VF03 and VA03

Hi to all,
    When we r displaying the billing line items in VF03 its showing some TAX code and GL account number in screen. But same line items disaplying in VA03 its doesnt have TAX code and GL account in the screen. WHat is the probelm in that.Can u give me the suggesion.
Moderator message : Not directly related to ABAP development. Post the question in relevant functional forum. Thread locked.
Edited by: Vinod Kumar on Jul 3, 2011 10:20 PM

GL account is required only in billing for accounting.
In Sales order, GL is not a MUST.
However, the TAX code should be seen in both.
Can you explain where do you expect to see it in the Sales order?

Similar Messages

  • Add a Toolbar button to standard sales order TCodes VA02 and VA03

    Hi,
      I would like to add a toolbar button standard SAP Tcodes VA02 and VA03. Upon clicking this toolbar button a popup screen should open up with some information. NO data needs to be transferred from this screen to the order, this will be just an information screen.
    How do I accomplish this? Thanks for reading.

    Hi,
    Check these:
    http://www.synactive.com/tutor_e/lesson00.html
    http://http.****************/Tutorials/Others/GUIXT/Page2.htm
    Regards,
    Subramanian

  • The special stock partner number is different in VA02 and VA03

    **Hi friends,*
      *its little bit critical*
          *my client raised Sales order and it was processed for delivery and billing also. now when we open sale order XYZ   in VA02 i.e, change mode There is special partner number is 189011 it is correct.*
    *and when we open same sale order XYZ  in display mode (VA03)  here The special partner number is changed and system showing ship to party number as a Special partner that is b1b1 actually it is ship to party number but system showing same number for both sp and sb as b1b1 thats is in VA03.*
    *can anybody please help out me

    Hi,
    Please check whether you have any screen variants / transaction variants assigned to the Tcode VA03.  The following thread will give you info about transaction variants in VA03.
    VA03 and SHD0 made me crazy
    Regards,
    P Gomatheeswaran

  • User exit for Pop-Up text Header Note II for transactions VA02 and VA03

    Hi ,
    Need  new user exit to call text pop-up functionality (used in standard at sales order creation) when modifying or displaying a sales order (VA02 / VA03)
    Text ID: ZX02
    Text Object: VBBK
    Text procedure: X1
    Access sequence: 6002
    Text is always shown at creation if exists for the SOLD-TO in the sold-to language, and is defined in customizing as to be displayed : V_TTXER_N-TXPFL = 'Y' or 'Z'
    This is checked in RV_TEXT_COPY
    NOTE: Present while creating the sales order , popup is coming to add the text.Same pop up required for VA02/VA03 transaction.
    Reason: all orders are entered via EDI . In these cases the info from the text is not displayed.
    Pl. let me know the user exit for above requirement.
    Moderator message: please do your own research before asking.
    Edited by: Thomas Zloch on Jan 13, 2011 1:50 PM

    How do you know "ECOM Order"?
    What constitutes a "HOLD"?
    I'd do something like:
    In USEREXIT_SAVE_DOCUMENT_PREPARE (SAVE has been pressed at this point and SAVE_DOCUMENT is to fire off other processes, etc).
    IF sy-tcode eq 'VA01' or sy-tcode eq 'VA02'.
      if vbak-something (identify your ECOM order)
        loop at vbap transporting no fields (Think it's back to VBAP at this point)
        where... (look for your hold indicator in every row)
      endloop.
    if sy-subrc eq 0. "found the hold
    message innn(class) display like 'E'.
    endif.
    endif.
    endif.
    Be VERY careful with ANYTHING that you put into SAVE_DOCUMENT exit form.

  • Tab in search help MM03 and VA03

    Hi experts,
    I added a new tab in matrn search help MAT1 (MM01/02/03) and it shows ok. But in VA01/02/03 item grid, the search help for matnr does not show the new tab.
    VAs tcode use S_MAT1 search help, but MAT1 is in S_MAT1 as collective search help. Are there anythings to do?
    How I add a new tab in VAs tcode search help in items grid for material???
    Thanks in advance.

    The item grid uses SD_MAT1 not S_MAT1 so there isn't a common collective search help where you can append your search help.  Just append your search help to SD_MAT1 as well.

  • Issue while uploading the document with VA02 and VA03

    Hello Experts,
    Can any body please help me out from this issue, as while uploading the PDF's, docs from VA02, VA03 in ECC6 EHP7 system.
    Steps to reproduce the issue - TX. VA02 --> service object --> create an attachment then we are facing like below
    Thank you in advance,
    Bhaskar N.

