Via 4 in 1?

Can someone be specific as to why I would need the Via 4 in 1 drivers. Will my system improve its scores in 3Dmarks (see specs)? I am not really sure if they are the cats meow why they weren't included. What exactly will it change for me? I think I understand that the agp slot is only running at pci speed. But everything I see says I am running at 8x agp.

simply put chipset are vital parts of the motherboard, they are the processor bus interface,i/o contollers,etc and you need these drivers for the via chips to work at there best, agp especcially.

Similar Messages

Unable to capture audio from BlackMagic HD Extreme via Voice Over tool

Hi !
I'm trying to capture audio via my BlackMagic HD Extrem card using the Voice Over tool in FCP6, but I can't, no audio is incoming.
I can ingest audio with video using log and capture, then I know my card and my cables are working.
I tried to set the BM card as audio input in my Audio's System Prefereces Pane, but it isn't working either.
I've been looking on the BM website, but I found nothing.
Can you help me ?
Thx

Thanks for the reply.
Looking at system preferences I found that audio input was set microphone. Don't know how it happened. I switched it to DeckLink and now FCP displays 16 input channels in Log and Capture dialog. I didn't try to capture yet but I think it solved the problem, because before I had only two channels displyed.

Unable to capture via Blackmagic UltraStudio Express

Hi,
I'm having trouble capturing into Premiere Pro via UltraStudio Express.
I have a macbook pro 15” retina, Adobe Premiere Pro CC 2014, Desktop Video 10.1.4 (installed after PP), Ultrastudio Express, Ultrastudio Mini Monitor, Media Express, DaVinci Resolve 11 Lite.
I can capture from a camera via SDI into Media Express.
I can use LiveView and get monitor output with Resolve.
In Premiere Pro preferences, Device Control I can see 'Blackmagic Device Control'.
But I can't get any capture in Premiere Pro. Following the directions in Desktop Video Manual February 2014, as I setup a new project in Premiere Pro, I click on ‘Settings’ under ‘capture’, but get no feedback. If I proceed into a project, go to capture, I see no video from the connected camera.
Any advice would be wonderful. I’m trying to use this system for a green screen shoot on Monday.
Herb

To my knowledge, if CC is up to date, it's up to date. I checked and there are no updates. Thanks.

HT201272 There is no mention here of audiobooks bought via iTunes. My previous purchases do not show up when I hit the "purchased" button, only music - help!

I am trying to re-download, via iCloud, a previously purchased audiobook, but all the records of audiobooks i previously purchased seem to have been wiped from my purchase history, and no mention of auto downloads for audiobooks appears anywhere. Can anyone shed light on this anomaly?

Audiobooks are currently a one-time only download, so they won't appear in the cloud for re-downloading. Have you not still got a copy of them that you can sync to your phone e.g. on your computer and/or on a backup ?

External preview display via. Mini-DVI to video adapter QUESTION

Hello, I have been browsing this forum for a while, and this is my first question.
I have a Macbook Core2duo running Final Cut Pro. I purchased a Mini-DVI to S-video/composite video adapter.
I cannot get my work to preview on this external monitor. I would like to view the canvas on the monitor while working. I had this setup at school on a G5, but I cannot get it to work on my macbook. The only way apple suggests doing this is by setting up a camera via. firewire and then run from the camera to the NTSC video display (television). I would just like to do it via. mini-dvi to my television for previewing.
Any help is greatly appreciated. Thank you,
Morgan Bressler

From what I've been told, using the computer's video output isn't outputting a true NTSC picture. I was told when talking about how the Macbook Pros dropped the S-vdieo port that I shouldn't use that anyways, but rather to go the firewire route. THat was actually converts the video source to true NTSC instead of taking a computer output to a TV. While I have no doubt that it works, I'm willing to bet that you'll see a noticeable difference between the G5 S-video and your MB using firewire. Most consumer camcorders from the past several years do digital (firewire) to analogue (NTSC) conversion, so you probably don't even need a new box.
-Brian

No signal via DVI to VGA adapter on my video projector Sharp PGM 15X

Hi there!
I have a big problem with my video projector. It´s connected via mini DVI to VGA adapter to
the projector. The problem is, Mac OSX decect the projector but there is no picture.
To resize the solution on both, or one of them doesn´t help.
When I use my Bootcamp and reboot with Windows XP there is a picture on the video projector.
I cant believe this.
What should I do to fix this problem?

