VETS100A - Error - "Call contained error(s):ADS(2)

Hi,
When I executed the standard VETS report using VETS 100A form, I got the error "Call contained error: ADS(2)
Message No. FPRUNX003
When I executed it with VETS 100 form, it didn't display the job codes 00 and 01
Any help is much appreciated
Thanks

Hi,
Please check the OSS note 1372977.

Similar Messages

Call contained error(s): ADS (2)

Hi,
I have created a print form using transaction code SFP. while testing system giving me an error My form and interface showing active and no errors

Call contained error(s): ADS (2)

How to avoid this.
Sa_R

Hello,
are you sure that you have configured ADS on your J2EE engine?
Thank you for the information.
Best regards,
Dezso

SHR1 - Call contained Errors

Hi,
I am getting error for SHR1 Transaction.
in SHR1 Transaction when i give Resource, and go for Generate Shift report i am getting this error.
Error Message is FPRUNX003 and call contained errors:ADS(2).
Can any one explain.
Thanks
Nag
Edited by: nag1975 on May 18, 2010 7:38 AM

Dear Nag,
transaction SHR1 need ADS as precondition. As SHR1 display the result in PDF the installation of ADS is necessary. If ADS is not implemented or not correctly implemented you get error "Error Message is FPRUNX003 and call contained errors:ADS(2)."
So please make sure adobe document services setup (ADS) is correct.
Regards
Sabine

Error - Device type unsuitable for ADS documents

Hi,
I have created a print form using transaction SFP and i am doing test from transaction SFP
(Test function module )
/1BCDWB/DOCPARAMS
YCTC 0000000000
YCTCUSAGE 0000000000
Once i press f8 system asking for printer, then i have given printer name as LOCL and select print preview. then system giving error as
Cannot find PDL type for output device locl and Device type unsuitable for ADS documents
Can i anybody give info what i am doing wrong.
I have tested with FP_TEST_03 that also giving the same error
a®

Hi,
I have tried with LP01 and with some other printers in the network its giving error that "Call contained error (02)"
I tried with all FP_TEST*
but no results
a®

Contains errors and distribution lock

Hi all,
We have a error as "contains error, distribution lock"(system status)in the status of the service confirmation. Document is in Open status and with this error any changes are not replicating to the r/3. This is the only one document with such error. All other confirmations are getting replicated to R/3. Bdoc error segment for this confirmation is "NO upload into ERP,ERP adapter is called".
How can I remove this error? Any reports available to remove? what is the cause for this issue?
Thanks In Advance

Hi,
Please try to find the relevant bdoc in SMW01 . It is probably in intermediate status or there could be an error in the bdoc.
The must be a pending outbound queue or inbound queue in SMQ1 or SMQ2 in CRM.
One reason why the order is not uploaded properly can be due to filter settings in R3AC1 for object SALESDOCUMENT.
I.e. you would not allow to download the same document to CRM and therefore the complete loop is not run ok.
Please check R3ac1 as well.
If this is sill not helping please check as well the report CRM_ODE_CHECK_CFG (as per note 490932) and check if there might be obvious settings which might block the data transfer of this order type.
Best regards
Christophe

XI - Call Adapter Error - HTTP client. Code 402 reason ICM_HTTP_TIMEOUT

I am using HTTP adapter to post XML PO to vendor's site. We are having this problem with one of our vendor when PO's has more than 15 line items. XI server is getting error-"Call Adapter Error - HTTP client. Code 402 reason ICM_HTTP_TIMEOUT". Actually PO is posted good for the first time on vendor's site but XI is getting above error message and it keeps posting it again. Is there anyway to stop it otherthan manually stopping the XI message? Is there anyway to increase the wait time of the XI server to get the message.
Thanks in advance.
Mrudula Patel

I'm getting the same issue "500 TIMEOUT error" in runtime work bench-->IE--->Test Message. When i manually trigger the file.
The issue is basically from 01-01-2015 02:00 pm to 02-01-2015 01:am , File is picked from source ftp folder and places in archive but xml messages are not reflecting in SXMB_MONI.
Today suddenly after 01:00 am messages are successfully processing.
Please help on this issue. Many Thanks.

