.vi's unable to run because of real-time Startup error
See that attached files for the error. Whenever I try and deploy the code onto the robot the attached error comes up. Is there any fix for this or is this a new error? I have also tried a completely new C-Rio project so that it is the basic settings that FIRST gives us. This same error comes up with that one also so I am thinking it is a computer problem on my end.
Attachments:
Error part 1.JPG 30 KB
Error part 2.JPG 14 KB
It sounds like there is a start up application already on the cRIO that has different versions of these VIs as dependencies. I'd recommend turning on the NO APP setting on your cRIO. Depending on which cRIO you have this will either be a hardware switch on the cRIO or a setting you can change in Measurement and Automation Explorer.
Miles G.
National Instruments
Applications Engineer
Similar Messages
-
Getting "Unable to run script at line 1: syntax error" error?
Hi,
I want to run a script using the AEGP_ExecuteScript() function. but I got an error "Unable to run script at line 1: syntax error". what could be the rea son for this? shall I inlcude anything extra info in my project?
Below is the code ...
char scriptPath[] = "F:\\Documents and Settings\\akshays\\Desktop \\Active Shutter.jsx";
A_Boolean platform_encodingB = 'B';
AEGP_MemHandle outResultPH0;
AEGP_MemHandle outErrorStringPH0;
utilitySuite5->AEGP_ExecuteScript( pluginID, scriptPath, platform_encodingB, &outResultPH0, &outErrorStringPH0 );
please help me.
Thanks
ManjunathThis can be debug by using "ExtendSCript Toolkit 2 and Debugger".
Just open Edit -> Prefernces -> General -> ****
There enable checkbox "Enable javascript debugger".
if you encountering an error while launching the script, then AE will automatically open your script in "ExtendSCript" toolkit with an error at the bottom line. You can see the "DataBrowsing" panel right side for available functions., objects and so on.
then you can get to know what is the error and the reason for this error at least. -
Error: 0271: Real Time Clock Error - Check Date and Time settings.
Hello all,
I have lenovo T430s laptop that is configured with Bitlocker encruptions and TPM PIN entry. I don't think that has anything to do with the error msg I am getting but here it is. Error: 0271: Real Time Clock Error - Check Date and Time settings.
Press Esc to continue or F1 to enter setup. I am unable to get into BIOS or even the login screen for Windows 7.
Any advice would be appreciated.Thanks to everyone for the help. Just want to close this out. I had a IBM/Lenovo technician here today and he replaced the CMOS battery. Upon the change, the computer is fine being reconnected to the dock (the three times I tried it). So it has been resolved with the battery. Surprised by the incompatibility claim because I am not having issues now. Wondering if it's just a USB 2.0 vs. 3.0 thing (and Lenovo trying to sell more peripherals, of course).
Thanks! -
X121e randomly wake up from suspended status and real time clock error
Hi all
Previously I considered my x121e suffer from overheating issue and causes real time clock error (RTC). However, after more testing and investigation, I believe the problem is related to other hardware issues and I like to hear people opinion before sending the laptop back to Lenovo.
The machine goes into suspend status either pressing the power button or closing the lid from Windows7 (clean install) without problem. However, it would wake up itself randomly, "beep" twice and screen shows RTC and CMOS checksum error. This happen more often when I am holding the machine (i.e. some movement/vibration). I wonder:
- Is it the RTC battery problem, cause the RTC to wake up the machine?
- Other hardware failure?
The laptop has a clean OS installed/recovered. Latest 1.16 Bios installed. No USB or memory card attached. Ram replaced and not the cause.
Please advise
HowardHello,
I am unsure; you would have to contact Lenovo directly and find out how they handle this situation. They may want the ThinkPad X121e back so they can run thorough diagnostics on it, just in case the problem is something else. That way it gets fixed the first time.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Real Time Clock Error - Check Date and Time settings, System CMOS Checksum bad
Hello everybody,
Can help anyone to resolve my problem.
