Veryfying if E-mail Noti.sent to user after provisioning a req. in CUP

Hi,
Is there any way from where i can see the e-mail log of a particlar CUP request which has got provisioned in the system.
I checked that e-mail address of requestor and user is properly mentioned in the request form,stage is also configued as required,e-mail reminder is also ok, but some users are still saying that they didn't recieved any e-mail notification of username and password.They say nothing is in junk folder too.I just want to check excatly what is happening.
Thanks,
Mukesh

Thanks Satish for telling me the table..
the points you mentioned, i have already check..
Users & Requests following to other workflows are getting provisioned and getting the Password Provisioningmails.
In troubled workflow also others mails for e.g. submission,waiting approval,approved are going but only Password Provisioning are not getting recieved.
I also checked from the above table, and found except Password Provisioning mail all other notifications entry are present.
Any idea.i am working on SP12
Rgds,
Mukesh

Similar Messages

SUS - MM Scenario: notification mail not sent to all Supplier Users

Hi,
we're in a SUS-MM scenario and we publish Purchasing documents (PO and/or SAR) to SUS portal.
The notification mail for new published documents are sent only to the e-mail address of the Supplier (imported from SAP to SUS) which is in the SAP Supplier Master data. But if the Admin supplier creates other users for the supplier (F1 / F2 / F3), the notification mail for new published PO/SAR are not sent to the mail address of F1 / F2 / F3 users. Is it the standard behavior or is there some missing customizing setting missing?
Our customer wants that notification mail are sent to all the mail addresses of the Supplier Users.
Has someone had this kind of requirement? and, if it is not achievable via standard customizing, which could be the right solution to meet this requirement?
Thanks in advance

Hi,
This is a standard SAP process which SAP has provided,
The other way is to develop a custom program,
1) Select the Supplier.
2) Check the available contact persons of the Supplier.
3) When a document is created in ECC (Hope you are in MM-SUS), select the list of contact persons for Supplier. (I assume need a RFC FM to develop to SUS)
4) Send a e-mail to all users linked with this Supplier.
You can find the linked Contact persons in BP transaction and Table BUT000.
Please change the Status of the Issue once your problem solved, other will get benefitted. If possible post the soulution.
Thank you,
Anil

APEX_MAIL - e-mail not sent anymore

Hi,
I created an evaluation application on apex.oracle.com. I created a page based on a procedure where a user can fill in e-mail addresses. The procedure should then send an e-mail to each e-mail address. This has worked for some time. I use APEX_MAIL.SEND to send the e-mails, and i can see them in the APEX_MAIL_QUEUE table. So far so good. But then even if i run APEX_MAIL.PUSH_QUEUE the e-mails are not sent. There are no errors in the MAIL_SEND_ERROR column.
In the APEX_MAIL_LOG table I can see 10 e-mails, 8 of them were sent successfully (the 2 others had syntax issues in MAIL_TO, I was experimenting how strict "comma separated" was meant :-) )
But the past 2 days I haven't been able to get any mail out. It just stacks in the queue table. I ran push_queue, without effect, and then deleted all rows in the queue to be sure the first row in the table contained a valid e-mail with existing and different mail_to and mail_from. But it has no use...
I searched the forum but none of the existing posts solved this. Since I use apex.oracle.com I have no access to a lot of the settings, but as I said I have been able to get 10 mails out, so I suppose settings for SMTP server etc. are correct.
Can anyone help me? Thanks,
Jan

I (Oracle) use(s) the latest version of apex I suppose? It's version 2.2.1.00.04
I can't test the mailserver using PHP, as I don't know it's name/address, it's maintained by Oracle.
My web application uses an evaluation workspace provided by Oracle, I don't have any control over "external" settings and configuration like the mail server. It is strange however that the first 10 e-mails got through (moved from APEX_MAIL_QUEUE to APEX_MAIL_LOG).
Anyone knows about a limitation of the number of e-mails allowed by Oracle? Or anyone else uses one of these evaluation workspaces and is (un)able to send e-mail? I can't get ant mail out since november 30th.
Thanks

Outgoing mail not sent

In my email account, i am unable to send out emails. When I click the "send" icon, a box appears. It says to Enter Password for Acccount
"mail.gmx.com:[email protected]", enter Password for user, with a box to type password in. I type in Password, click "OK". Then this same box appears with a blank line for my Password to be typed in again. This keeps happening again and again, and my outgoing email apparently is not sent out. I hope you can help with this vexxing problem.

