VGA hardware or driver to run Cyberlink YouCam

HP 15-035TU MODEL NUMBERi had very problem cnn43342vm serial numberplease let me know the problem regarding the VGA YOUCAM camera.
 VGA hardware or driver to run Cyberlink YouCam. What should i do

Hi:
There are 3 different varieties of that model #.  Which one is yours?
http://h10025.www1.hp.com/ewfrf/wc/pfinder?cc=us&l​c=en&query=15-035TU+&tool=s-002&dlc=en
What operating system do you need the drivers for?  and for 32 or 64 bit?

Similar Messages

  • VGA hardware or driver to run Cyberlink YouCam. What should i do

    dear sir, i tried to open my youcam webcam (hp pavilion g7) and it is saying i do not have the compatible VGA hardware or driver to run Cyberlink YouCam. What should i do

    Hello Naimesh7996,
    You are stating that you are unable to start your webcam, is that correct? I will be happy to help you.
    Can you please provide the full model of the computer you have, If you are unsure where to locate that information have a look at this link for help if needed.
    Please respond back at your earliest convenience.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • You do not have the compatible VGA hardware or driver to run youcam

    I cant figure out how to fix youcam on my laptop. Everytime I try to open youcam It pops up with "you do not have the compatible VGA hardware or driver to run youcam". What information is needed to fix this problem and what do i need to do to fix it?

    Hi bored55,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you are getting the message in YouCam that" you do not have the compatible VGA hardware or driver to run YouCam".
    If you check Device Manager, you should be able to locate the Webcam and then install or update a driver for it.
    You can run HP Support Assistant to aid with HP updates and drivers.
    Have you tried troubleshooting the device through Windows?
    To assist you further I will require more information.
    What exact model of HP notebook do you have?  How Do I Find My Model Number or Product Number?
    What Operating System are you running?
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • You do not have compatible vga hardware or driver to run You cam

    when i download & install cyberlink youcam software, massage shown at the end of installetion
    You do not have compatible vga hardware or driver to run Youcam
    what i do to resolve this problem, please suggest asap.
    Thanks
    pankaj kumar

    Hi:
    Did you install the graphics driver for your model?
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-134230-1&cc=us&dlc=en&lc=en...

  • 15-r006TU Hp Notebook, You do not have the compatible VGA hardware or driver to run youcam

    I recently purchased HP 15 R006TU Note book PC and installed Windows 7 Professional  32 bit on it. I installed all the recommended drivers for VGA but still find it difficult to run You cam on it and recieve an error message "You do not have compatible VGA hardware or drivers to run you cam". please suggest me the exact drivers to run you cam.

    Try installing HP Support Assistant which will automatically download and install drivers/updates:
    HPSA Link:
    http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html
    If this doesnt help, provide the Hardware ID of the device and we would prove the drivers.
    Help: http://www.wikihow.com/Find-Hardware-ID
    Wish you luck,
    Karthik
    --Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
    --Please mark the post that solves your problem as "Accepted Solution"

  • Cyberlink YouCam not working

    Hi Everyone, I am facing a issue with my webcam software "Cyberlink YouCam" in my HP Pavilion G6 laptop. An alert message saying "You do not have the compatible VGA hardware or driver to run cyberlink YouCam". Please suggest a solution for same. Also let me know if any details are reqd about the laptop. Thanks in advance.

    Hello @maumita_b,
    Welcome to the HP Forums.
    I see that you're having issue with the youcam software. I will try to assist you with this.
    Start by uninstalling and reinstalling the software. There is a chance that something's just error'd and this will correct it.
    If it does not, make sure that all Windows updates have completed. Then use the HP Support Assistant to check for driver  updates.
    If you need further assistance after that please provide the following:
    Currently install operating system.
    Model and product numbers.
    Let me know how this goes.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • Install Cyberlink YouCam Software

    Hi,
    when i try to install Cyberlink YouCam Software->sp70822.exe, i am gettint the error "You do not have the compatible VGA hardware or driver to run Yucam" ,how to use my cam?can anybody help me..

