VGA FX5200 T128 (8917) driver to support Linux OS

Hello,
Currently I am install red hat 9.0 (Linux) OS in my PC.
But I encountered problem when detect my VGA card driver.
(VGA FX5200 T128 (8917) driver)
Have anyone encountered before, please advise alternative solution.
Thank you in advance.
Regards,
vivaspeed

Quote
Originally posted by some body
See HERE.
vivaspeed Reply:
Hello,
Thank you of your reply,
but I am confuse which one I need to refer?
My processor is Pentium 4 and my VGA card is MSI FX5200-T128.
So which "Graphics Drivers" I need? Linux IA32 or Linux IA64?
And which "nForce Drivers"?
Should I need to upgrade my BIOS before I install the driver?
My motherbroad series is 875P Neo Series.
can please guide how to upgrade by manually (not LiveUpdate).
At tne meantime, I found another VGA driver from "www.viaarena.com/?PageID=296"
but is only provide for "AS IS" type. May I know is "MSI FX5200-T128" as same as "AS IS" type?
Thank you in advance.
regard,
vivaspeed
[email protected]

Similar Messages

  • MSI FX5200-T128[8917]Has 5200Ultra Chip Will it need AGP Voltage rise

    Hi,
    Some where in this forum i saw that someone is talking about after removing the heatsink of 5200 and seeing it is 5200 Ultra ...It happened to me too...  
    My GPU is ought to be 5200 but under the heatsink it is 5200 Ultra
    soo i need help about that how can i found vga bios for to turn its bios to 5200 Ultra's  
    My xp drivers saying it is 5200, after i updated bios will it be turn to 5200 Ultra...?? it must be but is there any compability issues known by anyone ??
    And it is 5200 Ultra why it doesn't needs external power input[From PSU] like other Ultras have ?
    If i rise the AGP voltage will it be helpful to use all power of 5200Ultra ?
    thanx for your time ...
    Sorry for my english

    Since this issue is regarding a VGA card I'm moving your thread to the VGA Forum...
    Bonz

  • MSI FX5200-T128[8917]Has 5200Ultra Chip

    Hi,
    Some where in this forum i saw that someone is talking about after removing the heatsink of 5200 and seeing it is 5200 Ultra ...It happened to me too...  
    My GPU is ought to be 5200 but under the heatsink it is 5200 Ultra
    soo i need help about that how can i found vga bios for to turn its bios to 5200 Ultra's  
    and my xp drivers saying it is 5200, after i updated bios will it be turn to 5200 Ultra...?? it must be but is there any compability issues known by anyone ??
    thanx for your time ...
    Sorry for my english

    I doubt you want to do that considering some of the parts on the board aren't the same as an Ultra board and so if you flash it to Ultra BIOS then you'll render it dead...
    It's your board tho so if you feel froggy dive in I'm game to watch! heheheheh
    You can't find a BIOS file for these except thru LiveUpdate unless someone saved it before the flash...
    Bonz

  • FX5200-T128 Screen flash on log in....

    Hi there,
    Just purchased the MSI FX5200-T128 card and installed with a new installation of XP and supplied drivers.  Upon log in with any user the screen flashes twice, then logs in.  Also when I go to the display settings and go to the FX5200 tab the screen flashes.  Windows update indicated that I needed a new driver signed in July (I think) so I downloaded these.  These were 45.23.  After installation of these, hitting the display manager toolbar icon causes the screen to flash, as well as retaining the previous flashing problems!
    This morning I have downloaded the 45.33 drivers with the same results.
    Any ideas why my screen keeps flashing!?
    Thanks in advance,
    Mark
    Athlon XP 2000
    Gigabyte GA-7VRXP
    1024Mb PC2700
    MSI FX5200-T128

    I have another problem.  I know that support for this card is poor with the current XFree and have downloaded the run file from Nvidia.  I have a new HD and started to boot Mandrake 9.0 from CD.  It got as far as hitting enter to start the install....then the screen went blank and that was it....
    So now I have problems in both Linux and WinXP!!
    Any help would be much appreciated,
    Mark

  • Complete FX5200-T128 failure?