Good morning Nadia :-)
You believe? Go on Preferences (Mail) > Accounts > Account information and check, whether there is the right server for the Outgoing Mail server (as I said, there must be "mail.gmx.de")
If not, you should go to "edit SMTP Server list ..." and
Account information:
Description: smtp gmx server (or you fill in nothing)
Server Name: mail.gmx.de
Advanced:
radio button checked: Use defaults ...
Authenitfication: password
User Name: the same as in Incoming Mail Server
Password: the same as in Incoming Mail Server
Hope this helps! Have a nice weekend
marek

Mail not sent from iphone mail app

I tried to send a mail through the mail app through my gmail account. Was shocked that the mail was not sent nor I can find it in any of "sent" or "draft" boxes. And the very disappointing thing about this problem is that there was no errors, and I just knew about 12 hours later from the expected recipient that he did not receive my mail.
#SHOCKING
I hate iOS 7, thus I mat start to hate iPhone and Apple.

Has the Mobile Me account been set up on your iPhone as POP rather than IMAP? If it has been set up as POP then any message sent will not be mirrored. Your Mobile Me account should also be configured as IMAP on all your devices in order to see those messages in your Sent Items folder.
The idea of IMAP is to be device independent such that whatever you do is mirrored on all your devices as they each synchronize with Mobile Me. I suppose you could view the Mobile Me "cloud" as being the main repository. If you delete a message from your Inbox via your iPhone, the next time you connect your Mac that message will not appear in the associated Inbox in Mail.
Does that make sense?
Chris

How to see mail NOT SENT?

i am trying to troubleshoot an issue where i am not sure if mail i write on the phone is getting sent out.
is there a way to check for email that was written on the phone but not sent?
also, is there a way to change a setting so that i get a confirmation that mail sent in the future goes out? i have seven or eight accounts so it would be ideal if this was one setting or one method as opposed to something i have to set in each account.
TIA

If an email cannot be successfully sent, it will remain in the Outbox mailbox which won't be available unless there is an email that was not successfully sent for whatever reason.
A successfully sent email will be in the account's Sent mailbox that sent the email - an email will not be in the account's Sent mailbox unless it was successfully sent.

Mail not working at all after 10.9.3 update

Does anyone have a fix for this issue? I have tried reinstalling Mavericks as a whole
and Mail still isn't working. I've also tried zapping the pram and repairing disk
permissions with no luck. I can use webmail but I really need to access my
desktop Mail. When I open the program is it is grayed out across the top of
the screen and no windows come up at all. If I click any of the menus they turn
black and I can see into all of the drop down menus but a lot of the items are
grayed out like "new viewer window". If I want to quit Mail, I have to force quit it.

Before we move you to the new User, let's try nuking files used by Mail and see if we can get Mail working in your User.
System Preferences > Internet Accounts > Delete all accounts.
Go to your User's Library folder. (if you don't know how to find, see this link.)
Rename Mail to MailXX
Go to Containers in the User's Library folder. Delete the com.apple.mail folder.
Go to Preferences in the User's Library folder. If you find any com.apple.mail.plist files, delete these.
Log out under the Apple in the Menu bar
Log in
Open Mail. Add one account at a time and make sure it is working before adding additonal acounts.
If you have POP account you can import the "On My Mac" folders from the MailXX folder.
If this fails, we'll move you into the new User.

