VGA Bios update problem

I keep getting the error "Can not find the VGA BIOS State." when ever I try to update the bios. I can't find any information about it anywhere either.

Do not try to update your VGA BIOS, it is not like a motherboard. Live Update has been known to render cards useless. Consider yourself lucky, you may have had a brush with death.
Take a look or do a search of this forum and you will see what I mean.

Similar Messages

VGA BIOS UPDATE

I have a MS-8866 Geforce4 mx 440 card. I am wondering if there is a vga bios update available. I still have the one comes with the card(I think 07.00T)

I recently used the live update software that came with my card and it said i could use a new VGA bios. Cautiously i continued by the letter and now I have a computer with a G4MX440SE-T that doesn't work. If any one out there knows a fix I'll will forever be grateful!
Asus A7N8X Del
AMD 1800+
MSI G4MX440SE-T
Corsair 2x256

Where is msi vga bios update for GF4 Ti cards?

It seems like many other card vendors are updating the bios on their GF4 cards for better performance. My friend got a nice performance boost on his winfast from a bios update. Everytime I search on MSI Live Update (I have to update Live Update...whats up with so many versions of a simple download utility) it says there are no vga bios updates for my GF4/4400. I read on these forums that .25 (I think) was a disaster and trashed everybodys cards. Is there news on an improved update?

Msi are going to be last, and then if they release new bios for G4Ti cards.
Don´t you now they suck, I would sell my card right now if I could.
I'm using Asus DVCR for TV because Wincoder with my version did not support full screen window.
I got fantastic stupid tips from MSI support, because my MSI-CLOCK and 3D!Turbo don't work. And it still not work with XP.
If I had 1$ for hour that i had spent to this card trying to let work right. I could get better card from other vendor. I will never get anything with MSI stamp. I'ts better to spent more money and save time for better thinks.
Regards
Finnbogi

MSI z77a GD80 PCI-e running at 8x and Bios update problem

Hi guys, first of all, sorry for my bad English, this is also my first topic, i recently bought a new PC, the spec is:
i7 3770k @4,3ghz
Corsair H80
MSI z77a GD80 bios 1.2
GTX 680 lightning
8gb ddr3 1600mhz cas9 G.Skill
1TB HDD WD Caviar Black
Asus xonar DX
The problem is, since the first bios, i can't run my PCI-E at 16x, i know when my card is idle the PCI-E goes to 1.1@4x , but when it's in use, it turns to PCI-E 3.0@8x , I'm also waiting for bios updates to check if it solves my problem, but when i try to download the new version 1.3, the download fails ( I'm trying to download with Live update 5 )m is there somebody that can help me solve this problem pls?
I've tried until now:
Replace the card into the first PCI-E slot again
Clear the PCI-E slot
Update to bios 1.1 and 1.2 ( 1.3 is not even downloading )
Set PCI Gen 3 from Auto to disable, and it keeps running with PCI-E 3.0@8x
Thx for any help !

Quote from: Froggy Gremlin on 18-November-12, 16:22:21
As per the manual, the VGA must be in the primary slot to run 16X. BIOS setting for graphics 3.0 should be set to Auto.
Do not use Live Update for BIOS updates. Too many borked boards are the result. Use the forum's USB method;
>> Forum Flash Method <<
Just curious. If I installed Add-on card that run at PCI-E 4X on 3rd slot (2nd slot is empty) what's configuration will apply ?

Z97 Gaming 5 BIOS update problem.

