VG 202 / 204
Hi, can anyone tell me what the new VG 202 or 204 gateways are?...do they have less ports than a VG-224 and VG-248 ?
Hi Carl,
Yes, these newest Cisco Gateways offer support for 2 or 4 (VG202 and VG204 respectively) FXS Ports.
Cisco VG202 and VG204 Gateway Support in Cisco Unified Communications Manager Administration
The Cisco VG202 and VG204 Analog Voice Gateways augment the Cisco Voice Gateway portfolio along with the Cisco Integrated Series Routers (Cisco 3800,2800,1861 and VG224s). These gateways enable an IP telephony solution to continue using traditional analog devices while taking advantage of the productivity that an IP infrastructure affords.
The Cisco VG202 and VG204 comprise Cisco IOS Software-based 2-port and 4-port gateways for analog phones, fax machines, modems, and speakerphones within an enterprise voice system that is based on Cisco Unified Communications Manager and Cisco Unified Communications Manager Express.
After the Cisco VG202 and VG204 release, you can configure the gateways in Cisco Unified Communications Manager Administration.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/7_0_1/cucm-rel_notes-701.html#wp582973
Hope this helps!
Rob
Similar Messages
-
All possible alarms from Cisco VG 202, 204 and ISR G2 2900 Series Routers
Hello,
I am working on a project that involves integrating Cisco Voice Gateways and ISR G2 routers to our NetCool NMS. The project team wanted a list of all possible alarms that could be generated by these Voice Gateways and ISR 2900 series routers.
Does anyone know somewhere I can get a list of these alarms?This issue is now resolved. Removing the codec entries under DSPFarm and replacing them fixed things. I'd done this in the past so I'm not sure why it worked this time around. Anyway, here's the final config section that is allowing video sessions to operate (loudest speaker mode) between three or more video phones:
saccavgw01#sh run | s dsp
voice-service dsp-reservation 0
dspfarm
dsp services dspfarm
dspfarm profile 1 conference video homogeneous
codec g729ar8
codec g722-64
codec g711ulaw
codec h264 cif frame-rate 30 bitrate 320kbps
maximum conference-participants 8
maximum sessions 8
associate application SCCP -
Need advice on Digital Music SX warranty options.
To anyone who can help. or can PM me with any details information I expected from the customer service but none I can get?
I am without hope with Creative Labs product now. Since from SoundBlasterPro, 6 etc.... now totally disappointed.
I got a Digital Music SX on March and it dead and return for RMA at early July. And I believe I am in totally lost in this case.
Below is the e-mail to from customer support... I suspect they are not even human, which is only mail record and mail player.
=================================================
Dear Yung Ping,
I already sent back my product to Speed Digital Limited on 2-July and comes up with problemssssss I told you.
Thats why I told you my RMA number: F0007536 , pls help my case.
Anyone can help my case?
Regards
Max
> Date: Tue, 4 Aug 2009 09:3:47 +0800
> From: [email protected]
> To: [email protected]
> Subject: RE: CLA (CLHK) - Technical Support Request - (Digital Music SX) (KMM92905I5977L0KM)
>
>
>
> Dear Max,
>
> Thank you for getting back to us; sorry that the suggestions previously
> didn?t resolve your issue.
>
> If the issue still persists, you may send back the product for warranty
> servicing. Kindly contact your retailer regarding the warranty
> servicing. Alternati'vely, you may contact our authorized distributor in
> Hong Kong:
>
> Speed Digital Limited
> Address: Unit C, 3/F, Por Mee Factory Building
> 500 Castle Peak Road
> Kowloon, Hong Kong.
> Tel: (852) 2958-3
> Fax: (852) 236-5498
>
> Office Hour:
> (Mon ~ Fri) 0:00am ~ :00pm, 2:00pm ~ 6:00pm
> (Sat.) 0:00am ~ :00pm
> (Close on Sunday & Public Holiday)
>
> If you still require assistance, please reply to this email with any
> previous correspondence to ensure the quickest and most accurate
> service.
>
> Best Regards,
>
> Yun Ping
> Customer Support Advisor
> Creative Labs Asia
>
>
> Original Message Follows: ------------------------
> Yun Ping,
>
> Thanks for reply. And NO, I have been customer of Creative Labs since
> Soundblaster Pro, they all work very well and in good condition. Except
> this time the Digital Music SX.
>
>
> . I still seeing many shop are selling Digital Musix SX, and mines just
> got about 3months. Yet your online store is still selling
> it->http://hk.store.creative.com/products/product.aspx?catid=&pid=469
>
> I don't feel happy about my purchase cannot be repair or replace. I
> really looking forward CreativeLabs can REPAIR my product while it is
> still under warranty.
>
> 2. about the USB X-FI 5., the staff at service center they propose I
> accept it as replacment of my Digital Musix SX. I feel not happy about
> it too. They are totally 2 diferent target product and the X-FI is
> acturally its lots more cheapy then the SX.
>
> 3. Also from the staff at the s ervice center, they told me informed by
> CreativeLabs'staff, there is a up coming new product as upgrade of
> Digital Musix SX. Which I can get one as RMA in coming October. The
> Service center staff say they will inform me the details.
>
> 4. I have been sending the faulty Digital Music SX since 2nd July and it
> have been one month, and I still don't know and no idea when I can enjoy
> your product yet. So I expected my warranty period should not be
> counted under this RMA case. Do you think so?
>
> I am pretty much think X-FI 5. is not the one which can replace the
> Digital Musix SX in all aspects.
>
> I really hope to get more details about the status so I can make
> dicision for my RMA, I would either refund or wait for the new unknown
> replacment. And yes, I still need more details infomration.
