VHD Partitions and extending C Drive

I have a server 2008 Standard (Not R2) SP2 VM on Hyper-V.
This VM has a 300 GB VHD which, at the time of setting up the VM, is devided into a 30 GB C drive (OS partition) and 270 GB D drive (Data partition).
I want to extend C drive by another 30 GB so what I did is to shut down the VM, extend the VHD by 30 GB and restarted the VM.
I can see these 30 GBs in the "Disk Management" as "unallocated space" but it doesn't let me extend my C drive to this unallocated space no matter what I do.
For the start, "Extend Volume" is grayed out and diskpart.exe didn't help either.
The VHD in the "Disk Management" appears as a Basic disk.
Please help.

Obviously, the 30GB of unallocated space is not exactly behind this C drive. But, if you insist, you also can take chances with some professional partition resizing tools like GParted, IM-Magic Partition Resizer Free and Active Partition
Manager and more.
Of course, you’d better back up everything important well before you begin to resizing your partition in case of unwanted data loss.
Here is a useful article that can help you a lot about partition resizing stuff:
http://partition-magic-free.com/windows-server-2003/resize-2003-system-partition-partition-magic-free.html
Good luck!

Similar Messages

  • Thunderbolt partitioned and formatted hard drive not recognized on USB2/3

    I have a MBA (mid 2012) and recently purchased a Seagate Desktop Thunderbolt Adapter (STAE129), a Seagate Backup Plus 4TB USB 3.0 external drive (STCA4000100), and Apple Thunderbolt cable. The 4TB hard drive can be separated from the USB 3.0 adapter and the drive placed on the Thunderbolt adapter. I created two partitions (3TB and 1 TB) on the 4TB drive while it was mounted on the Thunderbolt adapter and formatted them Mac OS Extended (Journaled) using partition map scheme GPT. Everything works as expected, the drive hits r/w speeds in the 180 MB/s range (using Blackmagic Disk Speed Test), and no issues at all transferring data to the 3TB partition and using the 1TB partition for TimeMachine.
    However, if I disconnect the hard drive from the Thunderbolt adapter and place it on the USB 3.0 adapter and connect it to my MBA, Mountain Lion says "The disk you inserted was not readable by this computer and gives me the options to Initialize, Ignore, or Eject. Going into Disk Utility app, the drive shows up without the partitions I created when the same drive was mounted to the Thunderbolt adapter (just shows disk1s1). In fact, the drive label (Disk Description) is different too and the Partition Map Scheme now shows MBR!
    To try work-arounds, I went ahead and repeated the partitioning and formatting steps with the drive attached via USB 3.0 and all works fine until I put the drive back on the Thunderbolt adapter where once again OSX reports that the disk is not readable. I've even tried a single partition with no luck. In short, the drive partitioned and formatted on Thunderbolt is unrecognized under USB and vice versa.
    Shouldn't the disk preparation and data be consistent across these different interfaces? I would think so. My biggest concern is that if I had a failure in the Thunderbolt setup (assuming the drive itself does not fail), then I can't access my data. This is not a very comfortable situation.
    I'm assuming I've overlooked a very basic detail. Appreciate any steer to solve this problem.
    Thanks,
    Rob

    Thanks for that, I recently ran into the same problem. I even chatted with Seagate tech support and they didn't know the answer.
    My situation is a bit different from you. I bought the 3 TB Thunderbolt version of the drive directly and then purchased a USB 3 adaptor seperately.  You see, I still own a 3 year old Macbook Pro that doesn't come with a Thunderbolt port. I was looking to upgade to a MacBook Air later.  I thought that I might as well buy the TB version now.
    In anycase, my old MacBook Pro won't see the drive when I use the USB3 adaptor. I get the same exact error message as you did. I can't really test it on Thunderbolt since I don't have one.  I'm going to go install the Thunderbolt drivers now and hopefully, it will recognize the drive afterwards.  I'll let you know what happens.
    BTW, I was thinking of reformatting the drive with NTFS so that I can use the drive on PCs. My mac has the NTFS drivers loaded so it's no problem. I hope this won't screw up the Thunderbolt connection later when I do get the Macbook Air?