Hi. Firt of all i want to apologize for my bad english .
Yesterday i bought MB form subject and i want do update my bios ( curently ver 1.4 ). When i want flash under Windows ( Windows 8.1) program doent do anything, when i use M-Flash it stucks on 100% and also do anything and when i use MSI Forum HQ USB flashing tool after integry veryfy in wondows program just disappear. Someone please help.
Specs:
Board: MSI z97 GAMING 5
Bios: Version 1.4
VGA: MSI GTX 970 Gaming
PSU: Corsair RM850
Intel Core i5-4690K
MEM: Kingsotn HyperX 4x4GB 1600Mhz
SSD1: Samsung 830 128 GB
SSD2: Samsung 840 EVO 500 GB
HDD1: WD10EZEX 1TB
HDD2: Samsung SpinPoint F3 HD502HJ 500 GB
COOLER: Macho Rev. B
OC: NOT YET
OS: Windows 8.1 x64

Thx for reply
Quote from: Nichrome on 04-June-15, 16:00:37
However if you need BIOS update prior to have some RAM or GPU working fine (or other stuff), then maybe consider updating to 1.6 and then to 1.9 and finally to 1.B (1.11). I suggest using MFlash (files can be downloaded on MSI's product site, instructions should be included). For Forum Flash tool you need proper files provided (usually) by Svet or Flobelix.
Before attempting to flash, make sure your system is stable!
I downloaded BIOS 1,5 and 1,6 and in both cases i have same issue it stucks on 100% on M-Flash, after this I can normaly shut down pc and it work but witch 1.4 BIOS. I just want know whyi can;t
updtate.
Video from using Forum Flash Tool:

Bios update problem...

i have a lenovo 3000 N100 0768 AQ1...I don't know which bios it had...i tried to update it...i downloaded bios update utility from
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67008#install
and extracted it...after that i went to C:/> drive where it was extracted and double clicked a file name ...
"ADROMLDR.exe"....a window poped up i flashed the bios using a file "DL01108.WPH" in realtek folder...since then i have been faacing problems ...i dont have back up bios ...i formatted my laptop thinking it will get ok......
my pc still has the problem....if i use keyboard the usb get connected and disconnected frequently...and the audio is having problem too....if i start my pc with headphone plugged in..te speakers of laptop don't work..just the headphones....and if i restart with no headphone plugged in...speakers play but they play even when i plug in the headphone..i.e. both headphone and speakers work at same time........
please help me.....what should i do???

installed latest intel and sound drivers for your pc?

Failed vga bios update

I used the liveupdate 3 to update my vga bios and when it rebooted the computer the videocard wont work now. I flipped the twinbios to the safe mode but nothing happened. When i put my old card in it works fine. Any suggestions?

Nope, I don't think so, not on the Dongle unless MSI is doing something I do not know about.
The Jumper is located on the card itself, please refer to the manual for the location.
If you have flashed the wrong BIOS:
The MSI cards have a dual bios feature.
Move the jumper to 2'nd position (there is only one jumper on the cards).
Boot with the secondary bios
Move jumper back while system is up and running
Use live update again (the backup bios is not being overwritten since you moved the jumper back).

KT4 Ultra-B BIOS Update problem

Well, I runned Live Update BIOS and found out that I didn't have the newest version. So i downloaded the newest (1.4), and followed the instruction for the installation. After it was installed, every thing seemed okay. Untill I started the PC, then I got an 'error' message:
CMOS Settings Wrong
Press F1 to Run SETUP
Press F2 to load default values and continue
I checked the CMOS Settings, nothing I could find was wrong. So everytime I start the PC I have to press F2, or else it won't start, it will just jump back to that message. This is not so much of a problem, but when I have to use the default values from now on it _IS_ a problem, because default FSB is 100MHz, and I loose alot of CPU. I now have AMD Athlon 1500+ 1,35GHz because of that BIOS update. What I really should have is AMD Athlon 2200+ 1,8GHz.
So anyone that could help me with this problem ??

There is a reason why it did not work.
When you buy a board and put a CPU in it, the board may not detect the CPU correctly,
So if your cpu was a 1470Mhz Athlon and the board detected it as 2.2Ghz what would happen?
The CPU would try to run at 2200Mhz and blow up
So manufacturers such as MSI set the CPU FSB to 100Mhz, must modern CPUs run at 166Mhz so by having it at 100Mhz you prevent the board from overclocking the CPU.
Do you see how that is a safety feature?
Now when you flash a BIOS you clear all your settings and the board gets reset to the safety defaults (100Mhz). This also happens when you clear the CMOS using the jumper, thats why it did not work
I assume someone else originally setup the motherboard and CPU settings for you?

