VF04 field value displaying all same as first value.

Hi all, I have problem I wish you could help.
When I run VF04, the ZTERM field in ALV report displaying the same value which is the first record's ZTERM value.
Got any idea why it would happen?
Thanks.
Edited by: Taner Güngör on Jan 12, 2009 10:55 AM
Edited by: Julius Bussche on Jan 12, 2009 11:09 AM
Please use meaningfull subject titles

Have you customized to add zterm field the ALV...
Then Its a clear case of clearing the work area problem...
try clearing the zterm field at appropiate point ..and see problem resolved
thanx.
Vijay

Similar Messages

Does not display all content after first loading of page

Hello all,
I am having quite strange problem which is hard for me to figure out.
I have 8 buttons on my web site. Each button will display different content. My page is: www.itconnect.co.nz
When you go to my page first time, by default "Design & Software" button will be active. Here when you look on first photo you can see that the bottom part is missing - logos.
However when i click again on "Design & Software" button the missing content will appear.
What could be the problem ?
Thank you to everyone who would like to help.

I am little confused as i don't use flash - only for the Captcha.
The way i did is:
<div class="sp">
    <div class="tabs">
                <span class="repairs">Repairs</span><span class="design">Design & Software</span>
               <span class="security">Security</span><span class="networking">Home Networking</span>
                <span class="communication">Communications</span><span class="cloud">Cloud Solutions</span>
                <span class="maintenance">Maintenance</span><span class="remote">Remote Support</span>
      </div>
      <div class="panel_container">
                <div class="panels">
                                <div class="panel repairs">
                                                <div class="panel_content">
                                                                HERE GOEST THE CONTENT
                                                 </div>
                                </div>
<div class="panel design">
                                <div class="panel_content">
                                                                HERE GOES THE CONTENT
                                                </div>
                                </div>
                                AND SO ON FOR THE OTHER PANELS
                    </div>
</div>
</div>
For my CSS I have:
.sp {
                width: 960px;
                position: absolute;
                margin-top: 0px;
                margin-right: 0px;
                margin-bottom: 10px;
                margin-left: 0px;
.sp .tabs {
                width: 41%;
                float: left;
                height: 450px;
                display: table-column;
.sp .panel_container {
                width: 58%;
                float: right;
                overflow: hidden;
                position: relative;
And for the animation I use JavaScript.
Thanks in advance

Tabbed Panels displaying all content in first panel

I'm trying to add a tabbed panels widget to my site but when it displays in browsers, the content from all of the tabs displays as a list in the first tab, and clicking the rest of the tabs does nothing. I just put the out-of-the-box widget onto my site and that won't work either. W3 validating only came up with one error, being: (Line 104, Column 42: there is no attribute "tabindex" <li class="TabbedPanelsTab" tabindex="0">Tab 1</li>)
The page I thew the widget on to test it is http://www.herbsmithrx.com/test.asp
What am I missing?

You are missing the javascript constructor script, which should have been inserted on your page below your widget when you inserted the tabbed panels:
Somehow, the script is appearing above your widget in your page. Place this code BELOW your tabbed panels widget on your page:
<script type="text/javascript">
var TabbedPanels1 = new Spry.Widget.TabbedPanels("TabbedPanels1");
</script>
That should fix it right up.
Beth

Cover flow displays the same two pieces of artwork for all videos.