    Hi: Did you install the applicable graphics drivers for your machine? You need to: 1. Install the Intel chipset installation utility and reboot. This package contains the Intel Chipset Installation Utility and Driver for supported notebook models and operating systems. This utility enables the operating system to show the correct name for the installed Intel hardware in the Microsoft Windows Device Manager. File name: sp69573.exe 2. Install the Intel HD graphics driver and reboot. This package provides the driver that enables the Intel High-Definition (HD) Graphics in supported notebook models that are running a supported operating system. If high-definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. File name: sp70015.exe 3. Install the Nvidia HD graphics driver and reboot. This package provides the driver that enables the NVIDIA High-Definition (HD) Graphics in supported notebook models that are running a supported operating system. If high-definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. File name: sp69609.exe 

  • You do not have compatible vga hardware driver run youcam

    Dear !
    I am  facing the problem while opening the Youcam application kindly advise how to resolve, 
    PRODUCT NUMBER IS :J8B82PA#ACJ
    Model: 15-ro74tu
    The error is "you do not have compatible vga hardware driver run youcam"
    and also i am unable to install the Graffic Drivers,please help me out.
    Thanks in advance....
    This question was solved.
    View Solution.

    Hi:
    See if the Intel graphics driver directly from Intel works...First file listed is the auto install...
    https://downloadcenter.intel.com/download/24596/Intel-Iris-and-HD-Graphics-Driver-for-Windows-7-8-8-...

  • My cyberlink youcam wont work on my new laptop. it says my vga hardware is not compatable. help!

    I got a new HP g6 laptop and when I try to use CyberLink youcam it says it cannot operate because my VGA driver or hardware is not compatable. How do I fix this? Thanks

    The phone is locked to another provider. You will have to contact the provider to which the phone is locked to get the device unlocked. The seller may have told you that the phone would work with T-Mobile because the phone is GSM and has a SIM slot. That does nothing if the phone is locked to another provider. You may also have been scammed.

  • Compaq Cyberlink Youcam driver

    Hi guys.
    I have a Compaq Presario CQ60-405EI. I have not been able to use the webcam since I bought my PC! I have downloaded the Cyberlink Youcam software but still my webcam is not wroking. The Imaging Device is not listed on the Device manager and I have tried to search for the Youcam driver from the hp website but it is not available. Where can I download the driver?
    PLEASE HELP. Im in a foreign country and I need to skype with my fiance!!

    Hi @BharathKrishna ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your Compaq 15 s105TU Notebook and issues with the WebCam not working correctly. Here is a document on WebCam troubleshooting. 
    If that does not help I would uninstall the Cyberlink and the MediaSmart software completely and reinstall the software.
    The CyberLink YouCam Software should be installed.
    Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase.
    Please let me know how this goes.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • My built-in webcam is not being detected by CyberLink Youcam on Windows 7 (HP Pavilion dv2660se)

    Hi, I bought this laptop from someone I know, and Windows 7 came with it. I must say I don't know much about electronics. The built-in webcam won't work, either on CyberLink YouCam or on MSN Messenger. On CyberLink Youcam, it says no webcam is detected. In the control panel it doesn't even say there's a webcam, but there's an 'unknown peripheric' though. What can I do? P.S.: Please forgive english mistakes if there's any.

    Hi I have exactly the same problem. My webcam was working for months but I recently had the laptop sent for repairs for something else, and I've just noticed since having it back that the webcam isn't detected. When going into the webcam program it says there is no webcam detected and for integrated cameras, make sure it is switched on. I've also had an unknown USB device notification flashing up but when I investigate in Device Manager I have in 'Sound, video and game controllers' Cyberlink Youcam virtual driver installed and 'functioning properly' Also in USB devices there is a usb not functioning properly "Universal Serial Bus Controllers / (Standard USB Host controller) / Port_#0002.Hub_#0003" and 'no drivers have been loaded for this device'. It's unknown but when I choose to search  manually for driver updates the path it directs me to is C:\Program Files (x86)\Realtek\NICDRV_8169\win7    'Windows has stopped this device as it has reported problems (Code 43)' Does anyone know what I might be able to do? I've tried reinstalling the Webcam driver but apparent from that I don't really know where to go.... Thanks  

