VI analyzer and dialog-style control.

When using VI analyzer it comes up with an occurance that states "The control labeled "whatever" is not a dialog-style control. Because of this, its appearance will not be platform-specific." What is the significance of this message and the pros and cons of not using controls from the system pallette.
Using LV 8.2 and TS 3.5
Using LabVIEW 2010SP1 and TestStand 4.5

Use the controls from the System palette when you want your UI to look like standard dialog UIs in your operating system. For analyzing any other kinds of VIs (test VIs, subVIs, instrument panel VIs, palette VIs, etc.), you should deselect this VI Analyzer test to reduce the amount of "noise" in your results.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Similar Messages

Need picture style control for photo and video wit...

Lumia 1020 stands for its excellent phone camera. But I am very disappointed with its JPG output. The whitle balance is always a big problem, then too much contrast and oversaturation. True, the photo is crystal sharp, but who needs a bad color photo with great sharpness?
After Lumia Black, the DNG format comes. Now I cannot shoot without it. So I just find the 1020 is really great, but the built-in processing destorys all.
I don't know about other phone camera, but just look at the iphone's. Thanks to its great overall JPG output quality, keep much more details, so people love to use post-fx apps in their phone to make good-looking photos. Then 1020 for me, I just have to live with the DNGs instead of easy sharing.
808 Pureview has all the picture style control funtion, even in video !! Down the contrast sharpness and saturation, then the semi-CineStyle is coming! Look at the 1020's video sample, it is a shame.
All I want to say is: Can you (I don't know to call Nokia or Microsoft) make some control opitions like 808 or just low down the over contrast/saturation/sharpness photo and video. I don't wanna see a such amazing sensor and lens camera like this terrible.

In very general terms, the requirements for Video will exceed those for Photoshop (PS). If you are looking at PrPro CS5, then the video card WILL make a difference, and PS CS5 now takes advantage of the video card, than before.
For PS, the minimum HDD setup would be a 2x system with physical (not partitions) HDD's. Video has more requirements in this area, and I would say that a 3x setup is the minimum. Do read Harm's linked article, as it is the best that I have ever run across.
For the PS setup, just locate the Scratch Disks for PS on your extra HDD's, the ones with your Project and PrPro Scratch Disks.
Enjoy the new computer, and welcome to the forum,
Hunt

Provider in Dialog and Travel Expenses Control

Hi,
My Requirement: I want to have free form manual input to specify the name of the provider or merchant or supplier or vendor as there are expense types whose list cannot be maintained. For eg. If there is a business dinner, I want to type the name of the restaurant where dinner took place.
This is because the Travel and Expense department can successfully audit not only the amount but where you spend that amount.
Can you tell me which field to enable in Dialog and Travel Expense Control? From my research, I think "Description" field in SAP could be used for that function. But I am really unsure about that field and what tables are affected by it.
Thanks,
AD

HI,
You can use description or you can use additional information field for entering the details.
Hope this helps.
Regards,
S.Srikanth

How to create smart device application and dialog control using Visual C++ (Visual Studio 2005)

Hai all,
Good day. I am new to Visual C++. I tried and done some simple programs and dialog based programs in MFC application using Visual C++. But when i am trying to do
VC++ smart device win32 smart device project application project, not getting how to add event handler function for button. I tried serial communication in smart device application. i have inserted dialog and in that
no event handler. Can you please guide me to make a project for embedded board in VC++ smart device application.
Thanks & Regards Sasi ................. Go Green

Hi kvg,
Thanks for posting in MSDN forum.
From your post, it seem that this issue is better ask to the
Visual Studio Smart Device Development - Native C++ Project forum. I will move your thread to that forum for a better support. Thanks for your understanding.
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Microsoft Date and Time Picker Control 6.0 (SP6) errors

One of our functioning VBA projects in Outlook 2010, running under Windows 7 Professional (64-bit), unexpectedly stopped functioning a few months ago. When running the VBA macro we started receiving the compile error message:
"Object library invalid or contains references to object definitions that could not be found"
PROBLEM FORM CONTROL: The message was extremely frustrating because it gave no detailed indication of the source of the problem. With a little research, however, we found that the
Microsoft Date and Time Picker Control 6.0 (SP6), on a userform accessed by the macro, was generating the error. A number of older articles, such as the one included below, indicated that we needed
to re-register the MSCOMCT2.OCX form control, which we did successfully (as did the original author in his question link below). Unfortunately, as the original author found, simply re-registering the form control did not resolve the problem.
UNRESOLVED QUESTIONS:
1. Does anyone know why this functioning control would unexpectedly cease to function?
2. Can anyone help us restore the functionality of the 'Microsoft Date and Time Picker Control 6.0 (SP6)'?
3. How come the form control is listed in the object library, is available in the 'Additional Controls' dialog, and can be inserted into a form, without any indication that it is broken?
SUPPORT ENGINEER RUN-AROUND: Another frustration is that a responding support engineer, in the prior article, keeps referring the author back to this forum, yet the question is apparently never answered back here in
the TechNet forum (which ironically refers us back to the original article in the other forum - a game of musical chairs!).
We suspect that the solution to this problem may be similar to resolving this issue for other similar form controls in other Office 2010 application, not just Outlook. After several years, and a myriad questions on the internet regarding
this exact subject, is there someone who can definitively resolve this issue with this control?
Thank you for any help.
LINK TO THE ORIGINAL UNANSWERED QUESTION (i.e., regarding the MSCOMCT2.OCX control and reference back to this forum):
http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/ms-date-and-time-picker-contol-60-sp-6-w-excel/9b0cc596-5e13-48bc-b03e-13dbfd1c7f9d

