VGA mode settings affect Chromium tabs text

Hi,
This sounds incredible. Maybe, supernatural is a better word.
The game, step by step:
(1) Onboard Intel video card. Everything's fine, thanks to KMS, probably. I never have had to touch anything: all the resolutions, grub, X or no X, correct right from the start. Chromium  on my desktop (KDE) is OK, which is taken for granted.
(2) Nvidia card is bought; no KMS for me any more. No big deal. An interesting artifact shows up, though: I start getting garbled text in the Chromium tabs (KDE again, of course). About half the characters are in place, another half gets replaced by random characters. I've been living with it for some time (no big deal). But I didn't like 800x600 resolution for GRUB2 and the terminals; so I went through the proper motions and changed resolution to 1280x1024. Not quite native for a 1400x1059 monitor, but almost perfect. While admiring my handiwork I've found a bonus: Chromium tabs look right again!
I understand that video modes is a prominent case of either-or. Or is it really so?

anonymous_user wrote:However, it was supposedly "fixed" with the xorg packages version 1.13.0.902-2. Is your system up-to-date?
Yes, my system is up-to-date. No, this isn't my story: partial transparency I've been taking for a feature; I'm still taking it for one .
Last edited by Llama (2012-12-16 07:41:53)

Similar Messages

  • How to get my macbook pro out of VGA mode

    I plugged my new Macbook Pro into a VGA adapter to do a slideshow on a projector screen, and after i was finnished, my mac is still in VGA mode on the lcd screen - is a awkward view mode.  Does anyone know how to revert back to a normal viewing mode?  Even after restarting the macbook, it remains in the mode for being connected to a vga cord.  thank you.

    Safe Mode uses a simple display mode and bypasses the stored settings. It can be used to get out of situations where you set the resolution or configuration wrong.
    Hold down Shift as you start up.
    It will run a pass of "Repair Disk", which takes several minutes.
    Then it will come up with minimal extensions loaded and default display settings.
    Provide your User_id and password and log in.
    Change the displays prefs to something boring.
    Be certain to close the pref pane and Save changes.
    Restart.

  • Use Chromium OS text-to-speech voices with Chromium browser

    ...and he's at it again!
    TL;DR chromium-ext-chromiumos-tts-git - all TTS voices from Chromium OS for use with Chromium desktop browser. Install as unpacked extension (no more auto-install, sorry, damn you Google!)
    So you've heard about the text-to-speech capabilities of Chromium OS, and you would like to use them with your desktop browser?
    Perhaps you have dyslexia, a visual disability, or just a desire to learn a new language, have Web pages read out to you, or you simply want to show off your digital-fu to your friends?
    Then you may have noticed that the Chrome web store does have plenty speech synthesizers from third parties, but in most countries, the one from Google usually shows up with just one voice (US English).
    For those who don't (want to) speak English, are bi-/multilingual, or who just are more open-minded with regards to the world's languages, here's my way to help make this happen: chromium-ext-chromiumos-tts-git on the AUR.
    This extension packages the TTS engine and all the voices available from the Chromium OS project...as a Chromium extension.
    To install it:
    Download the taurball, build and install the package
    In Chromium, browse to chrome://extensions
    Enable Developer mode by ticking the box
    Click the button named "Install unpacked extension..."
    Navigate to /usr/share/chromium/extensions/chromium-ext-chromiumos-tts
    Click on Open
    That's it, you should now have a new extension named "Chromium OS Text-to-speech (by Google)" enabled and ready to use.
    Note: Before rushing off to try out some HTML5 / TTS demos out there on the Web, please realize that not all of them work well (or at all), since text-to-speech on the Web is quite new and still in development.
    The easiest way to get a quick glimpse (or rather soundbite) of what this thing can do, is to install the ChromeVox extension from the Google web store. After installation, click on its Options link, scroll down to Voices, and try out the different languages from the listbox.
    Suggestions, questions, etc. are very welcome.
    Enjoy :-)
    Last edited by ackalker (2015-01-04 17:46:38)

    To make it clear, this is not ripped, reverse-engineered, "warez" or anything like that. It uses publicly available material from the Chromium OS project, and modifies only BSD-licensed source files.