H8-1414 does not boot due to bios update problem

Hi, I did a BIOS update on my desktop last night , now it does not boot up and the motherboard send 8 long beeps with no video output. It seems that 8 beeps correspond to motherboard BIOS problem I was pressing ESC and F10 keys to enter Bios settings but no luck...always 8 beeps and no video. Need to access BIOS setting on the screen or do BIOS reset but don't know how to do it on this case. Any help ?...Thanks! HP ENVY H8-1414M3970CM MotherboardAMD FX-6120 , 8 GB RAMAMD RADEON HD7450 VIDEO

Hi buddy,
You should check the forum content or with other words, use the forum search firstly before you ask something. Failed BIOS update is not unusual and can happen always. The forum contains already a lot threads about this and the only solution is contacting an ASP. The guys have professional tools to recover it.
The same question was asked here:
http://forums.computers.toshiba-europe.com/forums//thread.jspa?threadID=53366

Thinkpad Yoga BIOS Update Problem after installing Windows 10

Hi all, I've been reading tonnes of threads here trying to solve my problems (which seem to keep getting worse) to no avail. I'm reaching out to anyone that can suggest some help before I end up bricking my yoga by accident or running it over on purpose. I'll give you a timeline of the events. The machine in question is a Lenovo Thinkpad Yoga 12.5" 20CD-0032USIntel Core i5 4200U 1.60GHz Processor4GB Ram128GB SSDWindows 8.1 64 Bit preloaded (recently upgraded to Windows 10) So the saga begun just a short two days ago. I had some spare time at home and decided to download and install my free upgrade to Windows 10. I backed up all of my important documents etc to OneDrive as I intended on performing a clean install. Said clean install went flawlessly with Windows 10 installing the first time with no issues or errors. Since I had performed a clean install, all my previous apps, including the stock Lenovo apps, had been deleted. I had anticipated this and only really desired to reinstall the app that automatically adjusts the screen orientation when folding the cover back. So in an effort to find this app and any Windows 10 related updates that may be available I went to support.lenovo.com and used the handy Lenovo Bridge app to automatically detect my hardware and suggest relevant updates. While combing through the suggested software I noticed a BIOS update that noted added support for Windows 10. How great, I thought, that Lenovo would have a BIOS update ready so quickly once 10 became ready for mass consumption. I went ahead and downloaded the exe version (not the bootable CD due to the lack of CD drive on the Yoga) and ran the BIOS update. As I ran the update the laptop was plugged in, and no errors were presented, a success message appeared and indicated a reboot was necessary, after a couple seconds the system rebooted itself. Enter nightmare level 1. As soon as the system rebooted, I fired up IE about to look for more updates and......BSOD stating that there was and issue with a driver, after another reboot BSOD again with a completely different file name stating driver file missing or corrupt. Sorry I didn't write any of the file names or errors down. At this point I'm thinking that something is not jiving here between the BIOS and OS. So I tried running repair, and recovery and each time I would end up with a BSOD of some design. It was at this point I made a USB with the Windows 10 x64 ISO from Microsoft in an attempt to run the repair utilities from the USB. Again to no avail. Enter nightmare level 2 After attempting multiple tries at recovering Windows 10 and getting multiple BSOD's through the process I decided to use my Windows 10 USB to simply reformat my hard drive to eliminate any traces of my now apparently corrupt OS and do a fresh install of Windows 10. This appears to have been a significant error on my part. Now I have no OS (BIOS is still intact so at least I think I have a not-bricked motherboard) and everytime I try to boot Windows 10, or 8.1 for that matter, from a brand new USB stick I get constant BSOD's.Sometimes I get as far as the Preparing installation files 22% but am interrupted by a BSOD error at some point. So I am pleading for some help here. To me it seems like the BIOS update was the issue. I was not smart enough to have checked the BIOS version before updating so that I would know what to roll back to safely. What would you all recommend for a rollback and how do I go about doing one with no OS on the machine. I know I'm asking for a tl;dr here but appreciate any advice offered. I really dont want to get to nightmare level 3, which I guess would be a bricked laptop and a bill for a new motherboard or laptop. The BIOS I currently have is GQET45WW (1.25) -Garrett