Hi,
Would you like to tell me your Excel version number (Go to Account>About Excel). I tested in my version :15.0.4569.1504 and the Date and Time Picker Control 6.0 still could be used.
Then,>> My PC is 64 bit. I believe my version of Office is also 64 bit.<< Office 2013 32 bit also could be installed in 64bit operation system. We could check it with Account>About Excel.
Next, as you said >>After I exited 'Design Mode,' it started working again. I tested it, along with my 'Clear Form' button multiple times. It seemed to be working fine. I closed the document and reopened it. Enabled Macros.
When I tried to use it after reopen, it doesn't work again.<<
I recommend we recreate a new blank Excel file and insert the Date and Time Picker Control 6.0 to test.
If it still does not work well, please try to reinstall and re-registry it. Follow the link:
https://social.msdn.microsoft.com/Forums/office/en-US/36f83f24-cd76-4f8e-aa7b-5f166666e7d3/excel-2013-popup-calendar
https://social.msdn.microsoft.com/Forums/en-US/91cf3127-70fe-4726-8a27-31b8964430c5/registering-mscomct2ocx-in-64-bit-windows-7?forum=sbappdev
If it works well, I suppose this issue is related to macros. I recommend you post the question to MSDN forum to debug them:
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=exceldev
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

What is difference between report programming and dialog programming?

hi,
what is difference between report programming and dialog programming? plz provide some example code
bye

ABAP programming
Basically reports are used to read database and represent the results in lists.
Reports are collections of processing blocks that the system calls depending on events.
We can use reports to evaluate data from database tables.
Reports are stand alone programs and controlled by events.
A report itself never creates events
steps in report:
Processing the selection screen
Reading the database
Evaluating the data and creating lists
Outputting a list.
1st u write simple logics, after that u can enhance the code as step by step.
http://venus.imp.mx/hilario/Libros/TeachYrslfAbap4/index.htm
http://help.sap.com/saphelp_47x200/helpdata/en/d1/802cfc454211d189710000e8322d00/frameset.htm
http://www.sapdev.co.uk/reporting/reportinghome.htm
Dialog Programming
Structure of a Dialog Program
A dialog program consists of the following basic components:
Screens (dynpros)
Each dialog in an SAP system is controlled by dynpros. A dynpro (DYnamic PROgram) consists of a screen and its flow logic and controls exactly one dialog step. The flow logic determines which processing takes place before displaying the screen (PBO-Process Before Output) and after receiving the entries the user made on the screen (PAI-Process After Input).
The screen layout fixed in the Screen Painter determines the positions of input/output fields, text fields, and graphical elements such as radio buttons and checkboxes. In addition, the Menu Painter allows to store menus, icons, pushbuttons, and function keys in one or more GUI statuses. Dynpros and GUI statuses refer to the ABAP/4 program that control the sequence of the dynpros and GUI statuses at runtime.
ABAP/4 module pool
Each dynpro refers to exactly one ABAP/4 dialog program. Such a dialog program is also called a module pool, since it consists of interactive modules. The flow logic of a dynpro contains calls of modules from the corresponding module pool. Interactive modules called at the PBO event are used to prepare the screen template in accordance to the context, for example by setting field contents or by suppressing fields from the display that are not needed. Interactive modules called at the PAI event are used to check the user input and to trigger appropriate dialog steps, such as the update task.
All dynpros to be called from within one transaction refer to a common module pool. The dynpros of a module pool are numbered. By default, the system stores for each dynpro the dynpro to be displayed next. This dynpro sequence or chain can be linear as well as cyclic. From within a dynpro chain, you can even call another dynpro chain and, after processing it, return to the original chain.
Check this link for basics.
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
Check this link for Dialog Programming/Table Control
http://www.planetsap.com/Tips_and_Tricks.htm#dialog
Check this SAP Help for Dialog Program doc.
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
Check this SAP Help link for Subscreens.
http://help.sap.com/saphelp_nw70/helpdata/en/9f/dbabfe35c111d1829f0000e829fbfe/content.htm
Check this link for subscreen demo program.
http://abapcode.blogspot.com/2007/05/demo-program-to-create-subscreen-in.html
Also check this link too.
http://abapcode.blogspot.com/2007/06/dialog-programming-faq.html
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/frameset.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld004.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670ba2439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670c17439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670c17439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9ccf35c111d1829f0000e829fbfe/frameset.htm
http://abapprogramming.blogspot.com/

How do you have the bottom stroke of a table show up using Table Styles and Cell Styles only?

