Vi conversion from 8.5 to labview 10 regarding.

hello sir,
The source code was originally built in labview 8.5, but after
that updated to labview 10.The os is windows7.
Problem: the Pc reboot or shut down automatically once in 2 days
,especially night time.
Pls change this application compatible to labview10 drivers,win7.
with regards,
uma maheswari,
Application Engineer.
Elnix Technologies(chennai)Pvt.Ltd.
Attachments:
LTR 13.02.14 21.55.zip ‏1890 KB

I haven't heard of any issues on this issue.Â I believe that crdb_odbc.dll will just "take over" from p2sodbc.dll.Â Have you tried Database | Verify Database?Â Perhaps that will just give the database engine a little nudge.
Â
Otherwise, I think you may have to talk to support as I don't think this is a report design issue but a support issue.Â :(
Â
Â Â Â Â - Kathryn Webster (Report Design Consultant)
Â Â Â Â Â Â Â Â Â Â Kat's News: http://diamond.businessobjects.com/blog/279

Similar Messages

Conversion from Excel time to labview time

Hello all,
I want to convert the excel time stamp to labview time stamp. Can you all please help me how to do this ?
In my application labview time is 05-11-12 14:56:00 and its equivalent excel time representation is 41218.6222222222.
I tried this formula,
Labview time = 24*3600*(Excel time - 1460) but anwer is wrong.
Thanks.
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet

Ok, here's what I found. The conversion is: Time Stamp = 86400*(Excel Time - 1462). But here's the kicker: the timestamp is GMT. You have to add your time zone offset as well. I'm in the Eastern Time Zone, so I had to add 5 hours. I'm not sure what DST will do to this. I'm sure there's ways around it, I just don't have time to look into it more right now.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Excel Time.png ‏10 KB

Conversion of an Instrument Driver from LabWindows/CVI to LabVIEW

Hello All,
Conversion of an Instrument Driver from LabWindows/CVI to LabVIEW
http://zone.ni.com/devzone/conceptd.nsf/webmain/9A93316BEBEDB17786256FA300675A0A
But I can not find any hyperlinkt to download
"LabVIEW Interface Generator for LabWindows/CVI Instrument Drivers"
Is there any evaluation version for downloading?
Thanks,
nonomiya

So strange,
I go through three pages but does not find any entry for download,
hmm...,
1. After press the hyperlink,
See Also:
LabVIEW Interface Generator for LabWindows/CVI Instrument Drivers
2. and for a resuest info. form.
3. press download..
====
LabVIEW Interface Generator for LabWindows/CVI Instrument Drivers
System Requirements
NI LabVIEW 7.1 or later
Windows 2000/NT/XP
Use the LabVIEW Interface Generator for LabWindows/CVI Instrument Drivers to create LabVIEW VIs for VXIplug&play and IVI-C instrument drivers from function panel (.fp) files.
Instrument Driver Network
Before using the conversion utility to create a new instrument driver wrapper, please visit ni.com/idnet to see if a LabVIEW Plug and Play instrument driver is available for your device. The Instrument Driver Network (IDNET) provides support for more than 3,000 different instrument models from over 170 different instrument vendors.
Recommendations
This utility was created for developers of C-based instrument drivers who wish to provide a LabVIEW interface, but do not develop a LabVIEW Plug and Play driver. By developing the C and LabVIEW interfaces together, it keeps the components synchronized, and eliminates the need for customers to create their own LabVIEW interfaces. Vendors should distribute the LabVIEW wrapper files with the associated VXIplug&play or IVI instrument driver, so that end users do not have to visit multiple web sites to download the complete driver.
If you are not an instrument vendor, we recommend that you use this utility only if you have instrument driver expertise. Access to the instrument driver source code is preferred, in case you need to edit the C instrument driver in LabWindows/CVI.
After generation, the wrapper VIs should be tested with the instrument.
Instructions
Once you install the software, simply access the utility from the Tools>>Instrumentation>>Import CVI Instrument Driver...menu in LabVIEW. This software replaces the built-in tool and provides feature enhancements.
For additional information on this utility, view the resources below.
Readme for the LabVIEW Interface Generator for LabWindows/CVI Instrument Drivers
Submit your Driver
Visit the Instrument Driver Network
nonomiya