  • Lost settings and import tab on with itunes 10

    We've lost the settings and import tabs that are supposed to be at the lower right in itunes.  Any idea how to get them back.  And/or how else to import music from an old computer to a new one using home sharing.

    You can restore much of the look & feel of the previous version with these shortcuts:
    ALT to temporarily display the menu bar
    CTRL+B to show or hide the menu bar
    CTRL+S to show or hide the sidebar
    CTRL+/ to show or hide the status bar (won't hide for me on Win XP)
    Click the magnifying glass top right and untick Search Entire Library to restore the old search behaviour
    Use View > Hide <Media Kind> in the cloud or Edit > Preferences > Store and untick Show iTunes in the cloud purchases to hide the cloud items. The second method eliminates the cloud status column (and may let iTunes start up more quickly)
    If you don't like having different coloured background & text in the Album view use Edit > Preferences > General and untick Use custom colours for open albums, movies, etc.
    tt2

  • How do I customize the tab text displayed on bookmarked sites?

    I often use "open all as tabs" for a bookmark folder of weather.com "5 day forecast" sites covering the towns in a geographical region where I plan to go hiking.
    One Firefox browser with six tabs for six towns in my state. "5 day forecast for Gorham," "5 day forecast for Jackson," "5 day forecast for Lincoln," etc.
    The problem is the tab displays only some of the first few words of the site description: "5 day forcas," "5 day forcas," "5 day forcas," etc.
    I'd like to display only the end of that sentence, which is the name of the town. This way I would have a list of towns across the top of the browser for direct reference.
    I changed the "name" property of each bookmark, but that only affects the name in the bookmark collection list, not the display name of a tab in use.

    1. With all due respect for your attempt to help; Of course it's part of the page source! That's a given.
    2. Again, with all due respect for you bothering; Letting me know that you don't think a thing is doable is not helpful, it's just chat.
    Thanks anyway, for your time.
    ~~~~
    My instinct is that of course there is something that could be done, it's a computer, every bit of it is adjustable.
    Some browser function grabs the title-tag text for display. It could just as well be redirected by a script (is that the right term?) to grab text held in a list in the bookmark for that page. Let's hear from someone on this idea, please.
    The point is, why have titles on tabs if it is junk information? Best use of the small tab text display area would be an abbreviation!

  • Dmesg NVRM / VGA mode?

    # dmesg | tail
    [   15.458823] NVRM: Your system is not currently configured to drive a VGA console
    [   15.458830] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
    [   15.458834] NVRM: requires the use of a text-mode VGA console. Use of other console
    [   15.458838] NVRM: drivers including, but not limited to, vesafb, may result in
    [   15.458841] NVRM: corruption and stability problems, and is not supported.
    # cat /boot/grub/menu.lst (kernel line)
    kernel /vmlinuz-linux root=/dev/sdb3 ro quiet vga=795 5
    # uname -a
    Linux desktop 3.4.2-2-ARCH #1 SMP PREEMPT Tue Jun 12 07:19:42 UTC 2012 i686 GNU/Linux
    # lspvi -v
    01:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9400 GT] (rev a1) (prog-if 00 [VGA controller])
        Subsystem: Micro-Star International Co., Ltd. Device 1413
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
        I/O ports at dc80 [size=128]
        [virtual] Expansion ROM at fea00000 [disabled] [size=512K]
        Capabilities: [60] Power Management version 3
        Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
        Capabilities: [78] Express Endpoint, MSI 00
        Capabilities: [b4] Vendor Specific Information: Len=14 <?>
        Capabilities: [100] Virtual Channel
        Capabilities: [128] Power Budgeting <?>
        Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
        Kernel driver in use: nvidia
    # pacman -Ss nvidia | grep installed
    extra/libvdpau 0.4.1-2 [installed]
    extra/nvidia 302.17-1 [installed]
    extra/nvidia-utils 302.17-1 [installed]
    Last edited by Kilzool (2012-06-18 15:54:12)

