Via Floppy 64 bit driver

Hi anyone know where the link is to create the SATA driver for F6 / S for the 64 bit version of Windows please I had it from here before but Can't find it now, the first copy I had got damaged and became corrupt.
Many Thanks

me_AMD Thank's my PC will not see Hds using Promise driver, not sure why.
If I enable SATA in Int Perfs it say's
BIOS not installed during POST
boots to windows CD goes through to F6 S I tell to use Promise, it then faffs around for a while. and tells me I have no Hds tried this on a number of occasions with the same problem, yet not problem with Via, well other than at the moment no floppy 64 bit disk, what gets up my nose is I may have left mobile phone on the disk, learning the hard way what I,,, tell others they must not do.

Similar Messages

Printing problem from 32-bit applications via 64-bit driver on Windows 7 x64

Hello.
We have x64 Windows 7, HP P3005n Printer and latest drivers, MS Office 2007.
Please help resolve problem. Thanks
When we print from MS Office to HP P3005n Printer (we try print to local installed network printer and via network print server) we have windows error:
Faulting application name: splwow64.exe, version: 6.1.7600.16385, time stamp: 0x4a5bd3ca
Faulting module name: hpc6r107.dll, version: 0.3.1544.8232, time stamp: 0x4c6af57c
Exception code: 0xc0000005
Fault offset: 0x0000000000076e77
Faulting process id: 0xe68
Faulting application start time: 0x01cb5aff8c38edd8
Faulting application path: C:\Windows\splwow64.exe
Faulting module path: C:\Windows\system32\spool\DRIVERS\x64\3\hpc6r107.dll
Report Id: fc5e617a-c713-11df-bec0-001e8c7ac28b
Log Name:      Application
Source:        Application Error
Date:          9/23/2010 4:10:50 PM
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      XXX.domain.name
Description:
Faulting application name: splwow64.exe, version: 6.1.7600.16385, time stamp: 0x4a5bd3ca
Faulting module name: hpc6r107.dll, version: 0.3.1544.8232, time stamp: 0x4c6af57c
Exception code: 0xc0000005
Fault offset: 0x0000000000076e77
Faulting process id: 0xe68
Faulting application start time: 0x01cb5aff8c38edd8
Faulting application path: C:\Windows\splwow64.exe
Faulting module path: C:\Windows\system32\spool\DRIVERS\x64\3\hpc6r107.dll
Report Id: fc5e617a-c713-11df-bec0-001e8c7ac28b
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-09-23T13:10:50.000000000Z" />
    <EventRecordID>3705</EventRecordID>
    <Channel>Application</Channel>
    <Computer>CHIEF-NT.kp.kpp.com.ua</Computer>
    <Security />
</System>
<EventData>
    <Data>splwow64.exe</Data>
    <Data>6.1.7600.16385</Data>
    <Data>4a5bd3ca</Data>
    <Data>hpc6r107.dll</Data>
    <Data>0.3.1544.8232</Data>
    <Data>4c6af57c</Data>
    <Data>c0000005</Data>
    <Data>0000000000076e77</Data>
    <Data>e68</Data>
    <Data>01cb5aff8c38edd8</Data>
    <Data>C:\Windows\splwow64.exe</Data>
    <Data>C:\Windows\system32\spool\DRIVERS\x64\3\hpc6r107.dll</Data>
    <Data>fc5e617a-c713-11df-bec0-001e8c7ac28b</Data>
</EventData>
</Event>

You'll need to setup 2 things:
- in httpd.conf you'll need to add the config entries to load the jrun
connector module (extract mod_jrun20.so from wsconfig.jar)
LoadModule jrun_module "C:/jrun4/lib/wsconfig/2/mod_jrun20.so"
JRunConfig Serverstore "C:/jrun4/lib/wsconfig/2/jrunserver.store"
JRunConfig Bootstrap 127.0.0.1:51020
AddHandler jrun-handler .jsp .jws .cfm .cfml .cfc .cfr .cfswf
Alias /CFIDE/ "c:/jrun4/servers/cfusion/cfusion-ear/cfusion-war/CFIDE/"
- in jrun.xml enable the JrunProxyService and make sure it's the same
port as the one in httpd.conf
Bafta
Mack