I've been adding a collection of tv series I have on DVD to iTunes 9.1.1, it all worked fine initially, I opened each video up of a series of tv programs and used the "Set Poster Frame" option to capture a frame of the program to use as the artwork for that program.
I normally have the programs sorted by what tv program they belong to, so Cover flow only displays the first episode of a series' artwork. I'm not sure why though but something I did yesterday appears to have caused cover flow to blow a fuse.
If I chose to sort by name before, cover flow would display all the artwork for each episode, and it showed all the different artworks correctly. Now though after some fiddling I did which I cannot seem to recount my steps back to, it only displays the same two pieces of artwork from two particular episodes for all the videos when it is sorted via name:
http://img257.imageshack.us/img257/3052/tvprogcoverflow.png
I've tried removing all the artwork, but there doesn't seem to be an option to delete the poster frame and the poster frame artwork doesn't show up under the artwork tab for the individual videos so I can't delete anything from there. If I select all the videos and then right click and get info, then select the artwork check box and click OK it seemingly deletes all the artwork... Then replaces it again with the exact same artwork!
Although cover flow shows each video has having the same artwork if I Get Info each video it clearly shows it having the correct artwork so why cover flow is messing around like this I don't know.
I've tried deleting the album artwork cache in the itunes folder, didn't work. I even tried deleting my entire itunes folder which I have separate from my library and the hidden prefs file in my actual library, but that didn't work either.
Interestingly enough, if I re-add all the videos they automatically get listed as films and go under the film tab. When looking at them under their cover flow correctly shows every episode with the right artwork:
http://img200.imageshack.us/img200/8234/filmcoverflow.png
As soon as I change the Get Info options tab from Film to TV program either for one video or all of them, then cover flow screws up again.
Any idea how to fix this annoyance?

The weird thing is, it worked before. I encoded all the videos previously and had them all listed and didn't encounter this problem, but I noticed I'd forgotten to decomb/detelecine the videos so I deleted everything and re-encoded it all. AFter filling the tags out and setting poster frames again I was thinking of making life easier by just pasting the same artwork for every episode, so I did, but didn't like the results so I deleted it again (I selected every video, used Get Info and pasted the artwork that way).
I think it was after this that the problem started to occur. In any case I've been through every episode and made sure the name, series, episode and episode id fields are all filled in with incremental values and they are. I even made sure the Sort Name field was filled in on every video. But this didn't work either.
So, thinking another restart was needed I deleted every video again. Re-encoded them all, again. Set the tags for every video and poster frame again. Finished it all off nicely, checked cover flow and was highly annoyed to find it was STILL showing the same two pieces of art work for every video as shown in that image I posted.
Ultimately, I wouldn't care so much that cover flow is screwing up like this as I always intended to sort by program anyway so it would only ever display one piece of artwork for an entire series of videos, however where-as when it was working it picked the artwork for the first episode of a series to display, its instead picking one of the latter episodes. I can't seem to find any way of choosing what artwork I want displayed.

How to display all value of metadata from nodes collection model in content presenter template

Hi All,
first of all the new look of OTN is great.
coming to problem i am facing (i dont know whr to ask here or in portal forum).
i am creating a content presenter template to display list of items.
now as per requirement i need to create a drop down to filter the list.
now while check- in a file author would choose a value in one metadata field lets say xCategory(which is a single select list).
i have to display similar category list on portal to allow user to filter list.
i could hv used view of xCategory but problem is files are targeted to role using ACL. so u see i cant display all category to all users.
also customer wants this whole thing to be Dynamic i.e. they can add value of xCategory later that to could be only for specific role (on portal it should be role specific , author can see whole list not a problem there).
so what i think is if content is given as search result so the category. so now if i can get the all xCategory metedata from 'nodes' collection model in template i can create drop down with out having any additional bean.
somthing like this
#{nodes.xCategory} (but this one is not correct).
please suggest me any solution.
thanks
-somesh

Hi,
you can do all of what you said with JSF. ADF Faces provides drag and drop functionality (have a look at the Web Developer Guide) that allow you to move nodes within a tree. The drag and drop framework sends an event notification to the server with a reference to the changed node.You can also have context menus on a tree node to help users creating, deleting and editing a tree nodes. JavaScript isn't required at all, even if you wanted to drag and drop a row in a table on top of a tree node to create a new tree node.
I just finished a book project in which we explained this usecase. As soon as I find the time, I'll follow up with a blog entry on this as it seems to be a common requirement. However, as mentioned, the web developer guide on OTN explains drag and drop in ADF Faces pretty well.
However, if you choose the "Search" link above, choose JDeveloper and ADF as the product to search for and type drag and drop as the search string, then you get lots of code sample posted in the past to this forum
Frank

How to show header value in each page same as Page field value.