AdusnapMaintainSnapshot() : Error calling adusnapUpdateCurrentView()

Hi DBA's
I am getting the following error while running Maintain snapshot.
Reading: Product = "au", Directory = "patch"
/115
/115/sql
/115/driver
/115/readme
/115/import
/115/import/US
Incorrect number of arguments at line 4 of temporary output file:
/s04/SIT/sitappl/admin/SIT/out/ptscan.txt
Expected 2 arguments, found 3
AD Administration error:
Unable to get files for "patch" subdirectory
adusnapMaintainSnapshot() : Error calling adusnapUpdateCurrentView()
Error calling adusnapMaintainSnapshot
Backing up restart files, if any......Done.
You should check the file
/s04/SIT/sitappl/admin/SIT/log/adadmin.log
for errors.
[oracle@aqherptest out]$
Thanks and Regards,
SG

Hi Sawwan,
The above document helped to resolved the above issue, now i got the following error.
Processing object modules
Done processing object modules
File "atg_supp_patches.sql"
Either has No Version or Unknown error(-4)
Failed in adusnapGetDetailFileInfo()
AD Administration error:
Failed store Snapshot file info
adusnapMaintainSnapshot() : Error calling adusnapUpdateCurrentView()
Error calling adusnapMaintainSnapshot
Best Regards,
SG

Error Caller 09 contains error message - Data Marts loading(cube to ODS)

Dear all,
          Please ! Help me in this problem, This is very urgent.
          I have one process chain that loads data from BIW to BIW only through Data Marts. In that process chain, one process loads data from one cube(Created by us) & loads data to one ODS(also created by us). Data is loaded through full update & for the selected period specified in 'Calender Day' field in data selection.
         Previously I was able to load data for 2 months, but some days ago, suddenly one day, the process of Extraction got stuck in background for long time,& showed following error :
          Error message from the source system
          Diagnosis
         An error occurred in the source system.
          System Response
         Caller 09 contains an error message.
         Further analysis:
         The error occurred in Extractor .
         Refer to the error message.
         Procedure
         How you remove the error depends on the error message.
         Note
         If the source system is a Client Workstation, then it is possible that the file that you wanted to                load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
              Then we killed that process on server & after another attempt, It showed some calmonth...timestamp error. Then after reducing data selection period, It had been loaded successfully, after that I was able to load data for 20 days,Again after some days process got stuck,I followed the same procedure,reduced the period to 15 days & continued, Now I can't even load data for 5 Days successfully in one attempt, I have to kill that process in background & repeat it, then sometimes It get loaded.
         Pls, suggest some solutions as soon as possible. I am waiting for your reply. Points will be assigned.
         Thanks,
          Pankaj N. Kude
Edited by: Pankaj Kude on Jul 23, 2008 8:33 AM

Hi Friends !
                  I didn't find any short dump for that in ST22.
                  Actually , What happens is, Request continues to run in background for infinite time. At that time
Status Tab in Process Monitor shows this messages :
                    Request still running
                    Diagnosis
                    No errors found. The current process has probably not finished yet.
                     System Response
                     The ALE inbox of BI is identical to the ALE outbox of the source system
                       or
                     the maximum wait time for this request has not yet been exceeded
                       or
                    the background job has not yet finished in the source system.
                   Current status
                   in the source system
                    And Details Tab shows following Messages :
                    Overall Status : Missing Messages or warnings
                    Requests (Messages) : Everything OK
                            Data Request arranged
                            Confirmed with : OK
                     Extraction(Messages) ; missing messages
                            Data request received
                            Data selection scheduled
                            Missing message : Number of Sent Records
                            Missing message : selection completed
                    Transfer (IDOCS and TRFC) : Everything OK
                            Info Idoc1 : Application Document Posted
                            Info Idoc2 : Application Document Posted
                     Processing (data packet) : No data
                    This Process runs for infinite time, then I have to kill that process from server, & Then It shows Caller 09 Error in Status Tab
                    Should I Changed the value for that memory parameter of server or not ?. We r planning to try it today, Is it really belongs to this problem, Will it be helpful ? What r the risks ?
                    Please, give your suggestion as early as possible, I m ewaiting for your reply.
Thanks,
Pankaj N. Kude

Call of API for IBase contains errors

Dear All,
We are using solution manager 4 with SP13.When i try to create a Ibase through Initiate Data transfer for ibase,i gives the following error.
Call of API for IBase contains errors
Message no. CRM_IB050
Diagnosis
No import data was entered for one of the function modules (APIs) for Installed Base Management. Therefore, the function cannot be executed.
System Response
The system terminates processing.
Procedure
If the APIs are called in customer-specific programs, check the call for the APIs and change the call accordingly.
Please help to proceed,
Regards,
Avinash.