>
> Do u understand my case? I am still waiting someone can help me out.
> Yet I do not receive any clear status on my case.
>
> Just want to get my working Digital Musix SX back. Either it is demo
> unit nor repair or anything just I need a working unit, thats all I am
> looking for.
>
>
> Also I would like to provide more details on my RMA.
>
> REPAIR SERVICE NOTE:
> RMA Reference: F0007536
> Date: 2nd July 2009
> Customer Name: Mr. Hung
> Contact Number: (852)9307-6880
> Product: Digital Musix SX
> Product Serial Number: MASB05608800054K
> Symptoms: Cannot Start Unit
> Date of Purchase: 7th March 2009
> Valid Invoice: YES
>
> Invoice No: B090307274
> Date: 7th March 2009
> Company: Centralfield Computer Ltd.
> Office: 3C, Sui Sing Bldg, 202-204 Cheung Sha Wan Rd., Sham Shui Po,
> Kln, HK.
> Tel: (852)29592283
>
>
> > Date: Mon, 3 Aug 2009 3:3:4 +0800
> > From: [email protected]
> > To: [email protected]
> > Subject: Re: CLA (CLHK) - Technical Support Request - (Digital Music
> SX) (KMM9279420I5977L0KM)
> >
> >
> >
> > Dear Max,
> >
> > Thank you for reaching us at Creative Customer Support; we appreciate
> > the opportunity to assist you.
> >
> > With regards to your enquiry, you may like to know that Digital Music
> SX
> > external soundcard has reached its end of service life and no longer
> in
> > production. You may like to view the specifications and feature of our
>
> > latest USB X-FI Surround 5. external soundcard at the following link
>
> > below:
> >
> > LINK:
> > http://hk.creative.com/products/product.asp?category=&subcategory=873&product=775& listby=
>
> >
> > You may like to know that the warranty for the replacement soundcard,
> > will continue based on your original date of purchase of your
> defecti've
> > unit, Digital Music SX.
> >
> > If you still require assistance, please reply to this email with any
> > previous correspondence to ensure the quickest and most a ccurate
> > service.
> >
> > Best Regards,
> >
> > Yun Ping
> > Customer Support Services
> > Creative Labs Asia
> >
> > To provide feedback on your "Creative Experience" please click on the
> > following link:
> > http://asia.creative.com/contactus/mailto/sitefeedback.asp
> >
> > Asia Site: http://asia.creative.com/
> > Support Site: http://asia.creative.com/support/custsup/welcomets.asp
> > KB Site: http://support.creative.com
> >
> >
> > Original Message Follows: ------------------------
> > ==================================
> > Subject: CLA (CLHK) - Technical Support Request - (Digital Music SX)
> > Name: Max Hung
> > E-mail Address: [email protected]
> > Self Description: Advanced PC User
> > Region: Asia
> > Country: Hong Kong SAR, PRC
> >
> > Support Inquiry: My Creative hardware stopped functioning correctly
> > Product: Digital Music SX
> > CCPP Certificate Number:
> > Serial Number: MASB05608800054K
> > Purchase Date: Mar/07/2009
> >
> > Operating System: Windows XP
> > Firmware Version:
> > Creative Model Number: Digital Music SX
> > Connected To:
> >
> >
> > Detailed Problem Description:
> > my product was return for RMA since 2nd July 2009. Now the serv ice
> > center told me the product is no longer available and suggest me to
> > accept a X-Fi Surround 5. sound card or wait until OCT for an unknown
>
> > new product which claim for upgrade for Digital Music SX. Please, I
> need
> > more details on my RMA. Since the server center told me my product
> > cannot be fixed or replaced, I need to know how will my product
> warranty
> > goes. Thanks for help.
> >
> >
> > ==================================?. I will not be able to tell you if the Digital Music is available for repair or not. I am sorry but this is not something I have control over. Parts and support policies differs country to country, in your case you will need to work things out with the distributor.
Message Edited by KokChoy-CL on <span class='local-date'> 08-04-2009<span class='local-time'> 05:8 [email protected] -
Pass Url Parameter To Portlet in a Tab Page
Ciao,
i have a portal page with TABS. I have pl/sql portlets that read the url, then they pass parameters to the url. With "wwpro_api_parameters.get_value" and the session i am able to pass parameters via URL and to know if i have changed tab or not.
My question is: how cai i "CLEAN" the url if i change the tab? As you know, if i change tab, only the "_pageid" parameter change, and not the whole url.
i.e.: http://misun13:7777/servlet/page?_pageid=202,204,217&_dad=portal30&_schema=PORTAL30&par_name=5
I change the tab: http://misun13:7777/servlet/page?_pageid=202,206,217&_dad=portal30&_schema=PORTAL30&par_name=5
But i want to RESET the parameters! That is i want: http://misun13:7777/servlet/page?_pageid=202,206,217&_dad=portal30&_schema=PORTAL30
It seems i can't change the standard behaviour of the TAB.
Does anybody know how to do that?
Thanks in advance,
EttoreHi Ettore,
It is true that when you pass parameters, they show up on the URL and even when you change tabs the messy long URL will show up.
One way to avoid this, is to use the session store instead and save and access the parameter values from the session storage itself.
For more details on using Session Storage, check the PDK documentation for using the session store.
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/articles/implementing.session.storage.html
Another thing, you may try is using the owa_utl.redirect to specifically redirect to a clean URL. But i suspect that if your parameter values are still active, they will populate the URL in any case.
For further details on parameter passing, check:
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/articles/guidelines.parameter.passing.html
Hope this helps.