I am using InDesign CS6, and I want to create a Table Style that has the bottom stroke show up, but does not have a table border, such as:
However, whenever I try to change the Table or Cell strokes so that the last stroke shows up, I get the entire table border, or some strange combination of borders:
Does anyone have any insight on how I can get the bottom stroke to show up while preserving my other stroke properties? Since I work with long documents, it's necessary to be able to control all of my tables through Table Styles and Cell Styles, and not by manually changing each and every table with the Stroke palette.
For reference, here are the my current Table Style properties and the resulting table:

Michael Murphy is the InDesign style-meister. He wrote "Adobe InDesign Styles" for Adobe Press, and did a great Lynda.com title on InDesign styling. Here's what he says in the book:
"As mentioned at the beginning of this chapter, with all the power of table and cell styles, it is important to understand not only how they work and what they can do for you, but also to understand their limitations.
"Two formatting features missing in table and cell styles have already been discussed: You will always have to set the column width and row height of cells when applying a table style for the first time, and you will always have to convert body rows to header and/or footer rows every time you apply a table style for first time or update the table's data....
"But there's another kind of limitation that's important to keep in mind as you are designing tables: It is very easy to design a table that cannot be completely defined by a table style. In many cases, you'll need to define an extra cell style or two that lets you complete for formatting. [my emphasis]."
So I think that's what you have to do: Apply another cell style on top of the cells at the bottom of the table after applying the table style.

Microsoft Date and Time Picker Control 6.0 - Need help!

I am working on a form in Office 365 Excel 2013 that uses the Microsoft Date and Time Picker Control 6.0. When I set the form up last week, this Active X control was working perfectly. The weekend goes by...and now it's not working at all?
My PC is 64 bit. I believe my version of Office is also 64 bit. When I researched this issue online, I found lots of people who indicated that this control was missing in their development kit. It was and has always been available in mine
(i.e. I didn't have to load an MSCOMCT2 file). Further, this control WAS WORKING when I created it last week. Now it is not, even though no changes have been made to it. I can place the control on the sheet and even set properties for it.
But once I click out of Design Mode, it is not functioning. It doesn't open or respond to any clicks on it.
Can anyone help me identify a reason why it may have suddenly stopped working? I don't think it is macro-related because I have a 'Clear Form' button on the same page and it works just fine.
UPDATE: I've noticed something else peculiar but relevant. My office 365 just did some updates. When updates were completed, it auto-reopened my file. I noticed that the Date/Time Picker button looked funny (really pixelated).
So I hit 'Design Mode' and resized it. After I exited 'Design Mode,' it started working again. I tested it, along with my 'Clear Form' button multiple times. It seemed to be working fine. I closed the document and reopened it.
Enabled Macros. When I tried to use it after reopen, it doesn't work again. Won't respond to ANY attempts to click on it. I can click on 'Design Mode' and it sees the control, edits properties, etc. But when you click out of 'Design Mode,'
it's a dead button again. I also went to someone else's desk to test this form. Same problem. Date/Time picker button doesn't work, even after enabling macros. The Clear Form Button has no problems though.
Thanks!

Hi,
Would you like to tell me your Excel version number (Go to Account>About Excel). I tested in my version :15.0.4569.1504 and the Date and Time Picker Control 6.0 still could be used.
Then,>> My PC is 64 bit. I believe my version of Office is also 64 bit.<< Office 2013 32 bit also could be installed in 64bit operation system. We could check it with Account>About Excel.
Next, as you said >>After I exited 'Design Mode,' it started working again. I tested it, along with my 'Clear Form' button multiple times. It seemed to be working fine. I closed the document and reopened it. Enabled Macros.
When I tried to use it after reopen, it doesn't work again.<<
I recommend we recreate a new blank Excel file and insert the Date and Time Picker Control 6.0 to test.
If it still does not work well, please try to reinstall and re-registry it. Follow the link:
https://social.msdn.microsoft.com/Forums/office/en-US/36f83f24-cd76-4f8e-aa7b-5f166666e7d3/excel-2013-popup-calendar
https://social.msdn.microsoft.com/Forums/en-US/91cf3127-70fe-4726-8a27-31b8964430c5/registering-mscomct2ocx-in-64-bit-windows-7?forum=sbappdev
If it works well, I suppose this issue is related to macros. I recommend you post the question to MSDN forum to debug them:
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=exceldev
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Problem with paragraph and character style

Recently I have noticed that when I alter a paragraph or character style that the text won't change to the changes I performed.
It doesn't matter whether it's just the preview mode or when I clicked "OK"- no changes will be performed whether it be typeface or size.
Does anyone know what can be wrong?

