VI Server Port Error on Opening a Project

I've started seeing an error when opening an existing project in LabVIEW 8.0. The dialog immediately pops up with this message:
"The specified VI server port is already in use. the VI server for this project cannot be started."
There doesn't seem to be any problems editing and running part of the code. What is causing this? This computer is only used for development. The entire project runs on another computer. This seems to have started after I installed LabVIEW 8.2 on this development machine. This current project will not be moved to 8.2 until later this year when the final "home" for the project is upgraded to 8.2.
Thanks for any information

Justin,
This is the only project on this development machine. No error was generated when I tried an empty (new) project. I went into the "My Computer" properties page of the offending project and unchecked the TCP/IP option. When I clicked "OK" the properties page gave this error (verbatum):
Error 0 occurred at There was a problem applying the options from the General category. The error message is "Invoke Node in prefPage_MyComputer.vi"
This was followed with a list of "Possible reason(s)", all of which were rather cryptic. However, when I reopened the properties page to see if the change "stuck", it was unselected as you suggested. The original VI Server error is no longer being reported when reopening the project. As an aside, this computer has LabVIEW RealTime installed. Early on in the development of this project we had a realtime system attached to this computer as part of the development process. Now the realtime system is installed in the test rig with another host computer, but we are still doing some of the development on this original computer. This may explain why VI Server TCP/IP was originally selected in the project.
Thanks!

Similar Messages

  • "The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file

    Hi Techys,
    can you give me the suugestions for below error in sharepoint 2010.
    Error: "The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file.
    User having the contribute permission.
    as a admin i can open the document without any error.
    user wants to open the document via online and VPN connection.
    while the user seeing the document info the below error is indicationg .
    Offline Copy, Work book is readonly Mode.
    The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file which was upto date.
    Many Thanks,
    Madhu

    Make sure that the user is able to access workstream from the site collection through VPN. If the user is able to access already, try to download the file locally and see if the data is getting loaded and upload again.
    --Cheers

  • Getting error while opening Enterprise project type (EPT)

    Hello All,
    In Project Server 2013, I am getting error while opening any Enterprise project type (EPT) from EPT page or when I am trying ot create any new EPT. How can I troublshoot this, please help.
    Thanks in advance

    I searched ULS logs and got the below error details.
    Exception occured in method 'Workflow.ReadWorkflows' System.Data.NoNullAllowedException: Column 'WORKFLOW_ASSOCIATION_NAME' does not allow nulls.     at System.Data.DataColumn.CheckNullable(DataRow row)     at System.Data.DataColumn.CheckColumnConstraint(DataRow
    row, DataRowAction action)     at System.Data.DataTable.RaiseRowChanging(DataRowChangeEventArgs args, DataRow eRow, DataRowAction eAction, Boolean fireEvent)     at System.Data.DataTable.SetNewRecordWorker(DataRow row,
    Int32 proposedRecord, DataRowAction action, Boolean isInMerge, Boolean suppressEnsurePropertyChanged, Int32 position, Boolean fireEvent, Exception& deferredException)     at System.Data.DataTable.InsertRow(DataRow row, Int64 proposedID,
    Int32 pos, Boolean fireEvent)     at System.Data.DataTable....
    Let me know your advise on this.

  • Error message opening iDVD project

    Need some help figuring this out. I have completed my first DVD project. It is a simple slideshow of a recent trip. I made an image yesterday and it played OK and its 625 MG.
    I decided to burn it to my LaCie external burner today, but I can't even open the project. I get the following message: Connection Failed: This file server is running on your machine. Please access the volumes and files locally.
    I've tried opening the project by clicking on it or through iDVD and get the same results. I've restarted my Mac. I've always been able to open the project previously as I worked on it.
    Your advice to solve this problem would be invaluable. Thanks!

