Verzon Blocking Outgoing Email Server

Have read on other posts regarding something like this. Its not the port as I have chanced between 25 and 587. There is no set up issue and no I do not need to reinstall Windows.
I have three ISPs due to frequent travel. In the US I am able to send and reveive email from my Verizon account using Outlook without problems. Can even do this using a Verizon compeitor's servie to access the Internet.
When abroad, incoming email using Verizon is OK. Outgoing is blocked. This is consistent.
Can Verizon comment on this? Either admit it and I will find an alternative or provide a solution. A "whitelist" inquiry was made but unanswered. I read on another post where Verizon danced around a FIOS cussomers exact same complain.
You have 2 business days or I'm filing an FCC complaint and encouraging everyone with the same problem to do so. It's not so much the blocking but hte failure to provide a workaround for legitimate use, failure to answer, and inclination to be indifferent while taking money form customers.

If I understand your complaint correctly, you are unable to use Verizon's outgoing server (outgoing.verizon.net) on networks outside of the US.
What error are you getting?
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Similar Messages

  • Inpect and block outgoing emails.

    Hello, I am new in Exchange Server Development. My task is to create TransportAgent that can inspect and sometimes block outgoing emails. It is important for me to inspect and block internal emails too(not only emails going out of organization). I need to
    support Exchange 2010, 2013.
    Thanks in advance,
    Vitaly

    As others have mentioned probably what you want can be done via Transport Rules.
    However if you have some form of content that can't be caught with Rules and you want to use a Transport Agent then.
    >> It is important for me to inspect and block internal emails too(not only emails going out of organization). I need to support Exchange 2010, 2013.
      Then using a routing agent
    http://msdn.microsoft.com/en-us/library/office/aa563310(v=exchg.150).aspx (the OnSubmittedMessage is probably the most appropriate) and
    http://msdn.microsoft.com/en-us/library/office/aa579261(v=exchg.150).aspx#Namespaces is the way to go as this will catch both Internal and External email. If you want to write one agent that will work on both 2010 and 2013 then you want compile with the
    2010 binaries and then use the
    http://technet.microsoft.com/en-us/library/jj591524(v=exchg.150).aspx on 2013 (or just compile a different version for 2010 and 2013).
    Cheers
    Glen

  • TS3276 I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?

    I cannot connect to my outgoing email server on my macBook pro, yet I can, for the same email account on my iPad. Also I can send emails from the other email account I have on my MacBook...really confused can anyone help?

    Sometimes deleting the account and then re-creating it can solve this issue
    Write down all the information in accounts before doing this
    Highlight the account on the left and click the minus button
    Then click the plus button to add the new account and follow the prompts

  • How to establish connection with the outgoing email server?

    Cannot set up Lightroom 5 email capability with Google Mail. Have confirmed proper smpt address, email and password and error message still comes up:
    "eFailed to establish connection with the outgoing email server. Please make sure you have entered the email account and password correctly."
    How can I clear this up. Help, Adobe!

    Have you checked your Gmail in-box? See if this helps:
    https://forums.adobe.com/thread/1642613

  • Verizon yahoo outgoing email server down?

    two days now, can't send email.  exact message from outlook is: 
    Task - Sending' reported error (0x80042109) : 'Outlook cannot connect to your outgoing (SMTP) e-mail server. If you continue to receive this message, contact your server administrator or Internet service provider (ISP).'
    have had the same DSL for 9 years..
    occurs on outlook 2010 under win7 x64 ultimate, outlook 2007 under vista x64 ultimate, outlook 2007 under vista premium, and outlook 2003 under XP64, (all different computers).
    outgoing server name has not changed on my end 'outgoing.yahoo.verizon.net'.
    is the outgoing email server down?
    ping shows timeout  to 98.139.211.191  smtp.vzn.mail.fy4.b.yahoo.com  (25% loss of packets)
    Solved!
    Go to Solution.

    Change port to 587 and give it a shot..

  • Outgoing email server for OS10.8.5

    I need proper outgoing email server.

    That will depend on your email provider.
    The provider has to tell you the outgoing emailserver address.

  • What is AT&Ts outgoing Email server address?

    Hi all,
    What is AT&Ts outgoing Email server address?
    thanx,
    SvK

    Steven,
    Try this link to see if it helps you out:
    http://docs.info.apple.com/article.html?artnum=306074

  • ISP Particular About Outgoing Email Server

    My ISP is one of those who insist you use their outgoing email servers. It's a CYA issue in which they seek to keep SPAM from being sent with their domain on it. However, the password I use to log in to my account on their web site get's rejected whenever I try logging in to their outgoing email server. Does anybody know what's going on?