My bet is that you haven't got a clear understanding of the difference between character styles and paragraph styles, and that you are using the former incorrectly.
Paragraph styles include basic font formatting information that is applied to all text in a paragraph UNLESS that text also has either a character style or a local format override (select the text and change something) applied. The formatting heirarchy works with paragraph style at the bottom, character styles trump formatting applied in the paragraph style, and local formatting trums everything else.
Select the text in question. Look in the the Paragraph Style field in the Control panel, or open the Paragraph Styles panel to see what is applied. If there is a plus sign next to the name local formatting overrides have been applied (hold the Alt or Opt key and click the style name to remove them), but character styles are not considered overrides, so if there is no plus sign, check the Character Style field in the control panel or ope the Character Styles panel to check if any character styles are also applied.

ANNOUNCE: JRockit R27.1 and JRockit Mission Control 2.0 released!

New versions of JRockit and JRockit Mission Control are now available!
The following new products have been released:
- JRockit 1.4.2 R27.1
- JRockit 5.0 R27.1
- JRockit 6 R27.1 TECHNOLOGY PREVIEW
- JRockit Mission Control 2.0
JROCKIT R27.1
=============
The JRockit release is a major update from the previous version (R26.4) and includes a large set of enhancements including:
- A completely new version of JRockit Mission Control (see separate section below)
- Improved Monitoring and Diagnostics features
- Improved Supportability features
- Connect-on-Demand capability for JVMTI and JMX (JRockit 5.0 and 6)
- A new "Diagnostics Guide" with troubleshooting and performance tuning tips
- Full support for IPv6 on all platforms
- Expanded support for Solaris/SPARC
- Enhanced performance
The 1.4.2 and 5.0 versions of JRockit R27.1 are based on Sun 1.4.2_12 and 1.5.0_08 respectively, and contain all enhancements and fixes made to the Java class libraries from those Sun releases.
JRockit 6 R27.1 is a tech preview based on 1.6.0-rc-b97 from Sun. The public GA of JRockit 6 is expected to be in the first half of 2007, and will bring a larger set of performance enhancements. For feedback on this release, please use our user forums at forums.bea.com/bea/forum.jspa?forumID=2009.
The connect-on-demand capabilities in JRockit 5.0 and 6 are similar to those provided in Sun Java SE 6 and enable developers to connect to locally running JRockit processes without being forced to start JRockit with specific command line options. For JMX there is also an autodiscovery mechanism for remote connections which is very useful in development environments.
For Solaris/SPARC we have added a JRockit 1.4.2 version, which in internal measurements has shown to be very competetive to Sun's 1.4.2 implementation on Solaris/SPARC. Definitely worth checking out! (Note: WLS 8.1 does not officially support running on this JRockit version.)
On the performance side, there are enhancements for WLS applications (10-15%), memory-intensive applications (10-15%) and improved out-of-the-box performance (up to 25%), all based on internal measurements.
Release notes:
http://e-docs.bea.com/jrockit/releases/R27/relnotes/r27_notes.html
Docs home:
http://e-docs.bea.com/jrockit/webdocs/index.html
NEW! Diagnostics Guide:
http://e-docs.bea.com/jrockit/geninfo/diagnos/index.html
Download pages:
http://commerce.bea.com/products/weblogicjrockit/jrockit_prod_fam.jsp
JROCKIT MISSION CONTROL 2.0
===========================
Together with JRockit R27.1 we are releasing a completely new version of JRockit Mission Control. The separate tools in JMC 1.0 have been integrated into one single GUI based on Eclipse RCP, which means that any user of the Eclipse IDE should feel at home. All tools features from Mission Control 1.0 are of course still available, and we continue our drive towards exposing all data about your Java application that JRockit has access to. You will also find a large set of usability improvements, including:
- Drag-and-drop support
- Configurable views
- Online and (for the Runtime Analyzer) context-sensitive help
- Connect-on-demand to local JVMs and autodiscover remote JVMs
One particular area of interest is GC profiling, where much more detailed metrics are available, which can help drill down into the causes for long GC pause times and spikes.
Release notes:
http://edocs.bea.com/jrockit/tools/relnotestools/relnotestools2.html
There is no separate download for JRockit Mission Control, instead it is included in the JRockit R27.1 JDK downloads for Windows and Linux/x86. To start using the tools, install JRockit and select JRockit Mission Control from the Windows Start menu, or launch the $JROCKIT_HOME/bin/jrmc executable.
Documentation is bundled with the installation and available from the Help menu.
If you have any questions, comments or concerns, please visit our user forums at forums.bea.com/bea/forum.jspa?forumID=2009.
Happy holidays!
Henrik Stahl
Product Manager