  • Failed to load Hardware monitor driver

    I'm running XP and getting  a "Failed to load Hardware monitor driver" message when I do the following.  Log Off\Switch Users.  When the new user comes up I get the error message along with a request that I send the following files to Microsoft.   C:\WINDOWS\minidump\Mini042404-01.dmp and C:\DOCUME~1\HEIDIN~1\LOCALS~1\Temp\WER1.tmp.  It then blue screens and reboots.  I can boot up into all users without any problem.  I only have the problem if I try to switch from one user to another withour rebooting first.  Is this a problem with "Live Monitor" or is it a problem with my Samsung Monitor?  I downloaded a Monitor Driver from Microsoft recently.  This makes the one and  only time I have ever seen a driver download on the Microsoft update page and it happened to be for my Monitor but it seemed to be the same version that came with it.  
    MSI 875P NEOR2 (bios 1.9)
    Intel P4 3G 800FSB (HT enabled)
    2x512MB dual Memory
    FX 5900 256mb by Gainward
    54xCD-ROM, DVD-Writer
    Samsung 19" LCD Display SyncMaster 955DF

    If you are running core centre on both profiles, this will happen. Fast user switching causes CC to load again, giving the message u have and will crash XP. U need to log off one user, then switch.
    Alternativly make sure CC is not installed as a shortcut in all users. I place mine in my gaming profile only and dont use it in any other one.
    If u r not running CC, mmmm, dunno  

  • Cyberlink YouCam errors out

    cannot get the internal web cam to work.
    looking at your awful help site it suggested that i download and use cyberlink youcam,
    i installed it as per your suggestion then once the installation was completed and i go to use the internal web cam
    a pop up box appears.
    in the message was a red circle with a white "X" in the middle. the error message reads
    "The procedure entry point ?EnableOnlyNumericalChar@CGED@@QAEXHAB_10@Z could not be located in the dynamic link library CtlFactory.dll"
    in the end i still do not have use of my webcam and your help site is still the worst in the industry.

    Hi @steven_Brock ,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    When  posting it is most helpful to us if you include your exact model and the Operating System you are running to enable to assist more effectively.
    How Do I Find My Model Number or Product Number?
    I grasp you are unable to use your Webcam.  After perusing the forum you downloaded and installed the Cyberlink YouCam Software.  When you tried to open it you received this error "The procedure entry point ?EnableOnlyNumericalChar@CGED@@QAEXHAB_10@Z could not be located in the dynamic link library CtlFactory.dll" when you open the Cyberlink YouCam software. .
    If you had a previous installation of the software did you uninstall it before installing from the download?
    Try this  step.
    Go to the command prompt
    Right click on it and run as administrator
    Type sfc /scannow and press enter.
    This will try to locate and repair any corrupted files.
    Have you tried running  The HP Support Assistant to aid with resolving issue and updating HP software.
    Is there any marks on the WebCam in Device Manager?
    If you connect an external WebCam does it work?
    Was there any changes or updates made just before this occurred?
    Have you tried doing a restore back to before this happened?
    If you would like further assistance, please provide your model and the Operating System you are running.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • When I attempt to start my CyberLink YouCam, I get the error message that it cannot find a webcam

    When I attempt to start my CyberLink YouCam, I get the error message that it cannot find a webcam or that I need to make sure my webcam is turned on.  I see nothing in my documentation about how to turn on the webcam which is included with my laptop.  How can I successfully turn it on and use the CyberLink YouCam?
    HP Pavilion dv7-6b63us
    Window 7 64-bit

    Hi
    Testing a Webcam Using YouCam
    Testing a Webcam Using QuickPlay
    Testing a Webcam using Your Favorite Instant Messenger
    Click start in search type Recovery Manager then click on it select Yes on User access control then select I need immediate help then select Driver & application recovery select the Webcam driver and install it then restart the unit.
    Fixing Webcam Problems in Windows
    Incase you have the same issue please contact HP Technical support and get the Webcam replaced.
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • CyberLink YouCam wont record

    I have been using the CyberLink YouCam for recording videos but now when I try to record,  10 videos with black screens apear at the bottom. and i cant watch videos i recently created please help me. -Syd

    Hi Syd1599,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Notebook and having issues with the Cyberlink YouCam software. Try performing a hard reset. When performing a hard reset please note remove any and all USB devices, and remove memory cards from the card reader slot. The hard reset will terminate anything that is either stalled or not responding. Does it give you an error message? What about a regular movie DVD does it play? I would be happy to assist if needed as there are many models of HP Notebooks. I would need the model number. How Do I Find My Model Number or Product Number?
    Please respond with which Operating System you are running:
    Which Windows Operating System am I running?
    Please let me know.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Maybe you are looking for