Via bus master ide drivers for k7t m/board

bought machine second -hand without m/b disk.trying to install 4.1 soundcard but no response.error msg says no drivers in place for via bus master ide.any help?

Hi,
try downloading and installing the chipset driver first if you've not already done it. Saying it need an IDE Bus Master Driver, the sistem seems to search them!
if your MoBo is one of these
• KT266 Pro2-U (Standard Version)
• KT266 Pro2-UL (Onboard Lan Function)
you can try this file
http://download.msi.com.tw/support/dvr_exe/VIAHyperion4in1446vp6.exe
(it cames from the MoBo page in this site:
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=386&MODEL=MS-6593 )
Dario

Similar Messages

VIA bus master ide drivers

hi,
I just installed winXP on an MSI 6368 motherboard, but when Windows load, it keep asking for VIA Bus Master IDE drivers. Those drivers aren't on the CD that came with the motherboard and I'm not seeing IDE drivers listed on MSI website. What should I do?

hi,
I used the VIA 4 in 1 and i'm still having the same problem. Anything else I can try?
Thanks

Portege 30xx Win2K - need bus master IDE driver

Hi!
Cannot find the driver, tried all Toshiba sites. The hard disk works 10 times slower than it should :(
Please help. Thank you.
Best regards,
Vitaly

To test the speed I used Ziff-Davis WinBench99, which is industry standard. ~3MB/s, should be about 30 at the beginning.
I don't know what you mean by "usually" but you can always check what type of driver Windows actually installs. In my case it's "Standard IDE/ESDI controller" and the drive works in PIO mode only. What makes me think that driver is necessary is that there is Toshiba Enhanced IDE Controller driver for Win95, 98 and NT.
There is a small possibility that Win2K Standard IDE/ESDI driver should work in UDMA mode but actually doesn't due to some incompatibility. The drive is Hitachi C4K60. But I'd like it to be confirmed by the one who has such or similar experience.
Thanks anyway.
Regards,
Vitaly

SiS ide drivers for 648max-f

Does anyone use these drivers. Are they useful? I am wondering why Live update doesn't show these drivers. They are on the webpages though.

I think I will try them. You can always rollback drivers, if you want. I am just thinking why they aren't in Live Update. It could mean that they are not useful or compatible with my computer. And in the CD which came with the MOBO it's not on the drivers page but on the utilities (well nowbody uses the CDs anyway). Well they can't do great harm I think. One other thing is that I have noticed that Live Update is not updated as frequently as the MSI webpages.

Where are the USB drivers for my MSI board??

Got a new MSI board- VIA KM266 Pro + 8237 Chipset Based. I installed my new AMD 2300+, WIN XP, etc. I have a USB printer. Got everything installed, printed a test page, and then a document. Everything fine. THEN, I go to use my printer a few days later and it says "Printer not responding". So I troubleshoot, and then go into Device Manager and notice there are no USB devices installed. The new MSI board has 4 USB ports on it. The CD that came with the board has no USB drivers on it (I checked). WIN XP has no USB drivers. What is going on? How do I get the USB ports to work? Am I looking at it all wrong? Appreciate any help out there!

Quote
Stu: He started his thread saying "Got a new MSI board- VIA KM266 Pro + 8237 Chipset Based."
osnavi, that is true. after searching through MSI website, i think this is the board he is referring to, KM3M:
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=611
sonic, what is your USB printer?

Labview Drivers for a PC104 board

I have just purchased the PC104 CPU module from RTD technology:
PCI/104-Express cpuModule™ & Controller
Intel® Core™ 2 Duo 1.20 GHz – 1.86 GHz
http://www.rtd.com/PC104/CM/CMA22/CMA22Mxx.htm
I have installed Windows XP and Labview succesfully.
This board has an embedded advanced analog Input Output board with 8 ports.
The Windows Driver has been succesfully installed. Now i would like to use these ports to acquire analog data using labview. However when i open the DAQmax i can't see it. In the Device Manager of Windows is listed as RTD aAIO and is properly working.
What should i do to use this device with labview?
Attached are the Windows Drivers and some example code for the aAIO in case it helps
Thank you,
Christos
Attachments:
aAIO_windows_v01.00.00.zip ‏3494 KB