    I remember this message from the first time i played around with the vga= kernel option long time ago. There is basically now way around it and I'm not sure if it does produce any problems afterall.
    On my laptop I can only get what my bios allows as resolution (1024x768x32) on a 1280x800 display. Only way to get true native resolution is with nouveau and KMS.
    Tried uvesafb and everything in the wiki but simply can't get any high than 1024x768. Syslinux Hardware Detection Tools also only listes this has the highest possible vga mode and provides the appropriate number for it.
    Let's hope that NVIDA will support KMS in the future. Not only for prettier ttys but also for wayland.
    Also like to use KMSCON in the future as kernel console replacement. Anti-Aliased hardware accelerated FullHD console Hello!
    kmscon-git is already in the AUR.
    Last edited by blackout23 (2013-02-08 22:02:34)

  • ClearType is on and size of text is medium 125% problem menu bar bookmark bar and tab text is not clere at all

    system is windows 7 ClearType is on and also in display settings medium is chosen for 125% text size all the bars and tab text is very not clear at all

    Little bit of progress:
    When I allow whatever IE7 blocks, the menu works but 75% of
    the background images don't show up until I hover over them. The
    tabbed menu seems to work fine then though.
    Edit: Sorted the images no showing, but the "Stopped ActiveX
    running" etc error menu still pops up...can I stop that happening
    or is it something that is set on each individual's computer?
    Also the white box background around the round buttons show
    up, as if it was jpeg not a GIF, is that solvable?

  • The settings on the tab for "delegate" was not properly stored.

    Hello group,
    I try to write it in english - but it is a try only *g
    Since last week I can´t set or delete any user or groups from the delegate tab.
    Only User in the IT OU can set delegates. I´ve compare the users with acldiag and I can´t see any differnce.
    I´ve try to move the users to the IT OU but the problem is the same.
    New Users have the same problem. I´ve copy a User that can set delegates but the copied user can´t set it. 
    Die Einstellungen auf der Registerkarte für "Stellvertretungen" wurde nicht
    korrekt gespeichert. Liste zum Senden im Auftrag kann/können nicht aktiviert werden.
    Sie besitzen nicht die erforderliche Berechtigungen, um diesen Vorgang mit diesem Objekt auszuführen.
    I´ve translate the error message with google language tools.
    The settings on the tab for "delegate" was not
    properly stored. List to send in the order can or can not activated will.
    You do not have the required permissions to perform this operation with this object.
    Our enviroment is a single W2k3R2 Domain with 2 Ex2k3 and 1 Ex2k7 Server.
    Thx for any help!!
    Kind Regards
    Denis Ecklerhttp://www.ewig-drohendes-versagen.de
    ICE 2009 I´ll be there -> http://www.ice-lingen.de/

    Hi Denis,
    At this time, I suggest you apply following hotfix on a problem Outlook 2007 client to check whether the error still exists:
    Error message when you try to add a delegate in Outlook 2007: "The Delegates settings were not saved correctly"
    http://support.microsoft.com/default.aspx?scid=kb;EN-US;950794
    I would like to explain that the hotfix is included in Office 2007 Service Pack 2. Therefore, you can simple install SP2 on Outlook 2007 and create the registry key indicated in the KB article.
    Please understand that before this hotfix was created, the "Send on Behalf" (PublicDelegates) permission was considered a mandatory part of adding a delegate. This hotfix lets you add the delegate without setting the "Send on Behalf" (PublicDelegates) property.
    The "Send on Behalf" permission is not needed for meeting-related messages. Therefore, even without the "Send on Behalf" permission, delegates can successfully send meeting requests and responses on behalf of the calendar owner. However, when you use a delegate that does not have the "Send on Behalf" permission to send a non-meeting-related message on behalf of the owner, the operation fails.
    After installing the hotfix and apply the registry key change, if the error can be resolved, we can conclude that the issue occurs due to Outlook is not able to update the PublicDelegates attribute successfully due to permission issue. After your previous post, I notice the issue occurs even if you create a new user.
    At this time, would you please let me know whether the new user belongs to any group (except domain users)? I also suggest you use DSACLS tool to export the ACLs of the user object to check whether acl may reject the user to update AD attribute.
    DSACLS “distinguished name of the user object” >acls.txt
    Thanks,
    Mike

  • Re:note tab(text box) in Miro screen

    Hi all
    Can any one tell me in which table the Note tab (text box) of miro screen will be stored.

