VGA at PCI 3, not in AGP, Why?? (K7N2 Delta - ILSR/5600VTDR

hi...
When i enter to see the properties of my VGA card adapter, it is in the "PCI 3"bus, why doesn´t it in AGP bus ??
i downloaded the "DMI info", the PCI 3 is "in use" and the AGP is "available".
Is there something wrong ??
my configuration is:
K7N2 Delta - ILSR
MSI GeForce FX5600VTDR 128Mb
512Mb DDR
Athlon 2.4 tb

Have gone into your bios and adjusted your chipset settings? If not you need to change a few things first of all your default settings for vga are set for PCI so you'll need to change that to AGP. Second your memory usage will need to get upped from 64 mb to 128mb. Next you'll want to enable 8x speed and fastwrites these will increase video quality.

Similar Messages

OC: can change multiplier but NOT the FSB on K7N2 Delta ILSR XP1800+ TB 'A'

I have had a good look at the various threads in the forum which to be honest confused me a bit more. I explain.
The good news (for me): so far I have successfully changed the clock speed of a Thoroughbred 'A' XP1800+ on a K7N2 Delta board. Default is 11.5 but 12.5 or 8 are working fine. On 12.5 the mobo recognises the cpu as a XP2000+.
The bad news: I cannot change the FSB from 133 to anything else even in Advanced Chipset Features, manual, high performance settings. Not even a lower one works for this setup. As said above, the multiplier however IS reasonably overclockable - the system simply won't let me change the default FSB of 133.
As far as I understand it, the 1800+ is unlocked even in its TB 'A' version. So the 'wire trick' won't help me I guess.
The fairly low spec AGP card? If so then a lower FSB should be possible.
The memory should be fine, it's CL2.5 Crucial PC2700 333 DDR.
BTW: I don't think the PSU is the problem here. I had a 380W PSU in there (noisy although named silent!) which didn't change a thing.
Any help or thoughts greatly appreciated!
Cheers
Chris

I unplugged psu, cleared cmos, applied default bios values. Then as suggested set multiplier to auto (H/W), reboot, and set the cpu/fsb interface back to Manual.
And it worked! Crazy. The system must have been stuck in some kind of loop... anyway, thanks very much Wonkanoby for your help!
After sorting this prob, I gradually raised the FSB to 166 while decreasing the multiplier to 9.5 = 1577MHz. Temps didn't chage a bit which makes sense for the cpu but I expected the northbridge chip to get a bit warmer. Don't know about memory.
Does any of you have experience with OC a Thoroughbred 'A'? I assume it is less OC'able than a type 'B'.
Or in other words: where's the limit?
Cheers
Chris

K7N2 Delta-ILSR Agp conflicts

hi all
just regestard NEW BEE
just got k7n2 delta-ilsr
got all set up BUT, i had to use old graphics card to install Xp pro then put my primary graphics card in (phrophet 4500 64mb) in started up system and in devices of motherboard the pci to agp recources were all full up and dont work so the graphics card doesnt work, any ideas ??????
ps I'll have to get uptodate driver for graphics card.

Hi,
Killy your score's not bad at all! I'm more used to 3D Mark2001SE scores but yours seem very reasonable. I get about 1,600 on 3DMark03 and I run most recent (3D games) without problem (a little slowing down here and there) but your score is nearly 3 times mine! - Quite respectable!
Axel

AGP Setup For k7n2 delta ilsr

I have a k7n2 delta ilsr mb, in display properties on desk top setting tab then advanced button then GeForce tab under adapter information is Bus and memory. To the right of Bus it reads AGP (PCI mode) shouldn't that read AGP (8X), how can I change this. Ron.