Hi,
I have tried and installed the version R27.1.0-109-73164-1.5.0_08-20061129-1415-linux-x86_64 on our 16GB RAM
with 4 dual-core Opteron processor.
JAVA_OPTS="-server -Xms800M -Xmx4000M -Djava.net.preferIPv4Stack=true -Xpausetarget=2500ms -Xverboselog:/var/log/javavm.log -Xverbose:gc,memory -Xverbosetimestamp -Xgcpause -Xgcreport -Xstrictfp -XXexitOnOutOfMemory -XXdumpFullState -XXstaticCompaction -XXcompactRatio:10 "
After 5 secs of jvm startup I receive the follwing trace (without any DUMP-file):
java.lang.OutOfMemoryError: class allocation JVM@check_alloc (src/jvm/model/classload/classalloc.c:1
22). 42216 bytes requested. Java heapsize=838860800, paged memory=0/0.
Probable cause: Too large java heap setting.
Try to reduce the Java heap size using -Xmx:<size> (e.g. "-Xmx128m")
at java/lang/Class.getDeclaredMethods0(Z)[Ljava/lang/reflect/Method;(Native Method)
    at java/lang/Class.privateGetDeclaredMethods(Class.java:2395)
    at java/lang/Class.getMethod0(Class.java:2642)
    at java/lang/Class.getMethod(Class.java:1579)
    at org/apache/xalan/processor/XSLTAttributeDef.setAttrValue(XSLTAttributeDef.java:1611)
    at org/apache/xalan/processor/XSLTElementProcessor.setPropertiesFromAttributes(XSLTElementProces
sor.java:338)
    at org/apache/xalan/processor/XSLTElementProcessor.setPropertiesFromAttributes(XSLTElementProces
sor.java:263)
    at org/apache/xalan/processor/ProcessorTemplateElem.startElement(ProcessorTemplateElem.java:76)
    at org/apache/xalan/processor/StylesheetHandler.startElement(StylesheetHandler.java:623)
    at org/apache/xerces/parsers/AbstractSAXParser.startElement(Lorg/apache/xerces/xni/QName;Lorg/ap
ache/xerces/xni/XMLAttributes;Lorg/apache/xerces/xni/Augmentations;)V(Unknown Source)
    at org/apache/xerces/impl/XMLNSDocumentScannerImpl.scanStartElement()Z(Unknown Source)
    at org/apache/xerces/impl/XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Z)Z(
Unknown Source)
    at org/apache/xerces/impl/XMLDocumentFragmentScannerImpl.scanDocument(Z)Z(Unknown Source)
    at org/apache/xerces/parsers/XML11Configuration.parse(Z)Z(Unknown Source)
    at org/apache/xerces/parsers/XML11Configuration.parse(Lorg/apache/xerces/xni/parser/XMLInputSour
ce;)V(Unknown Source)
    at org/apache/xerces/parsers/XMLParser.parse(Lorg/apache/xerces/xni/parser/XMLInputSource;)V(Unk
nown Source)
    at org/apache/xerces/parsers/AbstractSAXParser.parse(Lorg/xml/sax/InputSource;)V(Unknown Source)
    at org/apache/xerces/jaxp/SAXParserImpl$JAXPSAXParser.parse(Lorg/xml/sax/InputSource;)V(Unknown
Source)
    at org/apache/xalan/processor/TransformerFactoryImpl.newTemplates(TransformerFactoryImpl.java:92
0)
    at org/jboss/deployment/XSLSubDeployer.createService(XSLSubDeployer.java:141)
    at org/jboss/system/ServiceMBeanSupport.jbossInternalCreate(ServiceMBeanSupport.java:260)
    at org/jboss/system/ServiceMBeanSupport.jbossInternalLifecycle(ServiceMBeanSupport.java:243)
    at sun/reflect/GeneratedMethodAccessor2.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/
Object;(Unknown Source)
    at sun/reflect/DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java/lang/reflect/Method.invoke(Method.java:585)
    at org/jboss/mx/interceptor/ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
    at org/jboss/mx/server/Invocation.dispatch(Invocation.java:94)
    at org/jboss/mx/server/Invocation.invoke(Invocation.java:86)
    at org/jboss/mx/server/AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
    at org/jboss/mx/server/MBeanServerImpl.invoke(MBeanServerImpl.java:659)
    at org/jboss/system/ServiceController$ServiceProxy.invoke(ServiceController.java:978)
    at $Proxy0.create()V(Unknown Source)
    at org/jboss/system/ServiceController.create(ServiceController.java:330)
    at org/jboss/system/ServiceController.create(ServiceController.java:273)
    at sun/reflect/GeneratedMethodAccessor4.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/
Object;(Unknown Source)
    at sun/reflect/DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java/lang/reflect/Method.invoke(Method.java:585)
    at org/jboss/mx/interceptor/ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
    at org/jboss/mx/server/Invocation.dispatch(Invocation.java:94)
    at org/jboss/mx/server/Invocation.invoke(Invocation.java:86)
    at org/jboss/mx/server/AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
    at org/jboss/mx/server/MBeanServerImpl.invoke(MBeanServerImpl.java:659)
    at org/jboss/mx/util/MBeanProxyExt.invoke(MBeanProxyExt.java:210)
    at $Proxy4.create(Ljavax/management/ObjectName;)V(Unknown Source)
    at org/jboss/deployment/SARDeployer.create(SARDeployer.java:258)
    at org/jboss/deployment/MainDeployer.create(MainDeployer.java:953)
    at org/jboss/deployment/MainDeployer.deploy(MainDeployer.java:807)
    at org/jboss/deployment/MainDeployer.deploy(MainDeployer.java:771)
    at jrockit/vm/RNI.c2java(JJJJ)V(Native Method)
    at jrockit/vm/Reflect.invokeMethod(Ljava/lang/Object;Ljava/lang/Object;[Ljava/lang/Object;)Ljava
/lang/Object;(Native Method)
    at sun/reflect/NativeMethodAccessorImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object;[Lja
va/lang/Object;)Ljava/lang/Object;(Native Method)
    at sun/reflect/NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun/reflect/DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java/lang/reflect/Method.invoke(Method.java:585)