Thanks for your response.
I have tried the Call Library Function Node to call a function out of the attached DLL. More specifically i have tried to call "aAIO_General_EnumDevices" but i am not able to retreive any values.
It is the first time that i am using this Call Library Function Node and i am not sure if what i am doing is correct.
I am attaching the vi that i am trying to run and i am also including in the lines below the documentation of necessary functions/parameters/structures.
Thank you,
Christos
aAIO_General_EnumDevices
aAIO_Enum_Info *
Info,
uint8
Limit
Enumerates all aAIO devices in the system.
Parameters:
Info
A pointer to an array of aAIO_Enum_Info structures to fill with information about the aAIO devices in the system.
Limit
The maximum number of aAIO devices to enumerate.
Data Fields
uint32
dev_num
This is the device number which represents this device.
aAIO_Intrfc_Avail
avail
This is the current availability of this device.
uint32
base_addr
This is the base address of this aAIO device.
uint32
irq
This is the IRQ that's been assigned to this aAIO device.
Attachments:
Enumerate device.vi ‏7 KB
aAIOLib.zip ‏51 KB

Solaris 10 x86 - Disabling Bus Master Enable(vgatext)

I am looking for a way to prevent the vgatext driver from setting the Bus Master enable bit for devices claimed by this driver. I can create config file /kernel/drv/vgatext.conf that contains command-preserve=4; This will turn off the setting of this for each VGA card that is not used as the console however the card that does get used as the console is still having the Bus Master Enable bit set by this driver.

I'm getting the same problem trying to install
Solaris 10 in VMware from DVD.
It brings up the Solaris Primary Boot Subsystem, so
it appears to be reading fine, but the only thing
that happens is I get the Cannot find boot.bin
error.Hmm, the "Cannot find boot.bin." message comes from the
CD/DVD's boot code, which is contained in the first 16 sectors
of the media.
The boot.bin file is supposed to be read from the Solaris UFS
slice, which starts at 512 byte block #5151360 (or 2048 byte
dvd sector #1287840). This a byte offset of ~2.6 GBytes.
Maybe an issue with your system's bios not being able to read
DVD media > 2GB, during DVD boot?
Or a problem with burning the DVD media? Maybe some
"smart" PC DVD burning software has decided only to record
the 2.6 GB ISO filesystem, and the 100 MB Solaris UFS
filesystem that follows the ISO filesystem is missing on the DVD?
Or a 2GB filesize issue while burning the DVD?
Do you have a pc / windows utility that can print some information
about the S10 DVD media, especially the size of that DVD?
Maybe your CD/DVD recording software?
The original S10 GA x86 DVD image has a size of 2732195840
bytes, or 1334080 2K DVD blocks.

[SOLVED] K9N SLI V2 - can't find Win XP drivers for on-board LAN

I installed Windows XP, and the driver CD only has Vista drivers. I need drivers for the on-board LAN and the on-board audio. I googled and found some drivers here: http://www.nvidia.com/object/nforc [...] _9.16.html
But when I run setup.exe, the nVidia splash screen comes up briefly, then the "InstallationShield is preparing a wizard to guide you through the installation process" window comes up briefly, and then the window closes and nothing else happens. I found a forum thread where a guy had the same thing happen to him, and there were no replies.
I tried Add Hardware and used the motherboard cd, despite Vista drivers, and the drivers were installed but would not work.
Can anyone help please?
SOLUTION: See my last post. It involves this download: http://www.esnips.com/doc/90c86920-0e33-45df-b9d7-c08c04796421/Fernandos-XP-32bit-NF4-5-non-AHCI-driverpack-WHQL-v2.0

It worked beautifully! Thanks so much. I used the link, downloaded the driver from the first section*, ran setup.exe and the installer worked. But then I had to go to Add Hardware, and something about an SM Bus came up, so I pointed it to the SMBus directory of that download. Then the Add Hardware wizard came up for the Ethernet Controller, so I pointed it toward the Ethernet directory of the download. After that, everything works perfectly.
* Direct download for people with exact problem: http://www.esnips.com/doc/90c86920-0e33-45df-b9d7-c08c04796421/Fernandos-XP-32bit-NF4-5-non-AHCI-driverpack-WHQL-v2.0
Thanks again!

Duplicate IDE drivers

My Mobo: 865GM2-S(MS-6743G) Ver0B
No you are not seeing double, please can someone tell me how to fix this?
Do you know where i can get IDE drivers for my Mobo?

