VI Analyzer shows non-existant error
I just ran VI Analyzer on a VI and received the following in the results.
"The function "Request Deallocation" has none of its outputs wired, and therefore performs no useful operation. Consider removing this function from your diagram."
The "Request Deallocation" function has no outputs, only a single boolean input, and it is connected.
Another thing I noticed that is not quite correct is the "Wires Under Objects". It triggers a warning if a wire is just touching an object, but not hidden. I had a wire running from a For loop iteration terminal to the 'index' terminal on an array function and the bend in the wire was touching the bottom corner of the 'Loop Count' ternimal, but was not under it.
This is on WinXP, LabVIEW
7.1 andVI Analyzer 1.0
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.
Hi Ed,
In regards to your first problem, that is definitely a bug in the Unused Code test...the "Request Deallocation" function obviously shouldn't fail that test. I will make sure this gets fixed in the next version of the VI Analyzer.
For the second problem, I would argue that both of the examples you give in your screenshots should be flagged by the test. You are correct that the wires are not technically "under" the For Loop N terminals, but I feel that both examples are not good examples of wiring, especially given all the extra space to the right inside the For Loop. The wires are unnecessarily crowded up against the N terminal. Obviously this is a trivial case, but the purpose of the Wires Under Objects test is to improve the readability of diagrams
, and I think we all agree that diagrams are more readable with more whitespace between wires and adjacent objects.
Nevertheless, we do plan to add a pixel tolerance option to the test in the next version of the VI Analyzer, since I know that not everyone agrees with my purist views on wire spacing.
One more thing...I noticed in your post that you are using LabVIEW 7.1 and the VI Analyzer 1.0. There are some issues with using the VI Analyzer 1.0 with LabVIEW 7.1, and these issues are addressed and corrected with the VI Analyzer 1.0f1 patch. You can read about the issues, and click a link to download the patch, in this KnowledgeBase document.
Please let me know if you have any other questions or feedback on the VI Analyzer.
Darren N.
LabVIEW R&D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman
Similar Messages
-
Non-existent errors in Problems view
Hello,
Sometimes flash builder shows non-existent errors in Problems. "Project clean" helps, but errors appear after several compilations again.The problem was in pure action script class that extented MXML component.
After deleting that code all problems were dissappeared. -
RHX5 showing non-existent style
We imported two Word docs, using the same style sheet both in
the doc and in RH. All the styles are fine in both docs, except for
one style. Doc A shows a good style "InstructionIndent", but in Doc
B, the RH style field shows that RH has seen the same style as
"INSTRUCTION". The css has been applied to all chapters. The style
looks fine in the original Word doc.
1) Does the all caps font of INSTRUCTIONS mean something
special in RH, such as a non-existent style?
2) Do I need to change all of these styles manually, or is
there an easier way?
Thank you,
Linda> When I transport the same Directory config from XID
> to XIT due to an additional change I have made, I get
> the error about the business system:
>
> Business system XE_DEV_3RD_IMS_001 is not assigned a
> business system in group XE_ESAP_TST_001
>
Can you let me know if XE_ESAP_TST_001 is the Quality Objects Group?
If yes, then can you check if you have created the transport target for the Business System XE_DEV_3RD_IMS_001 ?
If you do not want this Business System to be a part of the New transport, i.e, you do not need this Business System in your transport, then my gut feel here is that one of your Config Scenarios still contines to use this Business System or,
You are trying to import a Old version of your TPZ file.
Regards
Bhavesh -
OEM discovery - shows non-existing DBs
Hello All:
When i try to discover a node/host , OEM discovers non-existing databases as partially configured. These databases have been deleted a while ago. How do we clear them? oratab doesn't have entries for these databases.
Thanks
S~There arent any refs in listner.ora of those deleted dbs. I changed the tns_admin from $ORACLE_HOME/network/admin to $ORACLE_BASE/admin/SID/tns_admin as i am using a wallet. This may have probably introduced the confusion.
Thanks
S~ -
None exist error code after a graceful shutdown
I'd like to return a none zero exit code after a normal graceful shutdown.
My end task is to be able to send a restart event to a number of machines running my application that will gracefully shutdown and inform the shell script that started it that it wants to be restarted.
