VGA monitor and a 2010 Mac Mini - HELP PLEASE!

I just upgraded from the early 2009 model where all you needed was a VGA to mini DVI adapter. With this 2010 model, Im not sure if thats possible (for cheap anyway). I have a VGA monitor and all I want to do is hook it up to the new mac mini ...but how? I've heard that because VGA is analog and HDMI is digital that it cannot be done for under $100 ..is this so? why oh why couldnt apple have stuck with mini dvi. Please someone advise how to do this ..or am I forced to buy a new monitor with DVI/Mini DVI/HDMI connections

Forget the HDMI port. There's the Mini DisplayPort available, and all it takes is the right adapter:
http://store.apple.com/us/product/MB572Z/A
That should solve your problem.

Similar Messages

How do I plug a VGA monitor into a new mac mini?

How do I plug a VGA monitor into a new mac mini?
Why do Apple change everything all the time?

You need an adaptor, HDMI to DVI is included in the package, take HDMI to VGA or thunderbolt which, in case of monitor, is the same as minidisplay port to VGA. Apple has always upgraded the best output port, unfotunately monitor manufacturers have not done the same.

VGA monitor and TV switchbox with Mini

I have recently purchased the EyeTV for DTT box for my Mac Mini. I currently use a Dell VGA monitor for my work but would like to watch TV broadcasts from the EyeTV through my TV. However, I don't want to keep unplugging the monitor and then plugging in the TV (via the DVI - S-video adaptor) each time I want to view EyeTV stuff. Is there some kind of switchbox available which would enable me to have both the monitor and TV connected and where I could just flick a switch to send the video signal to either the monitor or TV (note: I don't need the video signal to be displayed on both the monitor and TV at the same time).
Thanks in anticipation.

Sorry I misread your post.
One option would be an eyeHome which would connect to the ethernet port of the Mac mini.
Another option is a VGA Splitter.

Installing retail 10.6.3 server on mid 2010 Mac Mini help needed

Hi,
I just bought a retail server package (10.6.3)and i want to install on one of the new Mac Minis (2010) but it won´t find the ethernet interface.
TIA
BOF

I know exactly what you are going through.
The solution I found was to use another Mac. If you don't have another Mac or a friend that has one, then my solution wont work for you..
Firstly, make sure you install server (whatever version you have). Once it asks you to restart, go ahead and restart and turn it off manually.
Download the 10.6.6 combo update (download here: http://support.apple.com/kb/DL1348) on the other Mac (I used my MBP). Once done, place your Mini in target mode (turn on and hold the letter T on the keyboard) and connect it to the other Mac. Open the combo update and select your Mini's HD as your destination. Once done, turn off your Mini to get out of Target mode and restart it.
Voila! You'll be in 10.6.6 and you'll be able to see the Ethernet interface.

Mac Mini Help Please!!! - Hard Drive and Time Machine

Hello everyone,
I return once more seeking your support if I may...
I went down to the Genius Bar today, as my Mac Mini was having the multi-colour circle not-responding icon showing an awful lot, and it was struggling to perform simple tasks.
I bought my mac mini 2 years ago (12-Mar-11), and I was told there was an I/O error; and i needed a new hard drive.
I am currently backing up my machine, onto a WD My Passport 500gb.
When a new hard drive is installed by Apple, can I restore my files with my 'My Passport' backup?
I do also store other items on 'My Passport'; does this make a difference when trying to restore my files to my new hard drive?
One more question if I may...
Has anyone here had a new hard drive installed by Apple before, and if so, has the hard drive 'stood the test of time'
Many thanks in advance for your help
James

What utility are you using to backup your drive?
Apple buys hard drives from major manufacturers like Toshiba, Samsung, Seagate, and Western Digital. The drives will last as long as any drive you would purchase from them. Some last long and some don't.
Suffice to say the drives carry a specific warranty. That should give you an idea how long the manufacturer thinks it will last on average.
You can restore files from your backup pretty easily in Mountain Lion. If you are using Time Machine then you can actually boot from a Recovery HD image that it places on your backup drive. To boot from it you must connect the backup drive, then restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD and then click on arrow button beneath the icon.

PC to Mac mini, help please

Hi, I'm still new to Mac and even newer to things like networking.
I have a PC that has over 800 songs that I want to transfer into my Mac mini before my iPod Shuffle arrives through the mail.
The reason is the many problems that the Shuffle has when interacting with Windows PCs according to Apple Discussions. I want to move the PC out of the way and into the basement as soon as this is done
So my question is how do I transfer my songs without burning 800 songs to CDs? Can I hook up the two computers through the ethernet ports?
The PC has no firewire ports but has usb ports.
Do I need software to do the transfers also? If so is there any free software on the web to use?
Thanks to all who respond.