How to charge your Palm Centro via 64-bit Windows, with a USB cable

Here is a way to recharge your Palm Centro on your 64-bit Windows computer, through a USB cable. But first, a few brief explanatory notes...
Note 1: I have successfully used this method to charge my Palm Centro from my 64-bit Windows 7 computer. This method probably works for other Palm devices and other 64-bit Windows versions (XP and Vist)... but I haven't tested this on any other configurations. Others may feel free to post their successes or failures with their setups.
Note 2: This method will NOT allow you to HotSync your Palm to the computer via USB. All it does is let you charge your Palm via USB. If you need to HotSync your Palm, and you have 64-bit Windows, you have to use Bluetooth or some other method. To learn how to use Bluetooth to sync, search for "bluetooth sync 64-bit" or something like that on this forum.
Note 3: If you're wondering why someone would need to use this method - why not just plug the phone into a wall outlet, right? - it's because the Centro's charging jack can get messed up. Mine has not worked properly for the last several months
Note 4: I will not be posting any follow-ups to this message. This is my first (and only) post here... I'm posting here because I am very grateful to this forum: It is here that I learned how (and why) to sync my Centro to my computer via Bluetooth, because Palm doesn't support 64-bit Windows. This is my way of saying "thank you"! I'm not trying to be harsh by not following up... it's just that I won't be checking this thread, and I don't want anyone to have bad feelings if they ask questions and I don't respond. I'll be as thorough as I can in this one posting, though.
Note 5: I cannot claim credit for actually discovering this solution. I found it after HOURS of looking online... it was on some obscure website. Unfortunately, I can't remember where I found the original solution, so I can't credit the discoverer here. However, I have done my best to provide much more detailed instructions here.
Note 6: Lastly, Palm should support 64-bit Windows. Period. Some of you may say, "It's not Palm's fault - the company that makes the Palm OS is Access, and it's Access's fault for not supporting 64-bit Windows." Well, this may be true, but Access has stated that Palm has not requested a 64-bit driver. (In fact, you can call Access and ask them directly.) And if Palm doesn't ask (and pay) for it, Access sure isn't going to create one on its own. I used to LOVE Palm devices... I've used Palms for 12 years now, and for most of that time, I heartily recommended Palms to all my friends. But, between this problem and the other problems I've had with my current Centro and my previous Treo, I'm done with Palm. No more for me.
OK, here's how to charge your Palm (finally!)
1) If you haven't done so already, install the latest version of Palm Desktop / HotSync on your computer. You can get this at palm.com, under the "support" section. (Actually, I'm not sure if this is necessary, but I already had done this.)
2) As you're installing the software on your computer, toward the end of the process, do not actually sync your Palm to your computer. Just cancel or whatever you have to do to avoid that step. (Remember, the whole point here is that Palm does not have a driver compatible with 64-bit Windows, so you won't be able to sync via USB.)
3) If you don't already have it, get the PocketTunes application (also known as "pTunes") on your Palm device. If you have to install the software, you may need to do so wirelessly or via a 32-bit Windows computer (because, again, Palm doesn't support 64-bit Windows).
4) Connect the Palm USB cable to your computer. If you are using a desktop, plug into the USB ports on the BACK of your computer. These ports are directly powered, whereas the ports on the front of your desktop may not be. You'll want as much juice as possible to charge your Palm.
5) Connect the Palm USB cable to your Palm.
6) Turn on the Palm device, and open the PocketTunes application on your Palm.
7) PocketTunes will try to connect to Windows Media Player (on your desktop). Tell your desktop to connect to Windows Media Player. (You can save time by telling your desktop to do this automatically.) When PocketTunes connects with Windows Media Player, you'll have a power connection via USB.
8) PocketTunes will eventually show that it is "Idle" on the Palm.
9) To confirm whether the Palm is charging, look for the charging light (on the Centro, it's on the upper left) to turn solid red. You can also hit the home button on the Palm to see the battery / charging status. To get the charging working, you may have to exit PocketTunes and come back into it a few times before the charging light comes on. I have no idea why you have to do this; I just know what I wind up doing sometimes. You don't have to unplug and replug the phone from the USB cable, or turn the phone off and on. Just leave PocketTunes and come back to PocketTunes.
10) If you exit the PocketTunes application on the Palm, the Palm will still charge - but you'll get the constant and annoying "no driver" noise from Windows. To avoid that sound, just keep the Palm on PocketTunes while you have the Palm plugged into the USB cable.
11) You can close Windows Media Player on the desktop once you have the Palm charging.
12) Once you have this set up properly, you can speed up the process by setting the HotSync cable button to PocketTunes - after all, that button no longer needs to be set up to HotSync via USB cable.
When you have everything set up, here's what you would be doing on a regular basis:
-- Plug USB cable (which is already plugged into your computer) into Palm
-- Hit HotSync button on cable --> This starts PocketTunes --> PocketTunes automatically opens Windows Media Player on the computer
-- See if charging light turns solid red --> If not, exit PocketTunes, then hit HotSync button on cable to start PocketTunes again
-- Repeat until charging light turns solid red (success!)
-- Once the Palm is charging, close Windows Media Player on desktop
Best of luck to all who need this!
Post relates to: Centro (Verizon)