Hi there
It would be very helpful if anyone could tell us how to set header value based on the page field.
To make it more clear.. i have a field in my Rtf (which is basically a group by) so in each page it'll differ.. My Header should reflect the same as field value.
what my understanding is header wont change for each page. but ,my requirement is something like i have to show the header which is same as one of my filed value..
for eg:
HEADER: ABC page-1
Field - ABC
HEADER:XYZ page-2
Field - XYZ
Regards - Vijay
Edited by: Vijay Santhanam on 23-Oct-2008 3:51 PM

Hi Haiye ,
The Pointer you gave would keep Header ABC through out all the pages in report right, actually i had tried this and got same header for all pages,
but what i need is my first page Header should be based on one of the field of Page 1, second pge Header again based on the same field, but the value may differ... (coz the page field is group by ).
Would appreciate your help on this issue!!
Regards - Vijay

Change field value in a table, based on another field value in the same row (for each added row)

Please Help, I want to change field value in a table, based on another field value in the same row (for each added row)
I am using this code :
<HTML>
<HEAD>
<SCRIPT>
function addRow(tableID) {
var table = document.getElementById(tableID);
var rowCount = table.rows.length;
var row = table.insertRow(rowCount);
var colCount = table.rows[0].cells.length;
for(var i=0; i<colCount; i++ ) {
var newcell = row.insertCell(i);
newcell.innerHTML = table.rows[1].cells[i].innerHTML;
switch(newcell.childNodes[0].type) {
case "text":
newcell.childNodes[0].value = "";
break;
case "checkbox":
newcell.childNodes[0].checked = false;
break;
case "select-one":
newcell.childNodes[0].selectedIndex = 0;
break;}}}
function deleteRow(tableID) {
try {var table = document.getElementById(tableID);
var rowCount = table.rows.length;
for(var i=0; i<rowCount; i++) {
var row = table.rows[i];
var chkbox = row.cells[0].childNodes[0];
if(null != chkbox && true == chkbox.checked) {
if(rowCount <= 2) {
alert("Cannot delete all the rows.");
break;}
table.deleteRow(i);
rowCount--;
i--;}}}catch(e) {alert(e);}}
</SCRIPT>
</HEAD>
<BODY>
<INPUT type="button" value="Add Row" onClick="addRow('dataTable')" />
<INPUT type="button" value="Delete Row" onClick="deleteRow('dataTable')" />
<TABLE id="dataTable" width="350px" border="1">
<TR>
<TD width="32"></TD>
<TD width="119" align="center"><strong>Activity</strong></TD>
<TD width="177" align="center"><strong>Cost</strong></TD>
</TR>
<TR>
<TD><INPUT type="checkbox" name="chk"/></TD>
<TD>
<select name="s1" id="s1">
<option value="1">1</option>
<option value="2">2</option>
<option value="3">3</option>
</select>
</TD>
<TD><input type="text" name="txt1" id="txt1"></TD>
</TR>
</TABLE>
</BODY>
</HTML>

Hi,
Let me make sure u r working with table control.
First u have to create a event(VALIDATE) to do the validation.
Inside the event,
1. First get the current index where user has pointed the curson
2. Once u get the index read the internal table with index value.
3. Now u can compare the col1 and col2 values and populate the error message.
1. DATA : lo_elt TYPE REF TO if_wd_context_element,
l_index type i.
lo_elt = wdevent->get_context_element( name = 'CONTEXT_ELEMENT' ).
CALL METHOD LO_ELT->GET_INDEX( RECEIVING MY_INDEX = l_index.
above code should be written inside the event.
Thanks,

Conditional Display Based on a Field Value

I'm a newbie ...
I developed an application that shows payment information.
Record type one is a cheque
Record type two is a payment stub
Rec Type Account Amount PDFFile
1 888888 1234.00 summary.pdf
2 888888 10.00
2 888888 400.00
2 888888 800.00
2 888888 24.00
I have developed a program that assimilates a number of cheque images into a single pdf file. I write the filename and location of that pdf file into a field on 'record type one' (cheque record).
I want to have a button that only renders on records that that have a value in this field.
I've looked at conditional display, but can't seem to find the right option.
Can anyone get me pointed in the right direction?
Thanks
Dave

