VGA Driver for Vista - Satellite L10

I have installed Windows Vista Final (By MSDN Subscription at my IT firm) on my Toshiba Satellite L10-209 laptop. Everything is running excellent except that the Display adapter (VGA) is not defined properly. The VGA adapter is a 128MB, but the system information under "Accessories" displays the VGA RAM as "Not Supported". I think it needs a new driver. Is it correct? And where can I find the Driver? Please help! ...

Hi
I think you dont need new graphic driver. In my opinion you have misunderstood something and its a wrong interpretation of this message.
The Satellite L10-209 was delivered with a shared memory graphic card and doesnt not support an own memory.
Therefore I think the message VGA RAM - Not Supported" means that the graphic card doesnt not support an own memory but uses the notebooks main memory.

Similar Messages

Can not find VGA driver for my Satellite A30-604

I cant find a VGA driver for my SA30-604
Help is neaded......

Hi
What??? I cant believe that.
On the Toshiba page you can find the display driver!!! The driver was definitely published!!
Toshiba published 2 drivers for XP (ATI and Intel) and 2 drivers for W2k (ATI and Intel)
So check it out!

Need swappable CD rom drive for the Satellite 230CX

After hours trawling the net, I still haven't found the part number for the swappable cdrom drive for the Satellite 230CX.
Sadly a couple of sites say it's the PA2659U / XM-1402B, so I bought one from eBay, and it doesn't fit!
Any help would be appreciated with either the straight answer or a pointer to a parts list.
Cheers.

Its an oldie.
I dont found any information about this notebook.
But usually it should be possible to order the supported and compatible CD rom part from the Toshiba service partner in your country.

Vga drive for windows 8

hello
i need vga drive for ATI Radeon HD 6320
window 8 - 64 bit
please help me to find this drive

http://support.amd.com/us/gpudownload/windows/Pages/radeonaiw_vista64.aspx

Need a VGA driver for lenovo 3000 H100 5310-2AA.. pls need some help here..

Hi,
is anyone of u have the installer for the VGA driver ( for lenovo 3000 H100 5310-2AA) ??
or if u know where to download it pls tell me..
I tried download from the lenovo's official website but it didn't work, I dunno why?
it says "the nvidia setup program couldn't located any driver that are compatible with your current hardware. Setup will now exit"
I confuse now.. I didn't upgrade or change any hardware since I bought it..
thx

you seem to install Nvdia when you must have been using intel's drivers.
check out this link once
http://www-307.ibm.com/pc/support/site.wss/product.do?doccategoryind=121202&template=/productpage/la...
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Still no working driver for Vista

Heck, at this rate we may be up to RC or RC2 before a working driver is released. I stated in another post that I would not post anymore on this board until a working driver for Vista was released, but was shocked to see that the driver for my Audigy 2 has not been updated and the release schedule still states TBA!!!
For those who are interested, the Vista Transformation Pack #4 provides the best of both worlds. A very similar look to the Vista GUI and the updates, drivers and support that Windows XP offers.
Honestly, why spend over $00 for a sound card and then lose most, if not all, of its functionality just to say that you are running Vista. I know that Vista is neat, but it is a resource hog and who wants to use their motherboard's onboard sound?

Actually the latest Audigy 2 ZS driver for XP works on my Windows Vista Beta 2 build 5456.5.
I've since reactivated UAC, but not driver signing since several drivers are unsigned.
But disabling UAC got my whole Audigy 2 ZS Platinum Pro Creative cd installed, with the exception of the DVD-Audio Player. I then installed all the software updates (except the DVD-Audio), and then the latest driver for XP and the AudioConsole that is part of the install. I did need to run the driver setup twice and let it reinstall AudioConsole over the one it installed the first time.
All works except Soundfont Banks. They don't load, the Soundfont Bank Manager will keep trying to if I start it, but it's a no go. Windows uses only the Microsoft Roland Midi Synth (but it works).
All EAX stuff in AudioConsole works. The software from the cd works too, but since alot isn't being used they're mostly useless. I just use Windows PlayControl and Creative AudioConsole to control stuff.
There's a problem with Windows Media Player where visualizations only play with cd's, but not mp3's from the hard dri've. If I toggle the Audio Quality from, say, 6/44,000 to 6/48,0000 (where I leave it), then the visualizations will show for one song then deactivate again. Kind of given up on it as I'm not about to toggle that and reset everything for every song.
Haven't messed with MediaSourcePlayer yet, except to open it and turn off all the remote control stuff.
Played some games, some music, some DVD's. Stuff sounds fine. When I plug in my headphones it switches my 2. speakers off correctly.
I did need to install PowerDVD 6 Deluxe to get commercial DVD's to play. (Adult movies played fine as they're not copy protected.) Weird DRM error in WMP when it tries to play normal Hollywood DVD's. But PowerDVD plays them fine. The PowerDVD 7 Upgrade removes 6, then fails to install. So I needed to reinstall 6, then update it to 2003e again. It works.
So, it'll be nice to get drivers and software that completely work but until then the XP drivers and most of the software does work.