    at org/jboss/mx/interceptor/ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
    at org/jboss/mx/server/Invocation.dispatch(Invocation.java:94)
    at org/jboss/mx/interceptor/AbstractInterceptor.invoke(AbstractInterceptor.java:133)
    at org/jboss/mx/server/Invocation.invoke(Invocation.java:88)
    at org/jboss/mx/interceptor/ModelMBeanOperationInterceptor.invoke(ModelMBeanOperationInterceptor
.java:142)
    at org/jboss/mx/server/Invocation.invoke(Invocation.java:88)
    at org/jboss/mx/server/AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
    at org/jboss/mx/server/MBeanServerImpl.invoke(MBeanServerImpl.java:659)
    at org/jboss/mx/util/MBeanProxyExt.invoke(MBeanProxyExt.java:210)
    at $Proxy8.deploy(Ljava/net/URL;)V(Unknown Source)
    at org/jboss/deployment/scanner/URLDeploymentScanner.deploy(URLDeploymentScanner.java:421)
    at org/jboss/deployment/scanner/URLDeploymentScanner.scan(URLDeploymentScanner.java:634)
    at org/jboss/deployment/scanner/AbstractDeploymentScanner$ScannerThread.doScan(AbstractDeploymen
tScanner.java:263)
    at org/jboss/deployment/scanner/AbstractDeploymentScanner.startService(AbstractDeploymentScanner
.java:336)
    at org/jboss/system/ServiceMBeanSupport.jbossInternalStart(ServiceMBeanSupport.java:289)
    at org/jboss/system/ServiceMBeanSupport.jbossInternalLifecycle(ServiceMBeanSupport.java:245)
    at sun/reflect/GeneratedMethodAccessor2.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/
Object;(Unknown Source)
    at sun/reflect/DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java/lang/reflect/Method.invoke(Method.java:585)
    at org/jboss/mx/interceptor/ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
    at org/jboss/mx/server/Invocation.dispatch(Invocation.java:94)
    at org/jboss/mx/server/Invocation.invoke(Invocation.java:86)
    at org/jboss/mx/server/AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
    at org/jboss/mx/server/MBeanServerImpl.invoke(MBeanServerImpl.java:659)
    at org/jboss/system/ServiceController$ServiceProxy.invoke(ServiceController.java:978)
    at $Proxy0.start()V(Unknown Source)
    at org/jboss/system/ServiceController.start(ServiceController.java:417)
    at sun/reflect/GeneratedMethodAccessor9.invoke(Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/
Object;(Unknown Source)
    at sun/reflect/DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java/lang/reflect/Method.invoke(Method.java:585)
    at org/jboss/mx/interceptor/ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
    at org/jboss/mx/server/Invocation.dispatch(Invocation.java:94)
    at org/jboss/mx/server/Invocation.invoke(Invocation.java:86)
    at org/jboss/mx/server/AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
    at org/jboss/mx/server/MBeanServerImpl.invoke(MBeanServerImpl.java:659)
    at org/jboss/mx/util/MBeanProxyExt.invoke(MBeanProxyExt.java:210)
    at $Proxy4.start(Ljavax/management/ObjectName;)V(Unknown Source)
    at org/jboss/deployment/SARDeployer.start(SARDeployer.java:302)
    at org/jboss/deployment/MainDeployer.start(MainDeployer.java:1007)
    at org/jboss/deployment/MainDeployer.deploy(MainDeployer.java:808)
    at org/jboss/deployment/MainDeployer.deploy(MainDeployer.java:771)
    at org/jboss/deployment/MainDeployer.deploy(MainDeployer.java:755)
    at jrockit/vm/RNI.c2java(JJJJ)V(Native Method)
    at jrockit/vm/Reflect.invokeMethod(Ljava/lang/Object;Ljava/lang/Object;[Ljava/lang/Object;)Ljava
/lang/Object;(Native Method)
    at sun/reflect/NativeMethodAccessorImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object;[Lja
va/lang/Object;)Ljava/lang/Object;(Native Method)
    at sun/reflect/NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun/reflect/DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java/lang/reflect/Method.invoke(Method.java:585)
    at org/jboss/mx/interceptor/ReflectedDispatcher.invoke(ReflectedDispatcher.java:155)
    at org/jboss/mx/server/Invocation.dispatch(Invocation.java:94)
    at org/jboss/mx/interceptor/AbstractInterceptor.invoke(AbstractInterceptor.java:133)
    at org/jboss/mx/server/Invocation.invoke(Invocation.java:88)
    at org/jboss/mx/interceptor/ModelMBeanOperationInterceptor.invoke(ModelMBeanOperationInterceptor
.java:142)
    at org/jboss/mx/server/Invocation.invoke(Invocation.java:88)
    at org/jboss/mx/server/AbstractMBeanInvoker.invoke(AbstractMBeanInvoker.java:264)
    at org/jboss/mx/server/MBeanServerImpl.invoke(MBeanServerImpl.java:659)
    at org/jboss/mx/util/MBeanProxyExt.invoke(MBeanProxyExt.java:210)
    at $Proxy5.deploy(Ljava/lang/String;)V(Unknown Source)
    at org/jboss/system/server/ServerImpl.doStart(ServerImpl.java:482)
    at org/jboss/system/server/ServerImpl.start(ServerImpl.java:362)
    at org/jboss/Main.boot(Main.java:200)
    at org/jboss/Main$1.run(Main.java:464)
    at java/lang/Thread.run(Thread.java:595)
    at jrockit/vm/RNI.c2java(JJJJ)V(Native Method)
    -- end of trace
JRockit aborted: Out of memory (68)
Failed to acquire native memory. Try reducing Java heap size using -Xmx:<size> (i.e "-Xmx16m")
If I change the -Xmx parameter from -Xmx4000M to -Xmx3000M
than it didn't work, but
if I change the -Xmx parameter from -Xmx4000M to -Xmx2900M
than it works.
(The hint to change -Xmx to -Xmx16m is great on a 16GB RAM machine,.. :-) )
Any ideas?
How can I use 4GB java-heap ?
Greetings Martin

