Vfw capture device not found, but netmeeting does...

Hi!
I have a problem with my USB cam. In netmeeting i can see the picture, which the camera serves. But in the JMF, the device cannot be found.
java VFWAuto.... no result
with CaptureDeviceManager.getDeviceList.....null
in jmfregistry.exe....not found.
Now i am confused. I thougt netmeeting only supports the vfw, but java should then find it, doesnt it?
Who can help me?
regards,Matze

Set the JMF_HOME environment variable, and try running jmfinit.exe a couple of times until it detects your webcam.
regards,
Owen

Similar Messages

  • Photosmart 7515 connect via USB but not wireless, Device not found on Network

    Purchased a 7515 all-in-one, was able to setup wirelessly to MacPro but has lost ability to connect wirelessly.  This happened with OS X Lion and nor MountainLion.  Have a TimeMachine Airport.  Printer connects to network but during setup from MacPro, repeatedly get "Device Not Found on Network" after stepping through wireless installation setup screens.  I have reset router, printer, firmware updates, software updates.... at wits end.  I have followed the instructions on the below resource page link with no luck.  Use WPA-PSK encryption (Automatic AES or TKIP) on network and diagnostics on printer pass.
    Please help anyone!
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02946597&tmp_task=solveCategory&cc=us&dlc=en&la... 

    It sounds like the Macs and the printer just aren't communicating.
    If you press the network icon on the printer, does it indicate it is connected to the network?
    I recommend two additional steps that are not listed in the linked document.  The printing system of the Mac may need to be reset as it will clear any software that could be interfering (such as corrupted installations).
    Follow the steps as outlined for 10.7 or 10.8 in this document from HP.
    The next step is to install the driver package from Apple.  This can be found here.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Boot device not found, hard disk not exist.... does that mean my computer is dead?

    Suspecting that Im in a world of hurt here. I tried turning on my computer and it says "boot device not found" - run in test failed... when I hit F4 and run a hard disk test it says "hard disk not exist". The memory test passes, but under the boot device not found it says in blue "please install an operating system on your hard disk"... and to make matters worse it's making some funny noises when it tries to boot.
    Is there any hope at all that this computer will work again? Is there any chance that any of the things I had on my hard disk can be recovered?
    This question was solved.
    View Solution.

    You're very welcome, Jonathan.
    dv5 still isn't enough info for me to provide the service manual (in case there are differerent ones for the different dv5 models).
    However here is the link to the service manual I randomly pulled.
    http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01550108/c01550108.pdf
    Assume it is safe to say all dv5 models come with SATA notebook drives.
    So, if you want to spring for $15, you can get this enclosure which apparently has very good reviews.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16817182138
    From what you are describing (noise and stuff), I would say you don't have much of a chance to recover data but that is up to you if you want to try the enclosure or not.
    Here is what I recommend:
    Yank the hard drive, and power on the notebook.
    If the odd noise you heard is gone, then you can pretty much safely assume the drive was the cause, and that replacing the drive, and reinstalling the operating system will solve the issue.
    If the noise is still there, then there could be another issue, and it might be risky throwing good money after bad.
    Paul

  • Upgraded to Maverick. Now cannot connect to wifi. All my other devices will connect. Have rest wireless hot spot switch and cable modem. Other devices still connect but MacPro does not. MacPro wireless is self assigning an IP address blocking access.

    Upgraded to Maverick. Now cannot connect to wifi. All my other devices will connect. Have rest wireless hot spot switch and cable modem. Other devices still connect but MacPro does not. MacPro wireless is self assigning an IP address blocking access. It will connect if I connect to my iPhone hot spot via wifi. Any ideas?

    If you follow this video you'll see how to delete your WiFi AP from the OS, this will allow you to select it again which I feel will correct your problem.
    https://app.box.com/s/fe7v7h7kywjr23spumqp

  • TS1389 When I go to play a movie, I get prompted that the original file cannot be found.  When I do a search on spotlight it cannot be found, but it does appear in my purchases.  How do I re-download when it does not appear that it is allowed?