    Hi,
    Please try this.
    1. Go to SE16.
    2. Enter table name STXH.
    3. Enter: TDOBJECT = 'RBKP', TDNAME = RBKP-BELNR + RBKP-GJAHR, TDID = '0001' and TDSPRAS = 'EN'.
    4. Execute ...
    5. Then go to SE37.
    6. Enter function module READ_TEXT.
    7. Fill parameter: ID = STXH-TDID, LANGUAGE = STXH-TDSPRAS, NAME =  STXH-TDNAME and OBJECT = STXH-TDOBJECT.
    8. Execute and check return table lines.
    Regards,
    Ferry Lianto

  • Virtex6:Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings

    Hello，everyone.
    I am using virtex6 FPGA and trying to download mcs file to PROM and have failed.
    I download .bit file to FPGA and succeed.
    When i try to download .mcs file to PROM XCF128X-FTG64C(BPI Flash) and choose Slave SelectMAP Mode
    and the process is about 68% it fails.
    The message below the IMapct is as belows:
    done.
    PROGRESS_END - End Operation.
    Elapsed time =      0 sec.
    // *** BATCH CMD : identifyMPM
    // *** BATCH CMD : assignFile -p 1 -file "C:/Users/Administrator/Desktop/TEST/LED/led.bit"
    '1': Loading file 'C:/Users/Administrator/Desktop/TEST/LED/led.bit' ...
    done.
    INFO:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
    but the original bitstream file remains unchanged.
    UserID read from the bitstream file = 0xFFFFFFFF.
    INFO:iMPACT:501 - '1': Added Device xc6vlx240t successfully.
    INFO:iMPACT - Current time: 2014/3/13 8:48:14
    // *** BATCH CMD : Program -p 1
    PROGRESS_START - Starting Operation.
    Maximum TCK operating frequency for this device chain: 66000000.
    Validating chain...
    Boundary-scan chain validated successfully.
    INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C >  120.00C]
    1: Device Temperature: Current Reading:  230.52 C, Max. Reading:  230.52 C
    1: VCCINT Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
    1: VCCAUX Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
    '1': Programming device...
     Match_cycle = NoWait.
    Match cycle: NoWait
     LCK_cycle = NoWait.
    LCK cycle: NoWait
    done.
    INFO:iMPACT:2219 - Status register values:
    INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
    INFO:iMPACT:579 - '1': Completed downloading bit file to device.
    INFO:iMPACT:188 - '1': Programming completed successfully.
     Match_cycle = NoWait.
    Match cycle: NoWait
     LCK_cycle = NoWait.
    LCK cycle: NoWait
    INFO:iMPACT - '1': Checking done pin....done.
    '1': Programmed successfully.
    PROGRESS_END - End Operation.
    Elapsed time =     23 sec.
    Selected part: XCF128X
    // *** BATCH CMD : attachflash -position 1 -bpi "XCF128X"
    // *** BATCH CMD : assignfiletoattachedflash -position 1 -file "C:/Users/Administrator/Desktop/TEST/LED/leda.mcs"
    INFO:iMPACT - Current time: 2014/3/13 8:49:32
    // *** BATCH CMD : Program -p 1 -dataWidth 16 -rs1 NONE -rs0 NONE -bpionly -e -v -loadfpga
    PROGRESS_START - Starting Operation.
    Maximum TCK operating frequency for this device chain: 66000000.
    Validating chain...
    Boundary-scan chain validated successfully.
    INFO:iMPACT - 1: Over-temperature condition detected! [ 230.52C >  120.00C]
    1: Device Temperature: Current Reading:  230.52 C, Max. Reading:  230.52 C
    1: VCCINT Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
    1: VCCAUX Supply: Current Reading:   2.997 V, Max. Reading:   2.997 V
    '1': BPI access core not detected. BPI access core will be downloaded to the device to enable operations.
    INFO:iMPACT - Downloading core file D:/Xilinx/14.3/ISE_DS/ISE/virtex6/data/xc6vlx240t_jbpi.cor.
    '1': Downloading core...
     Match_cycle = NoWait.
    Match cycle: NoWait
     LCK_cycle = NoWait.
    LCK cycle: NoWait
    done.
    INFO:iMPACT:2219 - Status register values:
    INFO:iMPACT - 0011 1111 0111 1110 0100 1011 1100 0000
    INFO:iMPACT:2492 - '1': Completed downloading core to device.
    Current cable speed is set to 6.000 Mhz.
    Cable speed is default to 3Mhz or lower for BPI operations.
    Current cable speed is set to 3.000 Mhz.
    Setting Flash Control Pins ...
    Setting Configuration Register ...
    Populating BPI common flash interface ...
    Common Flash Interface Information Query completed successfully.
    INFO:iMPACT - Common Flash Interface Information from Device:
    INFO:iMPACT - Verification string:  51 52 59
    INFO:iMPACT - Manufacturer ID:         49
    INFO:iMPACT - Vendor ID:              01
    INFO:iMPACT - Device Code:            18
    Setting Flash Control Pins ...
    Using x16 mode ...
    Setting Flash Control Pins ...
    Setting Configuration Register ...
    '1': Erasing device...
    '1': Start address = 0x00000000, End address = 0x008CE03B.
    done.
    '1': Erasure completed successfully.
    Setting Flash Control Pins ...
    Using x16 mode ...
    Setting Flash Control Pins ...
    Setting Configuration Register ...
    INFO:iMPACT - Using Word Programming.
    '1': Programming Flash.
    done.
    Setting Flash Control Pins ...
    '1': Flash Programming completed successfully.
    Using x16 mode ...
    Setting Flash Control Pins ...
    Setting Configuration Register ...
    '1': Reading device contents...
    done.
    '1': Verification completed.
    Setting Flash Control Pins ...
    Current cable speed is resumed to 6.000 Mhz.
    '1': Configuration data download to FPGA was not successful. DONE did not go high, please check your configuration setup and mode settings.
    `Elapsed time =    814 sec.
    and i find many people have met the same thing. But they are spartan  series FPGA and i try to low the Resistances of Mode pins,M0 M1 and M2, but the problem does not been solved.
    I have read the status Registers and find there is an over-temperature state 
    and in Impact i could not readback the registers. It is strange.
    I am anxious about this problem and have not solved it yet
    What reasons may it be?
    Hope for your answer, thank you