    Hi Bhaskar,
    Please check Tcode: SKPR08 - Category for Document Class) contains the Content server repository settings
    change the category of SOFFPHIO class to R/3, then you will able to attach any documents
    I hope it will help.
    BR
    AKJ

  • Invoice print

    while printing the invoice  a perticualr material code discription is shown different from wahtever mentioned  in vf03 and va03.
    i check material master , but shows no change log.
    Kinldy suugest. its urgent.
    Thanks,

    Hi,
    Since it is a print program issue, please check with your ABAP developer. Put a break point in the program and re-generate your output. Then you can exactly find where it is coming from.
    In the material mater, under "Additional Data" button (You can access from the Basic Data one screen) you can maintain different descriptions based on the language. Check whether you have maintained that description under that field.(Tab - descriptions)
    Best regards,
    Rahal

  • VF01 - VF03

    Hello !!
    I have to add additional authorisations for transaction VF01,VF02,VF03.
    Is there any common user exit for that transactions i can use to fill my authorisations ??
    BR, Jacek

    I have checked that exit before.
    I have solved problem on my own.
    Exits RV60AFZ* are used on the begining of the transaction only for VA01, for VA02 VA03 an action on that transaction must be done, so i used RV60AFZC for VA01 and i have made field exit for vbeln field for transactions VA02 and VA03.
    BR, Jacek

  • FBL5N Review Open and Cleared Invoices per Customer

    WHen one of our users goes into FBL5N to review open and cleared invoices he adds the WBS and the Profit Center. When the report runs it is blank. I looked at the invoice itself and the WBS and Profit center is on the invoice but I don't know why it doesn't show up on the report. Can anyone tell me why this happens? Do I need to make any kind of adjustment before running the report?
    Thanks

    I looked at the VF03 and there is a WBS and Profit Center on the Invoice. If this report shows Open and Cleared invoices then it should bring what is on the invoice in the report but doesn't.
    I had someone email me this response"
    Hi linda,
    For your info, The reason why profit center and WBS element blank in report FBL5N is, this report purposely used to display subledger account.When me made a posting, balance sheet account is not require
    cost object.Only PNL account require cost object.
    Regards,
    Abdul
    I would like to know what other report in SAP shows open and cleared invoices with the Profit Center and WBS?

  • How To setting when print billing and send E-mail in same time

    Dear gurus,
    I need your help.
    Now, I want to print Billing Doc from VF03 and when i click print the billing document will be save in my computer (in PDF format) and also send e-mail (and attached PDF file) in one time
    I design that email address will come from customize table that will use Payer and sold to party as key to file email.
    Then, I design to
    1. Create New Output Type
    2. Create Customize Table to find email
    But I want to know what I must do when I create new output type and how to call email address from customize table.
    Edited by: krittapong uaamporn on Jun 26, 2008 11:39 AM

    Hi
    Refer my solution in following tag
    Billing document to customer email ID
    Award if useful.
    Vijay

  • Search Help Parameter Default - Problems with VKO and VTW in Sales Order

    Hello,
    we've implementend an own serchhelp for the material-search.
    The fields VKORG and VTWEG have the default VKO and VTW.
    If I open this searchhelp in VA03 those values are not filled, if I open it in MM03 or ME23N those values are filled.
    My user has the VKO and VTW-parameters set.
    We have no custom "preselect-code" implemented.
    If I change the values to VKU and VTW the output is the same (works in MM03 / ME23N but not in VA03) (copied default values from MAT1S search help, didn't change my user parameters!)
    What could be the problem?

    Our searchelp was in our own append ZA_SD_MAT1.
    Solution:
    We deleted this append and added our search-helps to SD_MAT1 and now everythings works in mm03, me23n and va03.

  • Really Urgent: Problem in making link b/w sales order and production order

    Hi,
    I am trying to make link b/w the sales order delivery(VL03) by taking its Batch Number(LIPS- Delivery table) and linking with AFPO(Production order Table) field (batch no) so that i can see the fruther operations done o dat production order made against sales order,but it is not coming .
    I want to have help which allows me to make link b/w delivery (vf03) and the productiona order.
    plzz help me out it is really urgent.
    Edited by: ric .s on Apr 11, 2008 7:43 AM
    Edited by: ric .s on Apr 11, 2008 7:59 AM
    Edited by: ric .s on Apr 11, 2008 9:23 AM

    You have delivery no(VBELN) & itam no (Posnr)from lips table.
    Now
    1. go to VBFA table end get the corresponding sales oredr no and order item no.
    In VBFA table pass the delivery no in VBELN and delivery item in POSNN and 'J' in VBTYP_N and 'C' in VBTYP_V.
    Now VBELV & POSNV will return the sales order no and sales order item.
    2. Got to VBAP table and get the corresponding AUFNR to the order no and item no.
    3. Now with that AUFNR you will get a connection with AFPO(Production order Table.