Hi,
No, leave it at 64 or 128.
Go here for an explanation:
http://www.rojakpot.com/default.aspx?location=7&var1=18
Then - Click on: "Free Access To the BIOS Optimization Guide" near the bottom of the page - then click on "AGP Aperture Size"
Axel

Nvidia Ti 4600, K7N2 delta Ilsr, AGP Rate

I am a noob to forum , Please be gentle !!
On infoview I get report that AGP rate is x 1. All drivers are up to date as of Feb. 10, 2004, including BIOS upgrades, and both video and Nvidia board chip drivers all from MSI.
In CMOS set up the x 8 switch is on as well.
Is the x 1 infoview correct ? If so why do I not get support for the AGP x 8 ?
How do I assess the actual transfer rate ?
I tried to search forums for answer but did not find it, if you have already dealt with this please direct me to the thread and posts. This is a great resource, thank you alll for your assistance.

Hi,
Haven't you the oprtion to change the AGP speed within the nVidia Control Panel options.
Axel

MSI K7N2 DELTA-ILSR ( MS-6570G ) AGP DISABLED PROBLEM

Hi . i have the above MB + Radeon 9800 pro graphics card + 1gb of ram + 550w PSU + 2.8 athlon XP. Bios is set to enable agp8.
AGP is always disabled and will not switch on . Even when i try to enable AGP thru the ATI SmartGart software the system reboots with AGP disabled
Latest ATI & Nvidia drivers have been installed.
What should the bios AGP settings be ?
Please help..
Regards SR

Hi All,
Its a 1yr old pc i built myself and worked fine with a Hurcules Geforce card.
Reloaded the Nvidia driver from the link above and AGP is now working on 4x. Do you have the Audio driver separatly as it the install stops responding whilst loading the audio part ?
You were right about ATI not liking 8xAGP, it runs like a dead dog with that switched on.
My PSU is gold but with two 120mm fans & is branded "Colours-IT" what brands or models do you recommend ?
Many thanks for the help so-far, my pc finally plays "call of duty2"
Regards
Scott

[nForce] K7N2 Delta -ILSR Fan that read "MSI AGP 8x" broke.

My fan had made some noises throughout the week but it seemed when i turned the computer off and then back on it would stop I checked inside and it was working perfectly today it made a outrageously loud noise like it was about to blow up and sure enough it stopped working. If your not sure which fan it was, it was the fan located on the motherboard directly that was the smaller one with a purple label and words that were outlined in silver reading "MSI AGP 8X." Any help will be appreciated! Should I get a new motherboard? Is their away I can fix the fan? Can I buy a new fan?

Quote from: IronCatt on 02-October-05, 10:52:54
Vantec Iceberq; cheap, quiet and effective.
Yes

RAID not fault tolerant on K7N2 Delta 2 Platinum?

Hi all,
I'd really appreciate your help with this puzzle.....
Got a new mobo & 3k Barton chip.... Installed 'em into rig described in my sig below.
Minimum hardware was installed for this operation:
new mobo & chip
1 gig mem card
CDRW
Floppy drive
SATA drives x2 each on separate SATA port
video card
Entered Bios on 1st boot:
Set SATA to enabled in IDE RAID window
Boot priority to CD Rom for install
Hard disk boot priority to SATA Mirror
F10'ed into NVRAID BIOS:
Set up the RAID as a mirror (RAID 1) with optimal stripe size
cleared & reformatted both discs
Mirror is recognised as healthy on reboot.
Booted into WIN XP SP2 slipstreamed install (this disc has been used successfully before on my previous mobo so I know it works)
Pressed F6 & loaded NV RAID class driver & NV nForce Storage Controller successfully
Did the Windows install routine & this is where it starts to deviate from what is written in the manual....
the request to install the RAID driver during the GUI part of the install never appeared (but this is described as a "might be prompted" in the manual so I wasn't too bothered by its non-appearance) and the driver floppy did spin up at one point so I assumed it had installed each drive automatically
Went into WinXP and finished the install...
Surprisingly, both RAID drives are now visible individually in the systray as removable drives under the SAFELY REMOVE HARDWARE icon.
Went into Disk Management expecting the Initialize & Convert Disk Wizard to appear but no sign of it: RAID drives are visible as ONE drive (as you would expect) but are NOT fault tolerant.
Things I've done differently each time I installed:
Tried to convert the mirror to a dynamic disc but this also failed every time.
Installed nForce2 system drivers before & after going into Disk Management on different installs
Installed NVRAIDMAN.exe and this reports the mirror as functional & healthy.
Left the floppy in the drive during the GUI part of WIN XP installing itself and removed it on other install
I've read the nvRAID FAQ & this isn't covered by it.
Can't find any reference to the Initialize & Convert Disk Wizard in Microsoft Help & Support, except in a Windows Server 2003 KB article, which I can't find again....
I've repeated the whole process several times to ensure I haven't missed anything, but the end result is always the same.
So I now have a weird mirror array that is not fault tolerant in Windoze Disk Management - is it doing what it's supposed to?
Any ideas??