    I've just tried installing an FX5200-T128 into a PC266 motherboard (using XP1600+ processor).
    The driver install was fine but the end result now is that when I boot I have about two seconds of 640x480 then the signal stops (screen goes blank and says "no signal input").
    I have absolutely no idea of how to proceed - the machine still works fine when booting from the old PCI card (which I removed before starting the install - the machine won't boot with both in place) or the built in VGA slot.
    I've tried setting the PC's BIOS to using PCI with an IRQ, PCI without and IRQ and just using the "built in AGP" option all with the same result.
    Any ideas very welcome.
    Thanks

    balance,
    Have you try to insert your AGP Card to other system ?
    maybe is the AGP Card problem.
    Regards - Porsche -

  • FX5200 T128 and DVI Port :(

    Dear Friends
    I have a MSI GeForce FX5200 T128 (128MB) VGA card.
    It has only D-Sub Port(DB 15-Pin) and a S-Video port and DO NOT HAVE A DVI Port :(
    But in the manual its written that
    "Support for dual-link DVI for compatibility with next-generation flat
    panel displays with resolutions greater than 1600x1200 without
    the need for reduced blanking"
    So, now I'm planning to buy a new LCD/TFT monitor, to take advantage of digital picture through DVI input without converting from Digital->Analog->Digital. SO that I'll not loose any quality.
    So Is it possible with my card ?
    I think its not possible as it does not ve a DVI port.
    Very bad product .................

    Thank you all for your support.
    But, it has been writen in the FX5200 T128 section/features.
    So I thought .......
    Anyway seems I ve done a bad investment  Any exchange offer from MSI for Asian customers  in future 

  • Jabber 4.4 "Graphics card or driver not supported" error on one machine but not another.

    Hi, I looked at the KB document but the email link on it no longer works.
    I have two end-users using Jabber 4.4 on identical machines, same specs, same driver build and OS image. One gets the  "Graphics card or driver not supported" error, the other does not.
    We have two DellOptiPlex 7010's,
    Both had 2 instances of AMD Radeon HD 7470 - they are dual monitor machines.
    In both cases the driver version 8.922.0.0, Driver Date 12/6/2011. This is the latest Dell has on their website.
    On one machine when I run a fresh install for Jabber for TelePresence 4.4 it works fine. But on another the user first gets
    "supportabilitytest.exe has stopped working
    A oriblem cause the program to stop working correctly. Please close the program."
    Then when that's closed out we get:
    "Graphics card or driver not supported!
    New features in this version of Jabber Video are not supported by your computer's graphics driver.
    Update to the newest graphics driver available and run Jabber Video again."
    I can't believe it's just a matter of upgrading the drivers because in this case one machine with identical drivers works.
    I appreciate any insights, thanks !

    Hi ksouthall,
    It sounds like the openGL supported version did not install on the one that is failing.  There isn't much we can do regarding that error.  Best practice is to always upgrade to the latest manufacturer's available driver.  Client requirements are below.
    Windows 7 (32-bit or 64-bit), Vista, or XP (SP 2 or newer), with OpenGL 1.2 or newer.
    For 720p HD video calls, Intel Core2Duo @ 1.2GHz or better.
    For VGA video calls, Intel Atom @ 1.6GHz or better.
    Webcam, built-in or external. You need an HD webcam if you want other callers to see you in HD.
    Broadband Internet connection with a recommended bandwidth of 768kbps upstream and downstream. You need about 1.2Mbps upstream and downstream for 720p HD video calls.
    Regards,
    Jason

  • FX5200-T128 AGP (Tv-Out)

    Hello
    Hopefully someone can answer my question since MSI doesnt return my emails or my phone calls.  This makes me want to spend my hard earned money buying another MSI product.
    I just built myself a new system  and cant figure out why I am having the problems with this video card. I am using this video card until I decide which one to upgrade to.   A little about my system first.
    CPU:  AMD XP 3200+
    Ram: Cosair (2) 512meg) chips PC3200 (Mastching Pair)
    MB: Gigabyte 7nnxp (Latest Bios)
    Sound Card: Sound Blaster Live 5.1
    HD's: 85, 120, 160 gig Maxtor Drives
    MSI FX5200-T128 (Latest Bios)
    KDS VS-195 19 inch Monitor
    I am running the Latest Bios and software MSI FX 5200 Drivers 53.03 (Nvidia Drivers) for the FX5200-T128 AGP 8X video card and still have these problems.  
    The problems I am having probably have something to do with the refresh rate but i'm really not sure just guessing. The taskbar (down below) turns a solid color and you can't see the icons on it when dong different  tasks on the computer. Evently it goes back to normal and everthing goes back to normal.  When I first boot the computer up I get a white background (which doesnt bother me to much).  Plus I use Photoshop a lot and when I am first booting that up the screen goes to white but after its loaded up I see everything I need to see.  If I am in Photoshop doing some editing the whole screen turns white and usually the only way around it is to press the esc key and sometimes I loose my work and have to start over. If I go to the control panel then select the display icon/settings/advance/troubleshoot/hardware acceleration.  If I lower the performance on the card way down then i don't have a problem but why would I do this.  
    Any help would be greatly appreciated
    Michael

    IF you had done a search and some research on that card you would see that it's a glorified GF2 440 MX equivelent and is not a high end video card for much else than a normal business workstation...graphic editing wouldn't be my first choice to do with that card...
    Now you could have a bad motherboard as well...power supply could be light on it's output to power your components...it could be a lot of different things...
    Need to troubleshoot your system with known good parts of the same manufacturer and chipsets...
    Good Luck!!
    Bonz

  • Concerning FX5200 T128 with and without fans!