Dave - Where do you "write" this field? On the same page or from a previous page? What is the display type of this field (which I hope is implemented as an Application Express page item)?
It's all about having a value in session state for that page item at the time your button is rendered. If you've got that, then the button condition will be trivial.
Scott

Custom module pool + Amount field decimals display same as standard screen display

Hi All,
Requirement: A custom module program screen field has to be designed which displays decimal values of amount fields same as amount fields in standard screen.
Standard screen behavior: If the standard screen fields are observed, they refer to data elements WRBTR or AZSOL_F05A (transactions FB50/FB03/FB01). However, number of decimal places that are visible on screen are dependent on the currency that is provided.
Both the data elements have 2 decimal places.
For currency USD two decimal places are displayed - in TCURX - decimal places are two.
For currency JPY or CLP - zero decimal places are displayed - in TCURX - decimal places are zero.
i.e., even though the screen field refers to data element or domain that has the characteristic to show 2 decimal places, based on currency, decimal places are adjusted.
I would like to know how this is happening on standard screen fields.
Solution Required for: How to make the custom screen amounts to display same number of decimal places as standard screen amount fields.
P.S: Before posting the query here, research has been done in SDN and other places. It has been identified that quantity fields adjustments are discussed. However for amount field even though discussed earlier, did not reach a conclusion.
I would like to get a solution for this one.
Thanks in advance.
Goutham.

Thank you all for taking time to take a look at this query.
This issue has been resolved.
Resolution: If the standard transactions (FI transactions in specific) are observed, whenever there is a field that displays amount value, there will be a corresponding field (may not be beside the amount field, somewhere on the screen or in the same sequence of screens) where the currency key value would be entered.
For instance, if you look at FB50 - there is field on top for the user to input currency key value (like USD or CLP or INR).
When any amount field is declared - this currency key field is provided as the reference field in the screen attributes of the amount field.
In short, in the custom module pool program, provide a field that holds currency key value and use this field as reference field for the amount fields.
Do repond to this thread if the resolution is not clear.
Thank you all once again.
Goutham.

Screen exit MEREQ001- Copy 1 PR line item custom fields values in all

Hi,
I have implemented the Enhancement MEREQ001 to add a new tab for Purchase Requistion screen at line item level .
Requirement for me is to show the same data in the newly added tab for all line items and also to save the same data in EBAN table.
I am facing a problem while saving the data. In EBAN table, the data was saved for all line items. But the custom added field values are saved for only the line item displayed.
I ll explain with an example for better understanding.
I have created a PR with 3 line items ITEM1, ITEM2 ,and ITEM2
When i saved the data when ITEM1 is displayed, EBAN have custom added field values for ITEM1 but not for ITEM2 and item3.
The same way, if I save data when ITEM2 is displayed, EBAN has custom added field values for ITEM2 but not for ITEM3 and ITEM1.
Now, my requirement is to get the all line items ITEM1 & ITEM2 and ITEM3 updated with custom added field values in EBAN.
The logic i added in ME_PROCESS_REQ_CUST~CHECK are as below.
       i_items             TYPE mmpur_requisition_ite                       ,
        lv_if_item          TYPE REF TO if_purchase_requisition_item,
        lt_itm_data         TYPE mereq_item   .
DATA : LV_dept TYPE EBAN-ZZDEPARTMENT ,
        lx_itm_data type mereq_itemx.
    CALL METHOD im_header->get_items
      RECEIVING
        re_items = i_items.
    LOOP AT i_items INTO wa_item.
      lv_if_item = wa_item-item.
      CALL METHOD lv_if_item->get_data
        RECEIVING
          re_data = lt_itm_data.
      CALL METHOD lv_if_item->get_datax
      RECEIVING
      re_datax = lx_itm_data.
     IF lt_itm_data-zzdepartment IS INITIAL.
         lt_itm_data-zzdepartment = LV_dept .
         lx_itm_data-zzdepartment = 'X' .
      ELSE.
         Lv_dept = lt_itm_data-zzdepartment.
    ENDIF.
To set the value for all line item.
        CALL METHOD lv_if_item->SET_DATAX
          EXPORTING
          IM_DATAX = lx_itm_data.
    CALL METHOD lv_if_item->Set_data
        EXPORTING
          IM_data = lt_itm_data.
    ENDLOOP.    " LOOP AT i_items INTO wa_item.
ENDIF.    " IF ( NOT ls_header1-banfn IS INITIAL
BUT above logic is not working
Please give your inputs
Thanks in advance
Deepanker Dwivedi

