Vgp ac19v18 probelm

Hi algnerd,
Thank you for considering Sony Community!
My suggestion is to troubleshoot the laptop and the AC adapter first. You can save time and money by doing this. You may follow the guidelines here:
Check the AC adapter, look for possible hardware issue. The light indicator should be green.
Power cycle - remove the battery and all peripherals -> press and hold the power button for 5 seconds. Or (if the battery is not removable) remove all peripherals -> look for a battery off button on the bottom of the laptop -> press and hold for 5 seconds (you may use safety pin for that). This will drain the electricity of the computer. Charge again the laptop and test.
Reset BIOS. - While the unit is restarting, immediately keep tapping F2 key -> Once in BIOS, go to Exit tab -> select Get Default Values or Load Optimize -> hit Enter -> Save changes and exit. Restart the computer.
Download or update these drivers: Sony® Firmware Extension Parser Device Driver, Sony® Shared Library (by visiting Sony's website based on your location or from where you purchased the laptop).
Battery Care Function is a feature that limits the amount the battery will be charged in order to help extend the useful life of the battery. You may disable it to isolate the issue as well.
For further assistance, we kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/.
Hope my suggestions help.
Best regards,
Vincent
If my post answers your question, please mark it as "Accept as Solution"

Hi,
I have a Sony VPCF24P1E running windows 8.1 pro 64bits, its AC adapter is a VGP-AC19v18.
The problem is that its stops working from time to time for a couple of days (~15days)
More about the problem: for example the first time it happened, I unplugged the AC adapter and went to sleep the next morning before going out to by a new one, I've tried it and it worked perfectly.
Few days later, the same thing happened (Last Thursday (around 4AM)): tried to unplug it and plug it and it worked. The same day around 11am~12pm the same problem occurred once again and today (around 3~4AM) the same thing happened.
Currently the AC Adapter is working and charging the PC.
The question is: what is the problem? Is it solvable or should I by a new one?
PS: I'm using Battery Care option in VAIO Control Center: charging the pc only to 80% because my pc is constantly plug to power.
Thank you!

Similar Messages

Facing probelm in PF status in ALV Grid display

HI,
i have created a ALV grid intractive report in that i have a check box and Traffice lights , when user select the check box and press save then then traffice light color should changes to green it's doing well..but my problem is..for second time display i am calling same function module to display with chnaged traffice light color.here my probelm is after second time display when i press back it's taking me to first list not to the selection-screen. pls suggest me wot to do now for directly going to selection-screen.
Thanks,
saleem.
points to awarded for all usefull answers.

Hi again,
1.
 and press save then then traffice light color should changes to green it's doing well..but
U must have written some code
when the BOLD occurs.
2. This must be the call back command
(FORM subrouritine, which the alv call backs,
 on a user command)
3. In the same u have to write.
4. For your reference,
 just copy paste this code.
a) it will show records from t001 table
b) if u double-click on any row,
 it will change the 2nd column to 'CLICKED'
 and refresh the data again.
 (it won't show alv once more in new screen)
c) then when u do back, it will go back.
d) See BOLD code.
5.
REPORT abc.
TYPE-POOLS : slis.
Data
DATA : BEGIN OF itab OCCURS 0.
 INCLUDE STRUCTURE t001.
DATA : flag tyPE c,
 END OF itab.
DATA : alvfc TYPE slis_t_fieldcat_alv.
DATA : alvly TYPE slis_layout_alv.
Select Data
SELECT * FROM t001 INTO TABLE itab.
*------- Field Catalogue
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
 i_program_name = sy-repid
 i_internal_tabname = 'ITAB'
 i_inclname = sy-repid
CHANGING
 ct_fieldcat = alvfc
EXCEPTIONS
 inconsistent_interface = 1
 program_error = 2
 OTHERS = 3.
Display
alvly-box_fieldname = 'FLAG'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
 it_fieldcat = alvfc
 i_callback_program = sy-repid "<-------Important
 i_callback_user_command = 'ITAB_USER_COMMAND' "<------ Important
 is_layout = alvly
TABLES
 t_outtab = itab
EXCEPTIONS
 program_error = 1
 OTHERS = 2.
CALL BACK FORM
FORM itab_user_command USING whatcomm TYPE sy-ucomm whatrow TYPE
slis_selfield.
IMPORTANT.

data : m type sy-index.
m = whatrow-tabindex.
itab-butxt = 'CLICKED'.
modify itab index m.
whatrow-refresh = 'X'.
ENDFORM. "ITAB_user_command
regards,
amit m.