  • VA01 and VA02 Search Help Mitigation

    Hello Everyone,
    I need to restric several search help results to users without authorization to see these values. All these search helps are in transactions VA01, VA02, and VA03. And that is my problem, since they are SAP Standard transactions I can't just modify the way these Search Helps are handle directly.
    I did try looking for Search Help Exits or some other Enhancement point where I could place my code and manipulate the Search Helps Information, but I couldn't find something that could help me. If you could please let me know if you know a way to do this, the Search Helps are:
    1. Restrict all the searches available in the account assignment tab at the header and item level of the sales order which allow access to view WBS information and projects.  Search Help COBL_EX_PRPM.
    2. Restrict the plant search that is within the engine model field at the header level of the sales order which that provide access to view the plants names and addresses.  Search Help H_T001W_C.
    3. Restrict all the sales group searches within the transaction. Search Help H_TVBVK.
    4. Restrict all the sales office group searches within the transaction. Search Help H_TVKBZ.
    5. Restrict all the product hierarchy searches within the transaction. I think the Search Help is PRODH.
    Thanks in advance,
    Carlos.
    Edited by: SapFigue on Feb 10, 2010 7:06 PM

    Please tell how did you do it. Because i have the same problem. I need to add extra field in the search help of the ORDER in SALES ORDER (VA01, VA02). I want to see both the ORDER and the DESCRIPTION in the search help of ORDER field.

  • How to fax Invoice from VF03

    Hello Everyone,
    I am looking to find out a way to allow the users to fax the invoice after it's created from VF03. All of our invoices are created with the output type which has the PDF image of the invoice. I am looking to investigate a way to allow the users to go into VF03 and be able to Fax the attached PDF to the customer. Any information in this regards will be appreciated. Thank you so much.
    Regards,
    Irfan

    Hi Irfan,
    We are going to create the billing document by using the VF01 T.code not by VF03.
    We cannot change the output also by using VF03.
    It should be done by using VF02 T.Code.
    Coming to your question:
    Pls maintain Output condition record record by using the T.Code VV31.
    Enter your output type and select valid combination and enter the required values.
    Select the medium as 2(FAX).
    Goto Communication medium.
    Enter the fax number and Enter the country.
    In the further data select the dispatch time as 4(When saving the application)
    Save.
    Or another way is go to VF02 screen after creating the invoice,Select your required output type and then select the medium as 2(Fax) and in the further data select the dispatch time as 4(When saving the application).In the Communication medium enter the fax number and Enter the country.
    Save.
    Regards,
    Mohan.

  • Restriction in Output on transaction VF03 - Display Billing Document

    Hi Experts,
    Is there any way to restrict the Output on transaction Display Billing Document, I mean, on transaction VF03 and after you select a Billing document (Document number), go to Billing Document -> Issue Output to. This is because we currently have an Output Selection with two message types and what we need is to restrict one of the message types for a group of persons.
    Can this be restricted using authorizations? Is there any way to restrict this?
    I made some tests using system trace (ST01) but I couldn't find the way to restrict this.
    Can somebody help please?
    Best Regards,
    Erik Espinosa

    The message types are invoice forms.
    We have implemented an electronic invoice schema in our organization, and now when you want to print an invoice the system gives you two options for printing a document. Each of the options are message types that manage certain values and put them in a print form, so what we want to do is that only managers can access to option1 and the rest of the organization can access option2.
    This means that when managers try to print the invoice using option2 the system won't let them. They only will print invoices from option1.
    I tried to look for an authorization object in order to try to force the restriction with it, but I couldn't find one.
    This objects are called output types and what we need to do is restricting the use of the output types based on values for option1 and option 2 using Z roles.
    Regards,
    Erik
    Edited by: Erik Fernando Espinosa Zambrano on May 16, 2009 9:59 AM
    Edited by: Erik Fernando Espinosa Zambrano on May 16, 2009 10:01 AM
    Edited by: Erik Fernando Espinosa Zambrano on May 16, 2009 10:03 AM

Maybe you are looking for