HI,
You can use GET CURSOR LINE LINE_NO this will give you the sy-index so that you can read the itab like
read table itab index line_no. This is one option and second is if you have row selector.
read table itab with key mark = 'X'.
If you want the Row contents befor the PAI triggers
[Check this Thread|Table Control dynamic F4;
Hope this is clear to you.
Regards
Ram

Text Field value display twice in Adobe Form.

Hi Experts,
I want to display a text field value twice in a ADOBE FORM but it only display at first occurance of the text field.
Please suggest me possible solution.
Regards,
Abdul

Why don't you have two different text fields in the interface and bind them separately at the two different places in the form. In the driver program you can control the value being passed to be same for both the fields.
Regards
Ranganath

Displaying All Values from a Multiple Value Parameter

Hi,
Using XI, I have a parameter field that allows the user to enter multiple values Eg. 01, 02, 13, 14. I want to create a formula to display all the values the user has selected.
Is there a way to do this?
Thanks,
Brian

join({?Parameter},",")
creates a string with the items in your parameter separated by commas

Custom Field value is not getting populated in Display mode

Hi Experts ,
I have created a custom field on sales tab for BP Role Bill to prty in BP transaction in SAP CRM. The problem i am facing is that , after i chose my sales area field value is not populating in first time no matter whether i am in display or change mode but the moment i switch to the other mode the value is being populated. Kindly help me in solving this.
Regards,
Ameet

Dear Chetan,
If the field is added through AET, can you please check the Get & Set Methods?
If the field value has fixed values which you have defined while creating, then check GET_V & GET_P methods.
Thanks & Kind Regards,
Ravi Kumar A R

Need to get 2 fields displaying on same line, but close together

hi -- I have 2 related fields that I want to display on the same line -- the first has length of 10, the second length of 20.
On the same page, I also have some fields that are length 100.
Let's call my first field ID and my second field NAME. I want NAME to display quite close to ID (maybe about 5 characters apart).
I have its Begin On New Line = NO in display attritutes, Field = YES, and col and row span = 1.
But the field of length 100 -- let's call it BIG -- causes problems. NAME displays way out to the right, beyond the end of BIG.
I've tried setting the column span on BIG to 3 or 4; it helps a bit, but not much.
I'm not sure how column widths on a page (if there is such a thing) are defined, but I'd like to get NAME displaying in the
column after ID (or close to it, whatever will help me do this), where the space between ID and NAME is maybe 5 or 10 characters.
How can I do this?
Thanks much,
carol

hi Denes -- I've looked extensively at your example, and I think I understand conceptually what needs to happen. But I'm not
quite getting yet. I've been playing around alot with the column span of the various items on my page... I'm wondering if you'd
take a look at something I posted on apex.oracle.com. (workspace dew_mir, user [email protected], pswd labitu). Application 30636
Field LOV Display, page 2.
Of the left fields, Site Name, Site Common Name and Description are col span of 3. Latitude, Longitude, Elevation, Date Time Loaded
and Date Format are col span of 2. The rest (the short ID fields) are 1.
Objecttype Name and Lat Name represent the fields I want displaying further to the left. I'd expect Objecttype Name to
be rendered after the end of the first column, which I would think would be just to the left of the short ID fields. Instead,
it looks like it starts after the 2 column fields. For Lat Name, I'd expect that to be rendered at the end of the second column,
which I'd think would be just to the left of the lat/long/elevation fields, but it's after the 3 column fields.
Clearly there's something I don't understand about how columns are set up.
Thanks,
Carol