I don't see a problem.
Assaf is correct.
The 865/875 chipsets have 2 IDE channels and 2 SATA channels. If you enable all channels in the Bios, Windows identifies then as 2 primary IDE channels and 2 secondary IDE channels instead of 1st,2nd,3rd,4th like it does in the Bios.
I had hoped SP2 would rectify this but it doesn't.
At any rate, this is "normal" for Windows and your drives should still work properly.
Are you having any performance problems with the drives?

[Athlon64] RS482M4 ATI drivers for XP 64bit won't load

I have downloaded the XP64 bit drivers for the RS482M4 board on MSI and the setup fails on the driver with a message, "inf not found". The box is titled Thunk.exe. It is followed by another message that says failed to update the registry. I have tried this several times and have also tried downloading the drivers for xpress 200 from ATI as well and get the exact same error.
I have a the RS482M4 board with an AMD 64 3500+ processor and Windows XP 64. Currently the system is running with the standard VGA drivers included with Windows. Anything I can do to get the ATI drivers to load? Is this a known issue? Apparently all works fine with the 32 bit version of Windows XP.
Dave

Try unpacking the drivers and run the setup on the unpacked dir, sometimes that happens

Downloaded drivers for the MS6570 do not WORK - HELP!

Hello,
I have a fresh install of Windows XP on the MS6570. I've also downloaded the drivers for the mother board from: http://www.msi.com.tw/program/support/dr...pt_dvr_list.php
and from:
http://ftp://download.nvidia.com/Windows/nForce/5.10/nForce_5.10_WinXP2K_WHQL_english.exe
Unfortunitly, everytime I run the setup program from the downloads, it begin the install process but than immediatly turns off the install, never beginning and finishing the install process. No error messages or anything. I've also just installed SP1 for Win XP from a CD I have thinking this may needed to be installed first, but still had no luck. I truely am thinking the driver downloads for the ms6570 are bad.
Does anyone know of a way that MSI can put working drivers for the ms6570 so they can be downloaded or does anyone know of another site or can provid an FTP to working drivers?? I'm extremely desperate.
I appreciate any info.

I appreciate everyone's reply....
Here is what I have done.
I have installed a NIC on my PC, because my on board ethernet will not detect under Windows. I've also went and downloaded SP2 from Microsoft and installed that with all other critical updates. I downloaded the latest version of direct x 9.0c, and the the ms6570 diver's setup to run under win 2000.
Still the results are the same as described above. The driver software downloaded will not run the complete install process. I've than tried to get Windows to detect and update any hardware drives that it can find from the internet and the only driver it found was for the sound card which now works.
I appear to be with the same problem as originally described, and still feel that the drivers may be corrupted that are offered for download. Again.. I'd be happy to pay for a copy if anyone would be willing to burn me an original driver CD. I know the original driver CD does work as this is what I loaded the drivers for my motherboard in the past with.
Thanks for any help again.

Via Hyperion chipset drivers for K&t266 Pro2 MS 6380

hi all
Having recently re installed XP to new hard drive thought I should update the VIA chipset drivers so have installed 4in1 Hyperion 451v.
Am having some lock up problems transfering files from 1 hard drive to another on the same IDE channel.
Power supply problem identified and new Antec on the way.
Looking for some opions guidance around standard XP drivers vs Via and as this is quite old board should I be using retro Via drivers for stability.
Views, thoughts experience appreciated.

Some kt266 chipsets requires the VIA latency patch.
Fixes file transfer issues, corruption and stability issues.
Improves PCI bus transfer rates and crackling sound issues.
you might want to look into this.

New BETA drivers for TV@nywhere Master

there was a thread somewhere before where someone had found some updated BETA drivers for the MSI TV@nywhere Master card but it seems to have gone now
i've been using them for a while now, and they're very stable, and the picture quality has improved somewhat
they say they are for the Master version of the card, but i think they may work on the Mega PC version, the only difference is the Master has a AM/FM tuner as well
anyone having stability probs in media center III or MSIPVS might want to try them out and see what happens...
i've uploaded them to my webspace, and you can find them here in ZIP format: http://www.ukshazam.com/downloads/8606Master_drv.zip
please note these are BETA drivers and as such MSI won't support them (as if they do anyway
i'll also post this in the Mega PC forum

