VI taking time to load first time

why My VI is taking so much (at least 4 minute) time to load not to run?

smercurio_fc wrote:
If you want real help, provide real information.
Like what your VI is doing.
What toolkits you are using.
What operating system you are using.
What version of LabVIEW you are using.
Whether you have any controls or indicators with saved data, like graphs.
...a few more...
What LabVIEW version is the VI? Is it the same as the version you are using.
Are all subVIs in the expected locations or does is constantly search when loading?
Was the VI last saved on a different platform (Mac, Linux, 64bit windows, non-sse2, etc.)
Are you using LabVIEW 2011 on an computer that does not support sse2 (e.g. athlon XP, pre-pentium 4)?
Does your VI use mathscript?
How much free memory does your computer have?
Are the VIs and subVIs local or on a network location?
Are you using addons (openg, toolkits, etc.) that are not masscompiled?
What else is running on your computer?
Do you have large folded structures that need to be computed at compile time?
Is your VI set to seperate compiled code?
Do most VIs (e.g. examples from the example finder) load much faster?
If most of the questions don't apply and you think it should load much faster, please attach your VI. 
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • My iPhone 4S is dark, this is the second time.  The first time i was able to get it back on by plugging in into my PC.  However this time i have had it plugged in for an hour or so and nothing.  I have done the Start/sleep buttons

    My iPhone 4s is dark, this is the second time.  The first time I was able to get it back up and running by plugging it into my PC.  However this time it has been plugged in for an hour or more and nothing. There was still at least 70% charge left on it when it went dead.  I have pressed the sleep and start button separately and together.  It said that I did not have much space left this morning so I deleted Apps and photos but there was still space.  Just two days ago it was losing power even though it still 55% charge left so I plugged it in and it seemed to gain power.  Any suggestions on the problem?

    Sounds like faulty battery. Make Genius reservation and take to Apple for quick (minutes) free battery diagnostic testing. If you have Warranty or AppleCare the problem will be covered.

  • Flash file not loading first time but loads on refresh

    I have a problem where a flash program is not loading when
    the webpage is first visited, it will get stuck on the loading
    screen. Now for this file to finish loading, it needs to load in
    another file. Once that file is done loading then the program will
    continue. But like I said the first time the program gets stuck on
    the loading screen and never continues. If you hit refresh in the
    browser then the program will continue past the loading screen.
    I've checked the code and everything seems fine there. Could
    this be a security issue? The two files are on the same domain. Or
    if anyone has any insight into this problem, it would be
    appreciated.

    "Dusarn" <[email protected]> wrote in
    message news:e3b9i7$qup$[email protected]..
    >I have a problem where a flash program is not loading
    when the webpage is first
    > visited, it will get stuck on the loading screen. Now
    for this file to finish
    > loading, it needs to load in another file. Once that
    file is done loading then
    > the program will continue. But like I said the first
    time the program gets
    > stuck on the loading screen and never continues. If you
    hit refresh in the
    > browser then the program will continue past the loading
    screen.
    >
    > I've checked the code and everything seems fine there.
    Could this be a
    > security issue? The two files are on the same domain. Or
    if anyone has any
    > insight into this problem, it would be appreciated.
    That is almost always caused by a faulty preloader code. Post
    your preloader code or a link to the website so it can be checked.
    tralfaz

  • Edge animation fails to load first time in Opera, Crome  but work in Firefox and Safari, both localy and

    Hi guys, I have quite a serous problem here, I have a Adobe Edge Animation (done in CC) that fails to load the first time in Opera and Crome but does work in Firefox and Safari. It fail to load every time coming from another page.
    The problem persist both locally and online. It does work in preview every single time.
    I you can push me in the right direction, that would be great.
    Thanks!
    Here you can see the animation:
    http://tierraburritos.com/test/laCarta.html

    It seems to because of a style insertion error in animate library/content
    Is it possible for you to share/mail your files with us,we can isolate the issue.