    Where are your images stored? Where is the iDVD project stored? How does a 'file server' come into play? What is on the network?
    I think you've hit on the problem if I'm understanding. The images and the project are stored on my computer. However, when I first tried burning this project about a month ago, I had an error message (can't recall what it was). I decided after that incident that my processor was too slow (700 MHz Power PC G4).
    I decided I would use our iMacG5 which has a faster burner so I used our network to transfer the project to the iMac from my eMac. The image I had created played well but I started having problems when I wanted to open the project and burn the DVD. For one thing, the iMac only has iDVD 4. I could see that this wasn't going to work so I went back to the eMac.
    Is there any way to salvage all my work. I really don't want to start over.
    When you create an iDVD 6 project, the assets you used remain in their original location - if ANYTHING changes , you have a problem.
    The photos I used are still in iPhoto and the original project is still on my hard drive. Do you need any other information?

  • TF80067 - Error while opening a project

    Hi
    Starting yesterday I got this error when I open a project from Project Professional. The project lives on a Project
    Online PWA. I can't find information about this error... :-/

    Hi Pedro,
    Try to disable the TFS add-in in MS Project Pro.
    See the procedure in this
    article.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • General Error When Opening A Project in FCE

    I have read many threads on this.
    My Config: FCE HD 3.51 / Intel Duo iMac
    When I opened the project (both from FCE and double click), it would not open and I received a General Error. My projects are saved in a folder called FCE Projects in my documents folder on my iMacs hard drive.
    I am able to open from my Auto Save - I moved this file to my desktop and renamed as the project copy - now I can open the project again.
    HOWEVER - when I move this project off my desktop back into my FCE projects folder, I get the same General Error again. Other projects from the same folder open fine.
    Any ideas?

    Try repairing permissions and re-boot.
    Al

  • Error message opening large project

    Error message opening a large project (600MB) on some stations. (Mac)
    [/Volumes/BuildDisk/builds/slightlybuilt/shared/adobe/dvamediatypes/project/mac/../../src/ TickTime.cpp-207]
    Projects open correctly after dismissing message 8 times. Events console shows 8 x "An input contract violation has occured!"
    Surprisingly, the project opens without error message on one station only. All other stations (same os, same version, Gpus or not) display the error message.

    >input contract violation
    That MAY be a permissions issue (over on the Windows side, a "sometimes" fix is to right click the program icon and select "Run as Administrator" from the option pop-up
    One the Mac side... ?
    Mac and Root User http://forums.adobe.com/thread/879931
    -and http://forums.adobe.com/thread/940869?tstart=0
    or
    Troubleshooting guide for Mac freeze
    http://helpx.adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-mac.html

  • General Error on opening several projects - even on all of the autosaves!

    I am trying to open a project I was working on last week and it gives a general error upon opening. I looked at some of the previous posts about this and tried resetting preferences, opening up autosave versions (which also give the general error), and repairing permissions. I can open many other projects perfectly. Then I found that another project I was working on last week is also giving the same general error and all of its autosave versions are also giving the error. Is the file corrupt, and if so, why all of the autosave versions too? Is there any way to fix this? (I have many work hours of time invested in each project and closing deadlines!)
    Thanks in advance,
    Nathan

    I found a solution! What had happened was I moved my "Music" folder from one hard drive to another and created an alias on the original disk to reference to the new location. What I did was change the name of the aliased folder and now I am able to open the project and reconnect the media to reference the new location directly instead of through the alias. Hurray!

  • Urgent help please: Error on opening MW project

    Hi
    I have a similar error message to the one in this thread
    error loading project
    One day I was using MW and all was fine, the next day it blows up when trying to open a project. We use CVS - is it possible that the NullPointerException would occur if a configuration file had been removed or altered outside of MW (although I have never done this)?
    Where can I look to get more information on what MW is choking on?
    Many thanks
    James

    Don
    Thanks for your help. This occurs with 9.0.4.4
    I have filed a TAR because this now urgent for us (holding up the development team).
    I think that Karen Moore has looked at the problem in the related post and I hope that she gets the chance to look at this too.
    James

  • J2EE configuration Server gives error when creating flex project

    Have eclipse integrated with Tomcat 6 and want to use blazeDS in it. Created Java Project and had setup for BlazeDS. Kept all lib files of blazeDS in it and other configuration things.. I have flex builder plugin in eclipse. Now want to create Flex Project in order to access java methods in it using remoteobject.
    File ->New Flex Project
    Clicked on Next. I am getting error here.
    Java Project location where blazeDS war files and flex folder which inlcudes remote-config file and other config files is "H:\workspace\JavaBlaxeDS\" still giving me error . Please help!!!