Good day,
Had the same error and solved it by doing the following;
Go to t/code DNO_CUST01 and double click on SFL1 and make sure "number range" is 01 and "action profile" is SLFN0001_STANDARD_DNO.
Your number range interval in t/code CRMC_NR_RA_SERVICE should be consistant with NR details in t/code DNO_NOTIF (check note: 498984 to set it up)
Good luck.
Cheers
Anthony Cunha

Call of API for IBase contains errors Message no. CRM_IB050

Call of API for IBase contains errors
Message no. CRM_IB050
Diagnosis
No import data was entered for one of the function modules (APIs) for Installed Base Management. Therefore, the function cannot be executed.
System Response
The system terminates processing.
Procedure
If the APIs are called in customer-specific programs, check the call for the APIs and change the call accordingly.
Can anyone help me in the above issue.
Regards,
Mirza Kaleemulla Baig

Hi Sai,
This is too late to reply this post, but to let everyone know about the issue I am posting here.
Start new UI session and put breakpoint at BUPR_EMPLO_DELETE and check parameter IV_X_SAVE everytime, till you get the error message. The parameter IV_X_SAVE should be same/consistent (either ' ' or 'X') in whole Logical Unit of Work. It should not change in between.
I faced the same kind of problem and found that standard was passing IV_X_SAVE = ' ' and in our custom code we were passing IV_X_SAVE = 'X'. I changed it to IV_X_SAVE = ' ' and my problem got resolved.
You can try the same. Please post the alternate solution if you find it.
Best Regards,
Rahul Koshti

Caller 09 contains error message in BI7

Hello Guru's,
We have a custom data source in r/3(full load) and we loaded full load last nigth to DSO and it is sucessfull.
Custom datasource is changed in r/3 today . so we replicated the datasource , activated Transformation , DSO , DTP, Deleted last nigth loaded request and try to load the data to PSA and we are getting following error message .
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
As it is common error we face in BI Implementation .
we followed these steps .
1) RFC Connection is checked and it is fine .
2) ST22 is checked and we couldn't see any error in R/3 side .
3) sm58 is checked and we couldn't see any IDOC'S in R/3 side .
4)Checked Extract checker RSA3 . we could see 10 records for that data source.
5) We thought it is Time stamp issue and we ran Program RS_TRANSTRU_ACTIVATE_ALL and activate the transfer rules and try to reload.( Not Sucessfull )
6) As above step doesn't make sence as we don't have Transfer rules for 7x datasource . we ran RSDS_DATASOURCE_ACTIVATE_ALL program and activated datasource and try to load the data and we have same issue.
7)we are checked Background user Aleremote . It is not locked.
8)BI side we relplicated datasource , activated , created a new infopackage and try to load the data . still we have same issue.
finally we thought it to be issue is not on Bi side and is on R/3 side .
Please let us know how to solve this issue .
Thanks,
PK.

Hi PokerKing:
You're getting the error because the structure of the data loaded yesterday is different from the structure of the data loaded today.
Delete the data both on PSA and on the DSO an reload.
Regards,
Francisco Milán.