  • JSFF CSS not loading first time

    Hi everyone,
    My JSFF refers to a CSS when the jsff starts the first time it doesn't show any styles but when I press F5 the styles are shown
    this is my jsff
    <ui:composition xmlns:ui="http://java.sun.com/jsf/facelets" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
                    xmlns:f="http://java.sun.com/jsf/core">
        <af:resource type="css" source="/recursos/css/utiles.css"/>
    ...etc...QUESTION 2:
    Is there a way to set a hint for an <af:inputtext> ??
    just like there is in amx for web mobile? HINT TEXT ?
    THANKS!!!

    Sorry for the late response,
    Yes is inside the public_html, because I have my css and js inside a folder in the webcontent
    when my jsff loads no styles or js behavior loaded, then I press F5 and the styles are shown and what the javascript does also y noted
    here is my code.
    <?xml version='1.0' encoding='UTF-8'?>
    <ui:composition xmlns:ui="http://java.sun.com/jsf/facelets"
                    xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
                    xmlns:f="http://java.sun.com/jsf/core"
                    xmlns:adfsilat="/webapp/untitled1.taglib">
                    <af:resource type="css" source="/recursos/css/utiles.css"/>
                    <af:resource type="javascript" source="/recursos/js/tagscript.js"/>
    ...

  • Inputtext component refreshes and the entered data is vanishes only happen when page loads first time

    Hi,
    Am using 11.1.1.5 adf jdev.
    I got unique issue , i have couple of jsff seach pages . In jsff , i have user enterable inputtext box ,Issue is when user enters data for first time . the component refreshes and the entered data is vanishes .
    But it happen for the first time when page loads, There is no partial triggers on dat input text box.

    Hi John,
    My page is not a part of a task flow. The whole app is an Admin app comprising of multiple individual pages navigated using Menu.
    I have tried to run this page individually on my local machine as well as when deployed on the WLS server. The behavior is the same.
    Kindly advice,
    Thanks,
    Ram

  • Crystal report from MSC taking long time for the first time

    Hello Friends,
    I have a report designed in Crystal Reports to display the BP details. It is giving some performance issues. In the analysis it is found that it is taking long time immediately after i restart the machine. From the next time it is not that worse.
    If anybody is facing the same performance issue while using the crystal reports, kindly let me know the reasons for this. I would like to know the ways to increse the performance.
    Thanks for all your support.
    Best regards,
    Swarna Seeta

    Hello Swarna
    Reporting is quiet a heavy component which interacts with many other dlls.
    What happens when you say generate report from the mobile application for the first time, UI Framework knows that it is a reporting call and it will instantiate Reporting Manager. Reporting Manager is the single point of contact for the entire reporting functionality. During the initialization of reporting manager,
    it needs to instantiate all other working components like Error Hanlder, Data handler, Resoure component and crystal reports etc..Resource component is a COM component and so there will be lot of Marshallign/Unmanrshalling from Dotnet calls. Since all these sub components are singleton classes, initialized only once for the first time and reuse the same instance in the subsequent attempts.
    Hope I had made it bit clear
    Best Regards
    Shankar

  • AppsLocalLogin.jsp slow to load first time

    When logging into EBS 11.5.10.2 for the first time (for any given user), the AppsLocalLogin.jsp page takes anywhere from 5 to 15 seconds to load. Subsequent logins are nearly instantaneous.
    This behavior leads me to think it's being cached somewhere, whether in the database or on the PC. Is there a way to pre-load it into the cache, to speed up that initial login? Or is there something else going on here that is causing the slow initial load?
    Thanks,
    Lori

    As part of the server startup, similar to Hussein mentioned, do a:
    wget http://<hostname>.<domainname>:<port>/OA_HTML/AppsLocalLogin.jsp?username=<username>
    or similar for your O/S.Thanks, I'm experimenting with this.
    Or go one step further and script the user/password form submit for a given user.Any tips on how to go about this?
    PS. I have to ask, how often are you restarting your instance? Since the issue is only the first time the first user logs on, I
    woudn't have thought it would be a problem? Or is there something we are missing.We bounce our forms tier nightly at 3 am, so it tends to be an issue for users first thing in the morning. The reason I'm investigating now, though, is because we will soon be deploying a DMZ tier for self service HR, and expect to have more users who don't log in frequently. It's more for "appearances" sake - i.e., we don't want users to log in once to view their paystub, and be frustrated because the one and only time they log in, it takes so long.

