[VIA] How to make WOL work on KT6 Delta FSR?

Hi.
i've got MSI KT6 Delta-LSR motherboard (with ethernet network card on board), but i cannot make WOL (WakeOnLan) work. I don't know if the reason could be in misconfigured BIOS or the network card itself doesn't support WOL.
i have WinXP Pro and i have set "Wake Up Capabalities" to "Magic Frame" on network card in Device Manager, but WOL still doesn't work.
how and what to set up to make WOL work?

Quote from: Fredrik Åsenius on 06-June-05, 07:43:08
"The network's card..." Do you have an external card? If so move it to another PCI slot. I haven't the manual in front of me, but isn't there a place where to attach a cable from the NIC to the mobo? On my old ASUS I know there is one.
You must also in BIOS, under Boot/Boot sequence, have LAN as one of the options. I don't know if it should be before hard disk, maybe first, or after.
What is the name and amperes of your PSU?
Edit: You don't think it is much info., but that was what I was thinking about when I said so. You should also find something about it - I'm not sure - in where the mobo layout and all its connections is described.
http://www.annoyances.org/exec/show/article04-101
"The network's card..." - I mentioned it is onboard NIC (not extra PCI card)
Man, I don't what's your point. My initial question was, that WOL doesn't work (everything else is fine). I really don't think that it could be in PSU since PC has to be shut down to "use" WOL. (I bought case with PSU inside, so I don't know the "name", but it is ATX 2.03 copliant)
You mentioned ASUS? Fine, but we're talking about MSI in MSI forum.
Why do you think, that boot sequence has something to do with WOL?

Similar Messages

  • Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

    Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

    If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
    Not necessarily.  That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
    If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio.  You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise.

  • TS2634 I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?

    I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?

    I have the same problem.
    Two similar discussions:
    https://discussions.apple.com/message/23081658#23081658
    https://discussions.apple.com/message/23281391#23281391
    I have not yet seen any official response to the question: "Is the Apple AV Composite cable fully supported with 30pin connector devices upgraded with iOS7 - specifically ? - eg. iPad 2, iPhone 4, iPhone 4s"
    If it is not currently supported is that then due to a bug / oversight and in that case is it something that will be fixed in the near future?
    Please let us know what feedback you got from asking Apple support.

  • How to make buttons work in Interactive Adobe Forms

    Hi Experts,
    I am new to interactive form. Though i have worked in normal/non-Interactive form, i do not know how to make buttons work in interactive adobe forms using ABAP  (I don't know JAVA). Can any one help me out and walk me through to how to code in ABAP to make buttons work.
    Kind Regards,
    Sharat.

    Please refer to my earlier post ... You will get an idea
    Please refer to the below thread for detail solution
    Sample Interactive form example ?....urgent...
    Cheers
    Satya

  • Deleted itouch files using ifile from cydia. i restarted it but now it shows the apple logo and that is it... it doesnt respond. any ideas of how to make it work?

    I restarted my itouch using the home button and top button...it restarted but it only shows the apple logo and that is it.  I deleted all files from ifile and then it froze... any ideas of how to make it work again?

    Discussions of hacked ipods is not permitted here.

  • I have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?

    i have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?

    Who was your original carrier; did you call them to ask them to unlock your phone, and are you aware of what their unlock policy is (THey may only unlock for international sims and not US sims

  • HT201343 My mac is OS X 10.6. has not airplay. how to make it work?

    My mac is OS X 10.6. has not airplay. How to make it work?

    OS 10.6 is Snow Leopard, which does not support Air Play.  If you upgrade to OS 10.7 Mountain Lion (which is what you list in your category) then you may be able to use Air Play depending on the age of your computer. 
    See this document:
    http://support.apple.com/kb/HT5404

  • Today my money is deducted Rs.60 when I try to download paid applications of any amount and I am getting message transaction declined, so why my money is deducted. I lost almost Rs 480 rupees . So how to get refund and how to make card working?

    Today my money is deducted Rs.60 when I try to download paid applications of any amount and I am getting message transaction declined, so why my money is deducted. I lost almost Rs 480 rupees . So how to get refund and how to make card working?

    Today my money is deducted Rs.60 when I try to download paid applications of any amount and I am getting message transaction declined, so why my money is deducted. I lost almost Rs 480 rupees . So how to get refund and how to make card working?

  • How to make tablesorter work for GroupedColumns??

    Hi all,
    I imported the class of TableSorter.java to my project. It automatically picks up my normal columns, they all can be sorted.
    but the groupedColumns generated by the drag and drop table node into the design area wont pick up, even i set the property of "onAction" of the column to "Sort"(method) it wont sort the content for me.
    how to make it work?
    thanks

    hi!
    you can get lead selection in the action handler then inset your code for currentContextElement.
    wdContext.currentContextElement().getTableSorter().sort(wdEvent, wdContext.nodeXXX());
    thanks
    vishal

  • How to make rss work

    So, I'd like to get RSS working on my iMac. When I click on an RSS logo/button, I get the message "No associated application could be found." HUH??? Any idea on how to make RSS work??? In either Safari or Mail.

    RSS has been removed from Mail and Safari in Mountain Lion, so you will need to use a thrd party application such as Vienna.

