VGA adapter doesn't work when plug it on data show-

i've tried to use my mbair linked to the datashow, but it doesn't show the content of power point document...How can i solve this problem? What are the possible solutions?
In my old PC i used to press "fn...F3" and the images were shown...how do i process it using my Mac?
thanks

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:       
iOS: How to back up           
- Restore to factory settings/new iOS device.

Similar Messages

  • Lightning to VGA adapter doesn't work with Ipad Air

    I have a Lightning to VGA adapter that I want to use with my Ipad Air and pc screen. When I connect it with my Ipad and the screen, on my ipad the blue bar appears but I don't get anything on my pc screen. I dit the same with my iphone 6 and that works perfect. Any idea what the problem could be?
    Both devices has IOS 8.3.
    Thanks in advance.

    I have a similar problem to blueskoi. I have a lightning to HDMI Connector which no longer works on my iPad Air, however it still works fine on my wife's iPad 4.
    The only difference I can find is that her iPad hasn't been updated to IOS 8.3, whereas my iPad Air has.
    Is anybody else experiencing the same problem, or am I missing something?
    I have done a full settings reset on my Air but that didn't resolve it.  I get the blue bar at the top of the screen and my TV Screen flashes, but then no signal appears,
    Any help would be most gratefully received.
    Regards
    Paul

  • Mini displayport to vga adapter doesn't work. thoughts?

    MacBook Pro, OS 10.7.5
    apple mini displayport to VGA adapter + VGA cable to tv. galaxy image shows on tv screen, but computer signal doesn't seem to be getting there. have i missed something?
    tnx!
    Janeai

    If it is showing the Galaxy image the signal is getting there. you have it set to Extended desktop. Go into the Dispplay section in System Preferences and chnge it to Mirror display, Check Box near the bottom of that window.

  • MP3+ USB External Card doesn't work when plugged into USB

    My MP3+ USB external sound card doenst' work whenever I plug it into my usb hub.
    Model: sb0270
    First I tried a powered D-link 7 port usb 2.0 hub. (model DUB-H7, H/W ver: 2) although the model number doens't tell you much is has the same model number as a USB/Firewire hub with 3/4 ports.
    The sound card is recognized as a "composite" device. But no sound goes "through" it (light doesn't flash).
    I'm now using a Belkin 7 port usb 2.0 hub, model f5u237 rev. 3.
    When I plug the soundcard into my computer it stops the laptop speakers, and then my sound system starts playing. When I unplug it my sound system stops, and then my laptopspears start playing. When I plug it into the USB hub the sound on my laptop speakers stops, windows finds a USB composite device, then the sound starts playing on my laptop speakers again.
    I've tried this on 2 computers a HP ZV600 and a HP dv5040us.
    dv5040us specs: http://h0025.www.hp.com/ewfrf/wc/genericDocument?cc=us&docname=c00584686&lc=en&jump id=reg_R002_USEN
    This is the only USB device I have that is not functioning correctly. (2 HDDs, keyboard, mouse, printer, mp3 player, controller, and joystick)
    Even if those arn't plugged it it still doens't work.

    I tried with another USB flash card and with a smaller file.
    The transferring from Mac to the card starts but is extremely slow ( around 0,5MB/sec)

  • Video iPod Nano doesn't work when plugged in anymore

    As of recently, whenever I plug my Video iPod Nano into my Hi-Fi the screen locks up. The music still plays through the Hi-Fi, and I can control the volume via the unit however the screen completely is frozen, and unresponsive to any movement on the clicker. It worked fine before, and this now a recent happening, and I have a feeling the latest update to the iPod Nano knocked it out.