Mohana -
.kar (karaoke) files won't display text
I'm trying to play .kar (karaoke) files in Quicktime (version 10.1). The music plays, but the text track doesn't display. When I look at the "Movie Properties," it clearly shows there is a "Music Track" and a "Text Track." Any suggestions?
Here's a site I just downloaded a file from that worked fine: http://www.nifter.com/midi_karaoke_songs_free_downloads.htm Specifically, I tried the "Blackbird" file.
Here is the descriptor text track for the working file:
{QTtext}{font:Geneva}{plain}{continuousKaraoke:on}{textColorHilite:on}{size:12}{ textColor: 65535, 65535, 65535}{backColor: 0, 0, 0}{justify:center}{timeScale:1000}{width:300}{height:144}{timeStamps:absolute}{ language:0}{textEncoding:0}
[00:00:00.000]
Blackbird
By The Beatles
[00:00:04.375]
{textBox: 0, 0, 80, 300}{karaoke: 28; 0, 0, 0; 314, 0, 5; 625, 5, 9; 939, 10, 17; 1094, 18, 20; 1250, 21, 24; 1875, 25, 32; 4375, 33, 38; 4689, 38, 43; 5000, 44, 49; 5625, 50, 56; 5939, 57, 62; 6564, 63, 72; 6719, 73, 75; 9375, 76, 79; 9689, 79, 83; 10000, 84, 88; 12814, 89, 93; 13439, 94, 98; 13750, 99, 103; 14219, 104, 108; 14689, 109, 116; 15000, 117, 121; 15469, 122, 126; 16250, 127, 133; 16407, 134, 136; 16875, 137, 138; 22814, 138, 142;}Blackbird singing in the dead of night
Take these broken wings and learn to fly
All your life
You were only waiting
For this moment to arise
[00:00:27.189]
{textBox: 0, 0, 80, 300}{karaoke: 29; 0, 0, 0; 312, 0, 5; 625, 5, 9; 937, 10, 17; 1250, 18, 20; 1405, 21, 24; 1719, 25, 29; 2187, 30, 32; 4687, 33, 38; 5312, 38, 49; 5937, 51, 57; 6250, 58, 62; 6875, 63, 73; 9687, 74, 81; 10000, 81, 85; 10312, 86, 90; 13437, 91, 95; 13750, 96, 100; 14062, 101, 105; 14219, 106, 108; 15000, 108, 110; 15312, 111, 118; 15469, 119, 123; 15780, 124, 128; 15937, 129, 131; 16562, 131, 135; 16719, 136, 138; 17187, 139, 141; 18437, 142, 146;}Blackbird singing in the dead of night
Take these sunken eyes and learn to see
All your life
You were only waiting
For this moment to be free
[00:00:45.625]
{textBox: 0, 0, 48, 300}{karaoke: 15; 0, 0, 0; 625, 0, 5; 2189, 5, 9; 5000, 10, 13; 5625, 13, 19; 6875, 19, 23; 9219, 24, 27; 9532, 27, 33; 9689, 34, 37; 10314, 38, 43; 10469, 44, 46; 10939, 48, 49; 11094, 50, 54; 11250, 55, 60; 30000, 61, 66;}Blackbird fly
Blackbird fly
In to the light of a dark black night
[00:01:15.625]
{textBox: 0, 0, 80, 300}{karaoke: 31; 0, 0, 0; 314, 0, 5; 625, 5, 9; 782, 10, 14; 939, 14, 17; 1250, 18, 24; 1407, 25, 29; 1875, 30, 32; 4375, 33, 38; 4689, 38, 43; 5000, 44, 49; 5314, 50, 56; 5939, 57, 62; 6564, 63, 72; 6719, 73, 75; 9375, 76, 79; 9689, 79, 83; 10000, 84, 88; 13125, 89, 93; 13439, 94, 98; 13750, 99, 103; 14064, 104, 106; 14375, 106, 108; 14689, 109, 113; 15000, 113, 116; 15469, 117, 126; 15625, 127, 129; 16250, 129, 133; 16564, 134, 136; 16875, 137, 139; 18125, 140, 144;}Blackbird singing in the dead of night
Take these broken wings and learn to fly
All your life
You were only waiting
For this moment to be free
[00:01:33.750]
{textBox: 0, 0, 48, 300}{karaoke: 16; 0, 0, 0; 625, 0, 5; 1250, 5, 9; 5000, 10, 13; 5625, 14, 20; 7189, 20, 24; 9064, 25, 28; 9219, 28, 31; 9532, 32, 34; 9689, 35, 38; 10469, 39, 44; 10625, 45, 47; 10782, 48, 49; 10939, 50, 54; 11250, 55, 60; 23125, 61, 66;}Blackbird fly
Blackbird fly
In to the light of a dark black night
[00:01:56.875]
{karaoke: 58; 0, 0, 0; 314, 0, 5; 625, 5, 9; 939, 10, 17; 1094, 18, 20; 1250, 21, 24; 1407, 25, 29; 1875, 30, 32; 4375, 33, 38; 4532, 38, 43; 5000, 44, 49; 5314, 50, 56; 5625, 57, 62; 5939, 63, 66; 6250, 67, 72; 6719, 73, 75; 9375, 76, 79; 9689, 79, 83; 10314, 84, 88; 12814, 89, 93; 13125, 94, 98; 13439, 99, 103; 13594, 104, 106; 14064, 106, 108; 14375, 109, 113; 14844, 113, 116; 15000, 117, 121; 15314, 122, 126; 15625, 127, 129; 16094, 129, 133; 16250, 134, 136; 16719, 137, 138; 17814, 138, 142; 18125, 142, 146; 18439, 147, 151; 18750, 152, 154; 19375, 154, 156; 19844, 157, 164; 20000, 165, 169; 20314, 170, 174; 20469, 175, 177; 20939, 177, 181; 21250, 182, 184; 21875, 185, 187; 23125, 188, 192; 23439, 192, 196; 23750, 197, 201; 24064, 202, 204; 24219, 204, 206; 24375, 207, 211; 24844, 211, 214; 25000, 215, 219; 25157, 220, 224; 25314, 225, 227; 26094, 227, 231; 26250, 232, 234; 26875, 235, 237; 28125, 238, 242;}Blackbird singing in the dead of night
Take these broken wings and learn to fly
All your life
You were only waiting
For this moment to arise
You were only waiting
For this moment to be free
You were only waiting
For this moment to be free
[00:02:25.000]
And this is the site where I got the Mikado files: http://www.intronvaria.com/waihekechoral/Mikado/Mikado_index.html. Scroll down and you'll see, after the regular MIDI files, a set of Karaoke (.kar) files.