  • Shrink HFS partition and extend NTFS partition with Disk Utility?

    My 10.7 iMac has two partitions: HFS+ & NTFS. The NTFS was set too small and is nearly full and I want to shrink the echoingly under-used HFS and add the resulting excess to the NTFS one.  Is this practicable?  I can see via Disk Utility that the Mac partition can be shrunk but no way is shown for modifying the NTFS side.  Maybe using a Linux tool is advised?

    You can't. If you try either Windows or OS X or both will no longer boot. You can try a aftermarket disk partitioning program but most that work on HFS partition don't work for Windows and those that work for Windows don't work on Mac extended partitions.
    The only real option is to backup the Windows partition with something like Win Clone then use Boot Camp assistant to remove Windows and the partition then again to recreate the Win partition in a larger size. After that install windows and then use the Win Clone software to restore Windows.

  • Maximum Partition Size for External Drive using DU

    Hello,
    I just purchased a 750g Maxtor USB drive for use with Time Machine. When I went into DU to partition and format the drive I was surprised to find that every time I went to create a single partition using all available space, the operation would error out. I was however able to create two partitions with the largest one sized around 650g or so. I was using the Mac file system.
    This just seems odd to me. Does OS X have a maximum allowable partition size that prevents me from creating one large partition?
    Thanks,
    Robert

    Hi Robert
    You should be able to delete the partition, try again using the instruction in the following article:
    http://macs.about.com/od/applications/ss/diskutilitysize_5.htm
    Dennis

  • I can't delete a partition from my Hard Drive using Boot Camp!!??!!

    Hello. Earlier today I installed Windows 8 to my iMac using boot camp and creating a partition. I've decided I don't like it, and want to remove it. I cannot delete the partition!! Help!!

    How are you trying to delete it? What happens when you try? There is only one way to remove a Bootcamp partition and return your drive to a single OSx partition, use Bootcamp Assistant and choose the menu option to remove Windows.

  • Mounting NTFS,FAT32 and USB FLASH drive

    Problem and problem!!
    I am going to fade up with Solaris 10. Please somebody help me!!
    Problem is with mounting my FAT32, NTFS partitions and USB flash drive (twinmos).
    How can I mount FAT32, NTFS file system and my USB flash drive in Solaris 10??

    cN: the N'th disk controller installed in the system
    tN: the SCSI TARGET id. Also used for atapi, firewire and usb mass
    storage device, but it's always 0. Use to identify a specific disk
    device on the disk controller.
    dN: the SCSI LUN id. For atapi devices this is 0 for master device,
    1 for the slave device. For usb mass storge devices this field could
    contain a value > 0 - for example usb flash card readers often
    present the slots for the various flash card formats as multiple LUNs. For simple usb flash memory sticks, this should be
    LUN 0.
    sN: the slice N from the SunOS disk label. On a media without a
    disk label, slice 2 can be used to access all of the medias contents. Solaris SPARC supports slices s0 - s7, Solaris x86
    slices s0 - s15.
    pN: on Solaris x86 only: p0 is the whole disk (similar to slice s2,
    when there's no SunOS disk label), p1 - p4 are the four primary
    fdisk partitions.
    The ":c" suffix assumes the media contains the fat filesystem in
    a separate fdisk partition, searches the fdisk partition table for
    the first partition containing a fat filesystem, and mounts the
    filesystem from that partition. On Solaris x86, instead of using
    "p0:c" you could also use one of the p1 - p4 device; but the pN
    fdisk slices don't exist on Solaris SPARC.

  • Can't boot from Windows partition or any external drives...?

    My iMac just stopped booting from both my boot camp partition, and any external drives. I tried booting from a bootable flashdrive with drive genius installed, but it just booted OS X. Despite holding TAB, it just boots normally, as if I wasnt even holding it. I also tried installing rEFit, but OS X still ignores it and just boots normally. What's going on?!