One option would be System.exit with a shutdown hook that monitors the current threads, and does not end until the other threads have also exited, but I would have to inform this hook of threads that should be allowed to finish naturally. But that seams a little [t]icky.
I guess I could write to a file, and then close down naturally. But this leaves files drifting about. I'm not overly keen on that either.
Any other suggestions? Thanks, MikeThe "worker" thread should
not be interupted, and told to exit, just left to
exit under there own steam. (when they have finished
the current job). What is the "worker" thread ? Is it what I meant with "watcher" thread ? Is that what you said or what I said ?
And, I assumed we are talking about a server-like application, that is one running indefinitely, as opposed to one that would perform a specific task and then terminate. Am I correct ?
The initalization of this new type of
shutdown/restart is currently undefined, but will
likely that the application start listening on a
socket connection. I'm sorry, I don't understand that at all.
I want this to ease deployment,
currently when I deploy a new version I type "ant
deploy", then VNC on to each of the computer
(currently just 3, but likely to be more soon) and
manually restart. What I want is to just type "ant
deploy" it sends a signal to the running copies, and
they restart themselfs. (I'm a lazy brsatard).You know this quote by Larry Wall (?) about the three most important characteristics of a programmer, don't you ?
>
and thus the exit code is already defined.Not so with what I would consider a "graceful
shutdown". Then the application would shut down as
all the threads have completed.It depends on whether having "all threads completed" is a normal part of the application's flow. If I assumed correctly we were talking about a server-like app, then it's not. Ergo the command to terminate has to be issued at some point. The question is how that gets done. For instance, if you send a CTRL-C from the shell, your application shuts down with an error code != 0.
A graceful shutdown needs to be initiated somewhere. How do you plan to do it ? -
Excel Filter Shows Non Existent Missing Members How to Remove them?
I have a tabular model cube in SSAS 2012 I am adding a filter to my excel pivot table and it shows a blank member that does not exist. If I use a slicer I can "hide empty members" but when I use a filter there is no such option. Is
there a way to remove this selection for an empty member?Hi Jimlaf,
In your scenario, you connect to a SQL Server Analysis Server Tabular model cube in Excel. It shows a blank member that does not exist in the filter, however the empty member were hidden automatically in the slicer. Now what you want is removing the empty
members in filter, right?
I have tested it on my local environment, I got the same results with yours. And based on my research, it seems that this is the default setting, there is no such an option to remove the empty members in filter.
If I have anything misunderstood, please point it out. Thank you for your understanding.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support -
Front Row shows non-existent content under Podcasts
This occurs when I access my Podcasts from Front Row. In addition to my current content, I see entries for old podcasts that were long ago unsubscribed and deleted. They don't appear in iTunes or any of my iDevices, only in Front Row. How do I update Front Row with the fact that these podcasts no longer exist in my iTunes library?
I found the answer elsewhere here. Sorry, I lost the link to it. But the steps are to first create a Smart Playlist in iTunes, with the criteria set to pull up the offending "ghost" conent. Lo and behold, mine did in fact appear. Then, select the content, hold down the Option key, and press the Delete key to delete it (really delete it, not just the "pointer" to it in the playlist).
This worked for me. And I also didn't know about Option-Delete, which is quite handy. -
Bonjour shows non-existent computers
My Bonjour Screen Sharing app and also the "Network Places" menu in the Finder are showing Macs that I once used (and no longer are running) and never even used with my new laptop, yet both my MacPro and MacBook Pro show these as Bonjour computers, even though those macs were never on the same intranet as my personal machines.
Is there a way to clear cache of my computers? I have already verified in Sys Preferences that they are not in the Sync List.
This is not isolated...one of my old co-workers also had this problem several months ago.To deauthorize all computers associated with your Apple ID
If you need to authorize your new computer and are unable due to already having five authorized computers, you can deauthorize all computers by doing the following:
Click iTunes Store on the left side of iTunes.
If you're not signed in to the store, click the Account button, then enter your account name and password.
Click the Account button again (your Apple ID appears on the button), enter your password, and then click View Account.
In the Account Information window, click Deauthorize All.