Getting ÿþ as saved conversations from Lync in Outlook in Office 2013

Hi,
I've been trying to get to the bottom of this and have found similar posts, but no one seems to have an answer.
When I IM someone using Lync 2013, they get a pop up notification but instead of the message they see ÿþ<. Once they open the chat window, they can see my typed text. Occasionally, certain people can't see the first line of my chat, but as
long as they keep the chat window open, they can see everything new I type.
All my conversations that are saved in outlook show ÿþ< for the text and are unreadable. I've disabled the saving of conversations because they have become worthless.
I believe it has to do with BOM but have not been able to find a way to fix this.
If I copy a conversation from the chat window and paste it into Microsoft Word it shows ÿþ<, but if I paste it into notepad the conversation appears.
(I had inserted a screenshot here, but am unable to because I am unable to figure out how to get my account "verified")
I've tried changing the preferred encoding for outgoing messages: to Unicode (UTF-8) in Outlook, but this had no effect and I can't find a similar option in Lync 2013.
(I had inserted a screenshot here, but am unable to because I am unable to figure out how to get my account "verified")
I enabled logging for Lync and the event IDs that come up are 1, 11 and 12, to which I cannot find any information for at the moment.
Any help and or suggestions would be appreciated.

Hi,
Did the issue happen only for you or for multiple users?
Please try to delete Lync User Profile and information on Registry, then repair Office 2013.
The path of Lync User Profile: %UserProfile%\AppData\Local\Microsoft\Office\15.0\Lync
The path for information on Registry: HKCU\Software\Microsoft\Office\15.0\Lync\[email protected]
Then test the issue again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Project Conversion from 11.03 to R12- need help

Hi All,
I need some information regarding conversion from 11.03 to R12 along with Capital Project's conversion, do we need to take care Asset Assignment and Assets information at the time of Project Conversion. Iam doing Project and Task conversion different. Is there any good mapping document or Conversion FD, if any body have please send my mail ID. [email protected]
Thanks for your help.
Thanks,
Srini..

Usually only Open Invoices and Unapplied Receipts are migrated from Old system to New Instance.
Post Migration Reconciliation shall be tough in that scenario. Reconsider/Rediscuss with Client.
Migration can be done using APIs or Custom Scripts using Standard Interfaces.
Hope this is helpful
Regards,
Sridhar

FM for Material number conversion from R/3 to APO in R/3

Hi,
   Can anybody tell me conversion exit (function module) for Material number conversion from R/3 to APO in R/3 system. I mean i have 18 digit R/3 material number which i have to convert to 40 digit APO material number in R/3 system.
Please suggest to win full points.
Thaniks in Advance,
Chandan Dubey

Dear Chandan,
Conversion Exits:
CONVERSION_EXIT_MATN1_INPUT ....... If you are storing Material With Zeros
Then concatenate it with 22 zeros. i.e. '0000000000000000000000000000'.
For example:
data : v_matnr type matnr,            "R/3 Material
       v_apo_matnr(40) type c,        "APO Material with 40 length
       v_zeros(22) type c. value '0000000000000000000000000000'.
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
       EXPORTING INPUT          = v_matnr
       IMPORTING OUTPUT         = v_matnr.
concatenate e_mantr v_zeros into
            v_apo_matnr.
Regards,
Naveen.