    I have seen the MSI FX5200 T128 VGA card in two shapes: one with a heat sink, and another, a bigger one, with a fan or what's called Twin Flow.
    Both of them are MSI GeForce FX5200 T128!
    What is the difference between them?

    One with bigger fan is overclocked and with temp sensor.

  • OpenSQLException: JDBC driver not supported?

    Hi @ all,
    I need to connect to a DataSource with the WebAS 7 via SQLJ. As I try to connect to it with the SQL Engine set to "Vendor SQL" I get:
    "The given connection "com.sap.engine.services.dbpool.cci.ConnectionHandle" is not an Open SQL connection"
    As I try to get a connection to the dataSource via SQLJ with SQL Engine set to "Open SQL" or "Native SQL", I get the following Exception:
    ResourceException in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException thrown by the physical connection: com.sap.sql.log.OpenSQLException: JDBC driver not supported for MS_SQL_SERVER database.
    How can I get the SQLJ- Support?
    Kind regards,
    Uwe
    Message was edited by:
            Uwe Kunath

    Hi Uwe, all,
    for using Native SQL/JDBC or Open SQL/JDBC, the database itself and the JDBC driver must be recognized as being in the supported set. The answer to that depends on what you mean in detail by "Web AS 7". Roughly speaking, it should be the JDBC driver released by Microsoft.
    Open SQL/SQLJ is only available with a Open SQL/JDBC data source. Hence, there is no way around using Open SQL/JDBC.
    Now, Open SQL/JDBC and Open SQL/SQLJ both requires tables (and other database objects) to be deployed via the Open SQL for Java Dictionary. Up to and including WebAS Java 7.1, the Open SQL/Dictionary supports deployment to the system database, i.e. the database (and schema) used by the installed server itself.
    Given the above, the JDBC driver for a Open SQL/JDBC data source must already be present, because it must be the driver used by the server itself. When defining data sources, it is referred to as "system driver".
    This leaves us with a Open SQL/JDBC data source to the system schema. You can then also consider to establish a data source alias to the server's system datasource.
    Hope this helps. Best Regards, Dietamr

  • Error while trying to install NI-VISA driver on SUSE LINUX 11.1(The version of gcc in the path does not match the version of gcc used to compile the currently running kernel.)

    hi i am trying to install NI-VISA driver on SUSE LINUX 11.1.
     the error message it shows is
              ******************************** ERROR ****************************************
    * The version of gcc in the path does not match the version of gcc used to    *
    * compile the currently running kernel.  This can cause unpredictable         *
    * behavior in kernel drivers and should be fixed.                             *
    * gcc version: Linux)                                                          *
    * kernel compiled with: 4.3.2                                                 *
    ******************************** ERROR ****************************************
    my kernel source version is 
       linux-8nes:/home/admin # rpm -qi kernel-source
    Name        : kernel-source                Relocations: /usr/src
    Version     : 2.6.27.29                         Vendor: openSUSE
    Release     : 0.1.1                         Build Date: Sun 16 Aug 2009 03:43:52 PM IST
    Install Date: Sat 24 Oct 2009 02:13:12 AM IST      Build Host: rinck
    Group       : Development/Sources           Source RPM: kernel-source-2.6.27.29-0.1.1.src.rpm
    Size        : 309251954                        License: GPL v2 only
    Signature   : RSA/8, Sun 16 Aug 2009 03:57:25 PM IST, Key ID b88b2fd43dbdc284
    Packager    : http://bugs.opensuse.org
    URL         : http://www.kernel.org/
    Summary     : The Linux Kernel Sources
    Description :
    Linux kernel sources with many fixes and improvements.
    Authors:
        Linus Torvalds <[email protected]>
        see /usr/src/linux/CREDITS for more details.
    Source Timestamp: 2009-08-15 17:53:59 +0200
    GIT Revision: 8a413546901c407e96f7fba18574cceeb40452af
    GIT Branch: SLE11_BRANCH
    Distribution: openSUSE 11.1 
    i had also installed GCC 4.3.2.
    it shows the error message as i had posted.
    please kindly help me on this.
    Thanks and regards,
    P.karthick