    Hi,
    However, the password I use to log in to my account on their web site get's rejected whenever I try logging in to their outgoing email server
    Not quite clear what you mean by that... is this WebMail?

  • Block outgoing email because of VPN server

    We have Cisco VPN on ASA for over 4 years. Recently, barracudacentral.org blocks our outgoing email because of these reasons: •Your email server contains a virus and has been sending out spam. •Your email server may be misconfigured. •Your PC may be infected with a virus or botnet software program. •Someone in your organization may have a PC infected with a virus or botnet program. •You may be utilizing a dynamic IP address which was previously utilized by a known spammer. •Your marketing department may be sending out bulk emails that do not comply with the CAN-SPAM Act. •You may have an insecure wireless network which is allowing unknown users to use your network to send spam. •In some rare cases, your recipient's Barracuda Spam Firewall may be misconfigured. This is the undeliverable message: barracudacentral.org rejected your message to the following e-mail addresses and  gave this error: Service unavailable; Client host [VPN IP address-illinois.hfc.comcastbusiness.net] blocked using Barracuda Reputation; http://bbl.barracudacentral.com/q.cgi?ip=VPN IP Address The IP address they blocks is our VPN server. Why?                   

    gmail issue
    Your post is the 4th one already this morning.
    This is a gmail issue, contact them.

  • Airport blocking outgoing emails?

    Hi, I have a new airport extreme and it seems that it is causing problems with outgoing email, I can recieve emails but can't send, when I try it says my smtp settings are wrong. My smtp settings are definitley right, is there a firewall interfering?. Any ideas how to fix this?
    Thanks
    Howie

    Did you change any of the ports on the AirPort Extreme, particularly port 25? Can you open up a terminal window and telnet to port 25 on your smtp server? If you don't know how to telnet to port 25 on your server, then let's suppose your smtp server's name is smtp.some.com, so you would type
    telnet smtp.some.com 25
    If that works when your Mac is directly connected to your network (no wi-fi), but fails when it is using wi-fi, there is indeed a problem. If it fails when directly connected, call your ISP to ask for assistance.

  • Blocked outgoing email in Exchange

    We are running SBS 2003 with Exchange Server 2003. The purpose of this question is more of an understanding how email works with exchange server. The problem started about two weeks ago when we switched ISP to Comcast. At that moment email was being blocked
    by Hotmail and Gmail. We would get the following message back.
    There was a SMTP communication problem with the recipient's email server. Please contact your system administrator.
    <nhnr.org #5.5.0 smtp;550 OU-002 (COL004-MC4F51) Unfortunately, messages from 73.189.0.xxx weren't sent. Please contact your Internet service provider since part of their network is on our block list. You can also refer your provider to <a href="http://mail.live.com/mail/troubleshooting.aspx#errors.>"
    target="_blank">http://mail.live.com/mail/troubleshooting.aspx#errors.>
    MXTOOLBOX says that the public ip address comes on one blacklist - Spamhaus ZEN.
    Here is the question. If I send mail through exchange to a hotmail account it will be bounced back and undeliverable with the above message. If I configure a POP account and send an email to hotmail it will successfully go through. Why does the POP work and
    not the Exchange?
    Thanks
    Chris

    Thanks for the reply.
    Are you configuring the Exchange server as your SMTP server for your POP3 client?
    That is correct.
    I'll also ask the following, to see if we can fix your Exchange delivery issue:
    Do you have an SPF record in DNS?
    Yes we do have an SPF record setup in DNS zone file.
    Have you configured your system to send through the COMCAST SMTP systems, or are you sending direct using DNS? If so, is the IP address of this system included in the SPF record you have in DNS?
    The mail is setup to be sent through DNS.  Are you talking about the public IP address or the IP address of the server?  Either way neither of those IP address are in the SPF record. 
    If not, is your own IP address included in your SPF record in DNS?
    The mail is hosted by Bluehost and their IP address is in the SPF record.
    Have you contacts SpamHaus to determine why your IP address is on their blocklist?
    No I have not contacted SpamHaus yet.  I initially thought that is was Comcast problem but then they said it was not.  Anyway after trying different things I setup an email account (not using exchange) and was able to send email to the
    previously blocked addresses.  So I thought it might be some config problem.