As I recall when this BETA driver started flying around the forum, they WERE NOT official or unofficial MSI drivers. They were modified by a user from another forum and someone from this forum posted a link to them. THESE ARE IN NO WAY RELATED TO MSI DIRECTLY!! Someone reversed engineered the driver and probly thru extensive testing, via trial and error, was able to clean up the driver to give the result that most have had with them. This doesn't mean that everyone is going to have the same result, which is and has been the reality with any add-on card produced since PC's came out...compatibility issues DO still exist out there and not all systems are going to play in the sandbox well with all add-on cards that are manufactured...something to keep in mind when purchasing new systems...
Furthermore, it's been my experience that proprietary systems (The Pac-10 as I call them...IBM, Dell, Gateway, HP, Compaq, Sony, eMachine, etc...) have more issues than White Box systems when it comes to add-on compatibility. If you don't know this already, most of these companies DO NOT want you to purchase off the shelf items from Best Buy, CompUSA, etc...they want you to have to come back to them for upgrades and add-on devices, at higher than retail prices, and that's where they make the most profit. Sad reality, but true. Case in point: My first retail purchased PC was a Dell XPS Pentium 100, (my prior PC's were purchased from Michael Dell's garage) I wanted to upgrade it to a 4X CDROM drive and Dell had failed to include the snap in side rails for their new innovative case that was tool-less. So I called up Dell support and asked if these rails were available. The CS Rep told me that they were so I asked how much. She asked me if I had bought the upgraded device from Dell and I said no. Then she informed me that they wouldn't sell them to me ($6.00 US) because I hadn't purchased the upgrade device from them. Needless to say I was pissed. This was circa 1995-96.
Anyway, over the years of doing network consulting, I can't tell you the countless times that I've heard this type of thing on the phone from many of the above listed companies...yes, most have gotten better over the years (Like Dell including all of the rails needed inside the case nowadays) but overall they still have the same mindset and it's much more subtle when they design a motherboard that won't play in the sandbox well with retail bought components...*shrugs*
I got tired of playing their game after a while and started building my own systems. I found White Box isn't always better either but for the most part it's been a far cry easier than buying proprietary...
Just my 2 cents here for what it's worth...

I can`t install drivers for Promise IDE on WINXP.

Hi, guys. I have a problem. I can`t install drivers for Promise IDE on WINXP. I `ve got an error "This device cannot start. (Code 10)". In Norton Ghost (DOS) drive on Promise work fine. I can`t install WINXP + SP1 on HDD on Promise controller. After pressing F6 and installing driver i `ve got an error Can`t find drive. BIOS 193 beta. Devices: IBM 120Gb 180GXP on primary master, Seagate 120 SATA 26AS on Third master. CD-ROM and DVD-ROM on secondary channel. Drivers 1.00.1.37 from ASUS and 1.00.1.29 from MSI. No result.
And another one. Why very poor perfomance when copying large files (700Mb). When starting copying speed is 25-27Mb/sec, when finishing 5-8Mb/sec. All drives under NTFS.
PS. Sorry for my bad english.

Quote
Originally posted by Athlon1000
But if you have selected Promise as: SATA in BIOS shouldn't you then use the ulsata.sys driver instead and if you choose Promise as: RAID in BIOS then you should use the f2tx*.sys, or am I way wrong here ?
That's correct
So if I do not misunderstand you, Windows hangs when accessing the drive?
Is it only with this drive, then maybe it's an incompatibility between the controller and the ata electronics of the drive.
Or maybe it's completely broken.. have you tried it on the ICH5 IDE controller?
If it works there you should use this configuration.
I've read about problem with some drives ... take a look into the threads on the top of this board (FAQ etc.).
What I found out yesterday: You can use the Promise in RAID mode and define a RAID0 array with only one single drive. So you could use the Fasttrak driver from MSI, which is up to date.
I haven't tried this solution (one disk in a RAID0 stripe configuration), but I think it should work...
Maybe you give it a try
PS.: Before you switch to RAID mode, you have to change the Promise Driver... but be careful: windows won't boot with the wrong driver - your last chance would be "last known good" then...

I am trying to connect a printer but when the pc searches for the drivers/software it says there are none for this version of lion? 10.8 I have downloaded drivers for the 10.7 version but still cannot get it to accept any ideas?

I have a xerox phaser printer which I want to connect to my mac book but each time it says there is no software to support the version of lion I have!
I have downloaded the software for the 10.7 but that hasnt helped... any ideas?? thanks

You will have to try the xerox website for the latest drivers for Mac OX system you are using
http://www.support.xerox.com/support/engb.html
It may be that your printer is not supported. You do not specify which model you have so unable to help further.

Via bus master ide drivers for k7t m/board

Similar Messages

Maybe you are looking for