I have an Thinkpad W520 (42823FG), BIOS 8BET60WW 1.4 When I disconect AC power and remove battery and connect again, I see this message on screen:
"Real Time Clock Error - Check Date and Time settings, System CMOS Checksum bad
Press Esc to continue or F1 to enter Setup"
Is this a system board problem or CMOS battery problem ?
Thank youHello and welcome,
It's probably (hopefully) just the CMOS battery. The easiest way to find out is to just replace that battery.
Page 85 of the Hardware Maintenance Manual:
Hardware Maintenance Manual
Here's an example of the battery. I'm not recommending (or not) this vendor:
http://www.ebay.com/itm/New-Lenovo-ThinkPad-W500-W510-W520-W530-W700-W701-W701ds-CMOS-RTC-Backup-BAT...
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
photoshop cs3 stopped working. get error - unable to continue because of a hardware or system error. Sorry but the error is unrecoverable. Reloaded software - but not resolved. Any advice? Someone mentioned Settings files or profiles?
This occoured in Photoshop CS3 today. All other Adobe products are functioning normaly on this system. Premiear CS3, Encore, Audition function fine. Photoshop was working fine then failedduring the evening. We have removed and reloaded Photoshop CS3 and recieve the same error. Still the remaining Products run as expected. All other Aplications on the system run normaly as well. No other indications of hardware issues are logging. There is ample memory and space available on this system.
Someone else suggested I trash my PREFS (I am not sure How I proceed in doing that - any advice on how to delete the prefs - willing to try that at this point) Thanks -
I am unable to run Dreamweaver CS5.5, all of a sudden. I get 'error 1' - looks to be a configuration error. Please help!
Hi Xuxy,
Welcome to Adobe forums. Can you try this solution?
http://helpx.adobe.com/dreamweaver/kb/troubleshoot-javascript-errors-dreamweaver-cs4.html# main_user_config
Thanks,
Preran -
Running joystick on real time card
I'm using PCI-7041/6040E real time daq card directly running on windows (labview and the daq card installed in single computer).How can i communicate data between host and daq card? I want to use joystick while the joystick vi can't be download in RT excecution target. In this forum says it can be done if joystick vi is running on host and the joystick data is transfered to RT target, but for my condition (using one computer), Can I do this?
hello
the examples send data acquired with nidaq, but you want to send data from the joystick. see the attached simplified vis and read the documentation of the vis (right click on the vis->help). attached vis are not tested, so maybe you have to play around a bit.
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"
Attachments:
Joystick_SharedMemory_7.1.zip 28 KB -
CRIO-9067 Real-time unexpected error restart (Hex 0x661)
Hi all,
I recently moved to LV2014 SP1 and NI-RIO 14.5 to support development of a cRIO-9067 Linux RT controller. The past two days of development have seen LabVIEW crash numerous times (eight at last count), along with numerous VIs being in an undeployable state due to some unseen error (there's no broken run arrows anywhere, and a LV restart seems to cure what was broken).
The above issues are tolerable, if somewhat annoying. What's concerning is the most recent error I received this morning. I had just run the top level VI from source (and verified it was running), went to make myself a coffee and came back to this error.
LabVIEW: (Hex 0x661) The LabVIEW Real-Time process encountered an unexpected error and restarted automatically.
The VI wouldn't have been running for more than 10 minutes. I've since tried to reproduce the error without luck.
This is somewhat concerning as the application for this cRIO will be 24/7 process control. Is this a known issue with the newer Linux RT controllers? Is there anything that can be done to detect the error in LabVIEW?
Below is a screenshot of the software installed on the controller:You should be able to access the error logs on your controller through MAX.
Is There an Error Log File for My Real-Time Controller?-http://digital.ni.com/public.nsf/allkb/E734886E027D0B6586256F2400761E30?OpenDocument
How Do I Locate the Error Logs on My cRIO if I Don't Have MAX? - http://digital.ni.com/public.nsf/allkb/9D2F9D4F8C834D678625766D00633837
Could you post the error log files for the Compact RIO targets that reproduce the error?
It’s possible that a memory leak is occurring someplace in your program that causes the crash.
Also, are you using the System Config Set Time.VI anywhere in your application? There has been a reported issue with this VI in relation to this error, but the hex code error is not common. We can try to cross-compare the issue internally to see if there are simlarities to the reported case.