    ...wow....nevermind, i just realized that i was hitting tab not option...good lord...ive been running boot camp for a long time too...alright well...thanks anyway lol

  • Lots of extra partitions, and unable to unmount main disk

    So I'm trying to reinstall OS X. I follow the usual instructions by booting into recovery mode with Cmd+R. I attempt to erase the hard drive with the Disk Utility, but it fails to unmount the Macintosh HD partition. "Couldn't unmount disk."
    So then I exit disk utility and fire up terminal to execute diskutil list only to find that there are 15 disks. I recognize the first 3 (main partition, recovery partition, and the dvd drive), but I have no idea what the other 12 disks are (they are all of various sizes with the largest being about 5 megs).
    So my question is twofold:
    How do I clear my main partition so I can reinstall Yosemite (ignoring the error and trying to start the internet reinstall fails on the same unmount error)?
    What are all these other partitions and are they safe to remove?

    If you have actually booted from the SL install DVD, your HD partition should mount & unmount as necessary with no problems unless there is some hardware problem with the HD or a related hardware item.
    First, make sure you are booted from the DVD -- no Finder or user login, Disk Utility available from a "Utilities" item in the main menu bar, etc. Then in Disk Utility make sure you are selecting the correct partition for the erase (or the whole HD if you are reformatting it from the "Partitions" tab).

  • How can I partition my external hard drive into NTFC and Mac OS Extended Journaled?

    I brought a 1tb external hard drive from Western Digital. It currently have one partition which is Mac OS X (Journaled). I want to have two partition, one Mac OS Extended (Journaled) and one NTFC for Windows. When I try to choose 2 partition and choose a partition type, I only get the following choices:
    1. Mac OS X Extended (Journaled)
    2. Mac OS X Extended (Case-Sensitive, Journaled)
    3. MS-DOS (FAT)
    4. ExFAT
    5. Free Space
    I don't want to use MS-DOS (FAT) because I am limited to only 32gb of space and I need plenty of space for Windows files.

    Assuming that  entire drive is GUID and you keep the existing journaled partition.
    Make a second partition that is exFAT (more storage ability than FAT) using DU.
    Then mount the drive on a Windows 7 and reformat that exFAT as NTFS.  But remember that Mac can read and write exFAT natively, but cannot write NTFS without special software.  Perhaps exFAT is what you want.
    But more the the point: is the journaled partition used as a backup device?  If it is, I would leave that drive alone as a backup drive and use a second device for "data only" sharing between types.

  • Partitioning an external hard drive for Mac and PC

    I want to partition an external hard drive (3TB) into 3 even partitions. I want to use one for PC storage, one for Mac storage and the last for Mac backup. Is this possible and how do I do it?

    Drive Partition and Format
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    7. Re-partition the drive to create the three partitions. The one you wish to use on a PC you should format MSDOS (FAT).
    When you connect the drive to your PC it should have no problem reading the partition set up for a PC. Now while on the PC you may wish to consider reformatting that partition using ExFAT (if supported on your PC.) This format is more compatible with both OS X and NTSF supporting long file names and other FAT filesystem irregularities.

  • Best way to migrate existing XP SP3 partition to a virtual machine to run via Windows 8.1 as physical partition and not a vhd?

    Hi I have a current XP SP3 setup have been using in a dual boot with Windows 8.1(on separate partitions on different hard drives - I think these are SATA drives)  but now am thinking of migrating my XP partition preferably as a live virtual machine
    to be run as a guest via Windows 8.1 as host so I don't have to do the rebooting.  Also prefer this to making a VHD of my XP so can use the existing partition allocated for it rather than taking up extra space as VHD on my windows 8 (and don't want yet
    to replace my xp dual boot in case it does not work so well as vhd, as I have a lot of old educational programs my kids still use on it that I don't really want to put onto my W8.1).  Will also save time if I don't have to convert it to VHD first.  I
    also do not want to reinstall a new XP Sp3 virtual machine from scratch for same reason - will take too long to resetup -just use existing as is.
    I have used VMWare player and Virtual Box in past with an old 98SE system as a virtual VHD/VPC file but VMWare workstation is paid which may be the one I need to use a physical partition but I prefer to try freeware options first.
    Will Hyper-V in Windows 8.1 (I have retail PRO version of both my XP and Windows 8.1) be able to do the same as VMWare workstation?  OR is there another option to run the physical XP?
    The other thing with my XP setup is that the user profiles that people login with are located on a different partition E (80GB) to my XP which is on J (100GB) and most of the programs for it run from partition D (over 120GB) and the XP boot loader resides
    on a partition C (2GB) (which is not the Windows8.1 partition which becomes C only when it boots, but this C drive for XP may also be having the Windows 8 boot loader and files for that -using EasyBCD to handle boot menu of W7 type boot loader). 
    So I need a system that can mount these other physical partitions also alongside with my XP partition when it boots up.
    So what are my options for running this XP SP3 setup via Windows 8 as a guest operating system?
    Also will doing this be likely to require reactivation of my existing windows XP (retail) which means I cannot then use it again if I go back to the XP dual boot at times or in case the VM setup does not work?
    Also do I need to change my XP first so that it boots off its own drive rather than the C partition - and how do I set this up then using EasyBCD or windows boot repair?