    Hi~I want to know if you solve the configuration problem for virtex-6?
    As I encounter the  same configuration problem, I want to consult  you with some question.
    Can I have your email?
    gszakacs wrote:
    I have measured the VCCINT and find it is 1.0V, not 2.997V;
    That is not at all surprising.  I always assumed the problem is with reading the XADC (system monitor) block and not with the voltage or temperature.
    my Reference board is ML605
    That would have been nice to know at the beginning...
    It seems that you have selected the correct mode, assuming your jumpers are set as required in the ML605 Hardware User's Guide.  See table 1-27, table 1-33 and the note below it about switch S1.
    I'm not that familiar with the details of this reference design, but it may be that the slave SelectMap circuitry requires a reset or power cycle to actually configure the FPGA.  Have you tried power-cycling to see if the FPGA boots from the flash?
    I'd also suggest that you select the V6 in the JTAG chain view, then go to the debug menu of Impact and select Read Device Status (this is from memory, but it's something like that).  That will not only show the bits of the configuration status register, but also describe what each bit means.  Among other things you can check the state of the FPGA's configuration logic and the Mode pins.
     

  • Setting the tab text color in JTabbedPane

    How do I set the text color of tabs? I have to make the text color of one tab to blue and the other tab text color to red. Thanks.

    I tried giving the below but text color is the default it did not change. 'this' is the JTabbedPane. Any other suggessions? Thanks.
    this.setForegroundAt(0,Color.blue);
    this.setForegroundAt(1,Color.red);

  • Linux: The tabs text color changes with the theme, while the menu text color is always black.