    When I go to play a movie, I get prompted that the original file cannot be found.  When I do a search on spotlight it cannot be found, but it does appear in my purchases.  How do I re-download when it does not appear that it is allowed?

    Hello paddyrb154,
    Thank you for the details of the issue you are experiencing with your purchased movie in iTunes on your iMac.  It sounds like iTunes thinks the movie is on your computer, but it is not located in the iTunes Media folder. 
    For an issue like this, I recommend deleting the movie from iTunes and downloading it from the iTunes Store again.  Use these steps to delete the movie:
    Mac or PC
    Launch iTunes.
    From the Library pop-up menu, choose Movies.
    Click Movies in the navigation bar.
    Click the movie you want to delete.
    Press the Delete key on your keyboard.
    In iTunes 11, the movie cover art will remain visible, but a cloud icon will appear on it to allow you to download the item again (in countries that support this).
    How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
    http://support.apple.com/kb/HT5772
    Once you have deleted the movie, you can click on the cloud icon to download the movie again.  If you do not see the cloud icon, use the steps in the section titled “Download previous purchases on Mac or PC ” in the following article to download the movie from your list of past purchases in the iTunes Store:
    Download past purchases
    http://support.apple.com/kb/ht2519
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Camera not working (No video capture devices were found)

    Hi,
    Macbook air late 2010 upgraded to 10.9.2 camera not detected, it was working 2 minutes before upgrade.
    system info states - No video capture devices were found.
    I have re-installed 10.9.2 clean using cmd-r on startup,
    repaired permissions,
    reset SMC
    still getting - No video capture devices were found.
    anyone got any advice,
    Thanks,
    Charles

    Hi,
    Ok switched my Macair on to re-install 10.9.1, thought I'd give facetime one last try and its working
    So the way I fixed it was to uninstall all 3rd party video driver (like airparrot).
    This did not fix problem, booted up holding the Command-R keys.
    Re-installed Maverick
    Restarted
    Camera was still not working
    Downloaded latest Skype
    Ran Skype - no camera detected in preferences
    Repaired permissions using Disk Utility
    Left it on for few hours
    Restarted next morning, opened Facetime, now everything is working
    Charles

  • Ipod touch does not show up under Devices in iTunes, but it does in iPhoto

    My iPod touch does not show up under Devices in iTunes, but it does show up under iPhoto.  Can anyone help troubleshoot this problem?
    Thank you for your help.

    try following the info here
    http://support.apple.com/kb/TS3694#error1611
    Error 1611: This error may indicate a hardware issue with your device.  Follow the steps  in this article. Also attempt to restore while connected with a  known-good 30-pin Dock Connector cable, computer, and network to isolate  this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0)  can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611.    To troubleshoot third-party security software, follow these steps.

  • T410 broadband device not found

    Hello
    I am trying to get the built in broadband device work (of course i have purcached the device and installed the hardware aswell as all the required softwares and driver which means the qualcomm gobi 2000 usb composite device 9205 driver and all the thinkvantage sofwares: access connection, active protection system, keyboard customizer utility, mobile broadband connect)
    What i'm experiencing is that in the wireless connection status window / mobile broadband tab , under the connection status i see that it has recognised the t-mobile network i should be able to connect to. It says that i have a working connection for minutes with a good quality signal, but when i actually try to connect through the acces connections i get the error message of "connection failed" and i have the two options: "help me fix this" and  "close" after i chose the help it goes to the diagnostic tools where the connection status is "not connected" cause "service provider not found" ...then i go to the "sign-up and support" button which leads me to the mobile broadband connect window where i get the following error "no wireless mobile broadband device found" and at the background it also says mobile broadband device not found.
    I have tried to reinstall all the drivers and softwares replacing them with the latest ones which didn't have any effect on my problem.
    Also i have checked the BIOS settings or my computers wireless settings in-case something is wrong, but everything was set as it should.
    At last i have updated the BIOS to the latest one found on your site ( which is 1.32  2010/09/17) but still no change, and i am absolutely sure that the hardware device is installed correctly onto the laptops board.
    I'm attaching a capture of the sreen which contains most of the details you need to know, in case i have missed something please let me know.
    http://noob.hu/2010/11/15/Capture.JPG
    Thank you in advance.
    Best regards.
    Gergő Csorba
    B.Braun Medical Ltd.
    Moderator edit: Converted pic >50k to link per the Community Rules. Removed Gergő's mobile number so that he doesn't get an unwanted fan club texting and calling.