As it seems you are doing extensive tests, i would suggest a simple one:
install as you have (where the RAID manager tells you it is setup correctly and redundant and windows does not see it as redundant), power off and take one drive off. Reboot and see the result. (it should still work and the controller should tell you that redundancy is not valid anymore)
After that, power off, replug the drive and see if it will reconstruct the array.
Try for the 2nd drive.
Then, you will be sure that redundancy is present...
It seems that with SATA, you can even hotswap the drives (hence the appearance of the drives in the SAFELY remove box).

Best agp card for k7n2 delta ilsr

Hi again folks
I'm thinking of upgrading my graphics card as although this card has never let me down its the oldest component in my box, I would like to get something in the sub £100 range, I dont do games but may wish to in future, mainly it would be for photo apps/running-backup-watching dvd's etc. any info would be greatly appreciated tia Hazzo

I notice your talking in £'s so I assume your located in the UK.
Have a look around overclockers.co.uk
For a sub £100 I noticed a good offer:
HIS ATI Radeon 9800 Pro - £82
Also, the 6600GT here is only £103.24 (£106 inc delivery), altough only 4 left in stock so buy now if you want one

MSI K7N2 Delta 2 - nvraid drivers will not install

I have recently upgraded my mobo to MSI K7N2 Delta2 Platinum. I use Athlon 2700+ running at 2.157 GHZ, 512 MB Samsung PC3200, 128 MB ATI Radeon 9700 Pro, 3 WD Hard Drives (Main bootable HD 60 GB and 2 identical 80 GB HDs configured as nonbootable RAID 0). I am running Windows XP PRO (OEM) with SP 1A. I did not have any problems with configuring RAID 0, however I cannot install drivers for it. Windows keep refusing to accept drivers and computer keeps rebooting itself when I try to install those drivers. I emailed MSI, but I got no reply as yet. Does anybody have any experiences similar to mine? Any solutions? Help will be greatly appreciated.

Some additional information. I did not reinstall Windows after replacing the old motherboard. My previous mobo was also from MSI. It was MSI K7N2 Delta - ILSR. When I installed my new motherboard, Windows would come up without any problems. I had a problem with driver installation disc. Setup would not run, well, I take it back it did, but in some kind of invisible mode. What I mean is that the MSI Driver and Utilities Setup window would disappear after a few secionds and when I clicked on setup icon again another window would pop up telling me that the set up was already running. I went around that problem and installed all drivers from within individual folders as I was able to explore the Setup disc. The only driver I was not able to install was nvraid. I hate to reinstall Windows anew, because Microsoft treats one like a criminal, if you call them too often, asking all kinds of questions befor they decide to activate the OS. I did a lot of upgrading within last 2 months and this would be my 4th call to Microsoft if I had to run fresh installation. I am wondering if I could just remove old drivers using either Driver Cleaner or going to INF file and deleting the old drivers from there?

SATA HDD not detected in Bios K7n2 ILSR

Hi! I have a MSI K7N2 Delta-ILSR and I just bought a new hard drive (sATA) but it is not recognized in BIOS. There are no options to enable sATA mode in the bios and I couldn't install WinXP even after loading the driver (by pressing F6 on the setup). The only way for me to install WinXP is by setting up CTRL-F and setting up an array for RAID BUT even after installing WinXP via RAID, the sATA drive is still not detected in BIOS. Is there any way that I can use the sATA drive without having to RAID it? Hope you guys can help me...Thanks!