We are facing some probelms with reports6i

hai,
I am facing some probelms with reports6i.
1.when i try to mail one report it is coming in the 'eps' format.how
can i open this format.
2.we are calling the report using the command line method not
run_product.for these reports 'Generate to File' menu is not working.It say
an error like Umimplemented Error (rep-0999)
3.In one report we are using clob field.but when we take the print output of
this field some of the characters are missing in paper.the problem what we
think is that, there is no entre key padding when a word wrap is
occuring.We have to give it manually which is not applicable in all
cases.Please give some methods to solve these probelms.
Please treat this as an urgent matter.
thanking you,
dilip

If you have not set desformat you will get a file format determined by the driver of your default printer (even though you are not printing !). The file extension always seems to be .eps regardless of whether it is actually an eps (postscript) file.
You can get other formats eg. pdf by setting desformat.
If you do want to work with eps files you can download 'Ghostscript and GSView' which can display and convert them.

Probelm while installing windows 7 on MacBook pro through bootcamp? I am getting a black screen during installation

Probelm while installing windows 7 on MacBook pro through bootcamp? I am getting a black screen during installation

Apple Support Boot Camp
Is there any article in the above?
did you read the pdf before beginning from Boot Camp Assistant?
Did you upgrade to Lion or was it pre-installed?

ALV to Excel Export Probelm

Dear All,
I want to export 80 Cols. ALV report of more than 3000 cols. into Excel, It doesnot export all the cols. but only export 28 cols. What can be the probelm
Regards,
Sohail

hi,
please go to the following link
[CONSISTENCY CHECK|http://help.sap.com/saphelp_sm32/helpdata/EN/d6/23253963143e6ae10000000a11402f/frameset.htm]
hope this helps you to solve your problem
regards
Ritesh

Many probelm in nokia belle fb2

1-can't open front camera(in belle fp 1 i can)  2-can't close camera(in belle fp1 ican)  3-sound of radio be slow(in pack 1it's the best sound of radio in all phone)  4-can't open many app it said close some application and app will close by iself and can't play asphakt 6 (in pack 1 ican open mora than 10 app and game and it never said close some app and all games play very good).  5-when capture image or video it show at the last of garllay.(fp 1 show in front gar)  6-can't select many items in garllay to sent.(in fp1 i can)  7-some music like last album of lil wayne and tylor swift can't be frowad or preview.(all music play normally in fp1)  8-mkv video format said audio not support and allso can't forward or preview the video.(mkv video work very good and never said audio not support )  9-in landscape music app only show album and can't open playing now.(in fp1 i can go to now playing or view song in landscape)  10-can't open two wep side and browser in desktop mode the browser will close.(in fp1 i open many websites like music,sport,download in same time in it never close by itself or slow)  11-in arabic keyboard there's letter don't show unless you press shift and that very bad in chat(in fp1 show alk letter in one place)  12-can't create new office world or exel in arabic letter only in english letter.(in fp1 i can)  All this probelm is not in belle pack 1  belle pack 1 is the best symbian from all other symbian the only problem in it can't play rmvb file  please how i can return to belle pack 1

@abdo7777
There is there is no way to downgrade the firmware of a Nokia device.
Whilst there is no on-screen way to exit Camera - instead, you have to press the red/hangup button.
Furthermore the front camera does work, you need third party application to access front camera of which Scam is an example from Nokia Store:http://store.ovi.com/content/249918
Happy to have helped forum with a Support Ratio = 42.5

Check probelm

Hi experts,
 I am excepting correct answer .
 I have probelm with check printing while giving single printing my data is printing correctly.
 when i am giving continuous printing for 4 or 5 .
 my data is moving one line above for each page .
 I am using dina4 page format.
 i am printing on preprinted check its size is 8.5*12 inches.
 i created my own page format for 8.5*12 inches even also its giving same probelm.
 if any one suggesting me good path i will appreciate them .
advanced thanks .

Hi venkat..
go to tcode SPAD..
click FULL ADMINSTARATION and select DEVICE TYPE tab.
In that Click Print Control and change the coding according to ur ZPAGE FORMAT.
for example..
Printer Initialization :-
reset
\e\0x40
designate codepage IBM 850 for slot 0
#\e\0x28\0x74\0x03\0x00\0x00\0x03\0x00
select codepage from slot 0
#\e\0x74\0x00
select US-ASCII character set
\e\0x52\0x00
set line spacing 6 LPI
\e\0x32
# set page length to DINA4 (=70 lines at 6 LPI) " here mention ur Z PAGE FORMAT Insted of DINA4
\e\0x43\0x48
cancel bottom margin
\e\0x4F
set left margin to 0
\e\0x6C\0x00
select LQ quality
\e\0x78\0x01
select non-proportional spacing
\e\0x70\0x00
continue like this,
if u have doubt get back to me,
If it's helpfull rewards points for my TIME share,
Regards,
Chandru.s

Smartform Printing Probelm

Dear Experts,
I faced a probelm while i am trying to take print the smartform. It's shows Graphic is not displayed message shows.
what is the probelm please guide me.
Thanks in Advance
purnaneelu

check there is no mismatch in black n white and color..
may be this is the possiblity. that u uploaded graphiv in B&W andusing colour.
had u check window size problem ?