  • Gnome 2.28 won't load first time

    hi,
    I'm experiencing a strange problem as I investigate trying to have a working Gnome on my Arch.
    I boot in gdm through inittab, and when i login for first time, desktop seem to load but gnome-panel not, and top shows activity of dbus and gvfs (maybe looping as I reported in older posts).
    Then I kill gnome-session, back to gdm, login again and voila, it works.
    Any idea? I'm stuck on this since weeks...
    Last edited by lafayette (2010-05-14 18:54:04)

    Sorry, I got badly confused, I'm using Gnome 2.30 (with 2.28 I hadn't any problems). I just ran a "pacman -Syu", just in case.
    $ cat /etc/inittab
    # /etc/inittab
    # Runlevels:
    # 0 Halt
    # 1(S) Single-user
    # 2 Not used
    # 3 Multi-user
    # 4 Not used
    # 5 X11
    # 6 Reboot
    ## Only one of the following two lines can be uncommented!
    id:5:initdefault:
    rc::sysinit:/etc/rc.sysinit
    rs:S1:wait:/etc/rc.single
    rm:2345:wait:/etc/rc.multi
    rh:06:wait:/etc/rc.shutdown
    su:S:wait:/sbin/sulogin -p
    # -8 options fixes umlauts problem on login
    c1:2345:respawn:/sbin/agetty -8 38400 tty1 linux
    c2:2345:respawn:/sbin/agetty -8 38400 tty2 linux
    c3:2345:respawn:/sbin/agetty -8 38400 tty3 linux
    c4:2345:respawn:/sbin/agetty -8 38400 tty4 linux
    c5:2345:respawn:/sbin/agetty -8 38400 tty5 linux
    c6:2345:respawn:/sbin/agetty -8 38400 tty6 linux
    ca::ctrlaltdel:/sbin/shutdown -t3 -r now
    # Example lines for starting a login manager
    #x:5:respawn:/usr/bin/xdm -nodaemon
    x:5:respawn:/usr/sbin/gdm -nodaemon
    #x:5:respawn:/usr/bin/kdm -nodaemon
    #x:5:respawn:/usr/bin/slim >& /dev/null
    # End of file
    It's getting even harder to log into Gnome, as system often freezes while in gdm login screen. I'd tend to exclude hw problems, livecds of other distros and memory tests did not report any problem.
    MODs: title of topic can be updated to Gnome 2.30?

  • Taking action only the first time an event executes

    I want a certain action to occur only the first time an event handler for a button is called. Is there a simple way to do this?
    Bill F

    There are two pretty easy ways to do this.
    If you want to continue to trap other events (other event cases in your event structure), use a shift register:
    1. Add a shift register to the loop containing your event structure. (right-click on the left-hand border of your loop and select Add Shift Register).
    2. Wire a numeric constant = 0 from outside the loop to the input (left-hand) terminal of your shift register.
    3. Inside your event structure, in the event case you want to handle only once, put a case structure around the code you want to execute only once. That code should be within the True case.
    4. Add an Equal To 0? function (from the comparison palette) to the loop. Wire the input shift register to the input of Equal To 0?. Wire the output of Equal To 0? t
    o the selctor for your new case.
    5. Within the True case of your new case structure, add a numeric constant = 1. Wire that constant out to the output (right-hand) side of your shift register.
    6. Within the False case of your new case structure, wire the input side of your shift register to the output tunnel created by the wiring in step 5.
    This way the event structure will keep running and handling other events, but the case you just modified will only run the first time: the first time you get the event, the shift register will = 0 so you'll execute the True case of your new case structure. Within that case, you set the shift register to 1. The next time you get that event, the shift register = 1, not 0, so you'll execute the False case and not the code in your True case.
    If you want to stop all event handling after the first event and your event handler is the only thing with its loop, from the event case (for the event you want to stop on), wire a True boolean constant out to
    the Stop terminal of the loop containing your event structure.