Set default to Classic style control/indicator

Is it possible to set default to "classic style" control/indicator so that when I create a control/indicator from the block diagram, I will have a classic style control/indicator on the front panel?
Somehow, I still like the classic style control/indicator more. Many times, after I create a control/indicator from the block diagram, I have to replace the new style control/indicator with a classic style control/indicator from the front panel. It can be done, but it would be nice if I can create what I want from the block diagram directly.
Thanks.
Ian Ren

Well, to manually place a classic control, you would just go to the classic palette, no settings needed.
Have you read the detailed help for this option? Maybe it's not exactly what you think it is.
"Control Style for Create Control/Indicator—Changes the style of the control or indicator LabVIEW creates when you right-click a terminal and select Create»Control or Create»Indicator from the shortcut menu."
LabVIEW Champion . Do more with less code and in less time .

Change Background and font style in Web Page Composer ?

Hi,
someone knows how change the background and font style/size of the web page composer ?
or how to control font size style and background of WPC page using CSS ???
point will rwrd

Hi,
We are on EP7 SP14 and WPC SP14 Patch 2.
Changing the css files should work perfectly...
Try changing these files under the KM Content:
KM Content -> root -> etc -> Web Content -> css
These are some of the css files that I have modified :
root > etc > wpceditor > css > runtime > sdn_general.css
root > etc > wpceditor > css > runtime > content.css
root > etc > wpceditor > css > runtime > sdn_apps.css
In particular, change the sdn_general.css and it will be changed.
It works for us....

Bullet and number styles different when viewed

I'm using RoboHelp 6 to produce a WebHelp project.
It seems like the bullet and number styles behave differently
than the other styles. There is an automatic indent, even though
Left is set to 0, and a tab. I have been able to get the View
Selected Item to look the way I want (with a hanging indent that
aligns under the tabbed text) even though it looks very different
in the WYSIWYG Editor.
With the Number style, the font size seems much larger in the
View Selected Item than it does in the WYSIWYG Editor. Is there a
way to know what the font size will be/look like to the Help user?
The number size also seems to be different if I use the Create a
Number List button or use the Number style. What is the difference
between using the style and using the button? Can I control the
number and bullet font and size?
I'm still learning.
Thanks

Bummer!
RH doesn't always remove every piece of code when you, for
instance, select bolded characters and click the Bold toolbar
button; it often adds another SPAN tag for normal inside or outside
the bold tag!
The surest way I know to completely purge content is to
filter it through a plain text editor like Notepad:
1. In the RH topic, select the content (some paragraphs or
the entire topic).
2. Cut it (Ctrl+X).
3. Paste it into Notepad (Ctrl+V).
4. In Notepad, select and cut the content.
5. In the RH topic, paste the purged content where the old
content used to be.
Each paragraph will only get P tags assigned to it, allowing
you then to style your way through them. Of course, this
slash-and-burn method eliminates all hyperlinks, pop-ups, etc., so
plan accordingly.
Good luck,
Leon

