VGA Problem in Tx21075

I am using this tablets since 2 months now but suddenly today when I started my tablet there were 2 white line on the screen horizontaly that divided the screen in 3 parts. i waited for the tablet to boot and then windows started. the only thing I could see was the upper division where the colours appeared but the other 2 parts were black with the ame 2 lines. then I rebooted and the problem disappeared. when I started it the second time same thing happened but didnt disappear on reboot. Then I put the tablet in sleep mode and on awake it was gone and I coud see everything. but now even the sleep thing doesnt work. I don't know this is BIOS problem or VGA card problem or LCS connection problem. Someone please help

Slow down the processor to its normal speed and check if it is ok

Similar Messages

  • Mini DVI to VGA problem

    Hello,
    I just recently bought the mini DVI to VGA adaptor for my new MacBook because I wanted to use my laptop as a dvd player and plug it into the TV in my room. The TV is a Samsung LCD ln S1951W, when I plug it in the computer detects the display but the TV still flashes the no signal thingie. I've tried it with a proyector and it works fine. It's not the vga-vga cable because it works fine when i connect my iBook. Could anyone help me fix this problem please?

    If you are just using it for that specific screen (just for the moment use a workaround). I have the same screen.
    Download SwitchResX and make the following setup under "Custom" 1360x 768 at 60Hz. Restart for the settings to be available. It should solve the flashing problem for this specific screen.
    If you don´t want to pay for SwitchResX, just check that the new resolution settings are available in the normal mac display options (which they should) and unistall it... the settings will be stored and you can use them indefinitely.
    Wait, just re-read your post, you are not getting any signal at all? Then I have no clue if this will solve it. Try it anyways.
    Cheers.

  • Mac Mini mid 2011 Mini Dvi to VGA problems

    I have a mac mini mid 2011 and I have to connected to a display in work.  The display only has a VGA entrance, so i bought a mini dvi to vga adapter from my local mac store, but when i connected to the display everything looks odd, the whole display has an odd purple look, I have tried to use a different VGA cable but keep having the same problem, I even tried a different display with the same results, anybody knows why this happens and how to fix it?

    Your welcome!
    On your end before returning the Adapter,
    try > Resetting the System Management Controller
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Wait fifteen seconds.
    4. Attach the computer's power cord.
    5. Wait five seconds, then press the power button to turn on the computer.
    and > About NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.
    then if that doesn't help, return the adapter and explain the problem to the Apple tech person at the store.

  • Mini DVI to external monitor (VGA) problem/firmware update does nothing

    Hi,
    Four months ago I bought a new white 13-inch Macbook (2006 model I believe) along with a handy mini-DVI - VGA adapter. I used a Hanns-G HU196D external monitor which worked fine for a couple of months but then stopped, and had the same problem with a (much cheaper) 'LiteView' monitor. I find it bizarre how they work absolutely fine and then stop, with no damage to the adapter, cable or ports. I've since bought a new adapter and cables + trying out a different monitor and still the same problem...
    I've installed a firmware update that describes the exact symptoms, but it's done nothing. Can anyone help me resolve my issue?? It's still under warranty so is it an unusual problem that'll need to be fixed by Apple?
    Thanks

    Are you using the mini DVI to DVI followed by a DVI to VGA adapter? That may not work if the mini DVI to DVI adapter does not pass analog video. If that is the case, you need the mini DVI to VGA adapter:
    <http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wo/2.RSLID?mco= 17927D0B&nplm=M9320G%2FA>

  • Mini Displayport to VGA problem - not recognizing

    Hi all,
    First, thanks for your patience as I am new to these forums and thanks for reading and hopefully helping.
    We purchased an apple branded mini DP to VGA adapter about a week ago from an auth. reseller in Prague (US expats). We are using the adapter to watch video from our MacBook Pro on an Epson projector. Everything worked great for about a week and all of a sudden (truly, no software changes, updates, dropped adapters, etc. etc. etc.) it stopped working. By "it" I think I mean the mini DP adapter or the plug itself. The reason I think this is b/c the computer doesn't even recognize when the adapter is plugged in; previously, when plugging ONLY the adapter into the mini DP plug, the screen would flash blue, now - nothing.
    I have reset PRAM and the SMC and still no change. I checked when I first purchased the adapter and found that the firmware was indeed up to date.
    Any ideas? Hoping for insight before having to deal with the extraordinary language barrier.
    Thanks again.