Then simply authorize those that you actually have. -
Hi All,
I'm currently using an 3 IPad 64GB WIFI/3G and Having a really annoying Calendar Sync Issue, 2 out of 3 are having the same exact problem, I'm not to even sure how it even happen BUT... perhaps maybe when i delete or make a change into the calender, it doesn't sync back properly
I sync lotus notes calender via the internet to my mail server at work, when I sync my calender, it shows non-existent entries out of no where, I check my current lotus calender, and when i compare it to my Ipad calender, there a few entries in the IPad that doesn't even exist in the Lotus Calender.
I deleted the calender and redid the sync, it doesn't go away, anyone has this sort of problem before?
It really bugs me when I know i need to check for meetings, but that meeting is really arranged since it has been deleted or moved....All calendar entries from my I-Pad, I-Mac, & PowerBook work, just not my I-Phone entries. Where do I set up my sync on the I-Phone
-
ACE# sh script code - Error: Called API is invalid or non-existant
What is this ??
ACE# dir disk0:
2846 Jun 14 2010 15:40:33 NORDICID_PROBE
ACE# sh script code NORDICID_PROBE
Error: Called API is invalid or non-existant
Hardware is ACE-4710-K9 and software A3(2.7)
The probe itself is functioning ok according to show probe detail.
However show script script_name probe_name -counters all remain at zero for some reason. This wasn't the case on the previously use ACE software.
To my recollection the command show script code has worked successfully before on the same ACE software. Not 100% sure though, but it definitely worked on the previous software we ran on the ACE.Hi Timo,
You could be hitting CSCtu33866 (see
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtu33866 for more details)
If you are really hitting this bug, a reboot should fix the issue.
I hope this helps
Daniel -
DBMS_LOB.FILEOPEN(dir, fname) gives non-existent dir or file error
Hello!
I've been trying to load an image file into the oracle database using the DBMS_LOB loadfromfile procedure. In order to do this, I first have to open the appropriate file which I do using
temp_bfile := bfilename('temp_dir', in_filename);
where in_filename is a string having the appropriate filename. and 'temp_dir' is a directory object created as follows:
CREATE DIRECTORY temp_dir AS 'F:\';
Next when I do a
DBMS_LOB.FILEOPEN(temp_bfile, LOB_READONLY);
I get an exception ORA-22285:non-existent directory or file.
What am I doing wrong? Is the way I've created the directory object correct. I work on an NT machine.
MonaNot sure if the UTL_FILE package is the same but if you don't set the "utl_file_dir" variable in the INIT.ORA file prior to calling the FOPEN procedure you will get a similiar error. There may be an equivalent parameter for the DBMS_LOB package.
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Mona Marathe ([email protected]):
Hello!
I've been trying to load an image file into the oracle database using the DBMS_LOB loadfromfile procedure. In order to do this, I first have to open the appropriate file which I do using
temp_bfile := bfilename('temp_dir', in_filename);
where in_filename is a string having the appropriate filename. and 'temp_dir' is a directory object created as follows:
CREATE DIRECTORY temp_dir AS 'F:\';
Next when I do a
DBMS_LOB.FILEOPEN(temp_bfile, LOB_READONLY);
I get an exception ORA-22285:non-existent directory or file.
What am I doing wrong? Is the way I've created the directory object correct. I work on an NT machine.
Mona<HR></BLOCKQUOTE>
null -
KM transport error: ALL paths that were specified refer to non-existent
I have a folder /root/company.
I am trying to transport this company folder to my QA system.
I created a KMC file. I followed the instructions in below link.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/46/77da3bb8036ef0e10000000a1553f6/frameset.htm
IT throws an error during import. All paths that were specified refer to non-existent or read-only repositories.
Can anyone please suggest, what am I missing? Do I have to create any repositories on QA system. IF so, please suggest me how to do it?.
We are ussing EP 7.0 portal
Thanks,
RajAs per my understanding you have created KMC file for folder "company" which is inside "root".
Can you confirm if company folder exist in QA environment?? if it dosenot exist then create repository by performing following steps:
1. Go to System Administration --> System Configuration --> Knowledge Management --> Content Management --> Repository Manager --> File system Repository OR CM Repository (as per your requirement)
2. You can find whether you have to create Repository inside File System Repository OR CM Repository by looking into your test or developement environment by going into the path mentioned in step 1. Copy all the properties of the Company repository from test or dev environment.