I got my Mac Mini yesterday and I am having the exact same problem as you are having.
I've tried on two different TV's but it is just not sending a signal. Is it faulty?

Using Mini DisplayPort to VGA Adapter to connect Macbook Pro (2009) for a presentation via projector.

When I connect my Macbook Pro (2009 model) using a Mini DisplayPort to VGA adapter to display a presentation via projector, only the top-left portion of what is displayed on my Macbook Pro's screen is displayed on the projector, as though I zoomed in on that portion of my screen. The projector is on and the adapter and the cable that connects the adapter to the projector machine is correctly connected. Any suggestions on how to fix this problem?

Hi glraczon.support,
It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
Here is an article that may help you with that process:
OS X Mountain Lion: About the Display pane of System Preferences
http://support.apple.com/kb/HT5369
Thanks,
Matt M.

I am having an issue regarding a placed order via customer service department

I recently relocated to Anchorage Alaska as part of a permanent change of station per the United States Air Force. I was initially located on the East Coast in the lower 48 and at the time of activating my contract I had purchased two separate Iphone 4 devices. I also recently went in to a store in February to purchase a Nexus 7 as well.
Upon arrival in Anchorage I had multiple issues regarding the Iphone 4 devices including being unable to send and receive text messages & imessages, unable to make phone calls, dropped phone calls, unable to utilize GPS, as well as not being able to access general account information and use anything related to web browsing or data usage. It was determined that because the Iphone 4 operates on the 3g network and Verizon does not have a 3g network in Alaska, as a result I was utilizing an extended service network from another carrier. As a result of this I am only able to use my Iphone 4 devices while connected to my wi-fi network while within my home, which is totally unacceptable.
I was not made aware that I would be dealing with this when I moved to Alaska and inquired as the the use of the devices I currently owned prior to purchasing the tablet. I was assured by three separate store employees one of which being a manager that all devices would function at 100% efficiency including the Iphone 4s. In fact I was recently billed 350$ for roaming charges last month, which prompted me to speak with a representative via the online chat regarding the significant increase she said that she was unable to process any sort of credit to the account regardless of what I had been told at a local Verizon store where I purchased the tablet.
As a result of all of these mishaps since arriving here in Alaska I determined I was in need of newer devices that utilize the 4G LTE network currently provided by Verizon in Alaska. I know for a fact that the 4G LTE works great up here because my Nexus 7 tablet runs flawlessly and does not incur roaming charges when utilizing the 4G LTE network.
Yesterday I attempted to contact Verizon through the live chat feature regarding upgrading two of the devices on my account. The live chat representative immediately asked me when my upgrade date was. Upon telling her my upgrade date 9/29/2014 she told me I should contact the customer service department as I might be eligible for an early upgrade. I then proceeded to contact the customer service department using my Iphone 4.
My attempt to speak to anyone in the customer service department resulted in a merry-go-round of being put on hold 6 separate times by two different employees, both of which had me wait for more than an hour while they attempted to speak to a manager to gain approval for an early upgrade. The first rep seemed almost sure she would be able to have my devices upgraded early especially considering the issues I was having regarding service.
The second rep seemed newer and was very dodgy about my questions and was very unwilling to help at first. He even mentioned that I had been a Verizon customer for almost two years, had never missed a single payment and had outstanding account history which should have garnered some sort of importance to the level of my request. But I digress, during this time I was disconnected from the call twice from each separate representative.
Both reps assured me they would call me back, I never did get a call back from either one of those reps and I was becoming very frustrated having waited four hours trying to find some sort of solution to my current predicament.
After waiting an hour for the second representative to call back I grew impatient and contacted the customer service department, was put on hold again, and finally reached a third customer service representative who was able to provide a solution for me.
I explained everything I had been dealing with to Cory ID # V0PAC61, both regarding the phones, the issue of the level of service I was receiving, the dire need for working devices and the multiple times I had been disconnected. I explained to him as a result of these issues I was certainly considering switching to a different provider, a local provider even who could provide me the adequate service that I require for my mobile devices.