And here is the descriptor text track for the non-working file:
{QTtext}{font:Times}{plain}{size:18}{textColor: 0, 0, 0}{backColor: 0, 0, 0}{justify:center}{timeScale:1000}{width:300}{height:0}{timeStamps:absolute}{la nguage:0}{textEncoding:0}
[00:00:00.000]
[00:02:52.572]
While the difference between 3 bytes of data (for the non-working file) and approximately 2280 bytes of data (for the working file) may be considered relativerly small, as you can see, it is enough to make a difference between an empty, non-working lyrics track and a working one. Obviously, your original non-working download contains no lyrics to be displayed. -
Operationsmanager database is consuming lot of space
Hi All,
I have a issue, My operations manager database is of 40GB and out of which 19 GB was always free.
From the past 1 - 2 weeks my database is occupying lot of space and currently i have only 9GB free.
When i ran a SQL query to pull what data of what is consuming lot of space below is the report.
SQL Query what i used:
SELECT so.name,
8 * Sum(CASE WHEN si.indid IN (0, 1) THEN si.reserved END) AS data_kb,
Coalesce(8 * Sum(CASE WHEN si.indid NOT IN (0, 1, 255) THEN si.reserved END), 0) AS index_kb,
Coalesce(8 * Sum(CASE WHEN si.indid IN (255) THEN si.reserved END), 0) AS blob_kb
FROM dbo.sysobjects AS so JOIN dbo.sysindexes AS si ON (si.id = so.id)
WHERE 'U' = so.type GROUP BY so.name ORDER BY data_kb DESC
Output:
Last 5 days back the report (When the space came to 12GB)
name
data_kb
index_kb
StateChangeEvent
7347832
753376
PerformanceSource
4001200
1783192
PerformanceData_40
2310000
671704
PerformanceData_38
2240256
648800
PerformanceData_42
2063936
596704
AlertHistory
1412752
177984
PerformanceData_36
1390320
406616
Alert
1369984
162984
PerformanceData_44
764976
224600
RecursiveMembership
482152
176856
Event_40
420400
5912
Event_42
313984
4320
Event_36
290688
4000
Event_38
289600
3808
Event_34
252976
3352
In last 3 days the new report (Currently when the space came to 9GB)
name
data_kb
index_kb
blob_kb
StateChangeEvent
7417272
764896
0
PerformanceSource
4009712
1786904
0
PerformanceData_46
3626432
1042144
0
PerformanceData_40
2310000
671704
0
PerformanceData_38
2240256
648800
0
PerformanceData_42
2063936
596704
0
PerformanceData_44
1873840
548888
0
AlertHistory
1468880
182208
0
Alert
1399576
152832
0
Event_46
526832
6936
0
RecursiveMembership
482728
177240
0
Event_40
420400
5912
0
Event_42
313984
4320
0
Event_44
306608
4184
0
Event_36
290688
4000
0
My Current grooming settings for Operationsmanager DB are as below.
Can any one help me in how do i reduce this space occupation please ?
Gautam.758011) You may refer to the following SQL statement to find out the lare table query of operations Manager Database and Operations manager DataWarehouse.
SELECT TOP 1000
a2.name AS [tablename], (a1.reserved + ISNULL(a4.reserved,0))* 8 AS reserved,
a1.rows as row_count, a1.data * 8 AS data,
(CASE WHEN (a1.used + ISNULL(a4.used,0)) > a1.data THEN (a1.used + ISNULL(a4.used,0)) - a1.data ELSE 0 END) * 8 AS index_size,
(CASE WHEN (a1.reserved + ISNULL(a4.reserved,0)) > a1.used THEN (a1.reserved + ISNULL(a4.reserved,0)) - a1.used ELSE 0 END) * 8 AS unused,
(row_number() over(order by (a1.reserved + ISNULL(a4.reserved,0)) desc))%2 as l1,
a3.name AS [schemaname]
FROM (SELECT ps.object_id, SUM (CASE WHEN (ps.index_id < 2) THEN row_count ELSE 0 END) AS [rows],
SUM (ps.reserved_page_count) AS reserved,
SUM (CASE WHEN (ps.index_id < 2) THEN (ps.in_row_data_page_count + ps.lob_used_page_count + ps.row_overflow_used_page_count)
ELSE (ps.lob_used_page_count + ps.row_overflow_used_page_count) END ) AS data,
SUM (ps.used_page_count) AS used
FROM sys.dm_db_partition_stats ps
GROUP BY ps.object_id) AS a1
LEFT OUTER JOIN (SELECT it.parent_id,
SUM(ps.reserved_page_count) AS reserved,
SUM(ps.used_page_count) AS used
FROM sys.dm_db_partition_stats ps
INNER JOIN sys.internal_tables it ON (it.object_id = ps.object_id)
WHERE it.internal_type IN (202,204)
GROUP BY it.parent_id) AS a4 ON (a4.parent_id = a1.object_id)
INNER JOIN sys.all_objects a2 ON ( a1.object_id = a2.object_id )
INNER JOIN sys.schemas a3 ON (a2.schema_id = a3.schema_id)
WHERE a2.type <> N'S' and a2.type <> N'IT'
2) Moreover, your query return that the suddndly increase of DB siza came from performance data and you may use the following queryto find out which rule generated a hugh mount of performance data.
