VGA Display Adapter; Extended Desktop?

I have a iMac G5 (iSight) and run the latest version of Mac OS X Leopard. If I buy a "VGA Display Adapter" will I be able to use my spare VGA display to extend my desktop? Or is the adapter strictly for mirroring?

Extending the desktop is disabled in firmware on an eMac, iBook, and PowerPC iMac.
(34422)

Similar Messages

Apple VGA Display Adapter extend desktop?

If I buy the Apple VGA Display Adapter will I be able to extend the desktop on my iMac G5?
Thanks

All good reports on MacUpdate.
And there don't seem to be too many compaints on the Forums.
mrtotes

Mini DisplayPort to DVI + DVI to VGA Display Adapter, will it work?

Hi,
I have a MBP, and I have just purchased an apple Mini DisplayPort to DVI adapter.
I want to connect it to a VGA port.
Can I buy an Apple DVI to VGA Display Adapter and connect it to the connector above.
Will that work? Any one with experience who could advise me on that?
Thanks.

This does not work, because the Mini DisplayPort to DVI adapter has a DVI-D port that transmits only digital signals. VGA uses analog signals.

VGA Display Adapter doesn't fit

I have a Intel Core 2 Duo imac and recently order/received the apple VGA Display Adapter-Gen ACCS to hook up another monitor. The problem is, it doesn't fit in my imac. The Apple store specifically says it is designed for Intel Core 2 Duo. What is the problem? Do I need another device to hook my 2nd monitor up?

you need this adapter: http://store.apple.com/us/product/M9320G/A
make sure you are plugging in the correct way.
I beleive you have the first gen Aluminum, correct? - http://support.apple.com/kb/SP16

HP Slate 500 and HP HDMI to VGA Display Adapter (NP031AA)

The specifications page for the HP HDMI to VGA Display Adapter (NP031AA) (Link) doesn't list the HP Slate 500 as a compatible device in the campatible products list (Link).
Do these two products work together?
What VGA resolutions can I project using this cominbation of products? Am I limited to 1024x600? or 1024x768? or does it support displaying higher resolutions?
I'm thinking about making a purchase but I don't want to get the adapater if it isn't going to work.
Thanks,

Yes an HDMI to VGA adapter will work fine. Keep in mind it will not carry audio but neither did your old vga connection so I am assuming it is not a problem.
You would find an HDMI to VGA at any Best Buy or you can order on one amazon.com such as here:
http://www.amazon.com/BestDealUSA-Adapter-Converter-Laptop-NoteBook/dp/B007PLL4CK/ref=sr_1_2?ie=UTF8...
Connect the projector and use the Windows key at the lower left of the keyboard and the p key at the same time and it brings up a "projector" console that lets you easily switch from laptop to projector to laptop + projector.
If this is "the Answer" please click "Accept as Solution" to help others find it.

VGA Display Adapter to HDTV

I purchased a VGA display adapter from Apple. I want to connect my iBook to a HDTV with HDMI interface. What cable do I need to connect the end of the adapter which appears to be a serial connector to the HDTV? Thanks for any assistance.

I would use the Apple mini-DVI to DVI adapter and then get a DVIU to HDMI cable from a local retailer. They are also available online from a ton of places - and probably at a lot lower price.
There really is no need to involve VGA when you would need another adapter to go from VGA to DVI, then the cable to go from DVI to HDMI. I would take that adapter to your local Apple Store and see if they would do an exchange for you.

Mac Mini (mid-2011) dual display with extended desktop

Can Mac Mini (mid-2011) dual display different picture on HDMI TV and DVI monitor. I can only get it to mirror and not display different programs or extended desktop. Can i "extend" instead of "mirror"? and how

Hi David it should...
Display Support:
Dual Displays
Resolution Support:
1920x1200*
Details:
*This model simultaneously supports 1920x1200 on an HDMI display or a DVI display using the included HDMI-to-DVI adapter and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600*
Details:
*This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
Are you using splitter maybe?

Airplay display issues: "extend desktop" not working properly. Secondary display continues to mirror.

Whenever I turn my airplay display on and set it to "extend desktop," my secondary display (TV) continues mirroring my mac book pro (hereinafter MBP). It doesn't fully mirror my MBP, but my secondary display registers every time I switch between my desktop 1 and my full screen apps. Moreover, When I do switch to a fullscreen app on my MBP, I get a blank (blue-ish) screen on my TV.
Any solutions!?!
Additionally, "extended desktop" for my Airplay display worked properly when Mavericks was first released.

Try this:
Click on the Apple TV Icon on the top toolbar
Then, select "Mirror Built in Display" instead of extend desktop
In the same menu under "Match Desktop size to:" select "Apple TV" (or keep it on "built in display if that works"
This solved a similar problem for me.

Using iMac display as extended desktop?

Hi,
is it possible at all to connect a MacBook to an iMac display to extend the desktop (or mirror)?
Thx
JP.

Hi,
yep it works with one of my laptop, but not the other one for some reasons... still working on that.
Thanks
JP.