    Here's the Link for the 2539-AJ6, it does indicate that you have Bluetooth.  Dowload and install the latest drivers.
    http://support.lenovo.com/en_US/downloads/default.page?

  • No video capture devices were found

    I recently discovered that the iSight camera (now named FaceTime HD camera?) does not work on my recently acquired MacBook Pro Retina 15".
    I have attempted to reset the SMC, but that did not appear to solve the problem.
    Under "System Information" > Camera it simply states "No video capture devices were found".
    It also does not appear under USB as some other threads have suggested.
    When I start Photo Booth or FaceTime the camera icon with a line across is displayed, and Photo Booth also states "There is no connected camera".
    I am currently running OS X 10.8.5 (12F45).
    As far as I can tell the problem has been there since I first received the machine back in June, I simply have not had any reason to use the camera until now.
    Have anyone else run into a similar problem, or is there perhaps somewhere I could look at log files or system files or something like that to attempt to track down the cause of the problem?

    ken_guru wrote:  ... is there perhaps somewhere I could look at log files or system files or something like that to attempt to track down the cause of the problem?
    It sounds like you already have done everything you need to do.
    Because your camera is not being recognized by your "recently acquired MacBook Pro", contact Apple or the retailer who sold it to you for help.  They can tell you if your Mac needs to be repaired or exchanged for one that works properly.  Otherwise, they can show you how to use the camera. 
    Message was edited by: EZ Jim
    Mac OSX 10.9

  • HP Device Not Found Error when trying to print or scan wireless- HP Officejet Pro L7590

    Have had HP Officejet Pro L7590 All-In-One Printer for years.  Always worked fine and I had no issues printing via wireless connection.  Several months ago..  Possibly after a Windows 8 update.  From Windows 8 to Windows 8.1 I have not been able to use the printers wireless feature.  When I try to print or scan it shows the printer as offline.  Also get an error message that tells me "HP Imaging device is not found".  I can still print when connected to USB.  Cannot scan or use features of the HP software suite.  I have tried several times to correct.  Reloading the software and drivers several times, but no success.  I just tried again and was able to print the test page wireless, so got all excited and thought I fixed it.  Then tried to print something and got the same error message I have seen in the past.  I have talked to certain supports saying that it may be a firewall setting within Windows.  Any other suggestions?  Thanks

    Hi @rfjones002,
    Welcome to the HP Support Forums! I see you are not able to print or scan wirelessly to your HP Officejet L7590 and your computer running the Windows 8.1 Operating system. You get a 'Printer offline' or 'HP Imaging device not found' errors.
    I would like you to start with the steps listed below:
    Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
    Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
    Uninstall the software again - Uninstall the Printer Software Instructions
    When the uninstall has completed restart the computer
    Follow these steps to reset the registry settings and options for Windows Installer.
    Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
    In the Open box, type
    msiexec /unregister
    and then click OK.
    Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
    In the Open box, type
    msiexec /regserver
    and then click OK
    *Note: there is a space between the c and the /
    If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
    Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
    Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayerflashplaye​r/downloads.html
    Perform a clean boot > How to perform a clean boot in Windows
    Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
    Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
    - Image source
    Now you can go ahead and download and install the software here >
    HP Officejet Pro Full Feature Software and Driver
    If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    Please let me know if this was successful! I will watch for your reply.
    Thank you,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Boot Device Not Found Please Intall an Operating system on your hard disk. Hard Disk - (3F0)

