Via (for external connection) does not connect to copper plane

I am trying to place a PTH via for external connection. This via suppose to connect to the ground plane (net 0). However, I am having trouble to assign this via to net 0. It always leave a gap between the via and the copper plane.
Please help!!!!!
Jake
Attachments:
Via to GND plane.JPG ‏48 KB

Try this...
In the via properties window, to go the Via tab. Click the checkbox next to "Assume Net" and then select net 0 from the drop down list.
Hg

Similar Messages

  • Mapping Network Drive for external user does not work

    I want to map a beehiveonline.oracle.com network drive. I am using https://beehiveonline.oracle.com/content/dav/# as mentioned in the FAQ.
    Using https://beehiveonline.oracle.com/content/dav/ (without the #) does not work either.
    I am able to map this network drive when using [email protected] as user.
    However when trying to do this for the user [email protected] I am not able to map the drive.
    I am testing this in order to simulate the client to map the network drive.
    Logging on the beehiveonline with the user id [email protected] works fine.
    Your help will be greatly appreciated.

    Ah, We have had one other case of this where an account can access BeehiveOnline OK but cannot get the webDAV to work.
    I did notice a few login failuers stating your account did not exist on the system. This can sometimes happen if there is a conflict between username and loginid - I have set them to be the same and this may help.
    Try again and let me know how it goes.
    Phil

  • Been trying to use an external memory card reader with my macbook air- connecting via usb port, air does not recognize device nor the microSD card from my gopro - help

    Been trying to use an external memory card reader with my macbook air… connecting via usb port, air does not recognize device nor the microSD card from my gopro … help

    Some external ones do not work with the Mac's although most do. There are some driver compadibility issues with Mavericks, so I would wait for an update.

  • Ports for External Connection

    Hi, i have one problem, i dont know what's ports i need to open in my modem for one user in other network connect in my network. I need to make a NAT for this, but i need to know apple remote port for external connection. And sorry for my english, bad.
    thank's.

    You need to open TCP and UDP port 3283 and, for ARD 2.0 and later, TCP and UDP port 5900. For encrypted file transfer (ARD 3.x), open TCP port 22. You may also need to open TCP (and perhaps UDP) 5988 and 5989, though it's not clear under what circumstances this will be necessary.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
    Regards.

  • My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

    My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested.  How can there be audio issue for all these devices at the same time?
    As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

    Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
    I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
    What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
    Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
    Peace,
    P. Dreadie

  • I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???

    I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???

    The TIme Machine volume does not have that checkbox.
    I think the issue is with your Finder...
    Go to Finder "Go" menu hold the option key and choose Library. Then go to Preferences trash these files:
    com.apple.finder.plist
    com.apple.sidebarlists.plist
    Then, restart, or log out and in again.
    (You will have to reset a few finder prefs the way you like them.)

  • I want to copy images to a memory stick for sharing with my family. This was possible in iPhoto via copy/paste but does NOT seem to be possible with photos...

    I want to copy images to a memory stick for sharing with my family. This was possible in iPhoto via copy/paste but does NOT seem to be possible with photos...

    You can drag and drop (this will result in a compressed JPG) or hold the alt key and drag and drop (this will copy the original). You can also select the pictures and choose Export from the File menu.

  • Running Time Machine for the first time, how that I make sure that some information I have in the external drive does not get erase in the prosess

    Running Time Machine for the first time, how that I make sure that some information I have in the external drive does not get erase in the prosess

    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Note: This is now your Library. It's not a Back Up, and you need another disk for backing up.
    Regards
    TD

  • With iTunes 10 and iOS 5 synchronizing my iPhone (3GS) via USA and Wifi does not stop in the last step. Runs for hours. iPad Synchronization is fine. Any ideas to solve it?

    With iTunes 10 and iOS 5 synchronizing my iPhone (3GS) via USA and Wifi does not stop in the last step. Runs for hours. Even canceling takes forever.
    iPad2 sync is fine.
    Any ideas to solve it?

    This sounds like a problem you should take up with Apple Customer Support.
    The other users like yourself here are not going to be able to help you with this problem.
    Allan

  • I have the new macbook pro from late 2011. when i try plugging my cannon gl2 into the mac via firewire 800 it does not show up in iMovie as an option to import from. i even have gone into my settings on the camera and changed it to vcr.

    I have the new MacBook Pro from late 2011. "the one before the new ritina display" i have a cannon gl2 video camera which is mini dv. when i plug it into my mac via firwire 800 it does not show up in the iMovie. i have set the settings on the camera to vcr mode and changed it to av->dv out. when i click on the import from camera on imovie it doesnt even show my camera in it. it just gives me the option to import video from my facetime camera. the camera is turned on the wires are connected i know for fact that its a firewire and not a usb. i know what they each look like. i bought the firewire cable and it was marked down cause it was an opened and used item. would it be possible that it could be deffected and if that is not the reason what other options do i have?