    Hello
    I have this Problem too, my monitor best resolution is 1680 X 1050 but I can not set it, i have only 1600*1200 or 1440*1050, what can I to do?
    but i don't have this problem with my MacBook Pro 10.6.4, I have best resolution 1680*1050
    Emad Falsafi
    Message was edited by: Emad Falsafi

  • Mini DisplayPort to VGA problem

    Hi, all!
    My New MacBook can't work with external display with resolution more then 1360x768 using Mini DisplayPort to VGA connector.
    Then I'm setting bigger resolution (for ex. 1920x1080) display shows me picture for a 2-3 seconds, then switches off, and on again.
    Tested 3 monitors and one tv.
    Any suggestions?

    Hello
    I have this Problem too, my monitor best resolution is 1680 X 1050 but I can not set it, i have only 1600*1200 or 1440*1050, what can I to do?
    but i don't have this problem with my MacBook Pro 10.6.4, I have best resolution 1680*1050
    Emad Falsafi
    Message was edited by: Emad Falsafi

  • Thunderbolt to VGA problems.

    Folks, I just setup two Mac Pro computers (late 2013 cylindrical model) and am having problems on both with Thunderbolt to VGA adapters.  I get a line at the top of the screen that flickers at a constant rhythm of sorts and the desktop doesn't fill the screen.  In fact the dock is pushed a little down  beyond the edge of the screen.
    I have two 24" monitors plugged into both computers.  There's no problem with anything plugged in via DVI or HDMI, but it does affect these two brand new out of the box Samsung and HP monitors connected via Thunderbolt to VGA adapters.
    I found this link and firmware to try and remedy the problem, but when run it just said it couldn't find a supported MiniDisplay Port to VGA adapter.
    Any ideas folks?

    I suspect that the firmware is only applicable to one specific brand of adopter.
    I have used Apple mini displayport to VGA adopter on my 2013 Mac Pro without problems for 1080p like your HP monitor.
    I suspect a problem with the adopter. However, try resetting the SMC and PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM
    otherwise try another brand adopter. I would try min displayport to either HDMI or DVI if you can get them and get the right cable

  • VGA problem with FiFA 2003 and Audio Problem with NHL2003

    i use onboard VGA
    800 x600for both games
    with no problem
    but for Fifa 2003
    the screen looks so dark...
    all players look like a black people(all  black color hair
    and black face))
    some audio problem with NHL 2003...

    Have you tried the following?
    Adjust monitor settings? i.e. contrast/brightness
    Video settings within the game? Some have gamma or brightness settings.
    Gamma correction in "Display Properties"?
    for starters anyway......

  • VGA problem with K7N2GM-IL

    :bonk:Hello I have a big problem with my Mobo K7N2GM-IL
    on the mobo is latest bios,latest VGA and SYS drivers,clear new install WXP PRO SP1 but after run
    windows media player with DIVX,DVD and OTHER video files my computers works only 2-3second then totalyy freezed/no possiblity run Task Manager/and now restart with report "WINDOWS XP PRO SP1 is booting after Serious Error"
    this same problem is after running Max Payne2 game 2-3sec sound and video then restart after serious error
    Please help me if you can Thanx Matus

    psu max amps  Moan Guide

  • MOVED: MSI vr330x vga problem

    This topic has been moved to MSI Notebook.
    https://forum-en.msi.com/index.php?topic=144982.0

    Hi again,
    Have you tried updating to Win XP Service Pack 1 yet?
    Else, you may want to try this weird method as some gave a shot and the problem's solved, but not to everyone...
    Boot up using the the cards that work, next, shutdown com(do not un-install drivers), put in the Leadtek card, boot up and see if there's the original 16bit colors with 800 by 600 res screen while starting up windows, if it does, try installing the drivers for WinXP/2000 by manually selecting the location as XP has a problem in detecting XP's VGA drivers, restart and see if problem persists.
    All the Best... :D!!!