    Check this solution

  • Online Backup of supported Linux VM on Hyper-V 2012 R2 / SC DPM 2012 R2

    Hi,
    I'm trying to set up a lab environment:
    Win 2012 R2 with Hyper-V
    running 2 Linux Machines:
    Linux2 - CentOS 6.4 with manually installed Linux Integration services 3.4
    Linux3 - CentOS 6.4 without LIS (should be already included in CentOS)
    Another machine running Win 2012 R2 Server with SC DPM 2012 R2
    but both VMs show as "Offline" when trying to back them up via DPM. Tried local Windows Server Backup with the same result.
    I am able to backup the VMs "offline" (pausing the VM, taking snapshot, resume VM) but according to MS, SC DPM 2012 R2 should be able to do Online backups for supported Linux VMs (http://blogs.technet.com/b/virtualization/archive/2013/07/24/enabling-linux-support-on-windows-server-2012-r2-hyper-v.aspx)
    The only things in the EventLog are these:
    A storage device in 'Linux3' loaded but has a different version from the server.  Server version 6.0  Client version 4.2 (Virtual machine ID 4F5CDDD8-B855-41CF-83B2-772C1B99090D). The device will work, but this is an unsupported configuration.
    This means that technical support will not be provided until this problem is resolved. To fix this problem, upgrade the integration services. To upgrade, connect to the virtual machine and select Insert Integration Services Setup Disk from the Action menu.
    Any Ideas ?
    Thanks

    Hi,
    That list would need to come from the Windows hyper-v group, they are responsible with adding the feature to the integration components for various Linux OSes.  DPM just backs up whatever the hyper-V writer presents to us, if the guest supports
    online, we back it up online, if not hyper-V saves the guest before the VSS snapshot is taken and DPM takes the backup from the saved state.
    NEW NOTE ADDED 1-29-14: Windows group just released “Linux Integration Services Version 3.5 for Hyper-V”. The
    document mentions that some versions of Red Hat and CentOS are now
    supported to do online backup.
    Live virtual machine backup support
    ======================
    RHEL/CentOS 6.0-6.3
    RHEL/CentOS 5.7-5.8
    RHEL/CentOS 5.5-5.6
    ADDTL NOTES: If there are open file handles during a live virtual machine backup operation, the backed-up virtual hard disks (VHDs) might have to undergo a file system consistency check (fsck) when restored.
    Live backup operations can fail silently if the virtual machine has an attached iSCSI device or a physical disk that is directly attached to a virtual machine (“pass-through disk”).
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
    posting is provided "AS IS" with no warranties, and confers no rights.

  • T400 maximum hard drive size supported by BIOS.

    Does anyone know what the maximum hard drive size supported by the BIOS for a T400?
    Solved!
    Go to Solution.

    it doesn't exist yet. You can use any sata hdd with 2.5 inch form factor and 9.5 mm thickness. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Vga standard graphics adapter driver update

    Hi does anyone know where I can find an updated VGA standard graphic adapter driver.? or what make it is?My young one is trying to play Roblox but keeps getting a message that the driver needs to be updated.Also if it is possible to install an other graphics card.

    Hi,
    You need to be running DirectX 9 at a minimum and it's not on your PC per PC image that you posted. You can try installing Directx but I suspect that you might need a video card.  If you need a video card, then it's an older AGP style, 1.5v card that would be rated for Directx 9 and would work with the power supply size in your PC.
    Good luck!
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Where can I find a sql server 2000 driver which supports JDBC 2.0?

    Where can I find a sql server 2000 driver which supports JDBC 2.0?
    Thanks!
    Paul.

    Here is another.
    http://www.datadirect-technologies.com/download/downloadindex.asp
    The JDBC 3.0 driver will work in a JDBC 2.0 environment (i.e with J2SE 1.2 or 1.3)
    provided you use only JDBC 2.0 features of the driver
    "Sree Bodapati" <[email protected]> wrote:
    >
    >
    http://msdn.microsoft.com/downloads/default.asp?URL=/downloads/sample.asp?ur
    l=/msdn-files/027/001/779/msdncompositedoc.xml&FinishURL=%2Fdownloads%2Frele
    ase%2Easp%3FReleaseID%3D38312%26area%3Dsearch%26ordinal%3D1%26redirect%3Dno
    Microsoft.com downloads :)
    http://www.inetsoftware.de/English/Produkte/JDBC_Overview/ms.htm
    www.inetsoftware.de
    are a couple.
    sree
    "pronane" <[email protected]> wrote in message
    news:[email protected]..
    Where can I find a sql server 2000 driver which supports JDBC 2.0?
    Thanks!
    Paul.

Maybe you are looking for