I explained to Cory that I had been with Verizon for almost two years, and I had been on a relatives account prior to owning my own Verizon account and had never received this kind of treatment when trying to work towards a simple solution. Cory proceeded to tell me he needed to put me on hold to see if there was anything that could be done regarding the upgrades of the device considering all of the trouble I had been dealing with.
After Cory reconnected with me in the phone call he was able to successfully reach a solution by allowing me to upgrade my devices. We conversed about the options available and I eventually decided to upgrade both Iphone 4 devices to Moto X devices as we determined those would be sufficient for my needs while in Alaska. I also proceeded to add two Otter Box Defender cases to the order so that the devices would have sufficient protection. Cory inquired as to whether or not I would like to purchase insurance for the phones as well and I opted for the $5.00 monthly insurance which including damage and water protection.
Cory explained to me the grand total for the devices which included an activation fee of $35.00 for each device, $49.99 for each Otter Box case, and an additional $50.00 for each device which would be refunded as a rebate upon receipt of the devices and activation, a rebate that I would be required to submit. Cory explained to me that the devices would most likely arrive Tuesday of 6/17 and no later than Wednesday 6/18.
Cory took my shipping information and told me everything was all set and the only thing left to do was to transfer me to the automated service so that I could accept the 2 year agreement for both devices. I thanked him very much, took his name and ID# so that I might leave positive feedback about his exemplary customer service and was then transferred to the automated service.
Once transferred to the automated service I was then prompted to enter both telephone numbers for the devices that would be upgraded, I was then required to accept the new 2 year agreement for both devices and after doing so I was required to end the call. I did so in an orderly fashion and expected a confirmation # to arrive in my email regarding the placed order.
I have never received a confirmation email. I decided to sleep on it and assumed a confirmation email would be sent sometime tomorrow. Nothing has since been received however. I woke up early this morning around 6AM Alaska time to speak to another live chat representative, Bryan, in the billing department who assured me the order was currently processing and verified the order #. I asked him whether or not it was typical for a customer to not receive a confirmation email for an order placed and he said it can sometimes take up to 2-3 business days. He then stated that he had taken note of the issues I was experiencing and told me he would transfer me to the sales department as they would be able to provide more information regarding the shipment of both devices and a confirmation email, as he stated he did not want me to have to wait any longer than necessary to receive said devices.
I was then transferred to Devon in the sales department via the live chat service where I was then required to repeat everything I had said to both Bryan and the other representatives I had spoken too. After a lengthy discussion and repeating everything I have just wrote he told me the order was indeed processing and that he would send a confirmation email in the next 30 minutes.
That was 2 hours ago. It is now 8am Alaska time and I still have not received a confirmation email regarding my order. I was sent an email by Verizon an hour ago stating I had a device to "discover". The email contained no information regarding the shipment of my device, the order confirmation number, or anything regarding my account. The email I received was a typical spam email asking an individual to check out the current available phones and sign up for a new contract.
All I want is a confirmation email to assure that the devices are being sent. I need my phone for work and to communicate with my family in the lower 48. I desperately need to make sure that the device is in fact being sent to the proper address, this is why a confirmation email of the order is so important. I do not care about the shipping speed I just want what I ask to be taken care of for a change. I would hate to sit here unable to determine what the status of my devices are only for the order to be stuck in "processing" limbo and be unable to receive the devices when I was told they would be sent.
I feel I have been given the run around treatment way more than is typically given with any company when an individual is trying to work towards a solution. I have been patient and cordial with everyone I have spoken with, I have not raised my voice or shown stress or anger towards the situation I have only tried my best to work towards a solution with anyone I have spoken too but I am becoming increasingly frustrated with this situation.
Any help regarding this matter would be greatly appreciated. This situation has left a sour taste in my mouth and if the devices were indeed not actually processed in an order, or they were not shipped correctly, or in fact if the order had never existed at all it will only deter me from keeping my Verizon account active and affect my decision to switch to another provider.