Why do you want to create your own driver instead of what comes with the device? If you go that route, you need all of the low level USB RAW protocol from the vendor. Did you get that? Yoe are wasting your time if you don't have that. Is the driver from the vendor documented? If it's a USB connection, how does that connection show up in windows device manager?

I want to install Adobe PageMill 3.0 on my laptop which runs under Windows Vista but cannot because the original input was on floppy discs, and I don't have a floppy disc drive.

Is Adobe PageMill 3.0 still available? I use it to run three websites but it does not run on my new desktop which has a 64-bit operating system. However it would run on my laptop which runs under Windows Vista. But the original installation was from floppy discs and I do not have a floppy disc drive.

I am sorry Lcosahedron I am not aware of a download location for Adobe PageMill 3.0. It appears it was discontinued in 1999. You can find more details at Adobe PageMill - Wikipedia, the free encyclopedia.

External floppy disk drive

I have an HP F1059C External Floppy Disk Drive by TEAC that came with a (really) old HP laptop. I have some old research saved to floppy disks I need to access. Is there a cable that will convert my External drive to a USP port on my present HP laptop with Windows 8? Do I need a new driver?
Thanks
Oxford Designer

Thank you Dean Huffy. Yes, I recall it was an omnibook. I loved the compactness of the thing. And it had enough heft one could throw it like a brick at someone's head if they made fun of it. Your advice alone is worth the $30 and elegant in its simplicty.
If you have the patience, I would add another permutation to my situation. After the Omnibook's monitor went dark the files were tranferred via it's floppy drive to its desktop successor, for which I ordered a redundant floppy drive for that purpose. There it rested, with some updates, but unbidden for the past five years until the desktop crashed and I replaced it with the present laptop. I took the two units to my local computer repair person who neatly transferred most if not all the contents of the former to the latter, EXCEPT THAT, when I try to open the one, much coveted file, I get a message "cannot convert password protected documents". Okay, so had so much regard for the file I put a password on it, but I can't even get to a point where I can enter a password; and following the Windows advice to "Open and Repair" seems to have no impact.
The bottom line is, I am most grateful for your advice on how to recover the file as of 2001 from an old back-up floppy , but would be even more grateful if I can recover the file through its 2009 updates now on my harddrive (and perhaps a back-up CD.)
Thank you, again.
Hank

Solaris 8 Floppy Disk Drive Problem

Hi to all!, I need help with Solaris 8 10/00 Intel. I�ve installed it and everything works fine, but I cant make the system to recognize the floppy disk drive, everytime I do a "volcheck", it just ignores it. Inside CDE happens the same thing, when I do check the floppy, nothing happens. Any clue?. I�m using an AMD Athlon 700, with VIA KT133 chipset. Thank a lot!.