Error calling Report and unable to bind Report Server

Hi,
I use Oracle Database 10g with Oracle Developer 10.1.2, in Windows 2000.
I don't have nor use Oracle Application Server though.
I tried to call a report from a Form, using Run_Report_Object.
But the following error appeared.
Error FRM-41213 Unable to connect to Report Server rep_<computer_name>
I also tried to call a report, using Web.Show_Document.
It launch another web browser, but the following error occured
REP-51002: Bind to Reports Server rep_<computer_name> failed
Based on the white paper of Oracle Application Server 10g - Integrating Oracle Reports in Oracle Forms Services applications.
I create my own report server using following command
rwserver server=repsrv.
Another java-based windows showed up. It shows that the server 'repsrv' is ready.
I do the following:
1. Navigate to http://localhost:8889/reports/rwservlet using web browser.
It showed OracleAS Report Services - Servlet Command Help page.
But there is no other window popup (The white paper stated that a 'in process' server
should be invoked when starting a report for the first time).
2. Navigate to http://localhost:8889/reports/rwservlet?userid=PRACTICE/PRTC@MYDB&report=C:\PRACTICE\FORM\MODULE1.JSP&destype=cache&desformat=html&paramform=no&p_1=P1&p_1=P2
my schema is PRACTICE, password PRTC and database instance MYDB
the report path = C:\FORM\MODULE1.JSP
The following error occured
REP-51002: Bind to Reports Server rep_<computer_name> failed
3. Finally, I tried
http://localhost:8889/reports/rwservlet?server=REPSRV&userid=PRACTICE/PRTC@MYDB&report=C:\PRACTICE\FORM\MODULE1.JSP&destype=cache&desformat=html&paramform=no&p_1=P1&p_1=P2
The following error occured
REP-51002: Bind to Reports Server repsrv failed
I don't understand.
It seems that the Report Service is not recognized although the java-based window state that the Report Server (repsrv) is ready.
My questions:
1. Does it means that my report server is not running?
Or it is running but the web browser didn't recognize it?
I use Internet Explorer 5 and Netscape 7, both of them showed the same error message.
2. The paper said there is supposed to be 2 type of server, 'In process' and custom server.
Both of them will create a configuration file in /reports/conf in DevSuiteHomeDirectory.
I can see the custom report server's configuration file which I create using rwserver
(repsrv.conf)
but I can't see the 'in process' server's configuration file (rep_<computer_name>.conf).
What am I supposed to do?
3. Is there any steps with I supposed to do after the installation?
Well, I didn't find any error during the installation, everything seems to be just fine.
Perhaps, I need to modify some files, specifya report server name,
create the 'in process' server manually.
Many thanks,
Imelda

Hi,
I have already tried your suggestion.
Since I am in Windows 2000 platform, so I do the first suggestion from the documentation.
If the host machine is not in a network (that is, it is a standalone machine).
Solution for Windows platform: Install the MS loopback adapter, as described on the Miscrosoft Web site (http:\\microsoft.support.com). Then, specify an IP address for your machine (either XP or Windows 2000), as follows:
1. On your desktop, right-click My Network Places, and choose Properties.
2. Right-click the MS loopback adapter, and choose Properties.
3. In the Properties dialog box, select Internet Protocol (TCP/IP), and click Properties.
4. Select Use the following IP address, and enter a valid IP address. The subnet mask field will automatically populate. Do not use the local host IP (that is, 127.0.0.1). For example, enter: 198.162.1.1.
5. Click OK, and follow the instructions displayed.
There is also solution for UNIX platform.
But I do the Solution for Windows platform only.
But still I've got the following error message :
REP-51002: Bind to Reports Server rep_<computer_name> failed
And in the command line of OC4J which I started, the following error appeared :
Not able to load oracle.reports.util.EnvironmentGlobal class
Using oracle.reports.util.Environment class
BTW,
I also tried to use the command lin rwrun :
rwrun report="D:\My Documents\TryReport\module1.jsp" userid=scott/tiger@orcl destype=file desformat=pdf desname="D:\My Documents\TryReport\module1.pdf"
And somehow a PDF file appeared.
It contains the output of the report I created.
It exactly the same as the preview of the web layout which is run from Report Builder (Run Web Layout CTRL-R).
Could this mean that the In-Process server is running?
Perhaps the browser did not understand how to connect to Report Server?
Is there anything should be done?
Should I also do the Solution for UNIX platform? (Mine is Windows)
And, why for Oracle Form (running as a servlet), everything seems to be normal?
Does the Oracle Form use different server from Oracle Report?
The problem is only when I tried to call report using a button inside Oracle Form.
(Run_Report_Object and Web.Show_Document)
Any light would be grateful.
Many thanks,
Buntoro

Version 4 Error: Expected Container, found Object Reference

We're in the process of upgrading our sequences from 3.5 to
4.0 and for the most part, everything is seamless. However, there is one situation I’ve found
that throws a RTE in 4.0 but works fine in 3.5.
When calling SetPropertyObject on an object reference, the following
error is thrown:
Parameter 'newValue': Expected Container, found Object Reference.
-17308; Specified value does not have the expected type.
Attached is a sequence snippet illustrating this
behavior. The last step should assign
the variable in Parameters with the name in TempStr (“Fred” in this example) to
the first element in the TraceObjRefs array (an array of object references).
What is really confounding is that this works as expected in
3.5. Any insight as to what changed or
what’s the best way to work around this?
Attachments:
AliasBreak35.seq ‏46 KB

