is making noise. It is the hard drive because I checked the fan speed, and I know what the fan sounds like when they are on very high, also it is not the microphone, or speakers, i tested them both. I do not know what to do and this is a major problem, since my warranty expired on august 31st. Please help, I am open to anything, Thanks.

    Good question.
    If the hard drive in your intel iMac was as easy to replace as the one in the G5 iMacs I would suggest buying a new drive and installing it yourself. Unfortunately it's not for the faint of heart.
    I'm not sure how much Apple or an Apple authorized service center will charge you for a new hdd and install. I would call around and ask.
    You can always just make sure your files are backed up and just wait. Who knows. It could be a couple years before it dies or tomorrow if that the problem. It's up to you.
    lenn

  • Apple Banned me, because of a very weird problem with my "Factory Unlocked"

    Hi Everybody! Im having a very weird problem with my unlocked iphone 4.
    First of all, i would like to apologize because of my english, is not very good. My native language is Spanish.
    Well.. Im from Mexico, and here we can buy the iphone Unlocked on the Apple Online Store.
    Here's my problem. Apple has exchanged my iphone 3 times.
    I returned the iphone the first time because the screen was totally yellowish, other than that everything was working great!, that was by the end of September.
    On October 20th, i recieved my second iphone, and then a bigger problem started .
    Before i continue, let me give you this information: here in Mexico we have basically 3 cell phone companies
    1.- Telcel
    2.- Movistar
    3.- Unefon
    OK, now on october 20th, i recieved my second iphone, and then procced to activate via itunes using my UNEFON sim card (microsim).
    And every time i tried to activate it, only got this message onscreen:
    http://i148.photobucket.com/albums/s2/jorgelomeli/Screenshot2010-10-29at24915PM. png
    I though something was wrong with my brand new factory unlocked iphone 4.
    I have 4 more simcards from my brothers (they all had iphone 4 too)
    I tried telcel sim card, and i could activate my iphone. Then i insterted the Movistar microsim, and it worked too!! But then when i put the Unefon sim, the itunes logo inmediatly appears on the screen asking to activate on itunes, and when i tried that, the only response i got was the image above saying " The Simcard inserted on this iphone does not appear to be supported"
    Weird thing here is, that, when i put my Unefon sim card on my brothers iphone 4, it worked great! on all of them, internet 3g, phone, wireless , evrything!
    I called apple support, and they exchange the iphone for another one.
    I recieved the third iphone on October 29. Last friday. and guess what? SAME PROBLEM! different serial number, same week production (week 42) but exactly the same message on itunes.
    Very, very frustrated, i called apple again, and after 1 hour with thechnical support, they told me " We are sorry, but we can only offer you, your money back, NO MORE EXCHANGES FOR YOU"
    I said why?... i dont want my money back! i want an UNLOCKED iphone!, but they refuse to give me another iphone.
    When i asked techincal support, why my unefon sim card worked great on all three of my brothers iphone but not on mine, he just told me, "I really dont know, i guess they just got lucky" ****, this answer put all my trust i had on apple products for years, right on the garbage.
    Since they refused to give me another iphone, i accepted my money back, and inmediatly after i finished the call, i asked my brother to buy me one more time an iphone 4 using his name, and his credit card. Now i have to wait until November 8-12 to recieve my new iphone, hoping this time i get a REAL UNLOCKED iphone, and not a partially unlocked iphone.
    btw. i even went to Unefon costumer service and bought a new prepiad line, with a new microsim, just to be 100% sure that this problem is not because of the sim. And again didnt worked on my iphone, but it worked on any of my brothers iphone4.
    Serial numbers of the 3 iphones:
    79039C0U* (this one worked great with Unefon, only problem was yellow screen)
    85042GR4*
    81042FJB*
    What do you suggest me? any info would be really aprecciated
    FYI i also restore 4 times the last iphone and nothing seemed to work, i use 3 different computers, Macbook Pro, iMac, and an Hp with Windows 7, and the same message on all three computers.
    Wierd thing also, one of my brothers bougth an iphone 4 this last week too, but he bought the 16Gb not the 32Gb. His iphone production week is 42 also! and when i put my Unefon sim in his iphone works great!
    I dont know what else i can do, I just need to have faith that my new iphone coming this november will be real unlocked, but what if i'll recieve an iphone and then the same problem?? time for android? just kidding really guys, what can i do? anyone with similar problem like me? i dont wanna use Telcel or Movistar, i wanna use Unefon, and thats why i bought an Unlocked iphone
    btw: jailbreak is not a solution for me, because i always like to use legal software on all my apple products, and because of the warranty.

