Very Weird Problem Zen Micro...Please Help

So I accidently dropped my zen micro really hard and now when I turn it on, it takes me to the creative copywrite beggining and then it goes to just creative with nothing else on the screen and doesn't move from there as if its frozen. I've tried rescue mode, clean disk, but it's taking over 45-60 minutes and still nothing, just scan disk. I had about 800 songs. I could care less about the songs, I just want the dam thing to work already. Any Help would be of much appreciation, pleasssee and thank you.

You're pretty much hosed. Even if its under warranty, Creative will likely view the damage as due to dropping and, therefore, not covered. I'm not sure what the repair charges will be, but it won't be cheap.

Similar Messages

  • Creative zen micro please help me

    ok heres the story. st time on my creative zen micro it said firmware problem...thanks to you guys and your help I got it fixed. now it says firmproblem again but when its says that it goes stright to recovery mode and when i connect it the firmware app does not reconize it and says please connect your player. I contacted creative but they said you neeed a recipt and if it said to KEEP RECIPT in big letter on the manual i would have kept it but that was about 9 months ago and they said they can't help. did i just waist $200 for nothing?
    this is the 3rd time i posted bout this
    NOW WHAT DO I DO? please please please help...
    ps sorry for the bad grammer and spelling

    I just received the same problem,how do I fix it's

  • Very Strange problem!! Please help me!!!!!!

    Okay, my sister has a Pink ipod Nano 2nd gen, 4gb.
    It has worked well since December 2006, but this week has begun messing up!
    Last night it froze up. The *Clicker noise* heard when scrolling through menus etc. was playing uncontrollably when not even touching the touch wheel!
    I had to reset the ipod, hate doing that by the way.
    2nd. Now, the iPod will turn on, go straight to the last song played, and won't respond, the only way to get it to stop is by resetting it!
    I NEED HELP! please help me!!!!!!

    She can just re-sync her stuff back onto it and see if it now acts normally. If you still get the funky click wheel behavior, then she may have an actual hardware problem like a sticking contact and it would either have to be repaired (probably not worth it) or replaced.
    Patrick

  • Unable to export to MPEG2-DVD! Very weird situation .. Please Help!

    Hi Folks,
    I've been using Pro for years.
    Currently using CS6 - a fresh install from the cloud as of a couple days ago.
    So, I have a project ready for DVD.
    File / Export Media .. this brings up the Export Settings.
    I choose MPEG2-DVD as the Format with Match Source Attributes as the Preset, then hit Queue.
    Normally, this would queue the export in Adobe Media Encoder as .m2v but for some unexplicable reason - this isn't occuring.
    Instead, Adobe Media Encoder drops the MPEG2-DVD format and replaces with the AAC Audio format!?
    What the?
    Am I losing the plot? Have I missed something?
    File / Export Media / Format MPEG2-DVD = .aac file (only) in Adobe Media Encoder??

    Thank you Ann.
    Turns out I had missed an update for Adobe Media Encoder in the Adobe Application Manager.
    I had installed the software yesterday and so I assumed I had the latest version. I was wrong.

  • IOS 7 very slow, i have many problem , exemple  download documents , typing doc to go .   Very slow, sometime no response , please help us for this error

    IOS 7 very slow, i have many problem , exemple  download documents , typing doc to go .   Very slow, sometime no response , please help us for this error,

    spacepilot wrote:
    i live in the WS10 / 0121 area and have been having similar problems. i have an up to 20mb services, but up to a month ago connected at 4800, then my line went dead for 6 days, and all indis could do was send me  new router, which came the day after my line was restored, but had dropped to 2418 and remained so for the past 3 to 4 weeks, then i dropped to 1963 yesterday, and 729 today.
    all speeds are far lower on my upto 20mb than they where on my upto 8mb link.
    foegot to add, i reported the problem via the report a problem link, which hopefully will be red by someone with  a firmer grasp of english that the normal call centre staff
    welcome to the forum    why don't you start your own subject and post the adsl stats from your router and also run btspeedtester and post the results and someone may be able to offer assistance
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

    Question
    I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
    '''(in English)'''

    Hi Danny,
    Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
    but not 180, right?
    I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
    =COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
    or
    =SUM(IIF(Fields!TICKET_STATUS=4,1,0))
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Apple Banned me, because of a very weird problem with my "Factory Unlocked"