Tecra S10-106 - 3G driver for Vista Ultimate 64bit

Hello,
I am owner of a Toshiba Tecra S10-106. Due to the fact that Vista Ultimate 64bit is much faster as Vista business 32bit, I would like to use Vista ultimate 64bit as operating system, but I can't find the 3G driver for Vista 64bit. All drivers can be downloaded from USA in english and can be used in german, only the 3G driver is missing. Can somebody else send me a download link or tell me where I can find a suitable driver for Vista 66bit?
Thanks in advance.

Hi
To enable the card you will also need to install the 3G RF Power control utility which is here at http://support1.toshiba-tro.de/tedd-files2/0/3grf-en-20090217134719.zip.
That is only half the story as I think you also need to install the Value Added Package here http://support1.toshiba-tro.de/tedd-files2/0/vap-en-20090217134137.zip as this then enables the hotkeys to turn on and off the 3G wireless card.
Hope that helps.
Regards
Phil

Neer WXP RAID and SSCI driver for my Satellite C650-10K

Does anybody know where I can find the Raid and SSCI driver for my Satellite C650-10K?

Hi buddy,
Are you sure that you need RAID or SCSI (not SSCI) driver for Satellite C650?
As far as I know this model doesnt support such hardware
I think you need drivers for SATA controller. This package is called Intel Storage Manager and can be downloaded on official Toshiba website.
Here is an interesting article about XP installation with SATA drivers:
http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm

Compatibility of graphics driver for vista with xp

I have a HP Pavilion a6320in desktop. It came installed with Vista OS. I have now installed Win XP. Will the graphics driver for Vista: NVIDIA GeForce 6100 nForce 420, 6150 LE, 6150SE nForce 430, 7100/NVIDIA nForce 630i and 8200, also work for Win XP?
This question was solved.
View Solution.

luit wrote:
I had simply pasted the name of the graphics driver from the HP download page, that's why the names of all the differing devices appear.
I had replaced the original motherboard MCP61PM-HM (Nettle2) with ECS GeForce6100PM-M2. I tried installing winXP, but the graphics were hazy and performance very slow. Somebody suggested I need to install the graphics driver. Will the graphics driver you suggested work?
OK.
Now that is new information that you should have shared earlier with us.
You need to use all of the drivers that are available at the ECS website for the ECS GeForce6100PM-M2 motherboard. Do not use the HP drivers for the replacement motherboard.
FYI ..Once you replace the motherboard with a different brand than delivered your desktop PC ceases to be an HP desktop PC.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Satellite A60-156: Where to find graphic driver for Vista

I've recently upgraded my A60 with new dvd, memory and hard drive.
Upgraded to Vista and all works perfect except i cannot find an upgrade for my display driver.
Just shows as standard graphics adaptor and i cannot get any 3d functionality on it even for Vista Windows games or screensavers.
Can anyone advise as to where I can get updated drivers for this function? Graphics card is ati radeon 7000igp.
Thanks.

What to say It seems Toshiba page doesnt provide any Vista drivers for this unit.
So you could try to use an graphic driver from the 3rd party website like www.omegadrivers.net
But note; these are not Toshiba drivers and therefore the drivers are not tested on the Toshiba notebooks. You can install it but only at your own risk.
Best regards & good luck

VGA driver for notebook HP 540

is there anyone know VGA driver notebook HP540 for windows 8 ? I have install windows 8 and can not find grapics driver
thanks

I don't like to be the bearer of bad news, but
Windows 8 will find the best available driver for the installed notebook installed graphics solutions during installation.
The only available drivers for your notebook currently provided are for Windows XP and Windows Vista.
Your notebook has no support for Windows 7, so do not expect to find new graphics drivers for Windows 8 at the HP web suport portal for your notebook.
****Please click on Accept As Solution if a suggestion solves your problem. That will help another person facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Nvidia Geforce 8600M GT Driver for Vista

Hi mac-world!
I'm using BootCamp to start Windows Vista on my Mac Book Pro. I recently bought a seperate TFT-Display from Belinea, which I connect to my Mac Book via DVI. This isn't a Problem while using MacOS, but in Vista I can't adjust the resolution of the seperate Display to more than 1024x768 px. I already installed the Belinea Driver, but that doesn't solve the problem.
I am wondering, if I maybe need a driver update for the grafic-card. Unfortunately, Nvidia doesn't provide a driver download, but says, I need to contact my Laptop-Vendor for this issue. I didn't find a driver-download section on this page. Does someone know a solution? Where do I get the new driver?
Thanks in advance
regards
Thorsten