Thanks for help but it still hasn't worked for me.
Jesse Jay when I try the smb://... I keep getting "The Finder cannot complete the operation because some data in "smb://..." could not be read or written (error code -36)" any clues what this means?
kd5bloc you stated "The second solution was much easier...Enable the networking from the Mac, and finding it via Windows". Maybe this will work if it will allow Mac to compy music files from PC, but once networking is enabled on the Mac how do you find it using Windows?
To anyone else who has or knows how to connect a Mac Panther to PC XP directly through ethernet for the purposes of transfering music files from the PC to the Mac please by all means leave instructions or links to articles on the web if you know any.
I have spent many hours reading articles and trying to get it to work but I just can't. Thanks to all who reply.
Mac Mini Mac OS X (10.3.9) 1.42 GHz PowerPc G4 256 MB DDR SDRAM 80GB Ultra ATA Hard Drive
Mac Mini Mac OS X (10.3.9) 1.42 GHz PowerPc G4 256 MB DDR SDRAM 80GB Ultra ATA Hard Drive

Mac Mini Help please

I bought a new mac mini and I have it hookup to my Samsung 24 inch monitor. I seem to get headaches when using the computer now. I funny thing is I installed Windows and I don't have this issue. My work I asked the IT guy and he said to change the refresh rate but I can't it wont go past 60. Does anyone have any ideas, basically I am stuck using windows and it ***** lol.

Screen frozen on mac mini--help please!

Updated "Pages" and screen froze. Did a hard restart and, yet, the spoked wheel is still. Triple-checked.
Is there some sort of "restart and hold down the keys" solution? Thanks!

Hi, restart it by powering down first.
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

My magic mouse does not pair with my mac mini help please

i get a error message pairing unsuccessful i have paired it ok with my Macbook AIr ok

If the mouse is paired with the Air, you will need to delete from there before it will pair wiht the mini. Bluetooth devices may be only paired with one thing at a time.
Barry

2010 mac mini - monitor goes dark every few sec's problems since Mavericks Install

My Wife updated her 2010 Mac mini from Mountain Lion to Mavericks and ever since, after start, up the display intermittently flashes a dark screen, every few seconds. (within 3-10 seconds or so, there will be another period of dark screen, that may last aprox. 1- 6 seconds. The timing of this changes constantly. The finder and all apps I have seen are affected in the same way. it seems to be an all-the-time problem
the monitor is an OptiQuest Q9, and the system connects via an Apple mini display to VGA adapter (supplied with the mac mini) , then a vga cord into the monitor, which has a native resolution of 1280 x 1024.
The only workaround we have found is to boot the mac with the monitor cable disconnected, then reconnect the monitor cable after boot up is complete. In that case, the monitor does not flash, until the mac is shutdown or restarted again.
Steps I have already tried:
Zapped P-Ram
Reset SMC (shutdown, waited with power unplugged, then reattached power and rebootted
Repaired disk permissions,
repaired disk
re-download and reinstalled mavericks fresh.
changed display prefs for resolution, detected displays, etc.
Changed background picture.
I don't know where to go with this anymore, and it has already taken a lot of time.
Who's got a Fix?    And if there is no fix, how do I revert from Mavericks to Mountain Lion?   The mac mini came with Snow Leopoard.

Problem Fixed!
I found another page that referred to resetting the PMU (http://support.apple.com/kb/ht2183) , which controls things like wake and sleep:
"If the settings in the PMU become corrupted, it can result in operational anomalies such as your computer not turning on, not displaying video, or not waking from sleep, among other things. In these situations, you may need to reset your computer's PMU."
Anyway, it is pracitcally the same proceedure as resetting the SMC (SMC reset= Shut down, disconnect power cord for 10 seconds, reconnect power cord, wait 5 more seconds, turn computer back on)
but it is slightly different:   (PMU REST = Shut computer down, disconnect power cord for 10+ seconds, reconnect power cord WHILE SIMULTANEOOUSLY PRESSING POWER BUTTON, let off power button for a few seconds, then press power button again to restart the mac mini.)
After this the display problem was fixed, but the fan ran at high speed, so I did one more SMC reset as described above. Now everything is in order.   This also fixed the issue of the mac mini not waking from sleep unless the power/sleep button on the mini was pressed (it wasn't responding to the keyboard to awaken). Now it's all good.
Hope this helps somebody else...