    I'm not not sure why this question is flagged as "answered".
    I'm experiencing exactly the same behavior. If my nano (3G) is put into my HiFi while in play mode, it will continue playing through the HiFi, but the nano screen will freeze and its controls will become unresponsive. Only the HiFi volume can be controlled via the HiFi top buttons. Ditto for the remote - only the volume controls function (although the HiFi green LED responds to all remote commands as normal).
    If the nano is inserted into the HiFi in menu mode, it just remains unresponsive. When taken out of the HiFi dock, it will invariably remain unresponsive for 30-40 seconds, then suddenly light up and return to normal.
    In fact, my nano (3G) has always acted this annoying way with our HiFi - which continues to work flawlessly (extra menues and all) with the sundry older iPod models that we own.
    Yes, I have tried resetting and restoring the nano (now at firmware version 1.1) and the HiFi no avail.
    I'm curious to learn whether anyone has actually gotten a nano (3G) to work properly with a HiFi.
    P.S. Great product the HiFi - can't for the good of me figure out why Apple discontinued it... It's truly adding insult to injury if this thing of beauty no longer works properly with the newer iPods.

  • I have a VGA adapter and an iPad2.  Tried projecting my iPad2 to projector using the VGA but doesn't work.  Tried it with friend's iPad1 and it works.  Why??

    I have a VGA adapter and an iPad2.  Tried projecting my iPad2 to projector using the VGA but doesn't work.  Tried it with friend's iPad1 and it works.  Why??  Pls help.

    Yup - nothing happens.  I then took the same VGA cable and plugged it into my friend's iPad1 and it worked perfectly when she opened Keynote.  My understanding is that the iPad2 mirrors the entire screen, so no need to go into any specific application in order to project to the screen, right?  Do I need to download any specific app or change any settings in order to be able to project the screen using VGA?
    Sorry - novice at this.  Not very tech minded either...

  • I cracked my screen. I want to use other monitor which I had one. I bought Apple Mini-DP to VGA adapter. It worked. It means I can see ADDITIONAL screen. However I want to use this monitor for the main screen. How can I do?? Please help.

    I cracked my screen. I want to use other monitor which I had one. I bought an Apple Mini-DP to VGA adapter. It worked. It means I can see ADDITIONAL screen. However I want to use this monitor for the main screen. How can I do?? Please help.

    You have the display set in Extended Desktop mode. The Menu Bar and Dock will be on the MacBook display and your background screen on the monitor. In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the monitor and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen. You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse.  http://support.apple.com/kb/HT3131 When you disconnect from the monitor your Menu Bar will automatically change back to the MacBook.

  • My I pad doesn't charge when plugged into my computer. HELP

    My I pad doesn't charge when plugged into my computer. HELP

    iPads don't get enough power from some USB ports to charge. It will charge, but very very slowly. Use the adapter in a wall outlet for best performance.

  • Only works when plugged in

    My iPad 2 was left on overnight, not plugged in with the battery at 95% last I checked. This morning it was off and I was unable to turn it on. I plugged it into the charger and it seemed to start up, but the date and time had been reset to December 31st 1969 at 4pm!!! Then, I tried to reset the date and time but it would automatically keep going back to that date. When I went to unplug it, so I could sync it with iTunes, it turned off immediately! It only works when plugged into the charger and even then it turned itself off after about 2 minutes. While unplugged, I tried a hard reset (holding the home and sleep/wake button down at same time for 15 seconds, but it doesn't do anything at all. I did notice that it was pretty hot yesterday, but didn't have any problems running it at all. Any suggestions, or is this clearly a hardware problem? Thanks in advance.

    When it was plugged in, it was at 95% so that's not the issue. THe battery appears charged, but the device simply doesn't want to run on it. The weird date reset makes me think it could potentially be a software issue, but I'm worried it is essentially a hardware/battery problem.

  • Charger works when notebook is off, but it doesn't work when the notebook is on.

    I have a HP Pavilion dv6-3070tx Entertainment Notebook PC.
    My charger doesn't work when the notebook is on and plugged in, but when the notebook is off (or even when it is in sleep mode) it gets charged. I tested this by using different chargers that work in other hp notebooks. If this can be solved, I'll be grateful.