Configure Numbered and Bulleted Styles in CSS

I have searched and read a lot of postings re:Numbered and Bulleted styles/lists in the CSS setup and still have no clue how this was changed in the most recent build of RoboHelp HTML or the correct way to apply and get to work.
In X5 of RoboHelp HTML, I had a CSS style sheet with 5 paragraph styles with bullets. I did not create a list - I simply bulleted the style. When I apply one of these styles to a paragraph it adds a bullet.
I upgraded to RoboHelp HTML X8.0.2.208 and my bulleted styles are a total mess. The styles are still in the CSS, but when applied there is no bullet - it adds a number (then I have to click the Bullet icon button on the toolbar to apply a bullet). I have tried to find release notes or some documentation explaining the change and can find none. I have reviewed Peter Grange's site information about lists and multilevel lists, but see no reason why I cannot just apply a bullet directly on a style without using the list or multilevel list.
I guess the issue may be my stupidity on the configuration and use of lists and multilevel lists. Is there any documentation from Adobe that outlines the change that occurred as of this most recent build? I am looking for an explanation of how a list corresponds to a style and how to get the style to work correctly. Ironically, the online help has been no help at all.
As always, thanks to any feedback or direction.
Michael F Weart

OK - sorry have not posted my solution and it works for me...
This is what I did to create a single level bulleted style using bulleted list:
(1) Create a MultiLevel List Style called BulletedList
I have only defined Level 1 of the MultiLevel List
For that Level 1 - I DID NOT specify a Paragraph Style
For that Level 1 - I selected List Style of DISC
For that Level 1 - I defined the Edit Style as <x>
Saved this MultiLevel List style with a name of BulletedList
(2) Created a Paragraph Style called NBullet
Font is set to Arial 10pt
Spacing/After is set to 6pt
From Indents line - clicked the AutoNumber icon button
This opens the List for Autonumbering dialog and I set the following:
Checked the box for Inherit Numbering Property from Multilevel List
Selected BulletedList from the List Class drop down
Selected List Level as "1"
Clicked OK to apply and return to Paragraph Style Setup dialog
On Paragraph Style Setup dialog clicked the Format drop down button
Selected Paragraph formatting
Defined Left Indentation of .5in
Defined Special Indentation of Hanging .25in
(3) Clicked OK to save the Paragraph style called NBullet
When I look at the drop down list of styles within a topic, the style name appears as "1 NBullet". Don't let the "1" fool you - when I apply that style the "disc" bullet is applied and NOT a number (it just displays a number in the style name for some reason that escapes me).
I now have my bulleted style back and it works fine.
NOTE: I do not like to reformat anything, so I set up an NBullet (Spacing After set to 6pt), NBulletSpace (Spacing After set to 12pt) and NBulletLast (Spacing After set to 18pt).
I also set up "bullet continuation" paragraph styles so I can lead with a bulleted line of text and then follow with "additional information" paragraph that aligns to the text in the bulleted lead paragraph line - that paragraph style is NBulletContinue defined with NO autonumber setup and the Format/Paragraph set to Indent/Left .75in (which aligns the text to the text of the bulleted paragraph).
I set up the same paradigm of NBulletContinue, NBulletContinueSpace and NBulletContinueLast.
=============
Aside from the Style name appearing in the Style list when working in a topic as "1 NBullet", "1 NBulletSpace" and "1 NBulletLast" the formatting works and looks great (and note - the style name when I go into CSS formatting does not have the leading "1").
Also note, if I use the Increase Indent option when working in a topic on the NBullet styled paragraph, the Level 2 bullet list format is applied. I HAVE NEVER and WILL NEVER use the Increase or Decrease Indent functionality (either in Word or RoboHTML).
All of my CSS styles match the naming convention used in my Word template - making it easier to push content back and forth between Word and RoboHTML.
=============
My approach may be non-standard and may not be within the spirit of this functionality, but it works for me and I get the formatting I need.
One last note on the comment of the "sluggishness of the product" for x8 - I had the same problem and then I applied the two patches that were made available. The difference in the response time was VERY noticeable in a GOOD way. Search for and apply both fixes to RoboHTML x8 and you will see a pronounced difference. I also got my boss to approve ordering a new PC and now there is not sluggishness at all in the performance.
Thanks to all --
Michael F Weart

Paragraph and Character styles in Fireworks

Hi
i used fireworks for a while, when it was still macromedia product, glade to see all the improvments in CS5.
i used Photoshop to create a very specific prototyping (including all CSS properties) of my website, but when i come to prototype the rest of the pages i totaly lost control, than i realize Photoshop is not the right tool for prototyping a whole website.
fireworks shuld be the answer of my prays, as i could read in the articles, in CS5 you can set all properties for text and fireworks will export it as CSS file, than al you have to do is copy and paste code according to your CSS structure, that grate time saver.
but one thing is really betters me, you cant do really good prototyping if you dont have the ability to create a paragraph and character styles (as you would with InDesign)
can fireworks create styles in the level of Indesign? and if not, what is the right workflow between Fireworks and Indesign?
Thanks
S

Window > Find and Replace will enable you to change all the instances of a text color in the entire document.
You can create your own character styles by saving them in the Styles panel. To do this, click on an instance of a style you want to save, and then on the little down arrow at the top right of the Styles panel to open the New Style menu. Select which characteristics you want to save, then click the OK button to close the panel. To apply your custon style, select the object you want to apply it to, then click on your custom style.

VI analyzer and dialog-style control.

Similar Messages

Maybe you are looking for