VGA adapter crashing my 17" Macbook Pro

Hello,
With some models of Dell projector, I find that connecting the projector's VGA cable to my new 17" Macbook Pro wedges the entire machine, pretty much instantly. Sometimes the projectors start buzzing afterwards as well.
I've tried two different DisplayPort->VGA adaptors, to no avail.
It's very bad when you walk into meetings and can't project with an Apple, but the PCs work fine!
Does anyone have any advice - is this a known issue?

I have same issue with 15" MBP (late 2008). Very embarrassing. Solutions:
1. Get to meetings 15 minutes early. I have been doing this for months. System always crashes, reboots, and VGA works. I give my PPT then leave.
2. Try a USB to VGA device. I am shopping for one now.
3. Go back to Windows.

Similar Messages

  • Will a Mini-Displayport to VGA adapter work with new macbook pro 2011

    I was thinking of getting a mini-displayport to vga adapter for my external monitor I wanted to hook up but I wasnt quite sure whether it would work as my macbook pro has the new thunderbolt port, I was confused if the new port would only work with the thunderbolt displays. Could anyone help me as I'm not too sure what will work.

    I tried the Apple miniDisplayport to VGA in a Thunderbolt MBP and iMac and they both worked. Same for the Apple miniDIsplayport to DVI.

  • Can I use a mini display port to VGA adapter and then a VGA to av adapter to connect my MacBook pro to my standard definition tv?

    Can I use a mini display port to VGA adapter and then a VGA to av adapter to connect my MacBook pro to my standard definition tv?

    No. You need a converter box like this to go with your MDP-VGA adapter:
    http://www.amazon.com/PC-To-TV-Video-Converter/dp/B001CJOLBW/ref=pd_cp_e_2

  • HT3382 I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    I have a Samsung VGA Monitor connected to my MacBook Pro using the Mini Display Port to VGA Adapter.  How do I configure the computer so that it doesn't sleep when I close the lid of the computer.

    Hi alangium,
    Welcome to the Support Communities!
    Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    This article may provide some information about your Mini DisplayPort to AVI adapter.  Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    http://support.apple.com/kb/HT3382
    18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
    The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573#5
    How can I detect displays?
    If the detect displays option is not available, hold down the Option key while you are in the Display pane.
    How do I select additional resolutions on my display?
    You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
    To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
    I hope this information helps ....
    - Judy

  • External VGA Projector Screen Blue when MacBook Pro Connected

    I love using my laptop for Powerpoint and Keynote presentations at work. I used to have a Powerbook 1.5GHz 15" and now have a MacBook Pro 2.2GHz 15". With some external VGA projectors, after connecting the MacBook Pro, everything works great. I turn off mirroring and my presentation goes smoothly.
    However, with some particular external VGA projectors, I get a connection problem. After using my DVI-to-VGA cable to connect my MBP to the projector, nothing happens. The projector continues to project a blue screen as though nothing is connected to it and as though it has no video source. I've cycled through the projectors input selections hoping the projector would find the signal but still nothing. I've even restarted my MBP with the cables attached to the projector and still the projector shows a blue screen.
    My friends can connect their PC Windows XP and Windows Vista computers to this same projector with no problems. I used to have this same problem with my PowerBook G4 which is one of the reasons I upgraded to the new MBP hoping this problem would be resolved. What's wrong and what can I do to get my MBP compatible with the external projector?

    Sorry, I meant the cable that links between the connector and the input to the projector (RGB - IN by the way, not OUT).
    We have a number of these VGA cables at my place of work that will work with a PC but not a Mac. Some are fine. My technician holds on to a cable for me that we know works and if I get a bad one, he brings in the replacement and it takes a few seconds to go online. I also note that some of the projectors (particularly ceiling mounted ones) have an additional adapter between the cable and the projector. It may be that some of the pins are not connected.
    Of course, if the projector is mounted too high, that would not allow easy replacement.
    I would suggest finding a cable that works and carrying that around.