    HI I found I had to make physical disk offline to use in Hyper-V which I cannot do and do not want to do with all partitions - cannot choose just ones want.
    So now am trying to make VM of my physical XP -and other partitions neeeded but D partition is over 127Gb so cannot use Disk2VHD. 
    Here is what am trying now - any other suggestions for alternate software to vmware convertor/disk2VHD maybe to do partitions over 127GB?  I have posted also at VMware forums but no answer as yet.
    Advice on doing a physical XPSP3 conversion to a VM for Virtual box and hyper-v ultimately
    Hi I need advice as to best way to convert an existing XP Sp3 install on a physical hard drive along with other related partitions to a Virtual box VM image with aim to convert that VM image to a Hyper-V VM for use with Windows 8.1 host.
     I have several C (boot ini partition), D programs, E Data, etc partitions and a current dual boot with an extra XP install I use as a backup system.
    My main XP is on J drive and other XP on I drive with C drive boot ini that switches btw 2 with J set as default.
     I have a D partition that is over 127 Gb so cannot use Disk2VHD which would have been easier, and it seems there is not a way to make a direct Hyper-V VM from converter but only Vmware VM?
     I do not have or want to purchase as yet VMware Workstation as have W8.1 Pro that can use Hyper-V to run my XP SP3.
     I seem to also have an issue with COM+ corrupted on my machine XP J drive ( It tried to reinstall the COM+ but my es.dll file won't register and I did get a failed conversion with converter when tried earlier at 94% saying VSS snapshots have
    reached their limit).  I think this is related to my COM+ issue which I am not sure now how to fix apart from repair install of my Xp (as I have tried repairing COM with various articles searched on google to no avail) which I may do first before
    retry conversion.  However my ALT XP on I drive seems to be fine with being able to browse the COM+ applications ok.  SO maybe I  can use that instead but it is the J drive XP I want the most (not sure if will work at reboot if I do not
    hot clone it?)
     I have read also the manual for converter 5.5.1 ver standalone and am not sure of a few things so if someone can guide me it would be very much appreciated.
     First of all which version VM should I make image of  if I later want to convert it to a Hyper-V VM image (I only have free Virtual Box latest ver, VMware Player and Hyper-V on Windows 8.1 PRo) ie: VMware workstation 10 or Vmware Player 6 or lower
    ver or other?  OR is there another software I should install for the conversion or later conversion to Hyper-V?  I prefer to use Hyper-V over Virtual Box and Vmware Player if possible, but should these others work just as well for my Xp Sp3 existing
    system as a VM in Windows 8.1?  Please advise which you think is best of these?
    Should I leave all configuration options off while converting and even XP licence, workgroup etc or is it most likely that I will have to reactivate my XP (retail ver) once I reboot in the VM although I am putting to run on Windows 8.1 host on exact same
    hardware as my current XP in dual boot (replacing my physical copies which I don't intend to use after conversion)?  Can I enter licence etc later as well?
     I currently have 8 GB ram total -should I leave Xp one at max it suggests of around 3Gb ram?
    I have Quad core processor -but should I make Xp Vm one dual core for when it runs on W8.1 host to allow the host some processors so can run at same time or leaving my Xp at quad core will be ok?
     Network - I want to use host one as I read it is safer for obsolete XP so do I set that at start or is it better to change this later too -allowing xp to have own internet access (maybe as may need to reactivate also - don't want to call Microsoft
    if can avoid it)?
    If I just want to convert resulting VM to Hyper-V VM -which software to use after for this that is freeware (Virtual Box or VMware Player or Hyper-V -not sure which can do it) and do I not then install Vmware tools?
    SYSPprep should I do anyway regardless of what target VM will be when configuring later, even if on same hardware machine? OR can I just boot Vm and see if boots ok first?
    Anything else I should set specifically for this future use of the VM image in hyper-v?
    AU