Try "ftp" + your email address. (but "anonymous" works, too).
Perhaps a typo or there was some other temporary problem with the
web site.
The K7M boards have different bios release numbers, it seems the
first bios release had a revision number of 1007:
ftp://ftp.asus.com.tw/pub/ASUS/mb/slota/k7m
Do you have to boot using the DCA floppy for some specific reason?
(for example to install using the >32GB ide-drive patch; network install
and no local cdrom drive; El-Torito CDROM boot does not work at all)?
Or do you have the system already installed by booting from CDROM,
and you just want to get usable floppy/serial/parallel ports under
solaris 8? In that case have a look at http://www.tools.de/solaris/via/. I've written a small driver that attaches to the VIA
686A SouthBridge PCI/ISA device and it re-enables the Super-I/O
controller on that chip. The Super-I/O chip is disabled due to the
solaris ACPI bug and is the reason all these on-board devices do
not work under solaris 8. According to
http://www.asus.com.tw/products/Motherboard/SlotA/k7m/spec.html, the K7M uses the same SouthBridge chip, so my driver should work for
this board, too.

VIA Rhine NDIS Driver FOR NORTON GHOST

Hi,
I've got MS KT4AV mobo with integrated LAN (driver is VIA Rhine II Fast ethernet).
I have all the drivers on driver CD and you can download them from numerous sites but it's very hard to get the NDIS / DOS driver.
I need to create disc to boot up norton ghost 2003 to work peer to peer.
I've used numerous other LAN cards and drivers and there NDIS2 drivers have always contained an oemsetup file for with setup information.
All the VIA drivers I've found have no NDIS2 folder and the oemsetup file is huge and is not recognised by ghost when i try to setup a NDIS2 bootable disc.
Below is the setup info i had in with my previous SMC network card NDIS2 driver (which worked fine), but with the VIA Rhine driver the information is about 20 pages long and isn't recognised by norton (and it's not in a NDIS file anyway, it just comes with all the driver files).
SMC1255="SMC EZ Card 10/100 (SMC1255TX)",0,ndis,ethernet,real,SMC1255,SMC1255_nif
; Install Sections
[SMC1255]
devdir=?:SMC1255.dos
device=SMC1255.dos,@devdir\SMC1255.dos
[SMC1255_nif]
drivername=SMC1255$
param=SLOT,"Slot number",int,"1,4,1",1
param=MEDIA,"Media Type",text,"UTP,UTP_FD,UTP_100,UTP_100FD,AUTODETECT","AUTODETECT"
Unfortunately I'm not familiar with the correct commands so wanted norton ghost to setup the disc (it always has before).
I found a VIA Rhine NDIS2 drive at the link below but this has no oemsetup file and when i just load the DOS file it doesn't work.
http://www.nu2.nu/bootdisk/network/
Any ides would be appreciated.
Thanks,
Rob

well..i still haven't solved it yet, coz Ghost doesn;t "like" the DOS driver...I e-mailed nvidia as well but its becoming a ping-pong match.
Reply from nvidia:
Quote
Hello,
This support website is designed to support NVIDIA direct sales products, such as the NVIDIA DualTV tuner card
and the NVIDIA PureVideo DVD decoder, and also pre-sales questions about NVIDIA technology.
NVIDIA is a market leader in graphics and digital media processors. NVIDIA does NOT build graphics cards,
motherboards or PCs. While our partners and customers all choose NVIDIA's technology as a core component for
their solutions, they do implement them differently and therefore it is not possible for NVIDIA to directly support their products.
To obtain support, please contact the appropriate manufacturer or vendor of your product. For your convenience,
a partial list of our partners and customers can be found here. http://www.nvidia.com/page/partner_support.html
Best regards,
NVIDIA
My question to them:
I have already downloaded the NDIS.zip as directed by your site to use with Norton Ghost 2003.
There are only 2 DOS files:
NVNDIS2.DOS & NDIS.DOS
I tried building the Ghost Network Boot Disk with each of the DOS files & each time I ger this error:
ERROR: 33 Unable to bind.
I let the Ghost Wizard do the disk build tho' - please see attached build sheet.
Client:   Norton Ghost
Destination:   Floppy Drive A:
Network Driver:
Template:   NVIDIA nForce 4
Driver:   NVNDIS2.DOS
Driver Type:   NDIS2 Driver
Configuration Files:
AUTOEXEC.BAT:
@echo off
SET TZ=GHO-08:00
prompt $p$g
\net\netbind.com
MOUSE.COM
echo Loading...
CD GHOST
GHOST.EXE
CONFIG.SYS:
DEVICE=\net\protman.dos /I:\net
DEVICE=\net\dis_pkt.dos
DEVICE=\net\NVNDIS2.DOS
LASTDRIVE = Z
PROTOCOL.INI:
[protman]
drivername=PROTMAN$
[pktdrv]
drivername=PKTDRV$
bindings=nic
intvec=0x60
chainvec=0x66
[nic]
drivername = UNDIS$