  • KT3 Ultra2 R and VGA problem

    I wonder if I could please get some ideas as regard this rather odd problem which I am encountering. This problem occurs when while the pc is 'shut down' if I disconnect the power supply ie switch off power by way of the switch on the psu. When I switch power back on again and boot, the pc begins its booting sequence it begins to launch windows and then it stops and a little red square (with a bit of green) appears in the top left hand corner of the screen. Now this problem does not occur if I shut down the pc normally (but don't cut off power supply). I have several partitions on my HDD and they are all affect at the same time. The end result is that I boot into safe mode I look at the refresh rate which is set to 'unknown' change it to 'adapter default' then reboot but upon reboot I get windows displaying screen at 640x480 with standard vga colours. I check in device manager under 'display adapters' what driver it's showing and it's the driver which I last loaded ie the correct one. I cannot change screen resolution , bit colour and the refresh rate only allows for 2 options, either 'optimal' or 'adapter default'. In order to get back to where I was, I have to remove and re-install my VGA driver and then everyting is back to normal (until I switch off power again at psu then back to square one). I have spoken to the manufacturers of the graphics card and they say that if the card works ok when I shut down pc normally and restart then cannot be the card. I described my problem in greater detail to MSI support and they said either VGA or O/S.
    In essence I wanted to isolate the problem to, is it 'hardware or 'software'.
    I would be grateful if anyone can shed some light.
    KT3 Ultra2 R   (5.5   not the right one but the cpu clock speed is correct at post)
    XP 2600+ 333 T'Bred
    Crucial 512 Mb PC 2700
    Leadted Ti 4400 128 MB Vivo (det 44.03)
    Creative Audigy
    Enermax 432W
    Windows 98SE (via 4-1 v 4.34)
    Seagate 60Gb 7200rpm   I am running the HDDs as independant drives on the
    Seagate 40Gb 7200rpm   Raid controller ie one on IDE3 & one on IDE4

    Odd as it might seem I have to follow the proceedure listed below if I want to switch off power altogether to work on my pc.
    1. Cold boot system with 166FSB and let O/S install
    2. Reboot enter Bios and reduce FSB to 133 make sure to set memory speed as HCLK and let O/S load
    3. Shut down and switch off power supply
    4. Reconnect power and boot system. Enter bios set FSB to 166 (the mem speed will be HCLK)
    5. System continues to boot and loads O/S
    From that point on, cold boots (without cutting power supply) are not problematic as once the 166FSB is 'registered' everything works ok (at every cold boot). So anytime I wanna work on my pc I guess I have to do the above 5 steps. They seem to work but need to try it out a few more times before I am confident that this process will always work.
    I am sure you agree that this is one strange mother of a problem.
    I suppose the only 2 things left are a total O/S reload or trying another 333 cpu because I have tried everything else.  I guess I will have to live with it.
    I have also cut some additional front vents so that front fan draws more air in and it appears to have dropped my idle Temp to 40.5C on CPU (running at clock 2083Mhz).
    As as said earlier in my post my system ran perfectly with XP2000+ and 512Mb PC2100. I merely upgraded the CPU to XP2600 and mem to PC2700 and it has thrown up this very odd problem. And to boot (if you will pardon the expression) when I first installed new CPU and memory it booted first time at 166FSB. osnavi, in case you upgrade your CPU to a XP2600 and you get this weird problem at least you can come back to to this thread and find this workaround.
    I wonder if anyone can fathom out why this is happening.......If not as I said I can live with it.
    wonkanoby, I will try the link to the memtest. That is the only thing I have not tested so will give that a try.
    -MSI KT3 Ultra2 Raid
    -AMD XP2600+ 333 T'Bred
    -Evercool CUD 725 Cooler
    -2x256 Mb PC 2700 Crucial
    -Leadtek Ti4400 128Mb Vivo
    -Creative Audigy
    -LiteOn DVD 16x
    -Liteon CDR48125w
    -HP CDR 9710i
    -Seagate Barracuda IV 60Gb (I am running the HDDs on the raid
    -Seagate Barracuda IV 40GB controller as 2 independant drives)
    -2 Case fan
    -Enermax 431W

  • Dka 790gx platinum vga problems

    im running a new build with the dka790 gx platinum mobo and an amd x4 9950be. i have updated the bios to v 1.6 ,o.s. is vista ultimate. problem is using the onboard vga , after  the post screen and the progress bar for windows ,the screen goes black and no picture, even worse is using my xfx geforce 2 8500 card, the screen is distorted on boot up , but if i leave it running for 3 minutes, switch it off and reboot its perfect? any ideas guys?
    dka 790gx platinum ambios v1.6
    amd phenom 9950 be
    2x2 crucial pc2-6400 800mhz ddr2
    hitachi deskstar 7k1000 1tb sata 11 32mb cache
    600w psu
    xfx geforce 8500gt itb ddr2 pcie 800mhz