select r.rulename, count(*) from performancedataallview pv
inner join performancesource ps on pv.performancesourceinternalid=ps.performancesourceinternalid
inner join rules r on r.ruleid=ps.ruleid
group by r.rulename
order by count(*) desc
http://blogs.technet.com/b/kevinholman/archive/2007/10/18/useful-operations-manager-2007-sql-queries.aspx
Roger -
hi
we got our DB's on SQL server2012 entriprise edition,recently i have ran rebuild index maintenance plan for a DB which is around 350GB as this was taking loads of time and consuming lots of disk space i have killed the process in the middle.As this
plan was taking loads of time to roll back i have restarted the services and then DB went to INRECOVERY and has taken much time to come back to normal online mode. when i have checked the log after recovery it was showing DB has been recovered with 1 transaction
roll back and iam assuming that is rebuild. After this i have shrinked both LDF and MDF and everthing working fine,But i can see decrease in the SPACEUSED in MDF by 12GB could please some one help me to know the reason for this sudden decrease.
with regards,
Ramhi
If iam not wrong shrinking MDF will release it's existing free space to hard disk right,how come the space used for MDF file decreased.
for reference i was using below query to calculate the growth of DB by seeing space used
if exists (select * from tempdb.sys.all_objects where name like '%#dbsize%')
drop table #dbsize
create table #dbsize
(Dbname sysname,dbstatus varchar(50),Recovery_Model varchar(40) default ('NA'), file_Size_MB decimal(30,2)default (0),Space_Used_MB decimal(30,2)default (0),Free_Space_MB decimal(30,2) default (0))
go
insert into #dbsize(Dbname,dbstatus,Recovery_Model,file_Size_MB,Space_Used_MB,Free_Space_MB)
exec sp_msforeachdb
'use [?];
select DB_NAME() AS DbName,
CONVERT(varchar(20),DatabasePropertyEx(''?'',''Status'')) ,
CONVERT(varchar(20),DatabasePropertyEx(''?'',''Recovery'')),
sum(size)/128.0 AS File_Size_MB,
sum(CAST(FILEPROPERTY(name, ''SpaceUsed'') AS INT))/128.0 as Space_Used_MB,
SUM( size)/128.0 - sum(CAST(FILEPROPERTY(name,''SpaceUsed'') AS INT))/128.0 AS Free_Space_MB
from sys.database_files where type=0 group by type'
go
-------------------log size--------------------------------------
if exists (select * from tempdb.sys.all_objects where name like '#logsize%')
drop table #logsize
create table #logsize
(Dbname sysname, Log_File_Size_MB decimal(38,2)default (0),log_Space_Used_MB decimal(30,2)default (0),log_Free_Space_MB decimal(30,2)default (0))
go
insert into #logsize(Dbname,Log_File_Size_MB,log_Space_Used_MB,log_Free_Space_MB)
exec sp_msforeachdb
'use [?];
select DB_NAME() AS DbName,
sum(size)/128.0 AS Log_File_Size_MB,
sum(CAST(FILEPROPERTY(name, ''SpaceUsed'') AS INT))/128.0 as log_Space_Used_MB,
SUM( size)/128.0 - sum(CAST(FILEPROPERTY(name,''SpaceUsed'') AS INT))/128.0 AS log_Free_Space_MB
from sys.database_files where type=1 group by type'
go
--------------------------------database free size
if exists (select * from tempdb.sys.all_objects where name like '%#dbfreesize%')
drop table #dbfreesize
create table #dbfreesize
(name sysname,
database_size varchar(50),
Freespace varchar(50)default (0.00))
insert into #dbfreesize(name,database_size,Freespace)
exec sp_msforeachdb
'use [?];SELECT database_name = db_name()
,database_size = ltrim(str((convert(DECIMAL(15, 2), dbsize) + convert(DECIMAL(15, 2), logsize)) * 8192 / 1048576, 15, 2) + ''MB'')
,''unallocated space'' = ltrim(str((
CASE
WHEN dbsize >= reservedpages
THEN (convert(DECIMAL(15, 2), dbsize) - convert(DECIMAL(15, 2), reservedpages)) * 8192 / 1048576
ELSE 0
END
), 15, 2) + '' MB'')
FROM (
SELECT dbsize = sum(convert(BIGINT, CASE
WHEN type = 0
THEN size
ELSE 0
END))
,logsize = sum(convert(BIGINT, CASE
WHEN type <> 0
THEN size
ELSE 0
END))
FROM sys.database_files
) AS files
SELECT reservedpages = sum(a.total_pages)
,usedpages = sum(a.used_pages)
,pages = sum(CASE
WHEN it.internal_type IN (
202
,204
,211
,212
,213
,214
,215
,216
THEN 0
WHEN a.type <> 1
THEN a.used_pages
WHEN p.index_id < 2
THEN a.data_pages
ELSE 0
END)
FROM sys.partitions p
INNER JOIN sys.allocation_units a
ON p.partition_id = a.container_id
LEFT JOIN sys.internal_tables it
ON p.object_id = it.object_id
) AS partitions'
if exists (select * from tempdb.sys.all_objects where name like '%#alldbstate%')
drop table #alldbstate
create table #alldbstate