  • My hard drive crashed on my MacBook Pro crashed and I need to get my CS5 up and running on the new hard drive. I copied what I could onto an external hard drive but when I drag and drop I get directions to uninstall but the uninstall folder I have does sa

    my hard drive crashed on my MacBook Pro crashed and I need to get my CS5 up and running on the new hard drive. I copied what I could onto an external hard drive but when I drag and drop I get directions to uninstall but the uninstall folder I have does says it is an alias that is no longer present. I get error 6. I would like to get my software up and running on the laptop again please

    If you subscribed to iTunes match the songs are kept in icloud. If you didn't but you did save the actual iTunes library folder which should include the music, video, etc.  you should be able to just drag this file back to your machine in the same place and when you open iTunes it will give you a chance to identify the iTunes library folder. 
    You can test this to find out if you saved the media files or not and don't need to attach your nano to do it. 
    You are correct that once you connect the nano it will clear the existing files from it and sync it with the new iTunes library. 
    If you don't have the media files i'm not sure if/how to get them back on a windows ipod.  I have everything backed up regularly because of the horror stories I have seen & heard.

  • My hard drive crashed on my macbook pro and I had a new one installed and they were unable to get my pictures off of it. Is there anyone who could help? I'm going to lose all my memories of my kids! I got my old hard drive

    My hard drive crashed on my macbook pro so i had a new one installed and they couldn't get my pictures off. I dont want to lose all my memories! They gave me back my old hard drive. Is there anyone that could help me?

    I think how you understand the value of having backups. All you can do is:
    General File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as MAC Data Recovery, Data Rescue II, File Salvage or TechTool Pro.  Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.  Two free alternatives are Disk Drill and TestDisk.  Look for them and demos at MacUpdate or CNET Downloads. Recovery software usually provide trial versions that enable you to determine if the software would help before actually paying for it. Beyond this or if the drive has completely failed, then you would need to send the drive to a recovery service which is very expensive.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.
    You will need an external enclosure for the old drive so you can connect it to the computer in order to try the recovery software before you buy it. But if they don't work then you will need to send the drive to a recovery service such as Drive Savers.

  • I'm traveling to London for the summer, does anyone know a good power adapter/converter for my MacBook Pro?

    I'm traveling to London for the summer, does anyone know a good power adapter/converter for my MacBook Pro? I know there's the Travel Adapter Kit but it's only for iPhones, iPods, iPad, etc.

    Apple World Travel Adapter Kit
    The World Travel Adapter Kit includes the Apple USB Power Adapter, USB Cable and six interchangeable AC adapter plugs for use with iPod, iPhone, and iPad. The adapter plugs can also be used with Apple MagSafe Power Adapters, Portable Power Adapters, and AirPort Express, so you can plug your power adapter into most electrical outlets around the world.
    Copied from the Apple Store: http://store.apple.com/uk/product/MB974ZM/B?fnode=MTY1NDEwMQ&mco=MTA4NDE3MDQ

  • Adobe photoshop elements 4.0 crashed on our macbook pro..

    adobe photoshop elements 4.0 crashed on our macbook pro..

    Hi. This forum is for beginners trying to learn the basics of Photoshop.  I'm moving your question to the Photoshop Elements forum for specialized attention to your situation.

  • Where do I find an adapter to use the MacBook Pro charger to recharge the MacBook Air? Because it doesn't fit

    Once I saw in Apple's website an adapter to fit the MacBook Pro's charger into a MacBook Air, because the entrance is very thin... Where can I find it?

    Right here:
    http://store.apple.com/us/product/MD504ZM/A

  • I want to buy an adapter to a laptop MacBook Pro, bought in the U.S.

    I want to buy an adapter to a laptop MacBook Pro, bought in the U.S., because the laptop heats up when you put in the plug and use an adapter that is not Apple range.