    Hi Everybody! Im having a very weird problem with my unlocked iphone 4.
    First of all, i would like to apologize because of my english, is not very good. My native language is Spanish.
    Well.. Im from Mexico, and here we can buy the iphone Unlocked on the Apple Online Store.
    Here's my problem. Apple has exchanged my iphone 3 times.
    I returned the iphone the first time because the screen was totally yellowish, other than that everything was working great!, that was by the end of September.
    On October 20th, i recieved my second iphone, and then a bigger problem started .
    Before i continue, let me give you this information: here in Mexico we have basically 3 cell phone companies
    1.- Telcel
    2.- Movistar
    3.- Unefon
    OK, now on october 20th, i recieved my second iphone, and then procced to activate via itunes using my UNEFON sim card (microsim).
    And every time i tried to activate it, only got this message onscreen:
    http://i148.photobucket.com/albums/s2/jorgelomeli/Screenshot2010-10-29at24915PM. png
    I though something was wrong with my brand new factory unlocked iphone 4.
    I have 4 more simcards from my brothers (they all had iphone 4 too)
    I tried telcel sim card, and i could activate my iphone. Then i insterted the Movistar microsim, and it worked too!! But then when i put the Unefon sim, the itunes logo inmediatly appears on the screen asking to activate on itunes, and when i tried that, the only response i got was the image above saying " The Simcard inserted on this iphone does not appear to be supported"
    Weird thing here is, that, when i put my Unefon sim card on my brothers iphone 4, it worked great! on all of them, internet 3g, phone, wireless , evrything!
    I called apple support, and they exchange the iphone for another one.
    I recieved the third iphone on October 29. Last friday. and guess what? SAME PROBLEM! different serial number, same week production (week 42) but exactly the same message on itunes.
    Very, very frustrated, i called apple again, and after 1 hour with thechnical support, they told me " We are sorry, but we can only offer you, your money back, NO MORE EXCHANGES FOR YOU"
    I said why?... i dont want my money back! i want an UNLOCKED iphone!, but they refuse to give me another iphone.
    When i asked techincal support, why my unefon sim card worked great on all three of my brothers iphone but not on mine, he just told me, "I really dont know, i guess they just got lucky" ****, this answer put all my trust i had on apple products for years, right on the garbage.
    Since they refused to give me another iphone, i accepted my money back, and inmediatly after i finished the call, i asked my brother to buy me one more time an iphone 4 using his name, and his credit card. Now i have to wait until November 8-12 to recieve my new iphone, hoping this time i get a REAL UNLOCKED iphone, and not a partially unlocked iphone.
    btw. i even went to Unefon costumer service and bought a new prepiad line, with a new microsim, just to be 100% sure that this problem is not because of the sim. And again didnt worked on my iphone, but it worked on any of my brothers iphone4.
    Serial numbers of the 3 iphones:
    79039C0U* (this one worked great with Unefon, only problem was yellow screen)
    85042GR4*
    81042FJB*
    What do you suggest me? any info would be really aprecciated
    FYI i also restore 4 times the last iphone and nothing seemed to work, i use 3 different computers, Macbook Pro, iMac, and an Hp with Windows 7, and the same message on all three computers.
    Wierd thing also, one of my brothers bougth an iphone 4 this last week too, but he bought the 16Gb not the 32Gb. His iphone production week is 42 also! and when i put my Unefon sim in his iphone works great!
    I dont know what else i can do, I just need to have faith that my new iphone coming this november will be real unlocked, but what if i'll recieve an iphone and then the same problem?? time for android? just kidding really guys, what can i do? anyone with similar problem like me? i dont wanna use Telcel or Movistar, i wanna use Unefon, and thats why i bought an Unlocked iphone
    btw: jailbreak is not a solution for me, because i always like to use legal software on all my apple products, and because of the warranty.

    According to http://support.apple.com/kb/HT1937, there are two official carriers in Mexico (Movistar and Telcel) and neither carrier offers an unlocked phone.

  • I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!

    I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!

    Hi there Rlong50,
    You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    -Griff W.

  • I upgraded my iPad 2 (3G) to the new OS8 and I can no longer connect to 3G.  All the settings on the iPad are correct.  It just shows that it's searching for a signal.  I'm in an area where my signal (pre OS8) was very good in strength.  Please help!

    I upgraded my iPad 2 (3G) to the new OS8 and I can no longer connect to 3G.  All the settings on the iPad are correct.  It just shows that it's searching for a signal.  I'm in an area where my signal (pre OS8) was very good in strength.  Please help!