(dbname sysname,
DBstatus varchar(55),
R_model Varchar(30))
--select * from sys.master_files
insert into #alldbstate (dbname,DBstatus,R_model)
select name,CONVERT(varchar(20),DATABASEPROPERTYEX(name,'status')),recovery_model_desc from sys.databases
--select * from #dbsize
insert into #dbsize(Dbname,dbstatus,Recovery_Model)
select dbname,dbstatus,R_model from #alldbstate where DBstatus <> 'online'
insert into #logsize(Dbname)
select dbname from #alldbstate where DBstatus <> 'online'
insert into #dbfreesize(name)
select dbname from #alldbstate where DBstatus <> 'online'
select
d.Dbname,d.dbstatus,d.Recovery_Model,
(file_size_mb + log_file_size_mb) as DBsize,
d.file_Size_MB,d.Space_Used_MB,d.Free_Space_MB,
l.Log_File_Size_MB,log_Space_Used_MB,l.log_Free_Space_MB,fs.Freespace as DB_Freespace
from #dbsize d join #logsize l
on d.Dbname=l.Dbname join #dbfreesize fs
on d.Dbname=fs.name
order by Dbname -
i am using -
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
i have the following input data-
id name parentid
======================================
100 a
101 b 100
102 c 102
tree look like-
100 101
100 102
d name parentid
======================================
200 d
201 d1 200
202 d2 200
203 d21 202
204 d212 203
tree look like-
200 201
200 202 203 204
i want to convert it into---
id name parentid level
=================================================
100 a - 1
101 b 100 2
102 c 100 2
200 d - 1
201 d1 200 2
202 d2 200 2
203 d21 202 3
204 d212 203 4Unless I am missing something here, but it is plain hierarchical query:
SQL> with sample_table as (
2 select 100 id,'a' name,null parentid from dual union all
3 select 101,'b',100 from dual union all
4 select 102,'c',100 from dual
5 )
6 select id,
7 name,
8 parentid,
9 level
10 from sample_table
11 start with parentid is null
12 connect by parentid = prior id
13 /
ID NAME PARENTID LEVEL
100 a 1
101 b 100 2
102 c 100 2
SQL> with sample_table as (
2 select 200 id,'d' name,null parentid from dual union all
3 select 201,'d1',200 from dual union all
4 select 202,'d2',200 from dual union all
5 select 203,'d21',202 from dual union all
6 select 204,'d212',203 from dual
7 )
8 select id,
9 name,
10 parentid,
11 level
12 from sample_table
13 start with parentid is null
14 connect by parentid = prior id
15 /
ID NAME PARENTID LEVEL
200 d 1
201 d1 200 2
202 d2 200 2
203 d21 202 3
204 d212 203 4
SQL> SY. -
We just upgraded the CallManager and new voips. I have noticed that we are running out of ip's. We setup a second pool, but are unable to register any phones on the new/different vlan (453). What am I missing?
The config on NTP/DHCP server is as follows:
Ip dhcp smart-relay
No ip dhcp use vrf connected
Ip dhcp excluded-address xxx.xx.253.129 xxx.xx.253.135
Ip dhcp excluded-address xxx.xx.253.248 xxx.xx.253.254
Ip dhcp excluded-address xxx.xx.253.65 xxx.xx.253.69 (new to config)
Ip dhcp pool VOIP
Network xxx.xx.253.128 xxx.xxx.xxx.128
Next-server xxx.xx.253.131
Default-router xxx.xx.253.130
Option 150 ip xxx.xx.253.131
Ip dhcp pool VOIP2 (new to config)
Network xxx.xx.253.64 xxx.xxx.xxx.192 (new to config)
Next-server xxx.xx.253.131 (new to config)
Default-router xxx.xx.253.65 (new to config)
Option 150 ip xxx.xx.253.131 (new to config)sh ip dhcp bind on dhcp server x.x.253.132
Bindings from all pools not associated with VRF:
ips listed, mac address, lease times; all today the 19th or tomorrow the 20th, type; all automatic
x.x.253.136
.138
.140
.142
.143
.144
.146
.148
.149
.151-.157
.159-.166
.168-.188
.190
.193
.194
.196
.198
.199
.202-.204
.208
.213
.214-.216
.218
.219
.221-.231
.244
.249
.250
.251
.252 -
A project that I'm working on requires being able to dynamically create sound-asset SWF files (using DefineSound tags). Even though I've been able to successfully create DefineSound tags using raw pcm, I haven't been able to do so with Speex.
The SWF format spec (pgs 202-204) specifies that you can use Speex in a DefineSound tag, but its fairly vague about the specifics. Is it just the output of speex_bits_write with no framing? Is it the same as the output of speexenc (e.g., an Ogg file)? Is it a series of frames with a length before each one? I've tried variations of all these and none of them work.
CS4 can be used to create sound-asset SWFs, which is useful for having a real-world example. The problem is, the GUI only allows for some encodings (MP3, Nellymoser, raw, etc), but not Speex.