Thanks for the reply ColonelONeill, It turns out that Lenovo uses an obscure PERL disk image called "eltorito". As such the directions in the link you provided did not work as most common tools (WinZip, 7zip, and WinRAR) cannot extract the image file from an eltorito iso file. I instead just bucked up for a $50.00 Asus USB CD drive and burned the iso for version 1.25 and 1.24 onto discs. I then disabled the setting in the BIOS that prevents rolling back to a previous version and flashed to 1.24 from the disc. While this appeared to go successfully, as soon as I tried to boot from my Windows 8.1 CD I start receiving BSOD's again during installation. I then used the CD with 1.25 to go back to where I was in case it was simply a bad BIOS update at the time. Most of the BSOD's are driver related (qlfcoei.sys) which I don't understand since there is no OS other than what is on the bootable CD (or USB I've tried both) Is there anyone with a stable install of Win 8.1 x64 or 10 x64 running on a 20CD0032US that can tell me what version of BIOS they are running? My next step is to go back to a version that someone else can verify is working. Thanks again for any help.

Qosmio G30-162 - BIOS update problem

Hi, I have a problem with updating the BIOS on a Qosmio G30-162 which appears to be running the following version: -
Version 1.20
DMI Version 2.3
BIOS date 01/21/06
Every time I run the V3.90 update it says that it is not valid for this machine.
Does anyone know how to resolve this issue?
Many thanks
The BIOS update I am trying to run is V3.2.9 (P0038v390.exe)
When I run the files the update says that "This computer is not supported".
Many thanks

PauPau, many thanks for your help - absolutely spot on
Still not sure how that module was uninstalled as it was a factory install of XP MCE!
However, BIOS updated successfullky after download and install of Toshiba Common Module 6.04.00
Again, many thanks

BIOS Update problem, T15-j1000

Hi, i have a problem when i tried to upgrade mi BIOS with the sp6500.exe, but it crash, and my laptop doesnt start anymore. i Tried with a usb and the HP TOOLS and my laptop still dead....
I have a Chipmax 2 of EETOOLS, so i can reflash the w25q64fvsig chip whit the bios file (*.bin or *.fd) but the files i got from HP.com doesnt work (01961.bin and 01966.bin) , i think it must be encripted, decripted or assemble with some algorithm, because i have 2 pairs of files, (01961.bin & 01961.s12) and (01966.bin & 01966.s12)
The question is: how i get the *.bin for reflash the chip w25q64fvsig through these combination of files? Can any one solve this little problem?
I need just the instrucctions for assemble this file, and the problem is solved!
Thanks, and best regards!

When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer, inside the battery compartment or on the startup BIOS screen. Please DO NOT include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
Please see HP Notebook PCs - Restoring the BIOS, which states you may be able to create a "USB key with an HP_TOOLS volume" to flash the BIOS. Please see http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/How-to-use-the-HP-BIOS-update-uefi-utility/... for detailed step-by-step instructions that can be used to create the "USB key with an HP_TOOLS volume". You may be able to skip "Step 4". Assuming you have an HP ENVY 15t-j100, please see the HP ENVY 15t-j100 Quad Edition CTO Notebook PC Drivers page for the proper downloads needed for this procedure.
It doesn't appear that there are any BIOS updates for any of the 15t-j100 laptops... select, quad, ts, etc. This may be where your issue started.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

BIOS update problem with satellite C660

I have a satellite C660, and was sent a ' ''BIOS update C660 Version 1.80'', but when I try and install it this message comes up:
''THE PROGEAM WILL BE CLOSED
There is an erroroccured,please check the below items.
BIOS version above 180
Battery capacity more than 10%
AC is attached''
The AC is attached and there is also plenty of battery power, so what more can I do ?
Solved!
Go to Solution.