    Shows us full details about hardware used, read >>Posting Guide<<

  • MSI 865PE VGA problem wrong color

    I have just purchased a new motherboard, the MSI 865PE Neo2-FIS2R. Now all the colours on the screen are wrong. Example: In a window in Windows XP, the white has turned black and the text is still black. All other colours are wired. I have updated the BIOS and drives for the motherboard and the VGA card and nothing seems to help. I have then tried to change the VGA card to my old Geforce 2 and it worked perfect. I used to have the Winfast card working with a Soltek SL-75FRN-L motherboard and it worked perfect. What can the problem be and how do I solve it,
    does any one know??
    CPU: Intel P4 2800 MHz FSB800
    Motherboard: MSI 865PE NEO2-FIS2R
    VGA Card: Leadtek Winfast A250 LE TD MY VIVO 128 MB
    Power Suppy: Thermaltake 420W
    Ram: Kingston DDR433 PC3500 2x256 MB HyperX
    HDD: Raid with 2 DiamondMax Plus D740X 60GB Fluid
    DVD: Asus DVD-E616
    CD-W: LiteOn LTR-40125S
    OS: Windows XP

    Hi again,
    Have you tried updating to Win XP Service Pack 1 yet?
    Else, you may want to try this weird method as some gave a shot and the problem's solved, but not to everyone...
    Boot up using the the cards that work, next, shutdown com(do not un-install drivers), put in the Leadtek card, boot up and see if there's the original 16bit colors with 800 by 600 res screen while starting up windows, if it does, try installing the drivers for WinXP/2000 by manually selecting the location as XP has a problem in detecting XP's VGA drivers, restart and see if problem persists.
    All the Best... :D!!!

  • Lightning vga problem?

    HI, I'm trying to use the official Apple lightning to vga adaptor in my iPhone 5, however whenever I plug it in I get a message saying that firmware download is in progress and I will be unable to use the accessory until complete. But the process never seems to complete and the adaptor doesn't worK. Any ideas? Thank you

    I Normally hate remarks like the one I'm about to make, but it is actually apple saying "just buy the latest ipad!"
    I had the exact same problem yesterday. I found out I couldn't use a projector anymore, when it worked just fine last week.

  • KT6V a)LAN LED and b)vga problem

    Hi everybody,
    Recently a friend of mine bought a KT6V-LSR, there are two things going on firstly, the led of activity on the LAN jack at the rear panel (backbone) doesn’t flash at all, it stays always on, other pc on the same switch with an MSI motherboard doesn’t have a problem (the led flashes during activity). Does anybody have the same motherboard and have checked that led?
    Secondly a problem mentioned by an other person here in this forum, the screen turns to black for 1-2 seconds in windows without a specific reason the VGA is a Gigabyte nvidia 5200 128MB, the problem most of the times appears during overlay, powerdvd and windvd, but also in windows while surfing, the PSU is fine it used to work with a ATI-9800Pro. Does anybody have the same problem?
    Thanks for the help!

    i´m having the same problem as you
    In the lan case it works perfect but the led don´t flash .this is not a big deal but the other one aparently to be a problem beetwen video and motherboad (AGP, bios or driver nvidia in my case)
    becouse if you see (I have win xp installed SP1) check in panel control, admistrative tools icon, and go for succes visor , select system and look for an error with the following description
    " a device has enter in an infinite loop and windows could estabilizase the system please save your work a reboot"
    i still don´t know  what to do first i´m thinking in flash the bios
    My system configuration:
    XP 2600 FSB166 Cache 512MB
    MSI KT6V LSR Bios version:
    MEM 512MB Kingston DDR400 CL3
    VGA Biostar GF4MX440 64MB DDR AGP8x
    Miro DC10plus Version 8.0
    Power Supply 400W Sunshine
    Encore Modem 56kbps chips ambient (Intel)
    40gb 7200RPM MAXTOR
    80GB 7200RPM Western Digital
    Please help us!!!!! Thanks

Maybe you are looking for