So, my question is: has anyone done this? Can you point me to a reference implementation or an example Speex SWF?Have just the same question. I can't find a way how to use Speex in SWF. SWF file format 10 declares it, but it's not clear how to do it. CS4 can't do it. As I beleave this feature (as well as 16 kHz NellyMoser and 8 kHz MP3) are only declared and maybe they are supported by Flash Player, but they are not supported by Flash authoring tools yet.
It would be great to hear any news on this front! -
Hi all,
query has to show the values of keyfigures with above 200(201,202.....) as 200.
for example
james 200
willy 180
Jhones 450
kiris 204 and so on.
the values above 200 that is 450 204 has 200 in the query output.
Thanks,
JamesHi ganesh,
Thanks for response.
but assumption is wrong.
the values below 200 also needed and the values above 200(400,204) has to show 200 in the output of the report.
format before the output of the query.
james 400
kitty 200
jhones 180
francy 204.
Now my output has to show
james 200
kitty 200
jhones 180
francy 200.
I hope you can understand better now.
Thanks,
James -
In our enterprise MPLS network we are using 192.168.20.0/24 subnet, in this subnet we have not assigned the IP 192.168.20.200/30 & 204/30, But still these subnets are reachable . Are these NNI IP ...Please explain.
I have checked with ISP, there response is like below:
Those are the NNI to GBNET IPs for Dominican Republic. They are Network IPs. You should be able to ping them-that means they are working.
WANRT01#show ip route | include 192.168.20.20
B 192.168.20.200/30 [20/0] via 192.168.20.226, 02:18:29
B 192.168.20.204/30 [20/0] via 192.168.20.226, 02:18:29
Here its shows from any of our MPLS site we are able to trace the IP and it seems like, 192.168.20.204/30 is one more site but in actual its not.
INMUMWANRT01#ping 192.168.20.205
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.20.205, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 224/232/260 ms
INMUMWANRT01#trace
INMUMWANRT01#traceroute 192.168.20.205
Type escape sequence to abort.
Tracing the route to 192.168.20.205
VRF info: (vrf in name/id, vrf out name/id)
1 192.168.20.226 24 msec 24 msec 24 msec
2 192.168.20.206 [AS 8035] 232 msec 232 msec 252 msec
3 192.168.20.205 [AS 8035] 224 msec 224 msec * -
NFE Produção - Código Status 204 Rejeição
Olá, Boa tarde!
Estamos com uma NFE da Produção parada, pois não estamos conseguindo atualizar o status dela.
No monitor de GRC a NFE aparece da seguinte forma:
Status NFE (bolinha vermelha): 05 resultado recebido
Status de Erro: 90 erro de sistema PI
Código Status: 204 Rejeição: Duplicidade NFE
A opção "Consulta do Status" está disponível, porém já tentamos várias vezes, aparece a mensagem: O processo de consulta status NFE foi inicializado. Atualizar a exibição NFE.
Atualizamos a página, porém não muda nenhum status.
No monitor J1BNFE a NFE está aguardando o retorno do GRC.
Não sei se tem algo a ver, mas recentemente fizemos a atualização da Versão para 2.0.
Antes o procedimento funcionava normal... agora as NFES estão paradas...
Aguardo comentários.
Obrigada.
AdrianaBom dia,
Estou com esse mesmo erro, e não sei como resolver...
Ao clicar em consultar status(Monitor GRC) da NFE em questão, o status não é atualizado(consultamos no SEFAZ e a NFe Está aprovada)..
Verifiquei as msg na MONI e temos uma com o ACK NEG, porém desconheço o erro...segue os xml que consegui verificar na mensagem:
XML INBOUND:
<?xml version="1.0" encoding="utf-8" ?>
- <n0:nfeConsultaNF2 xmlns:n0="http://sap.com/xi/NFE/006" xmlns:prx="urn:sap.com:proxy:PIP:/1SAI/TASB4840BC26BF382F75BE8:700:2009/02/10" xmlns:n1="http://www.portalfiscal.inf.br/nfe">
<n0:cUF>41</n0:cUF>
<n0:tpEmis>1</n0:tpEmis>
<n0:tpAmb>1</n0:tpAmb>
<n0:type>1</n0:type>
<n0:versNum>001</n0:versNum>
<n0:mode>I</n0:mode>
- <n0:nfeDadosMsg>
- <n1:consSitNFe versao="2.00">
<n1:tpAmb>1</n1:tpAmb>
<n1:xServ>CONSULTAR</n1:xServ>
<n1:chNFe>41110300606549000124550000000231711903353574</n1:chNFe>
</n1:consSitNFe>
</n0:nfeDadosMsg>
</n0:nfeConsultaNF2>
XML RESPONSE:
<?xml version="1.0" encoding="utf-8" ?>
- <n0:nfeConsultaNF2 xmlns:n0="http://sap.com/xi/NFE/006" xmlns:prx="urn:sap.com:proxy:PIP:/1SAI/TASB4840BC26BF382F75BE8:700:2009/02/10" xmlns:n1="http://www.portalfiscal.inf.br/nfe">
<n0:cUF>41</n0:cUF>
<n0:tpEmis>1</n0:tpEmis>
<n0:tpAmb>1</n0:tpAmb>
<n0:type>1</n0:type>
<n0:versNum>001</n0:versNum>
<n0:mode>I</n0:mode>
- <n0:nfeDadosMsg>
- <n1:consSitNFe versao="2.00">
<n1:tpAmb>1</n1:tpAmb>
<n1:xServ>CONSULTAR</n1:xServ>
<n1:chNFe>41110300606549000124550000000231711903353574</n1:chNFe>
</n1:consSitNFe>
</n0:nfeDadosMsg>
</n0:nfeConsultaNF2>
XML ACK ERROR:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Response
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">NEGATIVE_ACKNOWLEDGEMENT</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Negative acknowledgment triggered by a process</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Alguém teria alguma dica?