  • Select statement is taking lot of time for the first time Execution.?

    Hi Experts,
    I am facing the following issue. I am using one select statement to retrieve all the contracts from the table CACS_CTRTBU according to FOR ALL ENTRIES restriction.
    if p_lt_zcacs[] is not initial.
    SELECT
               appl ctrtbu_id version gpart
               busi_begin busi_end tech_begin tech_end
               flg_cancel_obj flg_cancel_vers int_title
             FROM cacs_ctrtbu INTO TABLE lt_cacs FOR ALL ENTRIES IN p_lt_zcacs
                                                    WHERE
                                                    appl EQ gv_appl
                                                    AND ctrtbu_id EQ p_lt_zcacs-ctrtbu_id
                                                    AND  ( flg_cancel_vers EQ '' OR version EQ '000000' )
                                                    AND flg_cancel_obj EQ ''
                                                    AND busi_begin LE p_busbegin
                                                    AND busi_end GT p_busbegin.
    endif.
    The WHERE condition is in order with the available Index. The index has  APPL,CTRTBU_ID,FLG_CANCEL_VERS and FLG_CANCEL_OBJ.
    The technical settings of table CACS_CTRTBU says that the "Buffering is not allowed"
    Now the problem is , for the first time execution of this select statement, with 1.5 lakh entries in P_LT_ZCACS table, the select statement takes 3 minutes.
    If I execute this select statement again, in another run with Exactly the same parameter values and number of entries in P_LT_ZCACS ( i.e 1.5 lakh entries), it gets executed in 3-4 seconds.
    What can be the issue in this case? Why first execution takes longer time?.. Or is there any way to modify the Select statemnt to get better performance.
    Thanks in advance
    Sreejith A P

    Hi,
    >
    sree jith wrote:
    > What can be the issue in this case? Why first execution takes longer time?..
    > Sreejith A P
    Sounds like caching or buffering in some layer down the i/o stack. Your first execution
    seems to do the "physical I/O" where your following executions can use the caches / buffers
    that are filled by your first exectution.
    >
    sree jith wrote:
    > Or is there any way to modify the Select statemnt to get better performance.
    > Sreejith A P
    If modifying your SELECTS statement or your indexes could help depends on your access details:
    does your internal table P_LT_ZCACS  contain duplicates?
    how do your indexes look like?
    how does your execution plan look like?
    what are your execution figures in ST05 - Statement Summary?
    (nr. of executions, records in total, total time, time per execuiton,  records per execution, time per record,...)
    Kind regards,
    Hermann

  • Backing up macbook with time machine for first time

    I tried backing up my macbook for the first time, using time machine, to a new portable external hard drive formatted for p.c. The screen said do you want to erase the disc and i did. It said nothing about formatting for mac, but began to appear to be backing up my computer, and was running for 3-4 hours doing that. I walked away from the computer and came back an hour or two later, and there was a message on the screen saying error, could not create directory. I don't know if this was related to the initial backup, or if an hour later it tried updating the backup and it referred to that. How do I know if my computer is backed up properly. What do I do about the message about the directory. If I don't need this program to update the backup every hour, how do I change that. Also, I have a 1 terrabyte external hard drive on which I store all my raw photography files, can I plug that in and plug in another new external hard drive and back up the external hard drive to the other external hard drive using time machine as well? thanks for any suggestions, this is a little confusing the first time, Virginia

    The backup frequency can be changed using e.g. TimeMachineScheduler and I think you can set Time Machine to backup external drives. (System Preferences --> Time Machine --> Options)

  • Trying to back up with time machine for first time. It keeps ejecting the disk a few minutes in. Any ideas?