  • How can I partition my external hard drive supporting mac OS in one partition and windows OS in another?

    Hello everyone, how can I partition my external hard drive supporting mac OS in one partition and windows OS in another?

    OK. Start with:
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two (2). Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Click on the Erase tab in DU's main window. Select one of the two partitions, preferably the first one, change the Format type: to MSDOS then click on the Erase button.

  • OS 8.1 - Trying to partition an external scsi drive and backup data.

    Have an Apple PowerMac 6000 series minitower at work. It runs a program called 4D, that is a database we use to catalog images. Since I've been with the company, there has been no backup of the database, as an external scsi drive had died and never been replaced.
    Since the system is running OS 8.1, I wasn't sure how I could do any sort of network backup, and in the end I managed to get a new 50-pin scsi 50GB LaCie External Hard drive with the 25-pin cable to connect to the PowerMac. Connected it yesterday, and it did appear on the desktop as you'd expect.
    But when I went to point 4D to the drive, it didn't seem to recognize the file system. I tried erasing the drive, but it had the same probem. Norton Utilities is on the mac, so I tried replacing the partition. Specifically, I tried creating two partitions. One that's 40GB, that I could do 4D backups to. The other, the remaining space (about 7GB) so I could try to copy the entire drive to that partition and maybe even boot from it if the other drive failed.
    However, the drive was still mounted when I tried to repartition and it ended up causing an error. I tried rebooting, and the drive wasn't showing on the desktop, but it still wouldn't repartition. Not knowing was else to do, I low level formatted the drive, told it to write zeros to it, and then create the two partitions. Given I was doing all this on a Saturday and didn't know how long it would take, I left it running in the background to check on Monday.
    Anyone have any experience with OS 8.1? Is there a program like Carbon Copy Cloner that works with that OS? And any thoughts on what I'd need to do to get this drive working as indicated above? I started using Apple again with OS X, and it's quite a bit different than 9 and previous. Could sure use some help.

    Hi, merkman2001 -
    I would use the Apple utility Drive Setup (which comes with a normal OS 8.1 install) to initialize and partition the drive, rather than Norton or any other third-party utility.
    As far as the format type goes, select Mac OS Extended when asked.
    <hr>
    Is there a program like Carbon Copy Cloner that works with that OS?
    Generally such is not needed with OS 9 and earlier OS versions. All pre-OSX OS's and software can be copied using a Finder (drag and drop) copy process, and remain usable.
    This means that the System Folder on the internal drive can be dragged to the icon of the external drive and dropped into it. Ditto any/all additional folders, those containing the programs and documents.
    You should be able to successfully do a test boot using the freshly-copied OS on the external drive; this is the best way to verify the integrity of the copied OS.
    Can't recall if aliases were used in OS 8.1. If they were, it may be necessary to 'fix' any of them used, since the pathname contained in an alias is not corrected when it is copied to another drive - it continues to point to the original original.
    You can also copy the entire source drive to the external one in one action - drag the iccon of the internal drive to that of the external one and drop it in.
    After Finder gets done copying everything (this may take some time, so disable any sleep mode or screensaver), there will be a new folder on the external volume - this folder will be named the same as the internal drive. Inside that folder will be a copy of everything that was on the internal drive, including everything left lying around on the desktop and anything left unemptied in the Trash (these will be placed in new folders named "Desktop" and "Trash" respectively).
    In order to make that external volume bootable using the freshly copied OS, move the System Folder out of the folder it was copied into, so that it is at the root level of the drive, meaning visible in the window that appears when you first open the drive's icon.