    Hi fahad !
    i know this is common problem when u put j2ee.jar from ee sdk to ur local jdk extension ...now wht u have to is ...remove j2ee.jar from ur jdk's extension and restart the system..then simply start jdkee again .. i m sure no error will be waiting for u :)
    Truly,
    siddiquiHashim
    smartSolutions

  • Error while opening the projects in cProjects

    Hi,
        I am encountering a problem while opening the already created projects in cProjects. The error type is
    The following error text was processed in the system DVR : Type conflict when calling a function module.
    The error occurred on the application server and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: IF_DPR_OBL_PROXY~LOAD_OBJECT_LINKS of program CL_DPR_OLR3_EASYDMS===========CP
    Method: IF_CGPL_ASSIGNMENT_PERSISTENCY~FETCH of program CL_DPR_OBL_PERSISTENCY========CP
    Method: LOAD of program CL_CGPL_ASSIGNMENTS===========CP
    Method: LOAD of program CL_CGPL_PROJECTS==============CP
    Method: LOAD of program CL_CGPL_ENTITIES==============CP
    Method: LOAD_PROJECTS of program CL_DPR_APPL_OBJECT_MANAGER====CP
    Method: LOAD_OBJECTS_OF_OBJECT_TYPE of program CL_DPR_BAPI_SERVICES==========CP
    I request you all to help me out solve this issue if you know.
    Regards
    Nachimuthu Ramesh

    Hi Vivek,
       Thanks for responding to my question. I made changes as per your suggestion and now I am not getting the error message whatever I forwarded. But I am getting another error message 'You require authorization to display Project`. Pls help me out to solve this issue.
                   Thanking you
    Regards,
    N.Ramesh

  • General error when opening FCP project file

    Hi, I have searched on the forums and found similar questions, but no solution yet.
    I created a project about a month ago (FCP 5.0.4) and now I need to make some additions but every time I open the file (or all of the 20 autosaved files) I get a general error message. I tried moving the media files to another folder, but I still get the general error message. I have the project file on my local drive and the scratch disk is a My Book drive (I forgot to reformat the drive so it is still Fat32). I have removed the preferences and ran disk first aid already.
    All of my other projects I can open just fine.
    Any suggestions? I need to add about 2 more minutes to the project which is already 18min. It took me a week to edit and I really don't want to re-edit everything.
    I am using FCP 5.0.4 on a PB G4 1.5Ghz

    I don't quite understand - did you move your project files to a FAT 32 formatted HD?
    If so, they're probably cooked . . . (as in wrecked)
    Check to see if they're .fcp and if not, try changing one to that, then try to open it.
    Search this forum for something like FAT 32 or Mac OS Extended - you may glean more accurate info from that.
    Andy
    G5 Quad 8GB. 250, 500 GB HDs. G-Raid 1TB. FCP 5.1.1. Shake 4.1. Sony HVR Z1E   Mac OS X (10.4.7)  
    "I've taught you all I know, and still you know nothing".

  • Multiple errors when opening my project file. Please help!

    Hi Everyone,
    I'm new to the forum and I hope someone can help me with a problem I'm having with opening a specific .aep.
    My project crashed. I tried reopening it, but from then I've been getting the following error messages. While restarting my system or AE usually helps, this time the project wouldn't reopen no matter how I approached this.
    Steps I've taken so far:
    -Restarting my computer.
    -Restarting After Effects
    -Importing the .aep file into AfterEffects
    -Opening the file on a different computer.
    -Trashing preferences and reopening the Project in AfterEffects.
    -Opening one of my 5 at a 15 minute interval generated Auto-save files.
    All result in the same error.
    Please see attached images to see the error I'm getting.
    The final message can't be clicked away and when I click the exit button at the top right of the application the application crashes and prompts me with a default windows error screen.
    Used source footage:
    XDCAM files in a .xmf container
    I really hope someone can help me with this problem. Our deadline was yesterday so any help would be much appreciated
    Thanks in advance,
    Lars
    Some information about my system:
    After Effects CC (version 12.0) with all recent updates from the cloud as of 21th of august
    Windows 7 Professional
    Service Pack 1
    Dell Precision T3500
    Intel(R) Xeon(R) CPU W3550 @ 3.07Ghz 3.07Ghz
    8 GB RAM
    64-bit operating system
    Wacom Intuos 4 large pen tablet
    QuickTime 7.7.4