    Hello,
    I tried to re-install de OS from windows 7 to windows 8.1 and when the bios update driever was installed and the laptop was restaring it appeared the folowing window and message:
    Boot Device Not Found Please Intall an Operating system on your hard disk. Hard Disk - (3F0)
    After that i tried a lot of different ways to get to boot device select ...but i couldn't do anything. I removed the HDD and i put it back, i've tried with holding in the same time windows +B and pressing the power button in the same time for 1..2 seconds and then i've waited for at least 1 minute..and it didn't appeared anything on the screen. I've done the hard drive check and it passed. The weirdest thing is that when i want to select a boot device to re-install again the OS, i can't see any boot device to select. I need to mention that i've formatted the HDD in another computer. I dont care about the informations from the HDD beacause i saved all the informations on another device storage.
    Please help me repair this problem!!!  thanks a lot!
    Have a nice evening.!!!

    Whenever you get a message stating that the boot device not found it could be because of bad sectors on the Hard Drive. Its not necessary that the Hard Drive Test should fail to determine if the Hard Drive if its faulty or not. Sometimes even if the Hard Drive Test passes the Hard Drive will still not work because of the bad sectors in it.
    Best way to find out if its the Hard Drive you can try the Hard Deive on a different Notebook which would help you determine if it's faulty or not.
    Could be due to Application or driver conflicts, virus issues, file corruptions due to incompatible applications, improper shutdowns, update failures due to conflicts, sudden power surges, if notebook is dropped etc..
    HP will provide a replacement Hard Disk Drive if the Notebook warranty is Active, If not you need buy a SATA Hard Disk Drive from a retail shop nearby
    Please make sure you are getting at least equal capacity as the original one in order to use Recovery Disks. If you need you can buy a larger, but not smaller capacity Hard Disk Drive. For example if you have a 500GB Hard Disk Drive you can upgrade it to 750GB Hard Disk Drive but not 320GB Hard Disk Drive
    Please try the below shown troubleshooting steps once:
    Step 01. Remove the battery and unplug the AC/Power Adapter
    Step 02. Press and hold the Power button for more than 30 Seconds
    Step 03. Plug in the AC/Power Adapter (leave the Battery out for now)
    Step 04. Press the Power button and check if the Unit works normal
    If the above mentioned steps does not help, then you can try reseating the Hard Drive on your Notebook
    If the issue persists again please Contact HP if your HP Notebook is under warranty, HP would replace the Hard Disk Drive and provide you a Recovery media to restore factory operating system after replacement (if you've not yet created Recovery Discs/USB Media)
    Note: Back up all the personal data to an external drive if it's possible. Otherwise you could connect the failed HDD via SATA to USB adapter with another PC or same PC after replacement of HDD & re-installation of OS and try copying /recovering the files.
    Please click on the link In order to Identify, Prevent, Diagnose & Recover from Drive Failures on HP Notebook Hard Drives & Solid State Drives :
    http://h10032.www1.hp.com/ctg/Manual/c02876562.pdf
    Please check your notebook warranty to verify the status and order a new Hard Disk Drive
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • Boot Device Not Found, Please install an operating system on your hard disk, Hard Disk (3FO)

    Hey
    i am having this Error Message "Boot Device Not Found, Please install an operating system on your hard disk, Hard Disk (3FO)", While UEFI mode is enabled from bois but in Raid menu Both my hard Drives 1TB and SSD are Showing and I run the  F2 System Diagnostics Test and it became as passed. In UEFI mode its not even showing my USB when i attach it for Window install But when i enabled the Leglacy mode it detteced my USB and also let me install my Windows and every thing seems to work fine. Updated the bios still Error is there.
    Error Message only shows up when I disable the Leglacy mode.
    So where is the Problem ? hard drive seems fine because these are working on Leglacy mode enabled.
    Laptop Model : HP Envy Dv6-7211tx
    Hard Drive : 1Tb and 32GB SSD