Promise SATA/RAID controller on this board is a seperate chip, so BIOS has nothing to do with it.
to use a single SATA drive on this board, press Ctrl+F to set up a striped array and add the single drive to it, install Windows onto the drive, making sure you press F6 when prompted to use the Promise driver on the floppy disk

" help me please" I have Windows 7 installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me

" help me please" I have Windows 7 32 bit installed on my mac pro and Bought Mini DisplayPort to VGA Adapter to connect to lcd tv But it does not work? why? please help me
I have to boot with a Windows
When I use the Mac operating system not have a problem and DisplayPort to VGA Adapter Working properly
why does not work with windows ?
What should I do؟
I'm grateful to give advice
tanks
[email protected]

Someone in another section answered this. Thanks.

Ipad2 gives me ""accessory is not supported" message w/ VGA adapter that I used lots of times before. Now it's not working. Why? and how do I get it back to normal functioning?

Ipad2 gives me ""accessory is not supported" message w/ VGA adapter that I used lots of times before. Now it's not working. Why? and how do I get it back to normal functioning?
I used the (Apple branded) VGA adapter lots of times last year. Now I got back to one place I used it many times and it does not work. When I restart iPad with the adapter connected, I get the "accessory is not supported"message. But that same accessory WAS supported before.
This is very annoying as I planned a whole bunch of presentations starting this week to do with my iPad2 and that adapter.

I received the same error message, "Accessory Not Supported" from both the VGA and DV video adapters I purchased, both were boxed direct from Apple. However, to bypass this problem I simply clicked on Photos icon on iPad2 and flipped through photos until it displayed on my projector. I then exited the Photos app and my home screen displayed fine on the projection screen.
Some logic issue with the video adapters, but launching Apple Photo app initializes the video adapters then they work fine for mirroring after that.
Platform: iPad2
IOS: 5.1.1
Best regards!

HP 14-d017AU: Issues with Webcam, Network, Ethernet, VGA and PCI Device drivers

I downgraded my new HP 14-d017AU to Windows 7, 64-bit. Since then I have not been able to find drivers for Webcam, Network, Ethernet, VGA and PCI Device. The Hardware IDs are as follows: Ethernet Controller: PCI\VEN_10EC&DEV_8136&SUBSYS_2191103C&REV_07Network Controller: PCI\VEN_168C&DEV_0036&SUBSYS_217F103C&REV_01PCI Device: PCI\VEN_10EC&DEV_5229&SUBSYS_2191103C&REV_01Universal Serial Bus (USB) Controller: PCI\VEN_1022&DEV_7814&SUBSYS_2191103C&REV_01Standard VGA Graphics Adapter: PCI\VEN_1002&DEV_9834&SUBSYS_2191103C&REV_00I will be grateful for your assistance.

Hi: See if this works... Graphics: Install and reboot. http://support.amd.com/en-us/download/mobile?os=Windows%207%20-%2064 USB 3: Install both of these and reboot. http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6943836&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_137148_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6943836&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_133037_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken Wireless: http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_128686_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken PCI dev: http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6943836&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_133237_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken Ethernet Controller: http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6943836&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_133348_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken Webcam: (won't work until the graphics driver is properly installed). http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131219-1&cc=us&dlc=en&lc=en&os=4158&product=6825117&sw_lang=

Some of my contact names are not appearing when they text message me. They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

some of my contact names are not appearing when they text message me. They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

I have this identical problem. For a while my group texts didnt show up on my ipad. Then one day they did, maybe everyone in the group started using the same os version or something. Ever since my first reply to the group there have been complaints of multiple threads. I can not find a pattern for when my group text's decide they want to create a new thread. (it doesnt happen every time) Everyone in the group has deleted the thread, we've all toggled imessage on/off etc. There still hasn't been a solution.
Any help would be appreciated.
Thanks

VGA at PCI 3, not in AGP, Why?? (K7N2 Delta - ILSR/5600VTDR

Similar Messages

Maybe you are looking for