Additionally, is this crash repeatable with other code, say a simple shipping example? I would imagine that the crash is related to a routine called in your program, but it’s possible there is a corruption in the software installation on your target.
Also, what is the ProcessCommandMessage.vi responsible for/doing in your application?
Will M.
Applications Engineer
National Instruments -
Hello,
I am using Hypservisor. With "Build Specifications" in the project explore I want to create a standalone real-time application.
In my first try I only want to print some texts onto the real-time console (HyperTerminal) using the function "RT Debug String.vi". I built the real-time application successfully and got the rtexe-file locally on the windows system. But as I tried to deploy the application to the target system, I got the error: "File not found". Please check the attached file "error.txt" for details.
I don't understand which file is not found. Or I used "\" as path separators. Is it wrong? I'd appreciate if you'd have any idea of the problem. Thank you very much.
Regards,
Scarletice
Solved!
Go to Solution.
Attachments:
ERROR.txt 1 KB
builds.zip 153 KBHello Casey,
Thank you very much for your reply and your interest in our project. We are using Real-Time Hypervisor for the setup of our test stand. We use the Windows system to show the GUI and the Real-Time system for the real-time machine control and online data storage. We use shared variables and shared memory for the data exchange between the two systems.
The system works generally quite fine now. But we still have to face new problems at each step forwards. I'm sure, I'll have more questions. I'd appreciate your advices. Thanks sincerely.
Best regards,
Scarletice -
ITunes won't run because of Quick Time issue
I can't get Quick Time to work, so I can use my ITunes. I have tried to reinstall. but it just gives me an error sending report.
Any help, pleae.That error message suggests that you have or have had one of the problem programs I listed. It is possible that one may have been installed with something else. You need to be sure you have got rid of these programs. They are bad news for Quicktime.
Here is the procedure if the uninstall fails - you need to do an installer cleanup:
Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program.
To run the program – All Programs>>Windows Install Cleanup
http://support.microsoft.com/kb/290301/
Now use the following method to remove iTunes and its components:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
*If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
restart your PC
Install the stand alone Quicktime and check that it works.
If it does, install iTunes. -
Unable to run any transaction. ABAP runtime errors generated
Dear All,
I am updating the SAP BASIS support package SAPKB70012 in the DEV
server. The import phase was running through SPAM. It ran for 40
minutes and resulted in a ABAP dump. syntax error in program. I tried
to run SPAM once again, It gave another dump. whichever Transaction, I
ran, it resulted in ABAP DUMP. So i restarted the server and the same
dump was getting generated. Based upon previous experience, I executed
the tp command
tp r3i SAPKB70012 DEV pf=D:\usr\sap\trans\bin\TP_DOMAIN_DEV.pfl
tag=spam -Dclientcascade=yes -Drepeatonerror=8
It gave two warnings and a prompt
Warning: Parameter DBHOST is no longer used
Warning: Parameter DBNAME is no longer used.
and logs are getting created continously in trans directory and temp
directory.
Can you please suggest me the reason and the appropriate solution, if
there is still anything to be done.
How long will it take to finish.
OS is Windows 2003
ERP 2005
Oracle 10g is the DB
Thanks in advance
AnilThank you.
I have gone throught the dump. and also pasting the dump below here.
For whatever the transaction may be, the dump is " syntax error in the program for the corresponding transaction"
I even cannot save the dump to the local file, again dump is coming. I took the printouts but could not attach them here.
SYNTAX_ERROR
syntax error in program SAPLSCP2.
the following syntax error occured in program "SAPLSCP2" in include
"CL_SALV_FORM_ELEMENT============CU in
Line 13...
I have already escalated the issue with high priority to SAP. But they still are not responding since 3 days.
Hope anyone can throw some light on it.