    I am using a WD My Passport to try and do a time machine backup for the first time, on my iMac desktop.
    the first couopleo of times I did it, it was really slow and then crashed after a few mins. I started again as if it was a new external harddrive and some home it tarted a bit faster, getitng to aboyt 6GB of the 280GB within 10 mins and then crashed again. All I see is that it is no longer working and a message pops up saying 'Disk was not ejected properly', even though I havent touched it.
    Am I doing soemthing wrong or have I got a dodgy external disk?
    Help

    Time Machine Troubleshooting
    Time Machine Troubleshooting Problems

  • How do we tune a query that takes more time for the first time?

    Hi,
    First time it takes 20 secs and subsequent times 2 secs.
    Let me know if you need more info
    Thanks

    Following are the parameters set at the DB level.
    .__db_cache_size=2214592512
    .__java_pool_size=16777216
    .__large_pool_size=16777216
    .__shared_pool_size=1543503872
    .__streams_pool_size=33554432
    *._optimizer_cost_based_transformation='off'
    *._smu_debug_mode=4
    *.compatible='10.2.0.1.0'
    *.cursor_sharing='SIMILAR'
    *.db_block_size=8192
    *.db_domain=''
    *.db_file_multiblock_read_count=16
    *.job_queue_processes=10
    *.open_cursors=5000
    *.optimizer_mode='ALL_ROWS'
    *.pga_aggregate_target=1277165568
    *.processes=250
    *.remote_login_passwordfile='EXCLUSIVE'
    *.sessions=1000
    *.sga_target=3833593856
    *.undo_management='AUTO'
    *.undo_tablespace='UBPTAB_UNDO'
    Execution Plan
    Plan hash value: 2107556093
    | Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
    | 0 | SELECT STATEMENT | | 45157 | 29M| | 9094 (1)| 00:01
    :50 |
    | 1 | SORT ORDER BY | | 45157 | 29M| 78M| 9094 (1)| 00:01
    :50 |
    |* 2 | TABLE ACCESS FULL| <tname>| 45157 | 29M| | 2564 (2)| 00:00
    :31 |
    Following are result from dba_tab_statistics.
    NUM_ROWS BLOCKS EMPTY_BLOCKS AVG_CACHE_HIT_RATIO AVG_ROW_LEN
    112704 11520 768 685
    AVG_SPACE_FREELIST_BLOCKS NUM_FREELIST_BLOCKS
    0 0
    Follwing was the time it has taken to generate the explain plan report after issuing the below command.
    set autotrace traceonly
    Elapsed: 00:00:15.49
    Following is the statistics
    Statistics
    0 recursive calls
    0 db block gets
    11380 consistent gets
    0 physical reads
    0 redo size
    8823636 bytes sent via SQL*Net to client
    37731 bytes received via SQL*Net from client
    3019 SQL*Net roundtrips to/from client
    1 sorts (memory)
    0 sorts (disk)
    45267 rows processed
    Pl let us know how to tune the same.
    Thank you all for the help

  • HTML view does not load first time?

    All,
    I have two HTML views on my Visual Composer model which both have 'Start' connectors going into them with the URL's defined (and correct), but when the page first loads the HTML views just show as gray boxes.
    To get the HTML views to display the user needs to refresh the page then they appear!?
    Has anyone also experienced this? If so how did you resolve this problem, because this is unacceptable to the user?
    Thanks
    Conrad

    Hi Antonio,
    thanks for your reply.
    The problem that we seem to be having now is that 90% of the time the html views load but some times they don't, they just remain as gray boxes.
    I tried the simple demo that you suggested and it worked for me also, but as i said the problem only sometimes occurs.
    It maybe as you said a problem because i have lots of epcm events flying about and JavaScripts.
    I will try and get a consistent failure, take it from there and keep you posted.
    Thanks
    Conrad

Maybe you are looking for