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Direct Print smartform to printer via JOB_OPEN function and using SUBMIT

Hello,
I can not able to printout from forms . I can able to get spool number but it is not printing directly to printer (printer Output should come automatic). I am getting error message in SP02 as Status ->Waiting    when i check is showing as "Frontend unavailable".
please find sample code below to test same:
REPORT ZTEST_1                                  .
constants : wc_x type c value 'X'.
DATA: wv_val(1) TYPE c,
      wv_pripar TYPE pri_params,
      wv_arcpar TYPE arc_params,
      wv_lay   TYPE pri_params-paart value 'DINA4',
      wv_lines TYPE pri_params-linct,
      wv_rows TYPE pri_params-linsz.
data: wv_jobname like tbtcjob-jobname.
data: wv_jobcount like tbtcjob-jobcount,
      wv_host like msxxlist-host.
data: begin of ws_starttime.
        include structure tbtcstrt.
data: end of ws_starttime.
data: wv_starttimeimmediate like btch0000-char1 value 'X',
      wv_flag(1),
      WV_DO_PRINT type i.
concatenate sy-tcode+0(4) ' ' 'sample test - print'
into wv_jobname.
*Job open
call function 'JOB_OPEN'
       exporting
            delanfrep        = 'X'
            jobname          = wv_jobname
            sdlstrtdt        = sy-datum
            sdlstrttm        = sy-uzeit
       importing
            jobcount         = wv_jobcount
if sy-subrc eq 0.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
       EXPORTING
            in_archive_parameters = wv_arcpar
            in_parameters          = wv_pripar
            LIST_NAME           = 'JOB NAME'
            LIST_TEXT             = 'test_text'
            RECEIVER             = sy-uname
            IMMEDIATELY           = wc_x
            RELEASE               = wc_x
            USER                 = sy-uname
            layout                 = wv_lay
            no_dialog              = wc_x
       IMPORTING
            out_archive_parameters = wv_arcpar
            out_parameters         = wv_pripar
            valid                  = wv_val
break-point.
wv_pripar-PRSAP = space.
wv_pripar-PRIOT = 1.
wv_pripar-prrec = sy-uname.
if not wv_val is initial.
*call external program and pass data
submit SF_EXAMPLE_01
      USER sy-uname
     via job wv_jobname
     number wv_jobcount
TO SAP-SPOOL
SPOOL PARAMETERS wv_pripar
ARCHIVE PARAMETERS wv_arcpar
WITHOUT SPOOL DYNPRO
AND RETURN.
endif.
*Close job
ws_starttime-sdlstrtdt = sy-datum .
ws_starttime-sdlstrttm = sy-UZEIT.
    ws_starttime-IMSTRTPOS = WC_X .
call function 'JOB_CLOSE'
       exporting
            event_id             = ws_starttime-eventid
            event_param          = ws_starttime-eventparm
            EVENT_PERIODIC       = space
            jobcount             = wv_jobcount
            jobname              = wv_jobname
            laststrtdt           = ws_starttime-laststrtdt
            laststrttm           = ws_starttime-laststrttm
            prddays              = 0                       "set to 0 not repeat
            prdhours             = 0
            prdmins              = 0
            prdmonths            = 0
            prdweeks             = 0
            sdlstrtdt            = ws_starttime-sdlstrtdt
            sdlstrttm            = ws_starttime-sdlstrttm
            strtimmed            = wv_starttimeimmediate
endif.

Hi,
As far as printing to devices not all devices support Bluetooth. Many devices support Bonjour protocal, IPP. The main print port is 9100. Additionally you can see what IO protocols are supported on a product by looking at the EWS (Embedded WebServer) there should be a networking page with that information. Port 9100 is your basic print port and different devices will support different formats (PDF, JPEG, PCL5, PCL6). If there is an API you can find (i am not familiar with J2ME availible calls, then you can use those and send the data to port 9100. Again that is the basic path most printers will accept. not all devices support bonjour not all device support bluetooth etc... Hope that helps and good luck.
I am an HP Employee.

Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go?

Whenever i try and open a social network app it comes up with an error message sayinng "Connect to itunes to use Push Notifications" I have successfully conntected to itunes via phone and computer however this message is still appearing and will not go, therefore i cannot use the apps?HELP PLEASE

http://support.apple.com/kb/TS3281

Problem submitting RFEBKA00 via Job

Hi experts
I have a requirement to create a Z program to upload 3 different files by using RFEBKA00.
For this purpouse, I have created a Z program which creates 3 Z jobs (ZA, ZB, ZC one per file) using JOB_OPEN / SUBMIT program VIA JOB / JOB_CLOSE.
Once every job is finished, I need to read logs using BP_JOBLOG_READ,and if there are no errors, move files to other folder.
My questions are:
1.- When using JOB_OPEN and SUBMIT VIA JOB name NUMBER n, as far as I know n is the number returned by jobcount parameter from JOB_OPEN and should be the same for both jobs (the Zjob created by JOB_OPEN and the one created by program RFEBKA00).When I debbug the program, it is OK, but when accessing table TBTCO sometimes there are 2 different jobcounts. Seems that jobcount is created based on sy-uzeit and sometimes there is some delay between JOB_OPEN and SUBMIT. Is there any way to ensure both jobs have the same jobcount?.
2.- As I need to read the log for each file, and because of the fact that the job created by submitting RFEBKA00 has always the same name, if the answer to my first question is NO, how can I link each of my Z jobs with its corresponding RFEBKA00 job?.
Many thanks in advance for your answers.
BR,
Carlos.

Hi Thomas
Thanks for your answer.
For your first question, there is not BD key problem beacuse of my job is ZJOB and the one created when doing submit via job is RFEBKA00-EXTR.CTA.EL. (standard job) have different names.
But job number should be the same, because I'm using JOB_OPEN (which return the job number in parameter jobcount) and SUBMIT VIA JOB .
For the second question, and based on SAP documentation about SUBMIT , when submitting a program vía job, the submitted program is executed as a background task, which means creating a new job, so the answers is yes, the standard program schedules a new job.

HT204053 Naive question I know but here goes. One apple ID, multiple apple IOS devices (touch/pad/phone). Books purchased via Kindle sync to ALL devices via iCloud. How can I stop this? I want to separate each of the family's reading prefernces from the d

Naive question but here goes.
As a family we have one Apple ID. All devices are synced via my PC and backed up to it rather than to iCloud.
Books purchased via Kindle App appear on all the devices within the "cloud" option. How do I separate each reader's prefernce to their own device? I want to make sure that the younger one's dont have access to anything unsuitable.
Thanks.

You can have one AppleID for your purchases so that all teh devices can use all the apps without having to buy them again, and at the same time, have different iCloud accounts for each user so that their content is not intermingled with everyone else's. You can even go so far as to have your iCloud Account enabled for "Find my iPhone" for each of the other devices allowing you to keep track of where tehy are when they get misplaced.
If you need/want, you can share iCloud Calendars between different iCloud accounts as well. This is exactly what my wife & I have done. We share calendars so I know when she has classes or dog competitions, and she can see my work schedule so she knows what nights I have to be in late, etc.

How to manage one iTunes folder from multiple computers via a network?