Thank you all -
Unable to run any transaction. ABAP runtime errors generated again and agai
Dear All,
I am updating the SAP BASIS support package SAPKB70012 in the DEV
server. The import phase was running through SPAM. It ran for 40
minutes and resulted in a ABAP dump. syntax error in program. I tried
to run SPAM once again, It gave another dump. whichever Transaction, I
ran, it resulted in ABAP DUMP. So i restarted the server and the same
dump was getting generated. Based upon previous experience, I executed
the tp command
tp r3i SAPKB70012 DEV pf=D:\usr\sap\trans\bin\TP_DOMAIN_DEV.pfl
tag=spam -Dclientcascade=yes -Drepeatonerror=8
It gave two warnings and a prompt
Warning: Parameter DBHOST is no longer used
Warning: Parameter DBNAME is no longer used.
and logs are getting created continously in trans directory and temp
directory.
Can you please suggest me the reason and the appropriate solution, if
there is still anything to be done.
How long will it take to finish.
Thanks in advanceI've the same problem.
Applying the patch, i've problems with the maximum number of lock entries in DB2 (-904), so the patch has been cancelled.
In this moment I can't logon to sap, i've a syntax error, and the problem continues -
Unable to continue because of hardware or system error
Im having a problem when running photoshop CS5.1
after deleting some fonts that were making the machine slow, I started having photoshop not running; a sign would appear like this:
Im running windows 7 ultimate. This happened after erasing many fonts that i wasnt using on my windows/fonts folder, so my guess is that i erased some fonts photoshop used or something like that. any idea where I can find a package that photoshop requires to work?
Indesign is working smoothly, so apparently only t
I was doing research to fix this problem and found the answer that worked for some: ctrl+shift+alt then erase preferences. But in this case didnt work.
Adobe Flash Professional 5.5, Adobe media encoder, and Adobe after effects arent working neither.
I found some answers related to how photoshop might not work with some fonts, or without some fonts, but cantt figure out which:
http://www.tek-tips.com/viewthread.cfm?qid=98975f
Thanks in advanceYou could restore the contents of your fonts folder, then (assuming that gets Photoshop working for you again) you could do the font cleanup more methodically, trying Photoshop to see that it still works.
Are you aware of the "Previous Versions" feature of Windows, with which you could restore the fonts?
-Noel -
Can only run Web form 1 time then error
I have a link to a form in my portal and the first time I open the form it works great. Then I click BACK and try again and it gives me the Error= (FRM-92050: Failed to connect to the Server:/forms90/I90servlet:-1). Why is it doing that? Also, How do I set the link to automatically open a new page when I click the link and login automatically? Thanks alot for anyones help!
Matthew,
I think the problem you are running into is that you restart a new application (or the same but in a new process) without closing the first properly. There is a known issue with OC4J in Oracle9iAS 9.0.2 that prevents us to start a second Forms session in teh same Browser process. I am just guessing here because I don't have an environment to reproduce - but it would be plausible.
For the link oart, you better ask in a Portel forum. Automatic login is performed using SSo in Forms.
Frank
Maybe you are looking for
-
Importing text from XML file, "\n" not working
Hi I'm currently trying to set up my game so it pulls in all text from an external XML file (to make switching between different languages easier). The problem is that on several occasions I need to use the special code "\n" to start a new line (for
-
Report Output in a web browser. URGENT!!!
Email: [email protected] I would appreciate if someone can solve my problem.... When I run a report from the report builder, the output is displayed in the web browser as when in live previwer, In view menu, web preview, Generate to Web browser in ch
-
I have tried everything Mozilla has suggested. Still when I click on a pdf, I get the message that the browser cannot open a pdf. I have gone through the help protocol, and it does not work. I have uninstalled Firefox and reinstalled it, and still no
-
Lenovo G50 BIOS in this system is not fully ACPI compliant
Hello everybody ! I kinda have a problem as the title states.My neighbour has a Lenovo G50 she bought and came with windows 8.1 x64 ( which she doesn't like at all and in my opinion win7 is far more superior ). The thing is I wanted to install her th
-
Does anyone else suffer tv signal loss when their apple tv 2 turns on?
My apple tv 2 has always worked fine. After the iOS 5 upgrade, whenever my apple tv turns on (randomly a couple times an hour) my tv signal goes in and out. The second the light turns off the tv is fine again. My tv is hooked up to Comcast, but the m