Hi Please post your full model number found on the bottom of your lap top. Does any one ever read any of the messages posted before posting a new message??
Dokie!!
IMHO if your not having a problem, you don't need to up date the BIOS. That is a very serious procedure and can end in a bricked PC if not done exactly right.
Dokie!!
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.
Attachments:
Capture40.JPG ‏366 KB

Equium A60 BIOS Update Problem

Hiya All.
I wonder if this Community can help me?
I have been trying for ages (weeks) to try and flash my BIOS with an upgrade for my Toshiba Laptop. It is a Toshiba Equium A60.
I can get it to load Windows 98 (except that it tells me that the USB devices wont work because of conflicts in the BIOS)
My friend has exactly the same Laptop, and the BIOS Version is V1.9 and mine is V1.65 To me, this very simply means that mine is out of date!
I have downloaded the newest BIOS Version from Toshiba’s website, and they say to execute the .exe file by using 1.4 Floppy Drive. This I do not have !
You can also execute this file in Windows, except that in Windows 98 it tells me I have an error! “Failure_DLL DetecChipset”
I have Googled this, and the only website that has the same error code is in German! And although Google will let you translate it, it don’t tell me anything!
As a last resort, I thought I could burn a CD, make that into a bootable disk, and add the Toshiba file to it.
Tried this with BartsPE but this is based on Windows XP and I cannot load XP, it gets as far as the XP Logo, then freezes. This is why I suspect the BIOS requires an update.
So, after more Googling, I have finished up at this website, hoping to make a Boot Disk, with the Toshiba Flash Files attached, but it has to be done in “Windows 98” and not XP
So………… that is my problem, anyone have any ideas please?
My mail if you wanna suggest any fixes [email protected]

Hi Conrad
Can you please tell me why you made BIOS updates? Did you have any problems? I use my unit almost two years and I didnt make any BIOS update till now. If everything works well it is not necessary to make any update except for some Microsoft updates that make OS safer. Dont make any update if it is not necessary.
Anyway, I am very confused with your issue. Normally Recovery DVD must not be updated. BIOS updates are useful if there is some hardware conflict or problem and not problem using OS or any software.
It will be interesting to know why you make recovery procedure every time after BIOS update.

G580 Bios update problem

NooR92 wrote:
Hi, i bought lenovo g580 when i try to go to bios, Boot, i have UEFI Enabled but i don't have legacy support option!! and and boot menu! and EFI unavailable!? i put this picture from my laptopCan anyone help please ? regards.Legacy boot options will only show up if you hightlight the UEFI boot mode and press enter to change the value. At that point you will see choices that include "Legacy Support:. UEFI and EFI will not be enabled at the same time, together so your screen display is as it should be when set to UEFI boot mode control. I would suggest some reading and research into the differences to gain a clear understanding of the options.

acbraddie wrote:
i tried doing this but the problem is I cannot change any settings in the bios menu which appear by tapping F2 continuously while booting the laptopHere is what i tried1. I tried entering bios menu by F2 which worked but i cannot change any values2. A fresh install of windows not working as dvd-ram, hdd, usb boot arent showing in the boot list3. Even onekey is working but there's not much help...so my lenovo G580 has become uselessany help will be appreciatedThe correct answer is determined by which motherboard is used in your notebook computer. If you are in your BIOS setup screen, on the main page you will see four entires at the top.Product Name::BIOS Version:EC Version:Lenovo SNThe BIOS Version, EC Version and Lenovo SN will help us determine which BIOS update we should choose between 2 different versions depending on the manfacturer of the motherboard. The Serial number will tell us what we need for discovering the manufacturer information. A “WBxxxxxxxx” or similar serail number indicates the motherboard is Wistron. A “CBxxxxxxxx” or simialr serial nubmer indicates the manufacturer is Compal. Additionally the Wistron motherboard BIOS version will be simialr to 62CNxxWW, Compal BIOS version number will be simialr to 5ECNxxWW. Once you have determined which motherboard is present you can look for and download the proper bios updates from Lenovo support site. As another option you can call Lenovo tech support, provide them the serial number and have them assist you with the process.

VGA Bios update problem

Similar Messages

Maybe you are looking for