    I would say that odds are high that you have a bad cable. Maybe that is why they returned it.
    I would suggest trying a different firewire cable.
    You can find Firewire cables inexpensively at monoprice.com. You need a 4 pin to 9 pin firewire cable.
    Here is a link.
    http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10301
    Other things to check:
    Is your camera plugged in to wall power (not to batteries only). Must be hooked to an AC power source to import.

  • Im trying to find my iPhone via iCloud but i does not show a map with its last know location. It only shows the menu options. My iPad and Mac show up but the map of my iPhone does not.

    Im trying to find my iPhone via iCloud but i does not show a map with its last know location. It only shows the menu options. My iPad and Mac show up but the map of my iPhone does not. Can anyone help?

    If your phone is turned off or not connected to the Internet, you will be unable to locate it. Last known location is only stored for 24 hours.

  • How do I know WinRM uses Kerberos for authentication, and does not fall-back to NTLM?

    Hi,
    How do I know WinRM uses Kerberos for authentication, and does not fall-back to NTLM?
    /SaiTech

    Hi SaiTech,
    Kerberos will be selected by default in an AD domain, The default (assuming the client is in a domain, and is not connecting to itself via 127.0.0.1 or ::1 addresses) is to use Kerberos authentication, and not to fall back to NTLM.
    Please also Note that you may have to take some other steps as well to get non-Kerberos authentication working.  Specifically, you'd have to set up an HTTPS listener on the remote host, or modify the client's TrustedHosts list.
    Refer to:
    WINRM kerberos & Negotiate
    Authentication for Remote Connections
    In addition, you can also use Network Monitor to check the authentication method.
    If there is anything else regarding this issue, please feel free to post back.
    If you have any feedback on our support, please click here.
    Best Regards,
    Anna Wang
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • The file required for contribute compatibility does not exist on the server

    Hi, when connecting to a server in Dreamweaver that is set up
    for Contribute I keep getting this message when putting files:
    quote:
    The file required for contribute compatibility does not exist
    on the server. Would you like to turn off Contribute compatibility?
    I see the post from jonbradley below, but the solution
    suggested doesn't help me:
    Does anyone have any idea what this means and how to stop it
    from displaying?
    Thanks in anticipation...
    Simon

    Did you search the forum on compatibility?
    http://www.adobe.com/cfusion/webforums/forum/searchresults.cfm?requesttimeout=500&cate gory=290&forumid=55&FTVAR_KEYWORD1FRM=compatibility&FTVAR_SEARCHWHATFRM=c& FTVAR_RESULTTYPE=topics&FTVAR_AUTHORFRM=&FTVAR_TABLECHOICEFRM=current&FTVAR_CA TEGORYIDFRM=290&Selection=false&FTVAR_DATESELFRM=Select&FTVAR_STARTDATEFRM=&am p;FTVAR_ENDDATEFRM=&cal_d1=0&cal_d2=0

  • My external HD does not mount despite it appears on Disk Utility

    I have been using an external HD to keep my video library. Just this week I updated my library and everything was OK, but when I tried to see the videos on my mediaplayer the disk didn't appear. I connected it again to my iMac but now the external HD does not mount. I tried Disk Utility, the disk appear gray on the sidebar but it doesn't mount. I run Repair but I get the b-tree node size error and the disk still does not mount.
    Please help!!!!

    If DiskWarrior can't fix it, you might try Data Rescue II...
    http://www.alsoft.com/DiskWarrior/
    http://www.prosofteng.com/products/data_rescue.php
    (Has a Free Demo to see if it could or not, but you'll need another drive to recover to).
    Or FileSalvage...
    http://www.subrosasoft.com/OSXSoftware/index.php?%20mainpage=product_info&productsid=1
    to recover what you can.

  • My dvd slot for imac10,1 does not work. It rejects the disc. Problem after reinstall of backup from hdd.

    My dvd slot for imac10,1 does not work. I had a new harddrive installed in November and the MacStore installed my backups from an external harddrive. I do not use it other than to upload programs, so I have not tried using it until tax season, but it rejects the disc. The ata file indicates no dvd firmware, but the serial-ata does indicate firmware for a dvdrw. What might I do about this to bring the dvd back, least expensive to most?

    Yesterday I started having the same problem. Can read disc (play movies and music) but blank disk are ejected or idvd cannot see the blank disk. I have a almost 12 month old 27" i7 imac.

Maybe you are looking for