How to display field value only once in REUSE_ALV_GRID_DISPLAY

hi experts,
               i am using REUSE_ALV_GRID_DISPLAY, for alv outpur display.but i want one of the field in output ,not to display the value which is of same, it have to be displayed only once, I mean i have a number which contains multiple line items corresponding, here i want to display the field value only once when it is repeating , for the same header number, how can i achieve it

Hi,
check the sample code,
REPORT Z_ALV.
Database table declaration
TABLES:
sflight.
Typepool declaration
TYPE-POOLS:
slis.
Selection screen elements
SELECTION-SCREEN BEGIN OF BLOCK blk_1 WITH FRAME TITLE text-000.
SELECT-OPTIONS:
s_carrid FOR sflight-carrid.
SELECTION-SCREEN END OF BLOCK blk_1.
Field string to hold sflight data
DATA:
BEGIN OF fs_sflight ,
    carrid   TYPE sflight-carrid,      " Carrier Id
    connid   TYPE sflight-connid,      " Connection No
    fldate   TYPE sflight-fldate,      " Flight date
    seatsmax TYPE sflight-seatsmax,    " Maximum seats
    seatsocc TYPE sflight-seatsocc,    " Occupied seats
END OF fs_sflight.
Internal table to hold sflight data
DATA:
t_sflight LIKE
   STANDARD TABLE
         OF fs_sflight .
Work variables
DATA:
t_fieldcat TYPE slis_t_fieldcat_alv,
fs_fieldcat LIKE
         LINE OF t_fieldcat.
*START-OF-SELECTION
START-OF-SELECTION.
PERFORM get_data_sflight.            " Getting data for display
PERFORM create_field_cat.            " Create field catalog
PERFORM alv_display.
*&      Form create_field_cat
      Subroutine to create field catalog
      There is no interface paramete
FORM create_field_cat .
PERFORM fill_fieldcat USING   'Carrier Id'    'CARRID'   '2'.
PERFORM fill_fieldcat USING   'Connection No' 'CONNID'   '1'.
PERFORM fill_fieldcat USING   'Flight Date'   'FLDATE'   '3'.
PERFORM fill_fieldcat USING   'Maxm.Seats'    'SEATSMAX' '4'.
PERFORM fill_fieldcat USING   'Seats Occ'     'SEATSOCC' '5'.
ENDFORM.                                    "create_field_cat
*&      Form fill_fieldcat
      Subroutine to fill data to field column
     -->p_seltext      Column label
     -->p_fieldname    Fieldname of database table
     -->p_col_pos      Column position
FORM fill_fieldcat USING
                    p_seltext    LIKE fs_fieldcat-seltext_m
                    p_fieldname LIKE fs_fieldcat-fieldname
                    p_col_pos    LIKE fs_fieldcat-col_pos.
fs_fieldcat-seltext_m = p_seltext.
fs_fieldcat-fieldname = p_fieldname.
fs_fieldcat-col_pos    = p_col_pos.
APPEND fs_fieldcat TO t_fieldcat.
CLEAR fs_fieldcat.
ENDFORM.                    " fill_fieldcat
*&      Form get_data_sflight
      Subroutine to fetch data from database table
      There is no interface parameter
FORM get_data_sflight .
SELECT carrid
         connid
         fldate
         seatsmax
         seatsocc
    FROM sflight
    INTO TABLE t_sflight
   WHERE carrid IN s_carrid.
ENDFORM.                    " get_data_sflight
*&      Form alv_display
      Subroutine for ALV display
      There is no interface parameter
FORM alv_display .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      it_fieldcat   = t_fieldcat
    TABLES
      t_outtab      = t_sflight
    EXCEPTIONS
      program_error = 1
      OTHERS        = 2.
IF sy-subrc NE 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " alv_display
End of code

VF04 field value displaying all same as first value.

Similar Messages

Maybe you are looking for