    Hi
    There are two structures of DVDs
    • Data-DVD - as burned from DeskTop/Finder
    • Video-DVD - to be played on a DVD-Player - Needs a program that can do this
    One can in iMovie - Export as QuickTime .mov and save this via DeskTop/Finder onto a DVD - BUT this will only play on a Computer and if it is a Window-PC this needs to download QT-player or VLC-player.
    But no DVD-player for TV can play back this.
    To get a Video-DVD then You need
    • iDVD (not from Apple any more) - or -
    • DVD Studio Pro (not from Apple any more) - or -
    • FinalCut Pro-X (can do simple Video-DVDs) - or -
    • Burn - http://www.digital-digest.com/software/Burn.html - FREE - but very PLAIN - no fancy things at all.
    • Roxio Toast™ 11 Pro - Fairly advanced - and costs a bit - still very Good and lot's of great tool's included. (I love it) - Can also back convert home made DVDs to an editable mode in an OK quality. With BD-component also capable to do sort of Blu-Ray DVDs.
    Yours Bengt W

  • Classic iPod not charging; only works when plugged in

    My iPod Classic would work only when plugged in my computer or to the wall. I noticed that when I plug it, the battery automatically turns green and the fully-charged symbol appear. However, when I unplug it, it doesn't work. Any ideas on what I can do? It's no longer under gaurantee so anything that I can do at home would be helpful. Thank you xx

    Seems very unlikely you need a new Macbook since it works when "plugged in"; at worst you will have to spring for a new battery.
    Try running this program - it will give you info about the state of the battery:
    http://www.coconut-flavour.com/coconutbattery/

  • How to recover music? iPod only works when plugged into wall outlet

    My iPod is probably 5 years old or so. It's been acting up for a while and I stupidly, did not back it up.
    The battery was replaced this weekend so it works when plugged into the wall. It will not power on or do anything when not plugged into the wall. When plugged into the wall charger, it can turn on and says it is charging. It can be used then but as soon as it is unplugged, it's dead.
    When it is plugged into the computer, it says "Charging. Please wait...". There isn't enough power from my laptop to power the iPod, so my computer doesn't even recognize it. It does not show up in iTunes.
    On the brightside, I have a new iPod classic waiting to be used. However, I would VERY much like to get my 90gb+ off of my old iPod first. Is there a way to do this? 
    I'm at a loss. Some of the files are on there are not anywhere else. I have a few songs by a friend who lost them on their own computer.
    Any help would be very appreciated!

    Bump. Is there no way to solve this?

  • My speaker doesn't work when I try to listen to music or open up a quick time file, however they seem to work perfectly when I listen to a voice memo (p.s. the volume slider disappears in a song page and even in the multi tasking bar)

    my speaker doesn't work when I try to listen to music or open up a quick time file, however they seem to work perfectly when I listen to a voice memo (p.s. the volume slider disappears in a song page and even in the multi tasking bar)

    Thanks for your solution, it wasn't quite what solved the problem but i remembered that i had a bit of salt water on my phone recently and spraying the charging port with an anti-oxide spray solved my problem, do you mind if i ask, how is the charging port related with the volume or/and speakers?

  • How do I use a NORMAL headset (dual 3.5mm) on my new Macbook pro retina? No usb ports available and headset buddy adapter doesn't work.

    Title says it all:
    How do I use a NORMAL headset (dual 3.5mm) on my new Macbook pro retina? No usb ports available and headset buddy adapter doesn't work.

    Hi Auracles1,
    Here's a pretty discussion regarding wireless printing with this device and a Mac.
    http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/HP-Officejet-6500-E 709n-wireless-issue/m-p/258853
    I have a similar OfficeJet and it was a multi-step process. (1) Install printer drivers on the machine, (2) Add the printer queue in print & fax, (3) Run the "setup wizard" from the disc for wireless printing.

  • HT1430 my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

    my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

    There is a hardware problem.  Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.

Maybe you are looking for