Hi there,
The Setup: I have a macbook air, my partner has a macbook pro, we both have iPhones with our own iCloud accounts. There is an apple TV and an Airport Extreme with an external USB HDD in there too (which could potentially be plugged into the ATV via ethernet if need be).
What I want to be able to do:
     1 - NOT have to store the music on my MBA
     2 - Still be able to add music to/alter playlists and movies in the iTunes library that my MBA uses, from my MBA (ie if I end up with new music or movies on           the MBA I need a way to transfer it easily, -keeping in mind that not all the video will fit on the MBP HDD)
     3 - Use the one iTunes music folder for both the MBA and the MBP (to avoid having to update both)
     4 - Sync my iPhone with my iCloud email and contacts etc...
     5 - Sync my partners iCloud with her own email and contacts etc...
     6 - Sync music from the 'common' iTunes folder to either iPhone
     7 - Use apps from my iTunesstore account on my both iPhones
     8 - Stream video from the 'common' iTunes folder to the ATV in HD
Can someone please tell me how I make ALL of the above possible?
Things i'm not sure of are:
     A- Where do I put my iTunes music folder? -Locally on the MBP, or on the External HDD in the airport Extreme?
     B- Which of the above would iTunes match help with?
     C- Would homesharing be used?
     D- What usernames/accounts do I have to put into the iPhones adn where? (itunes or icloud etc...)
For some reason I just can't get my head around how this setup will work.
Thanks in advance!

I'm sort of in the same boat. We've got an iMac with separate User Accounts set up and are currently sharing the same iTunes and iPhoto libraries along with streaming them to our Apple TV.
Right now I'm the only one with an iPod, however she'll be getting one in a couple of weeks.
We also just picked up a MacBook yesterday and I'd like to be able to sync certain libraries like iTunes and iPhoto so that no content gets duplicated on either the iMac or MacBook and so that we both have access to the current libraries for each program on our iPods and AppleTV.
I have an external hard drive that I back up the iMac on and I assume I could manually keep things current with that but there's got to be an easier way...that's why these are Macs right?
Bill

TS3899 How can I block an e-mail address on iPhone 5s? My ISP is unable to help. I can block via Outlook on my laptop, but they still come through on my iPhone

How can I block an e-mail address from sending me spam on my iPhone 5s? My ISP is unable to help. I can block on my laptop via Outlook, but they still come through on my iPhone 5s. Thank you very much.

You can "Move to Junk" and it should start doing it automatically after a few times:
http://blog.mailup.com/2013/09/mail-app-in-ios-7-our-first-tests/

I want to use wifi for Apple TV, but it doesn't prompt for a password, so never connects. What am I missing? Can I only use it via a non-password-protected wifi connection?

I want to use wifi for Apple TV, but it doesn't prompt for a password, so never connects. What am I missing? Can I only use it via a non-password-protected wifi connection?

Hi - you might want to post this question on the Apple TV area - you would probably get a quicker response - if you have a specific question relating to Apple routers then post back here

How can a parent restrict a child's access to a PARENT'S PRE-EXSISTING iTunes account via iCloud's Family Sharing Program?

How can a parent restrict a child's access to a PARENT'S PRE-EXSISTING iTunes account via iCloud's Family Sharing Program? To explain further... I have a young son who is on my iCloud family sharing program... I am excited to be able to share SOME of my music in my iTunes library, but there are some songs and music videos that are not age appropriate for him and currently there is no way to restrict him from viewing and downloading anything off of my iTunes library. Yes, I suppose I can delete the songs he shouldn't have access to, but I don't think I should have to do that... I paid for them and still like them and listen to them while I work out or am without my kids. Is there a way for me to personally select which songs/videos I would like to "hide" from my children in an effort to shield them from inappropriate content?

Hello ggg39,
Welcome to the Apple Support Communities!
I understand that you have some content in your iTunes library that you would like to restrict access for the child set up on Family Sharing with you. To do this, you can set restrictions on the child’s device as described in the attached article.
Family Sharing - Apple Support
Now kids under 13 can have their own Apple IDs. As a parent or legal guardian, the family organizer can create an Apple ID for a child and add the child to the family group automatically. Ask to Buy is turned on by default, and the organizer can also limit the content kids have access to on their devices through Restrictions on an iOS device or parental controls in OS X and iTunes.
For more information on restrictions and how to set them up, please reference the next attached article.
About Restrictions (parental controls) on iPhone, iPad, and iPod touch - Apple Support
Have a great day,
Joe

Via 4 in 1?

Similar Messages

Maybe you are looking for