Yokogawa 32 bit Driver

I'm looking for a LabVIEW 32 bit Driver for a Yokogawa 2533 Digital
Power Meter. Is there any out there?
Thanks
Blair
Sent via Deja.com http://www.deja.com/
Share what you know. Learn what you don't.

Were you able to find one? I am still looking for it.

Cinema Display hookup via a Thunderbolt drive

I believe it's possible to run a Cinema Display from my MBP via a Thunderbolt drive, going from the MBp to the TB and then, via a Mini-display to DVI cable, into the display.
I've hooked it up this way with the display also plugged into its power supply and usb'd into the MBP: nothing
When I click 'Find displays' I hear activity in the thunderbolt drive (a Lacie 2big) but that's about it. Nothing shows on the Cinema Display.
I'm doing somethin wrong probably, a familiar scene.
Anyone done this successfully?
(I'm running 10.7.3)

A dvi display with a resolution greater than 1920 x 1200 requires a dual link dvi adapter. I assume you are using a single link dvi adaper (or cable).

Hi transfered my i tunes liberary via a hard drive to my new laptop. It wont let me play anything I've bought from i tunes saying computer is not registered. i have registered it and when i go through the register process it says it is registered?

Help. transfered my itunes liberary via a hard drive to a new lap top. wasnt easy, cant play any thing I bought on the old computer says this one not registered? The box that comes up has my VERY old email on it, I change this to my current one put in password and it says computer is registered. This then just goes around in circles! Any ideas?

I found this article some time ago when I was trying to help someone else in this same situation. This is a copy and paste from the website. The website is provided below for you to read before you try this.
Plug your phone into iTunes
Click setup as a new device
Immediately unplug your phone from the computer
Give it about 30 seconds and iTunes will give a message (I don’t remember the specific, but regarding you unplugging the device and it not completing)
Plug your phone back in
Viola! no restore occurred and you can access everything again
This computer has previously synced with an iPhone or another iOS device.

HT204057 Time machine back up via USB hard drive connected to Airport Extreme.

Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme? It worked very well.

Why did Apple stop supporting time machine back-up via USB hard drive connected to Airport Extreme?
Time Machine backups are supported via USB hard drive connected to the AirPort Extreme"ac" version.
Time Machine backups were not supported via USB hard drive connected to earlier versions of the AirPort Extreme.
Some users who tried this on earlier version AirPort Extremes seemed to have some success with Time Machine backups....some had moderate success and some had no success with this. Count me in the "no success" category.
See the topic about Time Machine support for USB disks in this Apple Support document:
http://support.apple.com/kb/HT5924?viewlocale=en_US&locale=en_US

I have a windows 7 premium with the 64 bit driver and am having problems with installing itunes, i get an error message that states Apple Application Support is required to run itunes. i have tried 4 times to uninstall and reinstall with no success, help

I have a windows 7 premium laptop, 64 bit driver, have tried to install itunes but recieve an error when trying to open. Error states "Apple Application Support is required to run itunes. uninstall and reinstall again, error 2 (windows error 2). have tried this 4-5 times with no success. help!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
tt2

Can't install a 32 bit driver on my new 64 bit server

I have a windows 2008 R2 server runing the print server. I have a HP Laserjet 4345 MFP Printer and can't install the 32 bit driver. I have installed the 64 bit but when I try to add the 32 bit driver is states that it is not the correct driver? I have downloaded the PCl 5 Driver (HP_LJ_M4345MFP_PCL5_32bit) But it states it the wrong driver. Please Help
Thanks,
Dave
David Babbel
System Admin

Hi broadwater,
Could you please re-download the package from this link and then install
http://www.adobe.com/go/tryphotoshop_elements/
Regards,
Sandeep

Windows 7 64 bits driver for hp colour laserjet 2840

Where to find Window 7 64-bit driver for HP Colour LaserJet 2840 all-in-one printer full complete version?