    Hello Jpahlphoto!
    I'm sorry to learn about the issues mentioned in your post. Let's fix this for you OK?
    Please restore your iPad and see if that does the trick. You'll find the steps here:
    http://bit.ly/16hQAlr
    Thanks,
    ChristinaB_VZW
    Follow us on Twitter @VZWSupport

  • HT201263 my ipad give me the apple sign without running up it appears all the time in the screen , i tries to reset my ipad , but still in this problem , can you please help me?

    my ipad give me the apple sign without running up it appears all the time in the screen , i tries to reset my ipad , but still in this problem , can you please help me?

    You may want to look at this about using recovery mode to restore your iPad.
    http://support.apple.com/kb/ht4097

  • HT201209 I'm new to this an yesterday I bought 65$ worth of iTunes music using a iTunes gift card. Then I got these emails saying I am being billed again????? What do I do???? I'm very frustrated with this. Please help me

    yesterday I bought 65$ worth of iTunes music using a iTunes gift card. Then I got these emails saying I am being billed again????? What do I do???? I'm very frustrated with this. Please help me

    What e-mail are you talking about?
    What exactly did it say?
    Are you sure that the e-mail was not your receipt?

  • It won't let me drag an effect from the browser all of a sudden. I have always been able to do before. I am using effects from favorites bin and when I try to drag it, it won't move. I have never had this problem before. Please help.

    It won't let me drag an effect from the browser all of a sudden. I have always been able to do before. I am using effects from favorites bin and when I try to drag it to the timeline, it won't move. I have never had this problem before. Please help.
    P.S. I have tried other effects including transitions and it still won't let me drag.

    Wow that was really quick, thank you so much.  Im not sure at all which version it was because i said it was around 4 years ago he bought it.  I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names.  isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
    So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
    either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
    sarucia

  • Mac Book Air sleeps when moved...i don't know whats the problem...please help me out if anyone knows about this...

    Mac Book Air sleeps when moved...i don't know whats the problem...please help me out if anyone knows about this...

    your reed switch for the monitor is defective, it thinks youve shut the lid when you havent
    mechanical fault , contact Apple for service and parts replacement.

  • I want to ask how to downgrade ios 7 to 6.1.3, because a lot of problems ios 7. please help

    I want to ask how to downgrade ios 6.1.3 to 7, because a lot of problems ios 7. please help

    I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.

  • When I instaled new verson my Iphone4 stoped, in the sight shows the Itunes symbol. I tried to connect to Itunes, but can't repair. MISTAKE 3004. What can I do? I'm brasilian and don't speak english very well... Please, help me. Use my e-mail. Junara

    When I instaled new verson my Iphone4 stoped, in the sight shows the Itunes symbol. I tried to connect to Itunes, but can't repair. MISTAKE 3004. What can I do? I'm brasilian and don't speak english very well... Please, help me. Use my e-mail. Junara
    <Personal Information Edited by Host>

    Hello Junara1969,
    Thank you for contacting Apple Support Communirties. I have a couple of articles for you to take a look at to troubleshoot your issue.
    I would start with basic troubleshooting
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/TS1275
    If you are still having the same issue, then there are further steps for this specific error code here:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/TS3694
    Regards,
    Jeff D.

Maybe you are looking for

  • How to stop the impending installation of 8.0.1 upon FF restart?

    I clicked on the install link for FF 8.0.1 on the Mozilla website. I thought it would download an executable file that I could use when I was ready. Instead it started the install process, and is now waiting for me to restart FF to complete the insta

  • Vendor in selection screen of MB5B

    Business requirement is - In transaction MB5B (Stock on posting date), when users select Special stock option, Vendor should be available in selection screen. Purpose is to know Vendor consignment stocks on posting date. Does any one have any clue ab

  • Premiere Pro CS5.5 Upgrade is Downloaded and Installed, but 5.0 Isn't Updating

    Hi there. I may be missing something very simple here, but here goes: I already have Premiere Pro CS5 on my system, and I just purchased, downloaded and installed the 5.5 upgrade a little while ago, but CS5 isn't upgrading. It's still opening as Vers

  • How to remove go button for prompt

    Hi everyone, I got a requirement from client asking to remove 'GO' button for prompts which has single value to select and have go button for those which need multiple select values. If prompt has one select value the report has to change based the s

  • External storage access

    I have a Macbook Pro and i also have an external hard drive at home. I'm trying to figure out how i can access my files on the hard drive from the road. The hard drive is wired into a router and the only computer hard wired into the router is my moth