Conversion from u0091Stringu0092 to type u0091Dateu0092

Hi,
I am fetching a date from DeliveryDate TextBox from Sales Order. I enter as 10/03/2007. As I need to fetch this value and store it in Production Order DueDate records through SDK Code.When I fetch this value from code,I get as 20070310. When I try to update my Production Order DueDate it gives me an Error Msgbox Conversion from string 20070310 to type Date is not valid. Here is my code to update production order.
Dim DelDt As String
DelDt = MyForm.Items.Item("12").Specific.value
Here DelDt shows 20070310
Now I have created an object of ProductionOrder and try to add Records,
sboProdOrder.DueDate = DelDt
On the above line it gives me that messagebox.
Can any one help me as to how can I convert this code in a working one or how to convert the string to date in VB.Net
Thanks a lot
Murtaza

Hi Murtuza,
Retrieving the value from a date-field through the value always returns the date as a string in the format yyyymmdd.
the field DueDate is a field of type DateTime.Date. to enter the date in this field, you must convert the string to a date.
The following line converts the date-string to a date.
new DateTime.Date(left(DelDt,4), mid(DelDt,5,2), right(DelDt,2))
Regards
Ad

Date/time conversion from UTC to CET

Hello,
Jjust a little question to our SAP BI community!
Is there a BI function/ggod way that converts a (datetime) string DDMMYYYYHH:MM:SS in UTC time zone into a string DDMMYYYYHH:MM:SS in CET timezone ?
We receive this string in input in a flat file and need it to convert from UTC to CET.
Or do you know any way to convert a date/time from IUTC to CET, eveen using an ABAP function?
Thanks a lot,
Matthieu

Hi,
Check this thread for time conversion from UTC to Local time
[ABAP statement for converting UTC date/ time to local date/time],
Regards,
Daya Sagar

Short dump: Conversion from type 'c' to 'v' not possible

Hi,
When do we get the following error? 'Conversion from type "c" to "v" not possible'.
I am getting this dump when I try to assign a structure to a field symbol.
This is happening only for a specific structure type.
Thanks in advance,
Regards,
Wenonah

Hi,
type - v is Structure with internal table , deep structure....
u might have declared the field-symbol as a typed one.....
Declaring it a generic one like type any as suggested in above post might solve the problem.....
Cheers,
Jose

IMessage - "new conversations from" ios 7 iMessage backups

Hi, So I'm having two issues at the moment but I'll start with the "new conversations" issue. I just upgraded to the 5S and did a iTunes restore on the phone, restored using my backup and then activated iMessage which took a few hours before it actually happened. Any time I try and start a new conversation from my mobile (cell) number, iMessage automatically sends it as a standard SMS message (green) and not as a blue iMessage but when I start the conversation from an email address, iMessage works as normal but from "Messages" on my Macbook, I can send from my mobile number just fine so I'm not sure what's wrong.
The second issue I'm having is that on my Mac, I have way more messages from one of my contacts, they go back quite a while but on my iphone they only go back as far as start of September. Any way how I can get iMessage on my Mac to force sync to my iphone and reload all my messages?
Regards,
Michael

bump. first issue resolved, second I'm still experiencing issues with.

Conversion from BO 5.1.9 Deski to BO XI 3.1 SP3 Webi

Hi Everyone,
As part of of our project, we are executing a BO upgrade project and have undertaken BO report migration and conversion from deskI in BO 5.1.9 to WebI in BO XI 3.1. The conversion of reports was assumed to be carried out through the report conversion tool (RCT) of BO XI 3.1 SP3. However, RCT has failed in converting all deskI reports to WebI.
Hence, we are seeking your help & assistance in finding out, the optimal way of resolving the problem. Can you please indicate:
1. Is there any hotfix/patch that SAP can provide for making RCT more robust resulting in elimination of conversion errors/influence the success rate of report conversion?
2. If no hotfix for RCT is present, can we get quick answers from SAP through the alliance for resolution of these report conversion errors? We have received the below errors when we made an attempt at report conversion
1.Breaks in Web Intelligence can only be set on objects present in the block
2 Objects cannot be hidden in Web Intelligence documents
3.Page setup options are not implemented in Web Intelligence (First page number, page order, scale, Fit to N pages)
4.Across options for crosstabs are not available in Web Intelligence -5.Detail variables have no associated dimension in Web Intelligence 6.Conditional or permanent Hide Header not available in Web Intelligence 7.Function not available in Web Intelligence
8.The formula of a global filter in Desktop Intelligence cannot be migrated into a Web Intelligence report filter
9.A formula from a Desktop Intelligence block filter cannot be migrated into a Web Intelligence block filter
10.Unsupported 'Do not retrieve data' option
11.Conditional or permanant Hide Footer does not exist in Web Intelligence
12.Keyword not available in Web Intelligence
13.Unsupported Data Provider
Anticipating your help and cooperation at the earliest. Please let me know if you need any more information.
Many Thanks & Regards,
Sandeep