PROBELM WITH TYPE X VALUE '20' IN CONCATENATE STATEMENT in ECC version

Hi EXPERTS,
 I am working in ECC 6.0 version.
 PROBELM WITH TYPE X VALUE '20' IN CONCATENATE STATEMENT in ECC version
 C_DEL TYPE X VALUE '09' having solution --C_DEL TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB,
 If C_DEL TYPE X VALUE '20' what was the solution in ECC version.
 Please let me know. I am awaiting for ur answers
<REMOVED BY MODERATOR>
Message was edited by:
 Alvaro Tejada Galindo

Hi
welcome to SDN forum
move that X field to a char field and use in concatenation
CONCATENATE works only with CHAR fields
Regards
Anji

ALE IDOC : Probelm in outbound idocs.

Hi,
I am sending an outbound idoc from system A to System B. In we02 i see the idocs are generated successfully with *Status 03 Data passed to port OK.
*With message "The IDoc was sent to an SAP system or an external program via a transactional RFC."
"The TID is xxxxxxxxxxxxxxxxxxxxxxxx'.
But the Idocs have not reached Sytem B.
I checked SM58. Here I see the for TID xxxxxxxxxxxxxxxxx
the below message
"ALEREMOTE | IDOC_INBOUND_ASYNCHRONOUS | SYSTEMB 'No authorization to send IDocs with message type'
*I have send the same IDOC from SYSTEM C (Sandbox) to SYTEM B. *This works and the user profile is same in SYSTEM C and *SYSTEM A.
I am not able to trace the probelm. Can somebody help here.
Also if anybody can help me understand what happens when a outbound idoc is susccessfully processed with status 03.
Is there a program that processes the idoc after status 03 using TID no.
Please help

hi martin,
when i send it from system c (sandbox) with same user the idocs are not in error. but when i try to post the same from system A with same user with same profile(already checked with basis) the error occurs.
can give some hints what could be the reason.

Transportation probelms with objects

Hi
most of objects we installed bsuiness content, and migrated to 7.0 and amde some enhancements and moving quality each time request is getting failed like some objects are inactive for each module. its defficult to check each object ( char and its contain attributes are active ior not)
is theer any process i can check while collecting what are objects are inactive?
2nd probelm is
i replicated all datasource from ecc quality to BI quality
then i am sending migration an dactive version of datasource to BI quality
i am collecting all flow. why while transportating again data source is going source system for replication process?
any setting we need to adjust, bec its taking long time
ple let em know

Hi,
1. First you check all master data InfoObjects are Active or not?. Eg: take 0MATERIAL and check all Objects with in that i.e. Attributes, NaviGational...are active or not?. In this way you collect all InfoObejcts Information in one Excel sheet and then Transport all Ativated InfoOBjects to BI Qty.Then you send all Cubes/DSO's and so on....
2. First you Transport the datasources from ECC Dev to ECC Qty and then Replicate all DS'S in BI Qty system and then You transport the Transfer/Update/Tranformations/DTPS from BI Dev to BI Qty.
Thanks
Reddy

Probelm in VA01 Sales order creation!

Hi,
I faced probelm in while creating sales order.
My probelm is, deleted line items are not getting updated in the internal table XVBAP.
Please find my testing scenario:
Enter the material number => in my example, it will be the Mat_test1.
Enter a second material number=> in my example , Mat_test2
Check if the sales order is completed = but DON'T SAVE
Select the material number mat_test1 => delete the line item
Now get into debug mode and check the internal table XVBAP. It is still having the deleted line item mat_test1.
Is there anyother internal table getting updated?
I required this internal table XVBAP from SAPMV45A in another include (RV61B925) for my requirements without having the deleted line item in the internal table.
Please help me to clarify this issue!

When working with the XVBAP internal table, the line item will not be deleted from the internal table. There is a field on the table called UPDKZ that contains the action that will be taken with this field:
'U' = Update
'D' = Delete
'I' = Insert
' ' = No action
You will need to make sure that you are checking this field for any of your logic. This is true of all of the Xnnnn internal tables during sales document processing.
Chris

If you had connection probelms this might help..