    Solved!! I moved the two plug-ins that were giving me an error and tried to reopen the project. This time I could reopen it.
    Saving the file under a different name now worked and I could continue working on the project. However the composition containing the rotoscoped footage got lost in the process. I just redid this part and rendered the rotoscoped footage as a separate RGBA quicktime to prevent the same thing from happening.
    So happy 50 hours of work were still alive
    Hope this helps anyone experiencing the same problem.

  • TopLink mapping errors on opening BPEL project in JDeveloper

    Hi,
    New to BPEL, and have just got back from the SOA course.
    I would appreciate some assistance in resolving the following type of error that appears when I start Jdeveloper and click on a particular BPEL project. I received the project in a ZIP file, which I then added to an existing (empty) application:
    "There was a problem encountered loading the TopLink Mappings
    project:<br>file:/D:/POMV/AltaFacilidadenRed/toplink/ModeloDatos/ModeloDatos.mwp"
    I have checked the directory mentioned, and the file is not present, nor was it present in the oiginal ZIP file.
    There are several other such errors, some of which I can tell are from typos, for example "borrraCustomer". In this example, I can see references to it in the .jpr file, as well as a single reference to it in the .bpel file:
    xmlns:ns31="http://xmlns.oracle.com/pcbpel/adapter/db/BorrraCustomerServices/"
    How do I go about resolving these errors - Can it be done within Jdeveloper, or do I need to edit files.
    Regards - Anit

    Hi,
    Did some digging around, and found a previous posting on a db adapter related issue which advised deleting from the project jpr file the offending entries in the following areas:
    <hash n="topLinkGenerateStatusReport">
    <hash n="topLinkMapsLocations">
    <hash n="topLinkQualifyTableNames">
    Did this, and now the project opens without errors.
    Anit

  • Weblogic 6.1 - Server port Error

    Hi..
    We are running Weblogic 6.1 server on 7001 port and also implemented JDBC connection pooling.
    but we find below error ...in between ...
    <Oct 20, 2004 11:39:54 AM IST> <Critical> <WebLogicServer> <Failed to listen on port 7001, failure count: 76, failing for 1,098,251,887 seconds, java.net.BindException: Address already in use>
    <Oct 20, 2004 11:39:54 AM IST> <Critical> <WebLogicServer> <Attempting to close and reopen the server socket on port 7001>
    <Oct 20, 2004 11:40:04 AM IST> <Notice> <WebLogicServer> <Reopening listen socket on port 7001>
    <Oct 20, 2004 11:40:04 AM IST> <Critical> <WebLogicServer> <Failed to listen on port 7001, failure count: 77, failing for 1,098,251,887 seconds, java.net.BindException: Address already in use>
    can any one suggest ...why thsi happing..
    thanks

    yes we are running on unix ..
    we are running 2 weblogic instances but on different port...
    one on 7001 and other on 7003 ...
    and if one background process already running on 7001 ..then i think it is impossible for OS to assign this port to weblogic instance..
    but we are facing problem in this way...that we start weblogic server ..it stared.and works ...for few hours..
    and in between ...we find below error ...
    <Oct 21, 2004 11:22:13 AM IST> <Notice> <WebLogicServer> <Reopening listen socket on port 7001>
    <Oct 21, 2004 11:22:13 AM IST> <Critical> <WebLogicServer> <Failed to listen on port 7001, failure count: 64, failing for 1,098,337,347 seconds, java.net.BindException: Address already in use>
    this error is not coming when we are starting weblogic server ...it is coming when weblogic server is running ...on port 7001...
    i hope you get my point ...what is happing...
    thanks..

Maybe you are looking for