Exchange 2007 is keep freezing with the mail received not sent to users

I got this problem from time to time in past, but now it is happening more times a day.
When Exchange freezes, I go to services of the Windows server 2008 were it is installed and restart all the Exchange related services even if they are all shown as running. By restarting the services, I can unlock the situation, but I can not say which service
is giving this problem
Please let me know
thnaks
Regards
Diego Bernardi
Stalam S.p.A.

Hello,
Firstly considering checking the Transport Service. Also check the application log and see if there are any related error IDs.
Thanks,
Simon Wu
TechNet Community Support

Sent mail not sent; .Mac mail not receiving

Having a real problem on several computers. First of all, my ISP assures me that they have not blocked any ports or changed anything about their network recently. And I too have changed nothing recently.
I am not able to send e-mail it seems from my .Mac account, although the messages appear in my Sent folder and I do not receive any error messages. I am not able to send messages to myself to confirm working order. It also doesn't work if I am working thru the web based .Mac e-mail. I have another e-mail address running thru Mail as well and it seems to send and receive e-mail just fine. Although using it to send my .Mac address a message does not work. I have tried to send my .Mac address an e-mail from another .Mac address that my wife uses to no avail either. Similarly my other non-.Mac e-mail address does not receive e-mail from her .Mac address either.
Its puzzling. When I take my wife's MacBook to a local free wifi hotspot all e-mails seem to work fine.

You need to determine if the issue is system wide or isolated to your user account on the computer.
Create a new user account by going to System Preferences>Accounts
Click on the lock in the lower left corner. Enter your admin password.
Click on the + sign and create a new user.
Go to the apple menu and choose the bottom menu choice to log out.
Log into the newly created user account.
Go to System Preferences and choose .Mac
Enter your user name and password in the fields.
Close System Preferences.
Launch Mail and it should be set up automatically and download your mail from the server.
Test whether you can send and receive.
If it does not work. You have a system wide issue.
Your best bet in that case is a reinstall. You need to make sure you don't have other issues.
Run disk utility from the Utilities folder, choose your hard drive, Verify disk.
If Verify disk fails let me know.
If Verify disk passes then repair disk permissions and you are ready to reinstall.
Do an archive and install preserving user and network settings then do a Software Update.

Mail not sent to External email address -SOST looks OK

Hi,
We've sent a report output to external email address.
When I checked in SOST it shows as sent.But the user did not receive it.
Could please advice what could be the cause of it.
Thanks,
Venkat

Check with your Basis admin - there could be many possible causes, including problems with the mail server on either side. Also try sending to another email - sometimes spam-filtering software filters are too strict on the receiving end.
This has nothing to do with ABAP IMHO.

Mail not sent as an attachment

Hi,
I create a Service Process and then a Complaint for it by copying a material.
Next I click a Return Request, Subsequent Delivery and then Credit Memo. After this a mail will be sent to the Email address of Sold to Party.
The Email is generated using a Smartform. The output of Smartform should arrive as a PDF attachment in mail but it is not coming as an attachment.
It is coming as a simple mail. is there any setting to be made for this.
Thanks,
Prasanna

Hi Prasanna,
you can change this in transaction 'scot' (double click on SMTP --> Button 'Set').
Regards
Thomas

PO workflow mail not sent to SAP Inbox

Hi All,
I have created a standard PO workflow WS20000075 , Task TS20000166 and in SPRO i have maintained Object type as "US"(user) and agent is maintained.No agent determination rule is maintained for the task.
When i create and Save PO, system is not triggering workflow to my SAP Inbox.
When i test the workflow using SWDD by giving PO number and release code, i am getting mail to my SAP Inbox
What setting i am missing to trigger the workflow to my SAP Inbox as soon as i save my PO.