Hello B-I-F,
The drivers for the HP Color Laserjet 2840 are already "built" into Windows 7. Here is a link regarding how to install them:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536257
Also, for future reference, the HP Color LaserJet 2800 All-in-One Printer series are commercial printers. I recommend posting in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

HP Laserjet 1012 Windows 7 64-bit Driver

I cannot find a Windows 7 64-bit driver for my Laserjet 1012. Has anyone else had any luck?

Win 7 X64 works with my Trusty HP Laserjet 1012.
From Start/Devices and Printers.
Choose add a printer.
Had to use Windows update at the bottom of the install printer driver window because the HP Laserjet 1015 was not on the list of HP printers. But after the update there it was "HP Laserjet 1015".
I did the intstall and it is working on my Win7 x64 machine and Office 2010. By the way, I chose Generic IEEE 1284.4 as the printer port (See comment below)
If you look on the HP website, they show the most recent drivers only for Vista x64 but the drivers are for the HP Laserjet 1010, 1012, 1015. So 1015 drivers will work but I did the install through Windows add printer as stated earlier in this thread and seems Win7 offers support for this legacy printer.
Comment:
Oddly the HP HP Laserjet 1012 also shows in unspecified devices on the Devices and printers page and did so before I installed the printer...I could not delete it but right clicking and Running Troubleshout gave me the choice to fix it saying "The driver for Generic IEEE 1284.4 printing support is not installed. Install the latest driver for the device." I believe chosing Apply this fix would have made it work. I am hoping on reboot it dissapears from unspecified. I will repost later

FRUSTRATED - windows 7 64 bit driver HP 6500 709e all in one won't install on 2 computers

Hi,
My son and I both got new laptops for Christmas. I have had nothing but problems installing our wireless printer with its full features. My son's computer is a Dell, mine is a Toshiba. From what I could find both needed the same driver but both have had MAJOR issues getting the install to complete and installing the device. Somehow I was able to get it installed on my Toshiba but the "fix" I used didn't work on the Dell. PLEASE HELP! Thanks
Carol
Sorry I realized I did add much information. The printer is the 6500 all in one deskjet 709e. I have tried installing the 64 bit, windows 7...i also downloaded the update. Eventually it worked for my Toshiba laptop but still can't get it to install on my son's dell.
After numerous tries,
I downloaded the driver for windows 7, 64 bit driver and then downloaded the update. The driver/software wouldn't install the device until I did the update (for my Toshiba) but this is not working for the Dell. Also I did download the troubleshooter and it was useless!

Welcome to the HP Forums Zoney,
I read your post which indicates that you are getting a "MICROSOFT VISUAL C ++RUNTIME LIBRARY" error, when trying to install the printer software. I can help you with this.
Download and install this Patch> Microsoft Visual C++ Runtime Error.
Uninstall the printer software.
Before installing the printer software again, setup the Admin rights on the computer.
Run Command Prompt as Administrator. Go to the start menu, type “CMD” in the search bar. Now, you should see a shortcut for CMD above. Right click on it, and click “run as administrator”. If it asks you for administrative permission, please allow permission. In your Command Prompt window (as administrator), type the following and hit Enter: net user administrator /active:yes
You should see a message saying "the command completed successfully". After troubleshooting is done, you can disable this account by typing the following command into Command Prompt (as administrator): net user administrator /active:no.
Restart the computer, and utilize the new account that is available, which should be named "Administrator".
Here are some more steps you can try if you are still getting the Runtime error.
But it is looking more like a Operating System issue.
Download and install the Microsoft Visual C++ 2010, 2008 and 2005 Redistributable Packages.
You will find the download links to these packages below:
2005 - http://www.microsoft.com/en-ca/download/details.aspx?id=26347
2008 - http://www.microsoft.com/en-ca/download/details.aspx?id=5582
2010 - http://www.microsoft.com/en-us/download/details.aspx?id=14632
Try the installation again please.
Let me know how you make out.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Via Floppy 64 bit driver

Similar Messages

Maybe you are looking for