  • Partitioning - best way 500gb drive, 3 Linux OS's and a data partition

    Hi All
    This morning I killed my laptop. No, it wasn't Windows that annoyed me, I was watching the Rugby and wasn't really concentrating. It was 7am kick off though. Anyway, I have decided to completely rebuild the system, and as an interim measure have installed Ubuntu (cos it is simple and quick to install - btw Oneiric is actually not bad at all).
    Now, to the question. I have a 500gb hard drive on my laptop. I ideally would like:
    1) Essential - data partition of about 80Gb or so. I want this so that I can point Dropbox, Videos, etc. at this.
    2) Essential - Arch as the main system.
    3) Not really essential - Ubuntu - I do like Ubuntu, and besides i find it convenient to use one Dropbox account on Arch and one on Ubuntu. Ideally I would like to be able to use both on Arch but...
    4) Would like - CentOS or Scientific Linux. Essentially a RHEL lookalike. It's not really necessary but it would look better on my cv or whatever. Problem here being that CentOS et al use LVM.
    No Windows to complicate things.
    What I guess I'm really asking is what order to create the partitions and a suggested layout. I figure on giving a big chunk to the data partition, and then pointing all of the other systems at Documents, Video, Music etc. on the data partition. Whatever OS's I install I just want them to work along with each other, and essentially home (apart from settings) will be on the data partition, i.e. Videos, Music etc.
    Any suggestions welcome, particularly in terms of what to install first, second etc. Should the data partition be at the start or end of the drive? One swap partition? By the way my laptop has 3Gb ram.
    Thanks
    Rich
    Last edited by RichAustin (2011-09-18 16:39:24)

    DJQuiteFriendly wrote:The most convenient option (in my opinion) would be mounting your data partition to /home. This way, you could carry your configuration files for apps across distros, if you so choose. Your swap partition would probably only be useful to you if you want to hibernate because you have 3 gigs of ram already. I have 4 gigs on my laptop and I only went above 1 or 2 when I had tons of apps open at the same time. I haven't checked, but I imagine it's less for Arch. If you want to be able to hibernate, it has to at least be the size of your ram. Your root partitions for the distros should be 15-20gb each.
    Good point about Swap. I wouldn't mount the data partition as /home because of the possibility of different OS's screwing up the settings. However, I do point the .thunderbird folder at the data partition though because it makes it one heck of a lot easier to keep contacts etc. synchronised across distro's. Not sure this approach would work with everything though. Why on earth haven't Mozilla written a decent method of synching Thunderbird?
    tooke wrote:
    As for a layout, here's what I would do:
    /dev/sda1 - extended partition to hold everything else
    /dev/sda5 - data partition
    /dev/sda6 - arch, 15 GB
    /dev/sda7 - ubuntu, 15 GB
    /dev/sda8 - centOS/scientific/whatever, 15 GB
    /dev/sda9 - swap, 4 GB
    I had a similar layout in mind to this. Thanks for the suggestions.
    Rich

  • How do I remove disk partition and merge the 2 partitions into main hard disk C drive. Win7

    How do I remove a disk  partition  and merge the 2 partitions into main hard disk C drive. If I delete Drive  D I am left with 250G of unallocated space in drive D Hard drive. And I want the unallocated portion 250G to be allocated
    to the C drive.jc

    I know it is a little bit late to reply. But, I still want to share my experiences with everyone here.
    Actually, I have ever also has the same issue and needed to resize my C drive partition for much more partition space. But, the resizing process just unexpectedly fails at last in Disk Management. The “extend” function is unable to work.
    So, I have no choice but to take chances with some third party partition resizing tools:
    GParted
    http://gparted.sourceforge.net/
    IM-Magic Partition Resizer Free
    http://www.resize-c.com/
    Both of them seem efficient. So, I just have tried them one by one and finally added wanted free space to my C drive successfully.
    I even have found a video tutorial that teaches me how to resize my drive with this freeware in details:
    https://www.youtube.com/watch?v=6jCeT7CbsKk

Maybe you are looking for