    According to http://support.apple.com/kb/HT1937, there are two official carriers in Mexico (Movistar and Telcel) and neither carrier offers an unlocked phone.

  • I want to upgrade my 2007 Mac desktop to 10.5 Leopard. I am currently running on 10.4.11. I have put the leopard disk into the drive and all it does is make a weird noise and then spits the disk right back out. It doesn't do this with other disks. HELP

    I want to upgrade my 2007 Mac desktop to 10.5 Leopard. I am currently running on 10.4.11. When I put the leopard disk into the drive all it does is make a weird noise and then spits the disk right back out. It doesn't do this with any other discs, only this software. Is it still possible to update this computer?

    Yes. Try Amazon.
    Before you do upgrade to Snow Leopard, make sure your Mac meets the requirements.
    Mac OS X v10.6 Snow Leopard - Technical Specifications
    Make sure the disc you tried using doesn't have any fingerprints or smudges on it. The optical drive can't read the disk otherwise.
    If your Mac won't read the disc, might be a good idea to rule out any problems with the startup disk BEFORE trying to upgrade the system.
    Using Disk Utility to verify or repair disks
    Message was edited by: Carolyn

  • Images Problem in Firefox -- very weird -- please help!

    Hi all, I need your help here with ideas...
    I have built a site that is 100% Flex, full size.  It uses images in two different ways: Image controls and HTML text.  Both are populated dynamiccally from XML resources.
    In IE, these all work perfectly.  But I get some very weird behavior in Firefox.
    I have a list with a custom item renderer using Images.  When the user clicks on the list, a pop-up Canvas is displayed with the same image and an Text area with htmlText in-line Images. In Firefox, these images do not populate -- neither the table nor inside the text -- but the text shows perfectly, even spaced around where the image would be.
    But elsewhere in the application, I have an Image control populated the same way, except driven by a datagrid selection, and that one WORKS FINE.  I also have other Text areas using htmlText, populated the same way, and the in-line Images work great there in Firefox. 
    What is going on???

    I think I figured it out.
    The slashes in the image paths went the wrong direction. \ in stead of /
    Apparently, this is no problem for IE, but chokes Firefox.  Keep an eye out.

Maybe you are looking for

  • SNP Planned Order Date

    Hi Experts, May I ask for your help. I have a gr processing time of 1 and In-house production of 1 day as well. But whenever I run heuristic, it results in 4 days from start date to availability date. Say April 16 start date and availability date is

  • V$BGPROCESS and V$SESSION

    This is on 10g. V$BGPROCESS displays information about background processes V$SESSION has some rows representing background processes. What is the difference between two ? Am I correct in understanding that ; v$bgprocess contains total allocated proc

  • Bootcamp crashed removing partition, now stuck with 60GB "Free Space"

    I have a MacBook Pro Retina, 15-inch, Early 2013 with a 250GB hard drive running Mavericks 10.9.3 I use to have a 60GB windows partition setup via bootcamp, but I haven't used it in a while and wanted the space back. Bootcamp crashed half way through

  • Problems changing the Open with... setting

    Hi, Having recived my new MacBook Pro with the trial version of Office 2004 I removed this using the remove utility as I have the full version of Office X. However, I get the error code -10660 when I try and open documents. I have tracked this down t

  • How do I achieve this effect please?

    I would like to create text boxes on the page with curved edges like ths, how is this done please?