Report Conversion Tool cannot guarantee 100% conversion rates. It's imposible due to functionality differences that still exist between Full Client/Deski and Webi documents.
If you have a report that won't convert - you will have to manualy re-create it in Webi. It'll show you if design you use is even possible there or not.
As to the list of errors you provided - each one has to be reviewed and investigated to see why it happens.
Like #3 - might be due to the fact that Webi has no page options or #13 might indicate unsupported data provider, lust like the error says.
You might want to open a support Incident to properly investigate all the errors you received, but keep in mind - 100% conversion is not possible unless you use simplest reports.

Conversion from Integrated ITS to Webdynpro

Hello,
We are starting a conversion from ITS ESS Services to the Webdynpro for Java Applications on the portal 7.0....I want to know that as a whole we have to understand the current ITS ESS services and the Customizations done ....and map them to the Webdynpro applications as a fresh implementation or there is something else to be done specifically ?...
Please let me know if there are any specific tasks to be done or steps to be followed.
Any help would be highly appreciated.
Edited by: SubhashTripathi on Mar 10, 2008 9:22 PM

You won't find any content for the "old" Training & Events module in the latest ESS/MSS business packages - any standard content delivered in those typically relates to the newer Learning Solution (LSO) component.
You can just create a couple of custom IAC iViews that run services PV7I and PV8I on the integrated ITS, and put them in your ESS portal role.
Excerpt from note 870126:-
The following international ESS applications based on Standalone ITS have been or will be converted to integrated ITS Version 6.40, and can still be used with SAP ERP 2005. You can integrate these applications using ESS Homepage Customizing if required:
International ESS Services available on the integrated ITS as of SAP ERP2005:
Training Center (PV7I) (see Note 771196)
myBookings (PV8I) (see Note 771196)
Regards,
John

KDL-42W807B doesn't support conversion from 2D to 3D

Hi, i just bought TV model No KDL-42W807B and it doesn't support conversion from 2D to 3D and i need to play my ps4 games in 3D mode so is there is any thing can i do to let my tv convert 2d to 3d or what type of suitable converter to do this job for my ps4

Hi mohands,
The TV model you have provided appears to be not a US model and we are unable to check its specification.
For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
Thanks,
Jerome
If my post answers your question, please mark it as "Accept as Solution"

From vision builder to labview

Would anyone possibly know how to convert a tool developed in vision builder for automated inspection into labview so that when we connect a thermal camera and have a live image, the tool from vision builder analyses the image on labview?
Thanks for the help

It is very weird, this is what I get as a reply when I try to convert from VB AI to LabView
And here is also a picture of my NI License Manager, from where I have activated "successfully" VAS and VDM...
I don't understand why it won't work...
Attachments:
conversion impossible.png ‏259 KB
NI license manager.png ‏107 KB

Conversion from .ai to .svg issue

Hello all,
I'm having problems regarding the conversion from .ai file to .svg file.
The problem, as you can see the attachment files , is an alteration of the image.
I wanted to ask you, certainly more experienced than me , if is there a way to solve this problem.
(I have activated the adobe optimization in the save as dialog.).
Ps:
If I open files created with Adobe does not appear to be no problem, but if the file is opened by an application like Inkscape or our application the image is altered.
Thank you in advance for any suggestion /tips .
Ivan

OK try Flatten Transparency and then Expand to make the Gradients into Blends

Vi conversion from 8.5 to labview 10 regarding.

Similar Messages

Maybe you are looking for