    Hi Saifullay, sorry to hear that you are having issue with your Envy Dv6-7211tx.  I have done some research and I have found a document that will assist you with this issues. Please click the link that I have provided to get to the document.   http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01443463  
    If this does not resolve the issue, please feel free to write back . I would like to also apologize for the delay and the inconvenience that you have had to deal with.
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • "boot device not found. please install an operating system on your hard disk error on Dm3 1030us

    Hi
    I have the following computer:
    name: hp pavilion Dm3 1030us
    serial number: {Removed for privacy}
    product number: VM073UA#ABA
    when i boot up my laptop it says "boot device not found. please install an operating system on your hard disk."
    this laptop does not have a cd drive but I do have a external one. since it does not have a cd drive therefore they didnt give me a recovery cd.
    It had Windows 7 on it.
    Is there a way to get the issue resolved

    You would have to call in to HP tech support ( 1-800-HP-INVENT) and have them order you some RCD's.
    I work for HP.
    Please click the White Kudos star on the left to say thanks.
    Please mark Accept As Solution if this resolves your issue.

  • HP G42 Notebook Windows 7 - continued to crash - now says Reboot Device not found.

    I have a HP G42 Notebook Laptop 
    Product Number - XZO46UA#ABA 
    It is a Windows 7 64 - bit PC  
     What it has been doing is Constantly Crashing and going to blue screens, and when you move the mouse to turn it on the fans ill be very loud, and at times Lap-top will get extremely hot!!  Just Yesterday it crashed and then restarted but then it went to a black screen that says (Boot Device Not Found) and i don't think that i have a Reboot Disk!! 
    And there has been absolutely no Changes made to the PC before this issue had accured. 
    If anybody can give me any information on how to Fix this problem or if i have to go to HP store or have Technition come out? 
                      >>>Thank you!<<< 

    Please close the topic:
    Suddenly the system now recognises that the monitor has a 5-touch input and the installation is running.
    Not sure what solved it:
    - Had Windows check for a frech driver (it was up-to-date)
    - Fiddled around a little in Paint just to see if 5-touch input is working
    - Activated a second display (not touchscreen)
    I then looked at the System information screen again, and the number of tocuh point appeared correctly

  • In-built Audio device not found

    Hi Guys,
    My macbook pro suddenly finds no audio device inbuilt. And i can play no sound nor hear start up sound when switching on mac.
    I get a 'no parking' like symbol beneath my audio options.
    I've tried rebooting in safe mode, Resetting PRAM, Repairing permissions in disk utilities, use my ipod touch headsets, headphones.. NOthing worked.
    And i'm feeling deaf whenever using Mac now.
    Is there anyway to get the audio back ?
    Thanks,
    Raesh

    Hmm.. Okay. Would give it a last try.
    And I have a couple question before doing that..
    1. I did the hardware test and It gave me this error .. " 4SNS/1/C0000008 :TPCD--24 "
        But When i looked up for this error, it tells me a sensor problem. Not as Audio device problem. Do you think this hardware error of 'sensor' has something to do with audio ?
    2. So in-built speaker isn't working, plugging in headphones cable isn't working. But i was wondering whether a bluetooth speaker would be recoganised in the system preferences > audio output device ? Will it work ?
    Because i keep on reading that an " in-built audio device not found " problem is a huge one and it costs a lot to repair. They often provide solution of changing the whole logic board (Keeping fingers crossed). And with my warranty period over, I don't wish to go through that path.  So want to know if external bluetooth speaker has a chance to get recoganised as an audio device, Then I would buy JBL bluetooth speakers. It seems good and less pricey than changing the whole logic board.
    Let me know which way i can go, Thanks in Advance Man.
    // Raesh.S

Maybe you are looking for