How do I connect a Apple VGA Display Adapter to my iMac 2 GHz Intel Core Du

I can connect the PC VGA side of the adapter to my external flatscreen monitor though for some reason can't attach the mini-DVI to the back of my iMac. The connection just doesn't fit which is odd since they both carry the same logo. I looked online to see if I needed a special cable to connect the adapter to the back of my iMac with no such luck. What do I do?

I understand your caution, but the symbol next to your Intel-based iMac's mini-DVI port designates the port as a display connection, while not specifying the exact type of display connection.
I can confirm that the same symbol that you see next to your Intel-based iMac's mini-DVI port is also seen next to mini-VGA ports on iMac G5 models as well as on iBook G4's.
The mini-DVI video display connector that you need is a 32-pin rectangular connector, while the mini-VGA connector that you have is a 14-pin rectangular connector. Looking inside each, it's possible to count the pins. If there were accurate external photos not too small, you could tell there's a difference between the two adapters by comparing the shape of the mini ends. Without side by side display, however, they are apparently easily confused, as an Apple Store employee once sold me the wrong one for my iBook.
The M9320G/A adapter you need won't connect to the M8639G/A adapter you have, but is to be used instead of it, as it will connect to the Mini-DVI port of your Intel-based iMac (as well as the MacBook, and 12-inch PowerBook G4). The Intel-based iMacs don't have a mini-VGA port.
Matching your proposed connection, the July 11 Apple Store review by "MV" of the M9320G/A adapter said: "mini-DVI into the back of my Imac, plugged the VGA into a VGA cord...".
Your M8639G/A adapter connects only to the mini-VGA port on the eMac, iMac G5, 12-inch PowerBook G4, or iBook, but will not connect to any Intel-based iMac port.
Message was edited by: myhighway

Macbook dual VGA display output

Hi, I was wondering if there is a way to use 2 VGA displays in extended desktop mode with my Macbook. I currently use my MacBook (with lid open) with a 21" external display, but just found an old 18" monitor which I would also like to use. I am willing to use these 2 displays with my MacBook lid closed.
Is it possible to use this setup with a VGA splitter cable perhaps, or do I need to buy a USB to VGA cable/adapter (and if so, can you recommend one)?
Thanks!
Adam

In that case, is there any USB to VGA adapter for mac that you can recommend? I believe they have their own display cards in them.
Thanks
Adam

Streatch Moniter versus extended desktop

Is there any kind of app that will manage your two displays to set them up in a "Streatch display" setting versus an extended desktop setting? Thanks!

The iSight iMacs had a mini-VGA connector, so you can search the Apple Store for the "Apple VGA Display Adapter" which is $19. I understand that it is pretty short, so you will likely need a VGA extension cable that you can get locally at Best Buy.
I would post a link, but the Apple Store links time out and would be of no use. Sorry.

IMac Extended desktop & NTSC Monitor possible?

Is there a method to jointly connect a second VGA monitor for extended desktop support along with a NTSC monitor (TV) via S-Video?

duane i beg to differ. heres a download for most newer macs to do it. http://www.rutemoeller.com/mp/ibook/ibook_e.html although be warned applecare will not cover anything screenspanning doctor screws up. not that it has. i have used it on my imac for about 5 months and my youth directors ibook g4 1ghz. its great

Can my extended desktop on my iMac be treated as a separate desktop vs just an extension ?

When I plugged in an external monitor via thunderbolt to DVI cable, I was hoping to gain an additional view of the various desktops. instead I got an extension of my current desktop, which is really cumbersome to move through various appellations i have open, e.g. Fusion 6.0 seems to want to stay on all the desktops I swish through.
Mark

Hi markpaq,
Welcome to the Apple Support Communities!
With an external display, there are two different arrangements you can set. You can either use a mirrored display or extended desktop. Please use the attached article for more information on configuring your external displays.
OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
Have a great day,
Joe

Extended desktop lows resolution

Hi all.
First of all i would like to thank you for helping people like me to solve their problems all around the world.
Did someone experiencied this?
I couldn`t set an 85HZ when my resolution was at 1024 * 768 and 32bits color quality. So I tried doing everything I find in this forum and in the nforcershq forum... nothing seemed to work... and finally........ in one try of uninstalling and installing de nvdia drivers, I uninstall the second monitor listed in the device manager, so when I went to the display properties I didn`t have the second display active(Extend Desktop in this device) and 1024*768*32bit*85hz AVAILABLE. There was the simple answer, when activating the second device(TV in my case)the first device(monitor SyncMaster753DFX)refresh rate lowed from 85HZ to 60HZ with no other choices.. the only thing I could do was to turn to 16 bits color Quality to get back the 85Hz rate.
Does someone understand what is happening?
Does anyone know if its possible to correct this situation?
Tanks in advance.
I have a K7N2G-L and 512DDR266PC2100(spectek) in slot 3, XP SP1

if i understand correctly, yes this did happen to me. i believe this happened when i installed the gpu drivers from the msi site. my refresh was stuck at 60hz. i was able to solve it by changing from -clone- to -standard- in display props. now use nvidia unified drivers with no above problem.

VGA Display Adapter; Extended Desktop?

Similar Messages

Maybe you are looking for