Edited by: João Luis da Silva Dovigo on Mar 16, 2011 6:20 PM -
Bom dia!
Estou a 3 dias com uma NFe de tranferência parada ( engrenagem ) relacioanda ao erro 204 "Rejeicao: Duplicidade de NF-e [nRec:310001601853941]' e não consegui libera-la.
Abri uma OSS, e depois de muito tempo me retornaram para realizar as instruções abaixo mas não encontrei resultado.
Estamos na NFe 3.10 e não encontrei mais o botão "STATUS QUERY".
Tentei o botão "continuar processo" mas nada. "Outra funções" e nada.
In order to solve this issue you'll have to manually adjust some
fields in table /XNFE/OUTNFEHD.
Table: /XNFE/OUTNFEHD
ACTSTAT from 11 to 02
LAST STEP STATUS From 11 to 02
Then go to NF-e web monitor and push the "STATUS QUERY". It should
solve this NF-e issue.
Retornei a dúvida para a OSS mas nada de resposta.
Conseguimos liberar a mercadoria de nossa planta em MG emitindo uma DANFE pela SEFAZ, pois esta já foi autorizada, mas agora a mercadoria chegou em nossa planta de produção em SP em não conseguimos dar entrada.
Alguém poderia nos ajudar?
Grato.Bom dia Clayton
Na empresa que trabalho, o que fizemos é:
No Monitor de Saída do GRC, selecionamos a NFe com problema, vamos no menu "Outras funções - Solicitar Verificação de Status".
No momento da solicitação a comunicação com o SEFAZ deve estar ativa.
Verifique se o LOTE está concluído, caso não esteja, reinicie o LOTE.
Outra opção é você verificar a Chave de Acesso da NFe no SEFAZ, se a NFe está aprovada, caso esteja, você pode ir no menu "Outras funções - Encerrar Ignorar" o sistema irá pedir algumas informações como "Protocolo de autorização".
O nosso amigo Renan Correa postou uma ótima ajuda, conforme segue o link abaixo:
Como lidar com os erros mais comuns a partir dos novos monitores de NF-e
Qualquer coisa avise.
Abraço. -
NF-e 3.10 - Erro 204 - Duplicidade - Botão consulta status
Boa tarde a todos.
Estamos em fase de testes do projeto de implementação do XML 3.10.
Eu tive algumas notas no meu ambiente de teste integrado com rejeição 204 (duplicidade de nota).
Eu preciso realizar a consulta de status para essas notas, porém no botão Outras Funções, não aparece a opção Verificar Status (conhecido como Consulta de Status no monitor 2.00).
Eu encontrei o seguinte post relacionado ao meu problema:
NFe V3.10 Erro 204 - Duplicidade - Botão Consulta Status sumiu
Porém, o procedimento de "Continuar Processo" descrito no post acima não resolveu meu problema (quando dou um Continuar Processo, o GRC tenta enviar novamente a nota para aprovação).
Alguém sabe como faço para o botão de consulta de status aparecer? Seria algo de perfil?
Att,
Matheus GoulartEntão Ricardo, na verdade não tem botão de consulta de status no detalhe.
Acebei de descobrir que o Continuar Processo funcionou, o problema é que a consulta de status foi rejeitada pela SEFAZ (sefaz MG).
E o motivo que no monitor não atualizou os status das notas, é porque deu um erro no proxy inbound.
Mensagem da SPROXY:
Falta elem.'{http://www.portalfiscal.inf.br/nfe}dhRecbto'
XML (retorno):
<?xml version="1.0" encoding="utf-8" ?>
- <nfeConsultaNFResponse xmlns="http://sap.com/xi/NFE/008">
- <nfeConsultaNF2Result>
- <retConsSitNFe xmlns="http://www.portalfiscal.inf.br/nfe" versao="3.10">
<tpAmb>2</tpAmb>
<verAplic>13_2_28</verAplic>
<cStat>217</cStat>
<xMotivo>Rejeicao: NF-e nao consta na base de dados da SEFAZ</xMotivo>
<cUF>31</cUF>
<chNFe>31140940432544011262550160000014241463324953</chNFe>
</retConsSitNFe>
</nfeConsultaNF2Result>
<n0:mode xmlns:n0="http://sap.com/xi/NFE/008">O1</n0:mode>
</nfeConsultaNFResponse>
Maybe you are looking for
-
This is my first attempt at building a web site and am obviously in way over my head. I am using Dreamweaver MX2004 and started the site with one of the CSS templates included in the program. I am using the 2 column left navigation one. The question
-
Hello, I have a question about the floppy disk. How can I mount the floppy disk? Which device under the /dev directory represents the floppy disk, /dev/fd0 or /dev/diskette or /dev/diskette0? How can I mount the floppy disk manually? I think the flop
-
Adobe reader 9.5.3 problem
My adobe reader is corrupted. It will not update delete, or repair. How can I fix this?
-
Imail: how do I not leave e-mail on server
I am new to the imail system. I have opened my two e-mail pop accounts on imail. I want to download my e-mail on accounts without leaving copies of the mail on the servers. (this was atuomatic on mu old outlook) What do I do to accomplish this. thank
-
After upgrade ZCM 10.3.4, DB grow very fast
HI All I had test ZCM 10.3.4 in my lab, and it seem no critical problem.then I upgrade it on my customer production environment. When I upgrade ZCM completed...the DB and trans log size upgrade from 70G/2G to 102G/165G in 2 days....it is every terrib