Hi,
I have verified the setting is SWDD -Basic data, event linkage and binding exists
The event to workflow container details are given below
&_EVT_OBJECT&                             &PURCHASE ORDER&
&RELEASECODE&                            &RELEASECODE&
&_EVT_CREATOR&                          &_WF_INITIATOR&
Please let me know what setup is missing to trigger the workflow automatically

Outgoing mail not sent BUT appears in "SENT" folder

G'day all!
Just tried to send some PDF's about 225k in size and also a copy past version of the same doc via Mail app. ALL attempts appear to get sent and they DO appear in the SENT folder but they do not get to the recipient. All other attempts to send stuff goes but not but NOT this particular item. I have sent them to myself at various addresses incl. iCloud and my normal ISP's in box for my account. All were sent via iCloud outgoing but none arrived – only the "test" emails (to make sure it wasn't me) arrived All pdf's were made on an iPad. Any clues? very strange indeed! cheers, Sam

No, no, no!!! Absolutely NO apologies nessecary!!! YOU are trying to help ME! <g> Let me start from the top.....I read an online article in a mag called the New Yorker. I wanted to send the article to several friends and NOT simply the link. I copy/pasted the article from "Reader" in Safari into Pages as a new doc. I "open in another app" from Pages as a PDF and tried to send it direct from Pages as described before AND "open in iBook" and tried to send it. It made the motions of going but the people did not get it. I tried to paste the body text into a normal email and agin no such luck. Every time it registers in the "sent" folder but does NOT arrive. I repeated all the above as me the recipiant and no luck. I tried other pdf's from both app (Pages & iBooks) to me – no probs. Everytime anything is sent it appears in the "sent" folder but only THIS document/bunch of words, no go???? Curious huh?
cheers,
sam
P.S. I have done a work around and sent the link but I though that someone might have an idea here......

Class cl_bcs there's a way to set sender by dummy e-mail not by sap user ?

Someone know if there's any possibilty to do this ?

Hi,
you can change the sender from SAP user to some other external mail id.......but that mail id must be a valid one.........
check the below code
DATA: send_request       TYPE REF TO cl_bcs,
      text               TYPE bcsy_text,
      document           TYPE REF TO cl_document_bcs,
      sender             TYPE REF TO cl_cam_address_bcs,
      recipient          TYPE REF TO cl_cam_address_bcs,
      bcs_exception      TYPE REF TO cx_bcs,
      sent_to_all        TYPE os_boolean.
TRY.
    send_request = cl_bcs=>create_persistent( ).
    APPEND 'Hi test' TO text.
    document = cl_document_bcs=>create_document(
                                          i_type    = 'RAW'
                                          i_text    = text
                                          i_length = '7'
                                          i_subject = 'test' ).
    send_request->set_document( document ).
    sender    = cl_cam_address_bcs=>create_internet_address(
                                      'test at abcd.com' ).
    recipient = cl_cam_address_bcs=>create_internet_address(
                                      'test at abcd.com' ).
    send_request->set_sender( sender ).
    send_request->add_recipient(
                       EXPORTING
                          i_recipient = recipient
                          i_express   = 'X' ).
    send_request->send(
                    EXPORTING
                       i_with_error_screen = 'X'
                    RECEIVING
                       result              = sent_to_all ).
    COMMIT WORK.
CATCH cx_bcs INTO bcs_exception.
    EXIT.
ENDTRY.
i hav replaced @ with 'at'
Cheers,
jose.

Mail not sent using SO_NEW_DOCUMENT_SEND_API1

Hi,
I am using report RSCONN01 after the FM SO_NEW_DOCUMENT_SEND_API1 to send email.
Eg:
submit rsconn01 with mode = 'INT'
                with output = 'X'
                and return.
But this report gives a popup which is creating a problem.
Is there any way to suppress this popup or any other report to send emails.
Thanks.
Edited by: Thomas on Feb 24, 2009 10:04 AM
Edited by: Thomas on Feb 24, 2009 10:06 AM

Hi,
i do it like this and don't get an popup.
SUBMIT RSCONN01 WITH MODE   = 'INT'
                  WITH OUTPUT = ' '
                  AND RETURN.
Regards, Dieter

Veryfying if E-mail Noti.sent to user after provisioning a req. in CUP

Similar Messages

Maybe you are looking for