  • How to make MDM work?

    Hi Guy,
    I'm newbie for MDM.I already intalled it on my machine(Window Xp)but dunno how to make it work.
    The installed components are MDM/Syndicator/Import server,Console/Import mgr/Data mgr/Syndicator.
    Do I have to install any component else?And Can you guy give me any guides/documents/Posts how to make it work.Cause I have to demo it next week but right now still blank about it...
    Thanks
    Parinya.

    Hi Jack,
    For Demo Purpose,
    1.Create few master records in R/3 Servers [ MM(Tcode MM01) /Employee(PA40) /Vendor(Xk01) /Customer(XD01) according to your MDM Repository(For Example "Products").]
    2.Extract those master datas from R/3 Servers.
    3. You will get the xml file of master datas.
    4.Open the import manager and import the xml file into  the MDM server.
    5.In Import manager ,you need to map the records[Source Fields(Imported records) VS Destination Fields(MDM repository)].
    6.Once you imported the record ,u can see the records in the MDM Data manager.
       We can Create/edit/Delete those records .
       We can merge the records for consolidation purpose.
       We can perform Data enrichments process   like Validation,Workflow,Assignments..etc.
    7.Once cleaned the Master records,it is ready to distribute to R/3 servers.
    8.Syndicator is used for sending data back to the R/3 servers
       Here also we have to do Mapping against R/3 servers.
       Using XI We can connect the R/3 Servers.
    Hope u will understand this.
    This is very simple example for MDC-MDH Scenario.
    For futher learning on how to create a repository/Enrich the mater datas, go through reference documents in the Service Market place.
    Best Regards
    Devaraj PK

  • How to make stylesheets work ???urgent

    Hi,
    How to make stylesheets work.I tried including the CSS file on the
    header
    <%@ include file="stylesheets.css" %>
    <%@ include file="stylesheets.inc" %>
    and both options does not work. can somebody tell me what is wrong here.
    Thanks
    jack

    Hi,
    below thing does not work ?? any idea ??
    <TITLE>IBMSWG - <%= childCategoryListBean.getCurrentCategory().getName() %></TITLE>
    <META NAME="Keywords" CONTENT=" passive, components">
    <META NAME="Description" CONTENT=" varistors">
    <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
    <link rel="stylesheet" href="stylesheets.css" type="text/css">
    <script language="JavaScript">
    <!--
    function xxx
    Thanks
    jack

  • How to make Matlab work after loading Yosemite ?

    How to make Matlab work after leading Yosemite on a Macbook pro ?

    R2014b should work with Yosemite. What version do you have?

  • TS1292 i got an itune card after I hit the pin in it show invalid number, so how to make it work?

    I got an itune card after I hit the pin in, it show invalid number so how to make it work?

    See Here  >  iTunes Store: Invalid, inactive, or illegible codes
    http://support.apple.com/kb/TS1292

  • HT5559 JAVA WITH CHROME!!! I am trying to login to my bank account at nordea.dk. This website uses somekind of java thing. Chrome cant't load it. Works perfect with Safari. How to make it work in Chrome?

    I am trying to login to my bank account at nordea.dk. This website uses somekind of java thing. Chrome cant't load it. Works perfect with Safari. How to make it work in Chrome?

    Do you speak of true blue Java or Javascript?  If the latter then it is a problem with the Browser.
    But if it is the real Java, do you have the offical version of Java from Oracle installed?
    Getting applications to see official Java is a nightmare.  If you install the Runtime Environment only (JavaRTE) most applications do not see it.
    To force offical Java system wide, I found you have to install the Java Developer Kit (JavaJDK).  It's a larger install as it also comes with documentation and compilers but it make offical Java system wide.

Maybe you are looking for

  • Inserting more data records at a time to a portaldatabase

    Dear SDN's, I am working with sql server on JAVA side i.e., as a portal web database. I want to insert a level of some 100 records at a time to a database. what is the best way of inserting other than entering all the values manually/using a insert p

  • Any idea what happened to the "Show All " button in my organizer ?

    I am still very much a rookie at all of this so please bear with me. I have been working my way through the lessons in the "Photoshop Elements 7 Classroom in a Book" publication, and am on Lesson 3,page 106,  step 4, of the "Viewing and Managing File

  • ICLOUD AND MOBILE.ME MAILBOXES

    I'm running 10.6.8 so I'm not icloud native. I had mobile.me and had 3 mailboxes set up. When i migrated to icloud it only kept my primary and I lost the other two and cannot for the life of me i can't figure out how to get them back. Any ideas?

  • IMAQ: "image to array" directly wired to "array to image" seems to have a pb with U16

    Hello. I am using the two VIs "ImageToArray" (ITA) and "ArrayToImage" (ATI) to do some image processing, and I've noticed something strange I'd like to share with you. I am acquiring 16bits data from a GiGe camera. If I wire the output image of the c

  • Cascade Update in Oracle Constraint ?

    How can I create a Constraint in Oracle 9i with Cascade Update Option like On Delete Cascade. It means, if I change the primary key of master table, the foreign key of all the relevant child tables should be updated automatically. Any idea please ? B