    "More Like This" (on the right):
    Re: My charger for my MacBook Pro
    Direct you to the proper forum for MacBook :
    MacBook Series Forumshttps://discussions.apple.com/community/notebooks?view=discussions
    Mac OS X Forums
    https://discussions.apple.com/community/mac_os?view=discussions 
    http://www.apple.com/support/macbookpro
    http://eshop.macsales.com/shop/powerbook-ibook-macbook/

  • I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live were we only have dial-up and the Apple Store said this is what I need.

    I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live where we only have dial-up and the Apple Store said this is what I need. In addition, when I connect the phone to the connecter it falls out, it will not click in.

    Why are you using a usb ethernet adaptor? Just plug the modem into the usb port.

  • Does a usb cab to 60 Watt L-Tip Power Adapter charger for Apple MacBook Pro Laptop Charger exist

    does a usb cable
    does a Usb cable to60 Watt L-Tip Power Adapter charger for Apple MacBook Pro Laptop Charger exist? i have an external battery pack i would like to use to charge my iphone and macbook pro.

    Not that I am aware of.  An Internet search on your part will be required.  If you should find something to that effect, note it will not be endorsed by Apple and the magnetic connector will probably be in violation of Apple patents.
    Ciao.

  • Hi, after that crash of my MacBook Pro I download again Lightroom 5 with my license serial number removed , but the system say that my number is wrong, but is not. What shall I do???, thanks

    Hi, after that crash of my MacBook Pro I download again Lightroom 5 with my license 1160-4006-5882-6826-4588-7623, but the system say that my number is wrong, but is not. What shall I do???, thanks

    You probably downloaded the Lightroom Creative Cloud version. Your Perpetual License key will not work.
    Uninstall the existing version of Lightroom, this process will not affect your Catalog, Preferences or personal files.
    Then download the correct version from the link below, install and enter the license. Every thing should be just fine. (Also by displaying your License Key for all to see anyone can use it to have a free copy of the program)
    Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.6

  • Why does my Adobe Audition keep crashing on my MacBook Pro?

    Why does my Adobe Audition keep crashing on my MacBook Pro?  I've updated everything, and there are no other issues.  It is OS X and Audition CS6.  When I'm mixing a track, it will just shut down with a crash notice.  Very frustrating.

    Hi,
    What is the crash notice you receive?  OS X is very good about keeping extensive, detailed crash logs.  If you launch Applications > Utilities > Console.app  and open the "User Diagnostic Reports" group on the left, can you drag the most recent Audition crash report into an e-mail to [email protected] ?  The contents of that file should make it more clear to us why Audiiton or the OS thinks a crash is happening and will help focus troubleshooting.

Maybe you are looking for

  • How to change the default text title of Detached table/treetable

    Hi, Is anybody know How to change the default text title of Detached table/treetable. I have already read the post on "http://vtkrishn.com/2010/07/28/how-to-change-the-default-text-title-of-detached-tabletreetable/" as per this post It will change th

  • Problem with syncing IPhone with Outlook mail and calendar

    I followed all the instructions to reload, replug, turn on/off iphone & computer, but my new iphone still will not sync. The message says that sync is in progress; syncing calendar, and then: Error message: "Could not sync calendar to the IPhone beca

  • Resultset (absolute) method error

    rs.absolute(2); rs.updateInt(1,2); rs.updateString(2,"here"); rs.updateRow(); but here it shows an error message like PreResset.java:20: cannot find symbol symbol : method updateSting(int,java.lan location: interface java.sql.ResultSet rs.updateSting

  • Table name to store the Condition of service number in ML81N

    Hi All, Is anyone can advise where does the condition values stored for each service number in ML81n. Can you please provide the table name. Thanks,

  • I can't update to Belle (product code 059B288)

    I'm N8 owner with the motherboard swap code 059B288. I can't update my device to Belle by using Nokia Suite. Don't tell me i have to bring it to nokia care center for update. Getting defective first batch phone isn't my problem. Please let unlucky ow