  • Settings for incoming and outgoing Email server. Like incoming IMAP server or outgoing I'm at server

    How can I fix my settings in my end up incoming and outgoing email accountS For Yahoo so that I can send and receive emails.  Mite I add that my facebook is linked to my Yahoo account so that's my primary email account I have no trouble with my gmail accouts! Help please! And thank you in advan
    ce! Crazyboo.'

        I know email is an important form of communication and I would love to help!  Please try incoming server settings: mail.comcast.net , port: 110, security: none and outgoing server settings:
    smtp.comcast.net , port: 25, security: none.  If you are still unsuccessful please contact Comcast as suggested by Ann154.  Thank you!  ^TB

  • Palm Pre Plus outgoing email server for Time Warner (Road Runner)

    I have set up my email using POP server with Road Runner (Time Warner).  I am receiving emails but can't send.  Today I called Verizon & Road Runner several times.  Each one points to the other. Can someone help me with the outgoing info??
    Thanks!!

    Hi.  I understand you need help setting up your outgoing mail server and I will be happy to assist you from here.
    First,
    Verify the ougoing server settings:  (Road Runner)
    Outgoing mail server
    Username
    Password
    Port number
    Second
    Verify the Use Authentication setting.
    On
    Off
    Third
    Verify the Encryption type:
    None
    SSL
    TLS
    Please let me know if this works for you.
    Thanks!

  • Please Incoming and outgoing email server config setup in mobile

    MAIL BOX: Incoming and outgoing ORACLE email server ,port value please

    how to templates message from oracle account.please provide me the link.I don't have permission to access oracle collabaration Archived forum
    Error: you do not have permission to view the requested forum or category. please explain me how i should get in to oracle mail servers?
    MOHAMED MOHIDEEN AHAMED SAHIB
    Edited by: user12964269 on Nov 9, 2012 4:32 PM
    Edited by: user12964269 on Nov 9, 2012 4:34 PM
    Edited by: user12964269 on Nov 9, 2012 4:35 PM
    Edited by: user12964269 on Nov 9, 2012 4:37 PM
    Edited by: user12964269 on Nov 9, 2012 4:39 PM
    Edited by: user12964269 on Nov 9, 2012 4:41 PM
    Edited by: user12964269 on Nov 9, 2012 4:42 PM

  • Lumia 800 outgoing email server settings

    Hello,
    I need to set my outgoing work email (SMTP) server port number to 587 and connection security to TLS. However, I can't see an option to set either the port number nor the security to TLS. SSL security can be turned on/off, but no mention of TLS.
    I have read elsewhere that setting the server name as <server name> : <port number> can be used (that is, using a colon to separate the server name from the port number), but still this does not allow for selecting TLS security.
    My incoming email, IMAP, works fine, so my connection/username/password etc. should all be fine.
    Any suggestions would be appreciated.

    Don't know if this is actually the case but according to Google. They use port 587 on their SMTP for TLS connections and port 465 for SSL. I created the following using port 587 and was able to send an email.....
    Advanced Email Configuration (relevant info only)
    Outgoing (SMTP) email server: smtp.gmail.com:587
    outgoing server requires authentication: (Checked On)
    Require SSL for outgoing email: (Checked On)

Maybe you are looking for

  • Media file error message trying to play files from WDMycloud on ipad

    I am using a WDMyCloud networked hard drive to provide cloud backup for my Windows PCs. This backup includes my Itunes music library Using the WDMyCloud app on my iPad(or iPhone) I can see the library is succesfully backed up onto WDMy Cloud and can

  • Campaign element approval

    in our organization when ever the parent campaign is approved the campaign elements are also approved the campaign elements can also be approved manually Is there any field in the database to determine how the campaign element is approved? where appr

  • Camera RAW Crashing CS5 when opening MarkII Raw file

    Hoping someone can help me figure out why 1 out of 5 times I open a 5dMarkII RAW File(s) CS5 crashes?  Running a MAC Pro Tower, 2.8ghz Quad-Core intel xeon, 7 gb 1066 mhz ddr3, OSx10.6.7, CS5 v12 x64.  I have 4 internal drives installed:  1tb system

  • WAD-Analysis Item-Poor performance for new lines

    Hi. I use WAD7 for entering new records in IP. According to our business requirements, in analysis item properties I have defined "Number of New Lines in Planning Queries" = 50. After that I face before extremely poor performance - it takes about 1-2

  • Moving a photo element

    Every time I try to move a section of a photo with the Rectangular Marquee Tool, I get an error message saying "Less than 50% of the pixels have been selected and they edges of the sections cannot be seen.  What am I doing wrong?