I was having the 11333 erorr when i tried to connect to itunes store.
So i contacted Microsoft for help since it was a network connection probelm.. and they fixed it within 24 hours..
First make sure you disable your pop-up blocker while your fixing your connection and your firewall. You can turn it on as soon as its fixed.
Go ahead and reset your proxy..
1. Open Internet Explorer.
2. On the Tools menu, click Internet Options.
3. Click the Connections tab, click LAN Settings, and then click Advanced.
4. Delete any entry in the Exceptions section.
5. Quit Internet Explorer.
6. Click Start, click Run, type cmd, and then click OK.
7. Type the following commands. Press ENTER after each command.
proxycfg -u
proxycfg -d
That should reset the proxy and allow you to have full access to the store..
I hope that helps you guys...

Didn't help me but oh well, I'm just waiting for Apple to fix it with a update or something.

Does Mac OS X 10.8 Mountain Lion work on my mac W8******VGP

does Mac OS X 10.8 Mountain Lion work on my mac W8******VGP
<Edited by Host>

Sorry, but no....
Your Late 2006 could go to OS X Lion (10.7) - Apple Store (U.S.), but I recommend keeping it on Snow Leopard 10.6.8
If you are wanting or needing to run Mountain Lion or Mavericks, then you will need to get a newer model Mac.

Never ending Probelms with JSF

Hi,
I was just wondering if JSF is all hype but has no real value in it.
I have been using for about 3 months. I have faced problems with it at almost every stage.
1. Validators / Converters are not mature ( Why there is no attempt to integrate mature stuff like Commons-Validator which is already available. I am sure that every one of us agrees that vadation is very important for all web applications. I am aware that it possible to implement custom validators with JSF. But I feel the most comonly used ones should be available off the shelf.
2. Consider
<h:inputText id="text2" value="Please enter your text" rendered="false"/>
If the rendered attribute cannot take a runtime expression value ... what is good for or what is the prupose behind having such an attribute ..... !!!!. This is just one instance there are many situations like this.
I need to be able to choose whether a text field is rendered or not based on boolean value that is available as request attribute.
3. There are innumerable probelms when we Tiles with JSF components.. For example if we have html content interleaved between JSF component tags. ... The Layout inspite of having proper definitions does not get rendered properly....The implementation of JSF Panel Grid is too restritced...
4. There are many people out there implementing JSF components but they are buggy / incomatible with other implementations.... take for example ourfaces , myfaces , JSF reference implementation and Oracle's ADF are NOT compatible with each other... so what is this all about...
Does anybody here have an idea as to how much time it would take for JSF to become stable enough to be used for Production applications...
Any comments / suggestions are welcome
Thanks in advance,
Ram Kishore.

Hi,
I was just wondering if JSF is all hype but has no
real value in it.
I have been using for about 3 months. I have faced
problems with it at almost every stage.
1. Validators / Converters are not mature ( Why there
is no attempt to integrate mature stuff like
Commons-Validator which is already available. I am
sure that every one of us agrees that vadation is very
important for all web applications. I am aware that it
possible to implement custom validators with JSF. But
I feel the most comonly used ones should be available
off the shelf.More off-the-shelf validators would be good, I agree.
2. Consider
<h:inputText id="text2" value="Please enter your text"
rendered="false"/>
If the rendered attribute cannot take a runtime
expression value ... what is good for or what is the
prupose behind having such an attribute ..... !!!!.
This is just one instance there are many situations
like this."rendered" does support dynamic values; just use #{} EL expressions.
I need to be able to choose whether a text field is
rendered or not based on boolean value that is
available as request attribute.
3. There are innumerable probelms when we Tiles with
JSF components.. For example if we have html content
interleaved between JSF component tags. ... The Layout
inspite of having proper definitions does not get
rendered properly....The implementation of JSF Panel
Grid is too restritced...I think you're describing two separate problems here:
(1) Needing <f:verbatim> is annoying. We (the EG) know; we're working on it.
(2) More panel renderers would be good; you can look to component libraries (ADF Faces as one) for additional layouts.
4. There are many people out there implementing JSF
components but they are buggy / incomatible with other
implementations.... take for example ourfaces ,
myfaces , JSF reference implementation and Oracle's
ADF are NOT compatible with each other... so what is
this all about...OK, hold up here. There's some lump of claims here, and I don't know what you're specifically saying. It sounds as though you're saying component developers are writing buggy code, and therefore don't work with every implementation. With regards to Oracle's ADF Faces, we of course work with the JSF RI. We're close to working with MyFaces, but there's some issues remaining in MyFaces (perhaps already resolved) that block this. These aren't ADF Faces bugs. Expecting MyFaces to be perfectly compatible when it is not yet certified or described as production level is infeasible.
(I can't speak for ourfaces.)
-- Adam Winer (JSF EG, and ADF Faces)
Does anybody here have an idea as to how much time it
would take for JSF to become stable enough to be used
for Production applications...
Any comments / suggestions are welcome
Thanks in advance,
Ram Kishore.

Vgp ac19v18 probelm

Similar Messages

Maybe you are looking for