Sound toggles on and off when I hit the "0" key on a 2010 Mac Mini.

Whenever I hit the zero key on an Apple keyboard using a 2010 Mac Mini, the sound toggles on and off. It does not happen when I use the keyboard with a 2012 Macbook Pro. There can be times when the sound toggles when I am not even typing. I upgraded to Mountasin Lion, but this did not resoilbve the issue. I have disabled remote control.
Thanks to all for your help.

Hi John,
That's often a sign of a bsad Capacitor in the Power Supply, but...
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

I have a 2010 mac mini referbished and i dont see the Disk Utilitiy in the Utilities on the install disk. Is that because it is refurbished?

I have a 2010 mac mini referbished and i dont see the Disk Utilitiy in the Utilities on the install disk. Is that because it is refurbished?

The software that comes with your refurbished Mini should be identical to that which comes with a new Mini. Disk Utility should be in Applications > Utilities. Alternatively, choosing Utilities from the Go menu at the top of the finder windownwill take you directly to the Utilities folder.

How can I run a vga monitor and projector together on my Mac Pro 15"??

How can I run a vga monitor and projector together on my Mac Pro OSX 15"?

You can upgrade to Snow Leopard, Lion or Mountain Lion (coming next month), but you need Snow Leopard to upgrade to Lion or Mountain Lion. Check this web to know how to add memory to your computer and the memory that it supports (probably, 3 GB).

Have downloaded Mountain Lion on my 2010 Mac Mini. Now when starting up, after a while I get a message that says, "You must restart your computer." I do that but get the same message again and again. Any ideas? Thanks!

I am having issues trying to start up with Mountain Lion on my 2010 Mac Mini. Here's the scenario:
1) After starting up, I get the usual gray screen with Apple logo.
2) After a few minutes, a darker gray screen scrolls down and in the middle of this is a black dialogue box with reversed (white) text. This text, in multiple languages, reads: "You need to restart your computer." Then it goes on to instruct on how to shut it down and restart it.
3) I follow this instruction, but get the same dialogue box over and over agin.
Any ideas?
Thanks and best wishes.

If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Safe mode is slower than normal, and some things won’t work at all. Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the startup volume is on a software RAID, you can’t boot in safe mode. If you're able to boot, launch the Console application in any of the following ways: ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. ☞ Open LaunchPad. Click Utilities, then Console in the icon grid. Select the most recent panic log under System Diagnostic Reports. Post the entire contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Help: Install Snow Leopard Server 10.6.0 on Mid-2010 Mac Mini, then update?

I just purchased a Mid-2010 Mac Mini with Snow Leopard Client 10.6.3 (the new ones just released) with the idea of installing my copy of Snow Leopard Client on it and using it as both a network server and media server.
I own Snow Leopard Server 10.6.0 (the initial DVD release) and was thinking I could do a fresh install and update to 10.6.4 on the Mini without problem, but that didn't work. I also tried doing a Target Disk Install to the Mini using my MacbookPro, but the installer choked at the Machine Checksum saying MBPs weren't supported to run the installer.
So, that blows both of my previously known installation options. I was wondering if anyone else with the new Mini and Snow Leopard Server had any suggestions on how to get my current version of Snow Leopard Server (10.6.0) installed on the Mini and then run system updates to get it to boot properly.
Thanks

Allan Eckert wrote:
Hi GrainFocuser;
Your copy of SL Server version is probably too old to install on the new Mac Mini. It probably doesn't have all of the correct drivers for the newer hardware.
You might have better success with your alternatives if you post over on the server forum instead of here.
Allan
Message was edited by: Allan Eckert
Allan, thanks.
It is pretty clear that my installation disk is too old, hence looking for options and suggestions.
In years past with previous versions of Server, there was a way to install an outdated install disk (a point release or 3 behind) and then run the necessary installation updates...either through target disk mode or on to a separate boot disc.
So, with my 10.6.0 Server Install disc, I am not able to do so in either scenario because a) My other admin machine is a MB Pro and the installer performs a hardware checksome preventing install...so no Target Disk Mode, and B) Install on other disc from mini, again Hardware checksome since hardware not recognized.
I am looking at options to enable an install with my disk short of having to physically walk into Apple (a huge trek) and get a new install disk or ask Apple Support to mail one.
So, again... Any options from OS X Server Admins out there?

VGA monitor and a 2010 Mac Mini - HELP PLEASE!

Similar Messages

Maybe you are looking for