In my case after going through normal Shut Down procedures, I
noted that after I go through normal shut-down-from-Windows, the machine does not power off. I can only turn off the machine by pressing the power switch for a few seconds.
When I do not press this switch, Windows restarts after about ten minutes;
after, however, I receive a brief report (which I never manage to read in full)
informing me that a software may not have been properly installed or that I
need a windows update.
This problem appeared long after I installed all the software that I use,
and I have checked whether I'm fully updated (I am).
Lately when I start-up after experiencing this problem, Windows indicates
that the problem is caused by an NVIDIA graphics driver and suggests that I
check for a driver update. I have tried the NVIDIA Website but there was no
reference to the graphics card installed in my machine, namely GeForce 8600M
GT - I only found a driver for GeForce 8700M GT.
I have since solved the problem as rerported in http://discussions.apple.com/thread.jspa?threadID=1492731&tstart=0
However, I stll wonder why there is no reference to 8600 in the NVIDIA site.

NVIDIA GeForce 8600M GT driver for Vista x64

Hello,
I have an issue with my new MacBook Pro 2.4Ghz 17" that was released on the 5th of June, 2007.
It has NVIDIA GeForce 8600M GT installed on it and I simply cannot find Vista 64 bit drivers for it.
I have tried the latest beta Vista x64 drivers (163.11) downloaded from nVidia's official website. I have tried several previous versions including 100.97 one, which contains drivers for 8600M GT model. But they don't work with me. All the driver installation programs allert the following error and quit:
'The NVIDIA Setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit'.
I also tried Vista 32-bit drivers for 8600M GT. The driver installation program claims the operation system is wrong and quits.
Anybody has the same issue?
Does a working driver of nVidia GeForce 8600M GT for Vista x64 exist at all?
MacBook Pro 2.4Ghz Windows Vista nVidia GeForce 8600M GT

There was one Apple's presentstion where they boot into Windows Vista. So if you claim you can do it why do you forget about Vista x64 customers? I reckon it is because of Leopard that is coming. But it's not an excuse.
I'm currently working in Vista x64 and everything is fine except one thing, I cannot find a working graphics card driver and it is manufacturer's responsibility to provide it. Apple knew there going to be customers who will install Vista x64 on their computers and they at Apple didn't care about it because I guess it's a lame war between you know who.
So why you don't make everything perfect to attract even more Windows customers but instead you hint that you don't care about Vista x64 as you are getting your own 64-bit OS soon. So now they are forcing me to wait having been announced that I can use Vista. But isn't that kind of lame that it's slightly tardy? Why I should wait for Leopard launch if I was insured that Windows will work on my Macbook Pro? Because Apple claim you can run Windows. And don't say it's not official. Who else if not Apple made it possible to run Windows on Mac.
Don't get me wrong, I'm not trying to insult you. I'm just angry that I cannot find a working driver.
Message was edited by: Melnyk

Laserjet 4050n basic driver for vista causes crash on print command

This is a printer that works fine with several windows xp systems on the network, but on this LG LGR40 laptop, the print command causes a bluescreen crash. A previous intsallation of different drivers for vista caused the same problem. The OS is completely uptodate. Pls help!!!
Here's the incident report from Vista:
Product
Windows
Problem
Shut down unexpectedly
Date
29/03/2009 9:33 PM
Status
Not Reported
Problem signature
Problem Event Name:    BlueScreen
OS Version:    6.0.6001.2.1.0.768.3
Locale ID:    4105
Files that help describe the problem (some files may no longer be available)
Mini032909-02.dmp
sysdata.xml
Version.txt
Extra information about the problem
BCCode:    1000008e
BCP1:    C0000005
BCP2:    8CBFBC49
BCP3:    A72CFC98
BCP4:    00000000
OS Version:    6_0_6001
Service Pack:    1_0
Product:    768_1

The printer is on the network, so it's directly to IP address.
The driver was installed as admin user
No problem with the printer for >8 years.
No other vista systems.

Missig Driver for Vista

I have an old Tungsten T3 and just bought a new HP with Vista home. I have download the new vista desktop manager. Everytime I try to sync the computer tells me it needs to look for a "driver" for a new device. My previous laptop also had vista and I did not have this problem. I am using a new USB cable. Could this be the problem? Or am I missing a driver patch?
Post relates to: Tungsten T3

Hi, and welcome to the Palm Community Forums.
By "new vista desktop manager" do you mean Palm Desktop 6.2 by Access? If so, that version is not compatible with the old T3.
If you go to the Palm Desktop download page, select your device and Windows Vista, it will lead you to a downlad of Palm Desktop 4.1.4E. This is the one you should try. Note, the Quick Install tool does not work with 4.1.4E under Vista, but normal data synchronization should.
Post relates to: Centro (AT&T)
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

VGA Driver for Vista - Satellite L10

Similar Messages

Maybe you are looking for