3. Now inside one of the repository(File System Repository OR CM Repository) you can create one repository with name Company.
4. To create Company repository you will find the option "NEW" inside the above mentioned path and on clicking on the same, fill all the properties (take help of the properties you have copied in step 2).
And now try to upload the KMC file. -
Error: "All paths that were specified refer to non-existent ..."
Hi,
On the import of the KM Content I have the next error: "All paths that were specified refer to non-existent or read-only repositories".
I used the following links:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/46/77da3bb8036ef0e10000000a1553f6/frameset.htm
https://forums.sdn.sap.com/thread.jspa?threadID=1347171
http://forums.sdn.sap.com/thread.jspa?threadID=1544261
Please could you help me?
Thanks in advance.Hi,
Please refer the following thread
https://forums.sdn.sap.com/thread.jspa?threadID=1347171
http://forums.sdn.sap.com/thread.jspa?threadID=1544261
Regards
Priya -
I wrote a program on a laptop in our lab that used both the NI Elvis power supplies and DMM. On the laptops in the lab, which connected to NI Elvis through a board in the NI-PXIe device the program worked perfectly both as a vi and as an executable. The program needed to be put on some computers in another lab for student use with a different version of labview, and everything worked except for the variable power supplies. I activated debugging and it reported Error 7 at New File, NI 488: Non-Existent Board. After attempting to trouble shoot this and not finding any helpful results I attempted to rewrite the program on the computers directly, since I could only put the program on the computers as an executable since it was written in 8.6 and the computers only have 8.0 and 8.2. To begin I was going to launch labview from NI Elvis to use one of the example codes as a base for my program. When attempting to do this I got Error 2 with the possible causes being Labview memory full and NI 488: Write detected no listeners. My question is are the two errors related, and how can I fix these errors? All the NI Elvis software is 2.0, the original program was written in Labview 8.6, the computers have Labview 8.0 and 8.2 on them. The NI Elvis devices are connected directly through the computers, rather than through another device, I'm not sure if this might be causing some obscure hardware issue.
Hello Chris,
It looks like this error is associated with not having administrator privileges. Take a look at this other forum post for more information:
http://forums.ni.com/t5/Academic-Hardware-Products-NI/Error-2-when-starting-LabVIEW-from-ELVIS-Instr...
If you can log in as an administrator you should be able to avoid getting error 2 when you launch LabVIEW from NI Elvis. Alternatively, you can upgrade to NI-ELVIS 3.0, because the issue is fixed in that version of NI-ELVIS. You can find this by going to ni.com/support and searching for "NI-ELVIS 3.0"
Colden -
when trying to download yosemite it sais that i do not have enough memory. when i look at my memory use it shows that 111.00gb of space is used by movies but when i go th the movie folder it is empty. how can i remove the non existant movies.
Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.
You will need a minimum of 10-12 GBs of free space to install Yosemite, however, that is a bare minimum and should be at least twice that amount.
Maybe you are looking for
-
Itunes from hard drive to new computer
Hi All I have the following issue, I have my itunes (all music, tv shows,films andf iphone 4 back up) on an external hard drive that has 232GB of space I have read that i need to consolidate the libary to move it, but i have 137GB of information and
-
Hardware recommendations for capturing VHS / RCA composite better than Hauppauge USB?
Hi folks, I am trying to archive our old VHS tapes (NTSC 720x480 29.97 fps). I am using a $45 Hauppauge USB-Live-2 Video Capture. It's certainly adequate to see what's happenning in general, but it's also not as good as one would see e.g. playing the
-
Multi-Mapping "Split mapping created no messages"
Hi there I have some issie when trying to create multiple messages from a single message. I am using file to file adapter and in the interface determination, enhanced config. Also my file structures are setup correctly. The inbound and outbound struc
-
Lightroom 1.0 and size restriction (limit)
Does anybody know what the size limitation is in the new version ? I personally think it is a design flaw that users cannot use Lightroom to catalog large files. I understand that doing any adjustments or the like could be too much for the program to
-
I ordered a product for teacher twice by error, of course because there is no reason to pay for the some product in the same time. I need to know how to cancel one of them. I am trying to talk with someone since last week. Adobe Creative Cloud