We are seeing something similar in TS 4.1.
We have a container with subproperties which are also containers (of the same type actually). Technically, this is an array, we are using the container to be able to address by name. When I extract one of the sub-properties either by GetPropertyObject or by GetNthSubproperty and then try to assign it to a container of the same type, I get the error "Expected container, found object reference".
I attached a sequence with some experiments, using the NI_Limits type and found a solution: the Evaluate method seems to actually copy the values from the source container to the target; but only when it is not called as "PropertyObject.Evaluate()" but stand alone.
But I did not quite understand the mechanics of the aliases. In the sequence, I create an alias, as indicated in the previous posts. Then I can apparently not change that alias again. I used the "Data" member in the NI_Limits container to differentiate between the individual containers.
After the second SetPropertyObject, the value stays the same as before. But when I then change the value in one of the source objects, the other changes with it.
So I am not quite clear what an alias actually is and what its effects are.
Regards
Peter
Attachments:
TestObjRef.seq ‏6 KB

Attribute for user contains errors. Inform system admin

Hello,
We've got an issue with shopping carts created by a user that was deleted from system. When trying to see in Monitoring Shopping Carts header or item details of a given sc. A web error occurs:
The URL http://srp.srm.gruposalinas.com.mx:8000/sap/bc/gui/sap/its/bbpsc11/! was not called due to an error.
Note
The following error text was processed in the system SRP : Attribute for user contains errors. Inform system admin.
The error occurred on the application server srm-pro_SRP_00 and in the work process 2 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Form: OUTPUT_EXPRESS_MESSAGES of program SAPLBBP_SC_UI_ITS
Form: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
Module: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
We've cheked SAP NOTE 312058-BBPPU99: Error: Attribute for ... is missing. Inform ...
But it seems that none of the information applies to us, since this issue is only present for Shopping carts that were created by this deleted user.
So we tried to re-assing one of this sc, chaning PARTNER_NO,ADDR_NR
ADDR NP data in table CRMD_PARTNER according to a new given user, but it didn't work. So we need to know how to re-assing this sc or perhaps how to find what specific attribute is missing.
Any advice is welcome.
Thanks in advance.

Hi
Which SRM version are you using ? This is an SRM error message.
The manager role should be enough to change user attribute. The transaction is BBPATTRMAINT. Employee role should have BBPUM02 or BBPAT05 to change their own attribute.
Please check whether the User ID you are using to Log into BBP_PD (and seems to be assigned in the org structure also)is consistent and has no errors in tcode USERS_GEN. You should check the user, it's not set up properly in USERS_GEN Transaction, Else repair the user.
To maintain the user attributes you must have the Administrator role.. Your user should have role SAP_BBP-STAL_ADMINISTRATOR and be integrated in the org structure. your user must be integrated in SRM organizational structure. To see which attributes are missing, you can click on the user in PPOMA_BBP to see details, and go to last tab "Check". This will list all required attributes depending on used scenarios (so you may not require all of them). You can also use transaction BBP_ATTR_CHECK to check user's attributes for a particular scenario.
Please go through the following links as well ->
bbp_mon_sc attributes
Re: FM for attribute's value assignation in PPOMA ?
Note 751022 - Monitor Shopping Cart: Item deletion causes termination
Re: User Settings are not saved
Re: Not able to generate user users_gen
Re: SRM organization plan...
Re: User creation error
Hope this will definitely help. Do let me know.
Regards
- Atul

Error in BPM: "COMMUNICATION FAILURE" during JCo call. Error opening an RFC

hello experts
i am receiving the above error incase of BPM scenario where i am having a Transform step and synchronous RFC step.
i referred to the few threads discussing such problems and was trying to find whether my mapping is correct and i tested my mappings using my payload which looks good.
When looked into the Mapping trace of the BPM "Show container" i found error ""COMMUNICATION FAILURE" during JCo call. Error opening an RFC connection" and it seems that when BPM is attempting to call interface mapping it is throwing this error.
Thanks in advance.
Regards
rajeev

hi,
I think no problen with the mapping part,
jco connection requird when xi try to stablish the connection with the adapter .
please look the link provided.
Setup and test SAP Java Connector outbound connection
please also check the following parameter at the exchange profile
com.sap.aii.rwb.server.centralmonitoring.r3.ashost
com.sap.aii.rwb.server.centralmonitoring.r3.client
com.sap.aii.rwb.server.centralmonitoring.r3.sysnr
com.sap.aii.rwb.server.centralmonitoring.httpport
these parameter must be given properly.
if every thing is ok than and problem still exist than try to restart the system.
for us after restarting its worked fine.
regards,
navneet

VETS100A - Error - "Call contained error(s):ADS(2)

Similar Messages

Maybe you are looking for