    Hello,
    When Firefox theme is changed, it usually changes window appearance, e. g. backgrounds, and sets corresponding text color to contrast with that background. It always used to be like this. For instance, I currently use Sunflower_01 theme which sets blue sky as a background. The tabs text is white, as well as the bookmarks. The white text contrasts very fine with the sky. But the menu items are awfully black, casting dark-gray shadows on the dark-blue sky. The menu remains black regardless of the theme I set.
    Of course, it's all fine without any add-ons (light background, dark text), but with a theme enabled, it looks not the way it used to be. I wonder if it can be fixed somehow.
    I use Mozilla Firefox 33.0 for Linux Mint (release 13, maya).
    Looking forward to your reply.
    Regards,
    Andrey

    Hello,
    Did you install from the repositories? I have found the same problem with Ubuntu 14.04, a workaround is to either use a userChrome.css file, or (in my opinion, the easier route) [https://addons.mozilla.org/en-US/firefox/addon/stylish/ Stylish] extension with a new Style.
    See these articles about the userChrome.css file:
    * http://kb.mozillazine.org/index.php?title=UserChrome.css
    * http://kb.mozillazine.org/UserChrome.css_Element_Names/IDs
    If you use the userChrome.css route, you may need to restart Firefox to apply the changes.
    See this article for Stylish:
    * http://forums.mozillazine.org/viewtopic.php?f=38&t=1570945
    To add a new style in Stylish, click on the Stylish tool on your toolbar, then "Write New Style", then "Blank style". Or:
    * Tools (or [[Image: New Fx Menu]]) > Add-ons > User Styles > Write New Style
    Example code for either one method you choose (you can play around with the colours, but I found this worked nicely for my theme):
    @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul");
    /*change size, color, style of text in Menu Bar */
    menubar > menu
    {color: darkgray !important}
    /* Mouse hovering over menu */
    menubar > menu[_moz-menuactive="true"]
    {color: white !important;}
    /* Active/Open menus */
    menubar > menu[_moz-menuactive="true"][open="true"]
    {color: black !important;}

  • Blend mode settings

    hello photoshopers.
    id like to know if possible from what the blend modes are composited by,i tend to like mostly the overlay or soft ligh blend mode,is the a seeting for this?the reason i as for this is that if i tend to lower the opacity i wont get the exact result lik ethe overlay or soflight blend offers.and the major reason im trying to figyre out the settings is that when ever i have a layer with a blend mode,when i merge it with some other layer,i loose the blend,it goes back to normal,so im thinking
    that if i know where ot see the blend mode settings maybe i dont use the blend modes and use the light,contrast,colors etc etc etc to get a blend mode Emulation
    thank you.

    hello k-pxl
    thank you for the information.i did try what you suggested.but to tell you the truth it didnt work for the particular technique im after,cos
    there is a purpose why im trying to achieve this.Thats exaclty whats frustrating me,the fact that i use the blending modes on 2 layers
    to get the result im after devastates me when i merge them and go back on 0 again,i use this technique to achieve great shines and shades
    something lowering the opacity wont do on its own,so my A-Z question is how to find a way to merge 2 layers that have a blend mode and ps not
    to  combines them into a new layer and get rid of the blend.
    i hope i find an answer to my solution.

  • How do Design Mode Settings get Packaged?

    Hi,
    I've got a question about packaging a Site's Design Mode settings.
    If I edit the Settings of a parsys in Design Mode (i.e. Anchors, or Allowed Components), where in the JCR do these settings get stored?  How do I ensure they are packaged?
    I'm sure this is a simple answer...
    Thanks!

    Hi Tim,
    If you are setting for example allowed components for a parsys and you have assigned to your page some custom design (not default) all configurations are stored under:
    /etc/designs/<name_of_design>/jcr:content/<name_of_template>/<name_of_parsys> in the components property
    Reagrds,
    kasq

  • Cache mode settings

    Hi all,
      My requirement is i have change the cache mode settings of particula query from cache mode 1( Main Memory Cache Without Swapping ) to cache mode 3 (Persistent Cache per Application Server).
      Here my question is can i transport these settings to the production system or should i do this cache mode settings in my production system itself.
    Thank you very much for your suggestions.
    Regards
    Prasad

    Hi ,
    After u save the settings in the cache mode u can very well
    transport it to the production system
    Assigning Points is the way of saying Thanks in SDN
    Regards ,
    Subash Balakrishnan

Maybe you are looking for